Problem when trying to run MD04

I am experiencing problems when trying to run my MD04 Collective access, for vendor say X & Y.
I buy many products from these vendors and I therefore need to have access to place these orders anytime of the day (as it can take more than one hour to raise the orders) and it is only allowing me access last thing in the day for some strange reason.
Please can you look into this - I'm not sure if there is a server issue due to the size of the job, but I must have the ability to undertake this task.
I tried to limit the selection further but still the problem is not getting solved.
please tell me what else can be done?
Thanks in advance.
Regards,
Sonal.

Basically when i am trying to do collective access thru MD04 I am putting plant and vendor.
the sys is not displaying the stock reqmt list but is getting time out.
I tried limiting further by putting delivery dates, MRP controller but still it is not working.
What else can be done?
Thanks & Regards,
Sonal

Similar Messages

Problem when trying to run in "Debug Mode" in JDeveloper9i

Hello All ,
i have a problem to debug my application using
JDeveloper9i .
i get an error: "fdebug.exe could not be read "
and Application error box appears .
i did the following steps in the instalation:
1) i installed the JDK 1.3
2) installed the Jdev9i from base installation zip
3) In <jdeveloper_root>\jdev\bin\ i executed the command
InstallOJVM.bat c:\jdk1.3
and get message:
"InstallOJVM successfully"
4) i wrote simple program and put a breakpoint ,
when i'm trying to run the program in "Debug mode" i get an error box message
"fdebug.exe Application Error"
The memory instruction could not be read
please help ,me to fix the problem i need the debuger option .
thanks in advance.

Do you have the file c:\jdk1.3\jre\bin\fdebug.exe, if you don't, you
need it. Look for the file in the base install directory, it should be
there and then copy it to the location above.
Michel

I've got TWO problems when trying to run iTunes

I've been trying to solve them separately, but each one of the answers requires for the other problem to be solved, and I am desperate. I've recently (one week ago) bought an iPad mini and I regret buying it, since I can't sync it to my computer. I don't even know what to do anymore, and its been TWO WEEKS of constantly trying.
The problem started when I tried updating iTunes as usual via the Apple updater. Somehow it gave me an error message, so I did as told by the program and downloaded it manually. After that, I got an R6034 error. Following a thread's advice, I uninstalled every Apple-related program in my computer, even did some cleaning-up, just in case. I reinstalled it, and when I thought I was done, an error popped up claiming that I don't have sufficient privileges to start system services, so Apple Mobile Device failed to start. I tried to fix this, but the R6034 error keeps popping up EVERY time I try to install or even RUN iTunes.
What should I do? All my music is in this computer, and I am even thinking about asking for a refund on my iPad and iPod. iTunes has never given me trouble and I've been using it for at least 5 years, but this problem is big enough to make me reconsider whether or not use it.

I reinstalled it, and when I thought I was done, an error popped up claiming that I don't have sufficient privileges to start system services, so Apple Mobile Device failed to start. I tried to fix this, but the R6034 error keeps popping up EVERY time I try to install or even RUN iTunes.
Doublechecking. Have you worked through the following user tip?
Troubleshooting issues with iTunes for Windows updates

I have problems installing cc all i get when trying to run is a quick flash of the opening screen (autumn trees)?

i have problems installing cc all i get when trying to run is a quick flash of the opening screen (autumn trees)?

If you have iPhoto 9 or later Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

App File Server connection error when trying to run a BI Publisher report..

hello Gurus...
As above - App File Server connection error when trying to run a BI Publisher report.. FOR THE FIRST TIME.
What does our DBA need to do..?
error message reads..
Template code: SUARXASR
Template app: AR
Language:      en
Territory:     GB
Output type:   EXCEL
[5/10/10 10:59:27 AM] [UNEXPECTED] [46321:RT1487572]
oracle.apps.fnd.cp.util.RemoteFileException: An error occurred while attempting to establish an Applications File Server connection with the node FNDFS_*****.ac.uk. There may be a network configuration problem, or the TNS listener on node FNDFS_*****.ac.uk may not be running. Please contact your system administrator.
at oracle.apps.fnd.cp.util.RemoteFile.readURL(RemoteFile.java:241)
at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:194)
at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:130)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:264)at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
[5/10/10 10:59:27 AM] [46321:RT1487572] Completed post-processing actions for request 1487572.I'm sure we never had to set anything up in our Test instance!??!!??
many thanks for looking..
Steven

nobody experienced this before..?

Error 500 Internal Server Error When trying to run an app

Greetings,
I'm trying to figure out how to fix this issue when I'm trying to run an app from JDeveloper 10.1.3.3.0.
This is my problem
1st of all it JD compiles everything great
http://img163.imageshack.us/img163/6589/compiling.jpg
2nd
The embedded server seems to works
http://img856.imageshack.us/img856/1231/runingserver.jpg
3rd
Everything crash!
http://img14.imageshack.us/img14/4301/internalse.jpg
JDeveloper doesn't shows any error. Same problem when trying to Debug
I'm using an oracle DB 10g which is in a different computer (in a server)... any guesses?
Thanks in advance!
-Fury

what URL you are trying to run ?
did you try to run on different computer ?
Jdev 10g is quite old now and i dont think it supports JSPX pages (i saw jspx extension in your deployment)
Zeeshan

