Problem when try to use 2 computers

Hello there.
I'm now facing a problem when try to use 2 computers. Specifically, I downloaded my ebook (pdf form) in my laptop and open it without problems. But when I tried to reopen the same book (from human kinetics site) to my pc, the known message revealed ("E_LIC_ALREADY" etc etc).
As I realised, in my laptop, the ADE wasn't authorized (in fact, "is authorized without an ID"). I tried but didn't achieve to authorize it (it's not accepting my username and password, saying that the specific ID is already used, obviously when I made the similar procedure on my pc, a year ago), whereas I'm also not able to re-open the book in my pc (I made copy-paste to the appropriate folder of my pc, by the way...). What's the solution in this case? I mean, it's very annoying for me and I desperately want to solve it...
Thank you in advance,
Nikolas

Answer 1 : Really not quite sure about this ....
Answer 2 : turn the card upside down and check the model number .. the model number would be WPC54G and if there v2/v3/v4 after it it means that the card is version 1 ....
Answer 3: As you windows xp , go to start >> programs >> uninstall wireless notebook adapter.... insert the CD for the adapter ...take the card out and insert it back again.... follow the instructions on the found new hardware wizard ... this will install the drivers for the adapter and then you can use the windows wireless configuration utility to connect to the wireless network ....

Similar Messages

  • Problem when try to use ACSE+ Windows AD to authenticate two kind of WLAN c

    I met a problem when try to use ACSE+ Windows AD to authenticate two kind of WLAN clients:
    1. Background:
    We have two WLAN: staff and student, both of them will use PEAP-MSCHAPv2, ACSE will be the Radius server, it will use Windows AD's user database. In AD, they create two groups: staff and student. The testing account for staff is staff1, the testing account for student is student1.
    2. Problem:
    If student1 try to associate to staff WLAN, since both staff and student WLAN using the same authentication method, the auth request will be send to AD user database, since student1 is a valid user account in AD, then it will pass the authentication, then it will join the staff WLAN. How to prevent this happen?
    3. Potential solution and its limitation:
    1) Use group mapping in ACSE(Dynamic VLAN Assignment with WLCs based on ACS to Active Directory Group Mapping), but ACS can only support group mapping for those groups that have no more than 500 users. But the student group will definitely exceed 500 users, how to solve it?
    2) Use methods like “Restrict WLAN Access based on SSID with WLC and Cisco Secure ACS”: Configure DNIS with ssid name in NAR of ACSE, but since DNIS/NAR is only configurable in ACSE, don't know if AD support it or not, is there any options in AD like DNIS/NAR in ACSE?
    Thanks for any suggestions!

    I think the documentation for ACS states:
    ACS can only support group mapping for users who belong to 500 or fewer Windows groups
    I read that as, If a user belongs to >500 Windows Group, ACS can't map it. The group can have over 500 users, its just those users can't belong to more than 500 groups.

  • I have a problem when try to select any of option from menu bar

    I have problem with mozilla since last update. When try to use any of options from menu bar, this appears:
    http://www.dodaj.rs/f/1p/Sl/1jR36iaa/mozilla-firefox-bug.png
    Also, i uploaded video to show how my problem appear.
    http://www.youtube.com/watch?v=shZGaZ0-_po

    thanks for reporting back with your details - turning off HWA might have slight negative effects on the performance/rendering speed of the browser but it shouldn't impact any functionality.
    i've seen a handful similar threads by users mentioning this issue since they've upgraded to firefox 18. so when it is a widespread problem, mozilla might further investigate this & offer a fix in a later version...

