Problem when trying to edit an answer in thread

Hi,
in this thread:
Call BAPI_INCOMINGINVOICE_PARK park document local amount is always zero
although the answer is formatted and the preview is displayed correctly,
the formatting is not displayed in the real answer.
Could someone have a look at this?
Best regards.
Edited by: Pablo Casamayor on May 28, 2010 10:48 AM

We have already complained about the posting limits (i.e. wiki formatting is lost if message exceeds 2,500 characters) and I've also mentioned the difference between preview and actual posting (see Re: Suggestions for forum improvements). The latter is especially annoying, because even if you know about the limit, the preview won't necessarily show the right formatting for "borderline cases".
If you're interested in some further community suggestions on what could be changed, take a look at the complete thread. But be warned, it's quite lengthy...
I'm not quite sure why your answer lacks the formatting though. When I count the characters I get 2,407 (looking at HTML source) and I have only seen comments on loosing formatting when exceeding 2,500 characters. However, I know that for my "borderline postings" I sometimes check character count and even below 2,500 I seem to get into trouble.
Even though that sounds silly, I'm sometimes wondering if the 2,500 character limit refers to the final, expanded message (i.e. after translating the wiki formatting into proper html tags). But in the end I suspect only somebody with some application insight can explain this seemingly wacky behavior.

Similar Messages

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.

At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
When editing in Photoshop just add a box or mark on the image, for your tests.
- If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
- If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect.

After iPhoto update some photos go black when trying to edit them and am unable to edit those photos

After iPhoto update some photos go black when trying to edit them and am unable to edit those photos. How do I fix this as this is the latest update?

If I hold down the Option key while launching iPhoto, I get the option to start a new library. Do I have to import all my thousands of photos into the new library?
In his original post the poster referenced the following. As to the new Library, see the end.
There are several possible causes for the Black Screen issue
1. *Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. *Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. *A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. *A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. *A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
*If none of these help*:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD

Java error when trying to edit file - access denied

We have been running Vibe 3.0 for a couple years with no issues but suddenly users have begun to get java errors when trying to edit a file from Vibe. When a file entry is opened and the "Edit this file" link is clicked, a dialog pops up that says :
Error from command:
java.security.AccessControlException: access denied (java.io.FilePermission <<ALL FILES>> execute)
Has anyone else seen this? Could it be related to some windows security update perhaps? Any ideas how to resolve would be appreciated. This happens with regular users as well as admin.
Vibe is running on SLES 10 with mysql. We are using IIS Windows Authentication.
Thanks

dangross,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Error when trying to edit page

I get the following error when trying to edit an asp page
"The operation could not be performed because a problem
occurred while attempting to connect to the server. Please check
your internet connection and try again. For more details, please
visit the Incontext Editing Support Center."
If I try and duplicate the page I get:
"The page you are trying to edit or duplicate was loaded with
and error from the server.
Solution: Contact your web developer to correct the problem.
For more details, please visit the Incontext Editing Support
Center."

There is a test page here:
http://www.markthomasinfo.com/testice.asp.
I can't edit this file and get the errors I put in my first post in
this thread when I try and do so. I get the same errors with any
ASP file I try and edit.
I can however edit this simple html file successfully:
http://www.markthomasinfo.com/testincontext.html
The ASP page is very simple, here's the code:
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xmlns:ice="
http://ns.adobe.com/incontextediting">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=UTF-8" />
<title>Untitled Document</title>
<script src="includes/ice/ice.js"
type="text/javascript"></script>
</head>
<body>
<p>TEST ASP FILE</p>
<div ice:editable="*">Content for new Editable Region
goes here</div>
</body>
</html>

When trying to edit a photo, it disappears (black screen) or screen is full of lines. Is this a bug with the latest software update?

After updating with the latest software, when trying to edit a photo, it disappears (black screen) or screen is full of lines. If I blindly crop or edit the photo, when I exit edit mode, those changes have been made, but obviously this is unacceptable. Is this a bug with the latest software update?

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Elements 11 organizer has stopped working when trying to edit an album?

Has anyone run into this?
The only place I've had the problem is when trying to edit an album. After it stops working, elements 11 just shuts down.
Operating system is Windows 7 Ultimate.
Thanks...