  • Java.lang.NoSuchMethodError when try to use RDBMS WLI adapter sp2

    Hi,
    We have encountered a problem when trying to use the latest version of the WLI
    RDBMS adapter downloaded from the website.
    This adapter comes as an ear file of size 4026K.
    Has anyone been able to get this version to work??
    Was using the earlier version of size 3278K happily but found a few bugs in it
    so wanted to use the later version but when we do, we can't call any Application
    View services.
    When we try to call a service we get the error:
    java.lang.NoSuchMethodError at com.ibi.beardbms.cci.InteractionImpl.execute(InteractionImpl.java:217)
    at
    com.bea.adapter.cci.AbstractDocumentRecordInteraction.execute(Unknown Source)
    at com.bea.wlai.client.bean.ApplicationViewBean.executeRequest(Unknown Source)
    at com.bea.wlai.client.bean.ApplicationViewBean.executeRequest(Unknown Source)
    at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(Unknown Source)
    at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(Unknown Source)
    at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(Unknown Source)
    at com.bea.wlai.client.bean.ApplicationViewBean_g38mgs_EOImpl.invokeService(ApplicationViewBean_g38mgs_EOImpl.java:732)

    Hi Adam,
    You need to get Patch CR095687 in order to use this adapter with SP2, (and
    stop this exception). It's mentioned in the release notes
    (http://edocs.bea.com/wladapters/rdbms/docs70sp2/pdf/relnotes.pdf), a the
    bottom of page 3. You need to contact BEA support for this patch.
    Dave
    "Adam Finlayson" <[email protected]> wrote in message
    news:3ea8f771$[email protected]..
    >
    Hi,
    We have encountered a problem when trying to use the latest version of theWLI
    RDBMS adapter downloaded from the website.
    This adapter comes as an ear file of size 4026K.
    Has anyone been able to get this version to work??
    Was using the earlier version of size 3278K happily but found a few bugsin it
    so wanted to use the later version but when we do, we can't call anyApplication
    View services.
    When we try to call a service we get the error:
    java.lang.NoSuchMethodError atcom.ibi.beardbms.cci.InteractionImpl.execute(InteractionImpl.java:217)
    at
    com.bea.adapter.cci.AbstractDocumentRecordInteraction.execute(UnknownSource)
    at com.bea.wlai.client.bean.ApplicationViewBean.executeRequest(UnknownSource)
    at com.bea.wlai.client.bean.ApplicationViewBean.executeRequest(UnknownSource)
    at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(UnknownSource)
    at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(UnknownSource)
    at com.bea.wlai.client.bean.ApplicationViewBean.invokeService(UnknownSource)
    atcom.bea.wlai.client.bean.ApplicationViewBean_g38mgs_EOImpl.invokeService(App
    licationViewBean_g38mgs_EOImpl.java:732)

  • I just installed yosemite on my mcb pro mid 2012 and installed win8.1 with bootcamp. now i have the problem, when i'm using windows i don't see my mac partition in the "computer" window. there is only the "bootcamp (c;) partition? what's the problem?

    i just installed yosemite on my mcb pro mid 2012 with a clean install. so i only had the new os x yosemite running on my mac. everything went perfect. than i installed win8.1 with the bootcamp assistant and also everything went perfect.
    But here's the Problem:
    When i'm using Windows 8.1 and i go to the "Computer" window where i can find my hdd partition "Bootcamp (c;) there is only this Partition. the mac Partition is missing.
    so i am not able to read the files on my mac Partition.
    Before i installed yosemite and win8.1, i was running mavericks and win7 on my macbook pro and i haven't had this Problem. i was able to see and read my mac Partition also on Windows 8.1???
    is there any solution for this Problem???
    greez c

    "Before i installed yosemite and win8.1, i was running mavericks and win7 on my macbook pro and i haven't had this Problem. i was able to see and read my mac Partition also on Windows 8.1???"
    Sorry there's a mistake in the sentence!
    i mean:
    "Before i installed yosemite and win8.1, i was running mavericks and win7 on my macbook pro and i haven't had this Problem. i was able to see and read my mac Partition also on Windows 7???"

  • Flashplayer in computer,when try to use,says needs to be installed ??

    flashplayer in computer,but says needs to be installed when try to use it ????

    Need to know:
    Your operating system (Win, Mac, xpXP, Vista, 7, 8)?
    Your Browser (IE, Firefox, Chrome, Opera, Safari)?
    Any error messages?
    Green screen in place of video?

  • Wheni try to use the VHScrCap as video the Adobe flash media live encoder 3.2 just closes?

    Wheni try to use the VHScrCap as video the Adobe flash media live encoder 3.2 just closes?
    how do i fix this?

    Moving the discussion to Flash Media Forum.
    Regards,
    Anit Kumar

  • Error when try to use cmd tools (copylocale, mxmlc, etc)

    Hi guys,
    I have a Windows 7 64Bits with Java Jdk 1.7.0_25 64Bits (with Jre).
    When I try to use cmd tools that came with Flash Builder 4.7, I get the following error:
    Command: copylocate en_US pt_PT
    Error:
         Error loading: D:\Software\Java\jdk1.7.0_25\jre\bin\server\jvm.dll
    The same error occore when try to use mxmlc.
    I have the JAVA_HOME defined with D:\Software\Java\jdk1.7.0_25
    I allready try to reinstall everything and show me the same error.
    Can anyone help me?
    Thanks,
    Pedro Quintas

    Hello again Joe Bo... and all of others,
    I´m with a doubt after installing the CPU patch, which is related to post-installation tasks. I´m in this momment install the SAP System and it was during this installation that sapinst asked me to install the database and all other activities after this installation that are related to the database, for example, the updating of database patches.
    At README file in chapter 3.3.2 Post Installation Instructions is described the following:
    After installing the patch, perform the following actions:
    1.Load modified .sql files into the database, as explained in Section 3.3.2.1.
    2.Recompile views in the database, if necessary, as explained in Section 3.3.2.2.
    In this momment, as you certainly know, I still don´t have a database because the sap system isn´t yet totally installed (I´m in phase 8 of sapinst wizard).
    I only have to do this "Post Installation Tasks" when I have a database, this database will be created after that phase 8 - so now I don´t need to perform the post steps... am I right?
    Thanks in advance,
    João Dimas - Portugal

  • HT201415 actually i am use iphone5 in bangladesh. But i am facing some problem , when i am useing the internet over cellular data network. when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device pr

    actually i am use iphone5 in bangladesh. But i am facing some problem , when i am useing the internet over cellular data network. when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?

    Hafizur Rahman wrote:
    when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?
    Problem? I'm not even sure what your problem is, much less whether it's a problem with the phone or the carrier.

  • I have an audio problem when ever I use my Firefox web browser that makes a sharp audible sound simiular to a video game gun shot sound effect when ever I go into a new web page?

    I have an audio problem that when ever I use my Firefox web browser it makes a sharp audible sound similar to a video game gun shot sound effect when ever I go into a new web page? I change to a new site or page a page on a site, I get an audible gunshot ping trpe sound? It happens almost every time. Its very annoying and is driving me nuts???
    Any body out there had this happen also or know how to diagnose and fix this type of problem? I would hate to have to delete my whole Firefox program and have to start over again. If that is the case I will probably just scrap it and go on to try Google Chrome instead. I already have GC partially set up. I really have liked Firefox up to this point. I know add ons can cause problems at times but I haven't added anything new lately and this just started happening?

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode].
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
    Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > '''Use hardware acceleration when available'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Options > Advanced]. All these settings/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme or hardware acceleration is causing issues.
    [https://support.mozilla.org/en-US/kb/Options%20window Options]

  • Teststand problem when try to close a modified seq file.