Great.. you figured that out
Just a thought, if you want to continue using Roboform as well as PSE and the two conflict.. you can Add PSE to Roboform's blacklist. That should stop the interaction between the two.
Steps to do so-
If PSE is running, close it now.
In Roboform 7, go to Options / Applications Integration.
Select Add to the Black List (the list of applications RoboForm will not attach to).
Browse to the location of the PSE executable <Organizer in your case, possibly Editor too>
Thanks
Andaleeb

Problem when trying to place a post wrt BSP

Colleagues,
for a few days i am encountering problems when trying to place a post regarding BSP issue. I am not sure if this is just an IE settings problem or sth on the SDN forum side.
Another option is to check for customized corporate settings of the current project owner.
Any cool ideas are warmly welcomed.
Cheers, Harry
OK, this has been working fine. So what is the problem on the BSP forum? SAP buddies, please assist!
Many THX in advance!
Edited by: Harald Schwenger on May 8, 2008 10:50 AM
Edited by: Harald Schwenger on May 8, 2008 10:52 AM

Your launch services database, which stores information about which applications should open certain documents, may need to be repaired. Open the Terminal application found in /Applications/Utilities and paste in this command (all one line):
System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/La unchServices.framework/Versions/Current/Support/lsregister -kill -r -domain system -domain local -domain user
Hit the return key, log out and log in.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.7)

Black Screen When Trying to Edit Photos

I have the same problem as many others: When trying to Edit a photo, double clicking it creates a normal enlarged screen but this screen is all black. The problem has been raised by many for some time but no solutions have been identified. Should I be surprised that Apple has not yet addressed or even recognize the problem?

what does it mean to right con it?
Sorry - right "click" - fat fingers here
when i try to view photos on full screen, i now get a black screen with a white exclamation point. i view these pictures earlier this year with no problem. please help!
That indicates that iPhoto has lost the connection between the thumbnail and the full photo - if you have not been messing around inside the iPhoto library (you NEVER should do this) then backup and rebuild your library - depress the command and options keys and launch iPhoto - rebuild your library form the last automatic database backup - if that does not fix it use the other options - as a last resort use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - to rebuild your library
LN

IPhoto goes black when trying to edit photos - help!

iPhoto has suddenly decided to go black screen (where the image should be) dark when trying to edit photos. Permissions are fine (read & edit) so that's not the issue (has been offered on mac forums as a solution to this problem in the past). I am on a MacBook pro 2.53 Ghz Core 2 Duo, 4GB 1067 MHz DDR3, NVIDIA GeForce 9400M 256 MB, running OS X Lion 10.7.4 (11E53).
Any help is greatly appreciated in advance.
Thanks!

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

I got problem when trying to contact my iphone 4 using facetime,it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.

i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

I am having the problem when trying to take a panorama picture. It may only take the first frame or doesn't even start at all when I press the shutter button. even though when i hold the phone straight up and down, so that camera is at the top

I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?

To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back.

How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?

How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?

Hey tyjox,
Thanks for the question. After reviewing your post, it sounds like you need to deactivate Find My iPhone on a device that does not work. You will need to work with the family member of the account the iPhone is registered with. I would recommend that you use this article to help you resolve or isolate the issue.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
Remove an iOS device you no longer have
If you no longer have the iOS device because you gave it away or sold it, you need to remotely erase it before you can remove it.
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud).If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, then select the device.
Click Erase [device], then enter your Apple ID password. Because the device isn’t lost, don’t enter a phone number or message.If the device is offline, the remote erase begins the next time it’s online. You’ll receive an email when the device is erased.
When the device is erased, click Remove from Account.All your content is erased and someone else can now activate the device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can

I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.

Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About?

For some reason the "Basic" tab is missing in my Develop folder when trying to edit using LR5..? Plz Help

For some reason the "Basic" tab is missing in my Develop folder when trying to edit using LR5..? Plz Help

Right-click (Mac Cmd-click) on another panel header such as "Tone Curve". Make sure there is a checkmark for Basic as was all other panel sections that you want displayed.

Problem when trying to edit an answer in thread

Similar Messages

Maybe you are looking for