      I have a problem when using Teststand. My seq file consists several custom step types, which call external DLL/VIs. The problem is every time when I modified this seq file and tried to close it without save it, Teststand will always popup a warning dialog "Unable to discard seq file, because it is in use", please see below. Hope somebody here could give me some suggestions on it and tell me how to resolve this problem.
    Thanks!
    Jacky
    Attachments:
    screenshot1.JPG ‏108 KB

    Hi Ray
      Attached is the structure I used in Teststand. Here I want to describe my problem once again:
    Case1: if I open a seq file and then close it, there will be OK
    Case2, if I open a seq file and insert some custom step types, then close it, it will be OK.
    Case2: if I open a seq file and run it, then try to close it, but without any chang, there will popup a dialog"unable to discard this seq file,because it is in use...."
    Thanks!
    Jacky
    Attachments:
    Structure.jpg ‏13 KB

  • Sign in problems when trying to use Skype WiFi

    I have a tablet that I am trying to connect to Skype WiFi and keep getting looped around to the sign-in screen.  It tells me "You're already on line", but I can't do anything after that.  I just have the "Learn More" button.  I have unstalled and installed Skype WiFi twice and it still will not open.  None of your instructions or guide are helping me.
    Need Help
    Added the text, "...when trying to use Skype WiFi" to the subject/title for clarity.

    hi,
    The call to the function 'wwpre_api_util.get_names_table' is not returning any data. so, you are getting an exception. Try adding an exception block for NO_DATA_FOUND and print some message.
    --Sriram                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Problem when try to start SQL Developer

    I have problem when I clicked to start the SQL Developer. It wants me to enter the full pathname for Java.exe. Could some one tell me what should I enter.

    Thank you for your help. I don't have the C:\Program Files\Java\jdk1.6.0_11\bin\java.exe in my machine.
    I checked and found that the SQL Developer I have use Java 1.6.0_11 which is same as you have mentioned. I have the path
    "C:\Program Files\Java\jre7\bin\java.exe" in my machine. When I enter this path, there is a message say Cannot find J2SE SDK installed at path.
    Does this mean that I need to install java 1.6.0_11 ?

  • Problems when creating form using wizard

    i use the data block wizard to create a form but one of my field, i use a radio button.in the layout editor, the radio button did not appear.how can i make it appear on my screen?
    i have another problem.
    how can i use the colunm of two tables when using data block wizard to create one data block?

    Hello Nicky,
    You can place the "Signature Field" in the form and ask your users to sign the file before submitting it via email.
    Regards,
    Anoop

  • Acrobat XI Pro is requesting a password when try to use

    If I open Acrobat XI from my Start Menu, It comes up with the program possiblities (edit open, etc). The first time I try to use it, it goes to a screen with Acrobat XI trial; I click on License this software, and it as me to sign in. Then it comes up with a request for Serial Number. Any suggestions would be appreciated

    I'm assuming you did subscribe before, you aren't just testing the trial.
    1. Make sure you are signing in with the same Adobe ID used for your subscription.
    2. Check your account info on Adobe's site to make sure the subscription is (still) active.

Maybe you are looking for

  • Prompting for the database logon while opening the report in CMC

    I created a report and saved in the Crystal server 2008 repository.  I set the  default Database configuration as report > Schedule > Database Logon > set password or tick "Use same database logon as when report is run" in Default Settings > Database

  • Verizon and it's lack of custoemr focus.

    I have had one of the most difficult and frankly worst customer experience with verizon I can recall in recent history. I have compliand several times about my verizon locking up and needing to rebooted at least 2 or 3 times a day. If the modem does

  • [SOLVED] linux: /boot/vmlinuz-linux exists in filesystem

    I have had this issue for a while now. I ignored it but now I'd like to be able to upgrade. Pacman throws this error: error: failed to commit transaction (conflicting files) linux: /boot/vmlinuz-linux exists in filesystem Errors occurred, no packages

  • Direct photo from camera to computer

    We need to shoot directly from our camera to our computer harddrive. one can do this with a movie in imovie. Any possibility for iphoto?

  • Fees for the call receiver

    Does the receiver of an international call to a mobile phone incur a local or internatioanal charge for receiving the call from a skype to go number? For example, if I call Portugal from Norway using my skype Norwegian skype to go number, does the ca