Problems when trying to migrate from 6.0 to 6i

Hi,
I'm having problems when trying to migrate a Designer 6.0 application to 6i.
When I get to start the migration after having selected the source application, the process fails immediately after I've pressed the button.
I'm getting the error: CDR-21244: This process has been aborted and the advice to check the log file. But no log file is created.
I've read Note 234984.1 which gives two suggestions in this situation: That the ORACLE_HOME environment variable is unset, and that the LOG_DIRECTORY_RAU directory is writeable. Both is fulfilled in my situation. However it seems that the migration procedure tries to start imp - I've noticed a short flash with the command prompt screen - and when I try to start imp manually from the command prompt I get errors. I was able to fix this error by setting ORACLE_HOME and ORA_NLS33. But the defining ORACLE_HOME is "illegal" ref. Note 234984.1. Of course I tried to leave it anyway, but that didn't help neither: The migration still dies a quick and silent dead.
So now I'm stucked. How can I carry on?
The source is on version 6.0.3.5.0 running on 8.1.5, and the taget is version 6.5.92.1.9 running on 8.1.7.4.
Regards, Michael

The migration from Designer 6.0 to 6i requires careful planning. Please read the migration guide on OTN (http://www.oracle.com/technology/products/designer/index.html) for advice and to assist you with the migration.
Regards
Sue

When trying to run any page on jdev 9.0.3.5 the jdev close

when trying to run any page on jdev 9.0.3.5 the jdev close immidiatly and an empty log file is created i am using ie 8

Hi,
Check whether all the relevant services are up. If the problem still persist then there might be some issue with your JDeveloper.
Regards,
Gyan

Error when trying to run Advisor

Hi!
I get the following error when trying to run the Advisor (Application Builder > Application xxx > Utilities > Advisor) over our application:
Unknown type! View: APEX_APPLICATION_PAGE_PROC Column: CONDITION_EXPRESSION1 Value: WHEN_ANY_ITEM_IN_COMMA_DELIMITED_LIST_OF_PAGES_HAS_CHANGED
... this happens every time, even if I uncheck all boxes except one (e.g. "References with substitution syntax").
I'm wondering if there is something wrong with our Apex installation as I can't see any other references to this problem in the forum. We don't seem to be suffering any other problems so I expect it's something small...
Has anyone else ever encountered this and does anyone know of a solution? I would like to use the Advisor for some QA processes as it looks like a handy tool.
Many thanks in advance,
Alex.
Versions:
Apex 4.1.1.00.23
Oracle DB 10.2.0.2

Hi Alex,
very interesting. Looks like one of your processes uses the WHEN_ANY_ITEM_IN_COMMA_DELIMITED_LIST_OF_PAGES_HAS_CHANGED condition which has been deprecated for a very long time.
If you execute the following query in your workspace schema, you should find those processes which do use the condition. You might want to check if the reported pages/processes are still used in your application.
select application_id,
       application_name,
       page_id,
       page_name,
       process_name
from APEX_APPLICATION_PAGE_PROC
where CONDITION_EXPRESSION1 = 'WHEN_ANY_ITEM_IN_COMMA_DELIMITED_LIST_OF_PAGES_HAS_CHANGED';Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Error when trying to run an application that worked when built with 8.6

I have a simple program that I wrote in version 8.6 that I never had a problem building and running applications built with it in 8.6. Two weeks ago I got 2009 in the mail because we had very recently purchased 8.6 and I am getting errors when trying to run an application built with the same code using 2009. The error has to do with the Mean.vi. It claims it cannot find it. The error I get reads as follows:
An error occurred loading VI 'NI_AALBase.lvlib:Mean.vi'. LabVIEW load error code 3: Could not load front panel. I don't need access to this vi's front panel, so I am wondering if it is a problem with the runtime engine and not my code. Please respond as soon as possible as this will quickly start to impact my testing schedule. Thank You.
Solved!
Go to Solution.

Hi!
The same problem ???
I discussed it with my local NI technical support team. The application works without any problems now.
Basic rule: when creating an installer be sure that option "Run Time Engine xxxx" in "Additional Installers" category is checked in spite of the fact that Run Time Engine is already installed.
Best regards.
Attachments:
ADDINST.png ‏13 KB

Error when Trying to Run Concurrent Request on ASCP Instance

Hi Experts,
I have an issue when trying to run custom concurrent program in ASCP production.
The error message is:
oracle error 20001
ORA-20001: APP-FND-02901
You do not have access privilege to any operating unit. Please check if your profile option MO: Security Profile includes any operating unit or the profile option MO: Operating Unit is set has been detected in MO_GLOBAL.INIT
I have searched through metalink regarding this issue and the solution is I should define the "MO: Security Profile" and "MO: Operating Unit" profiles.
But the problem is my ASCP instance is not have any OU, it just defined for Inv Orgs. So, when I tried to define the profile, the LOV is empty.
FYI, in my ASCP dev instance is working fine. I can run my concurrent request into it.
In this instance, the profiles of "MO: Security Profile" and "MO: Operating Unit" are blank too.
From this node:
XLAACCPB - Create Accounting Program fails with Oracle error -20001: ORA-20001: APP-FND-02901: You do not have access privilege to any operating unit [ID 753824.1]
It provided 2 actions, and when I tried to run query in the 2nd action, the result is:
/* $Header: AFPFPROB.pls 120.18.12010000.10 2009/04/24 19:33:53 pdeluna ship $ */
Any help would be really appreciated.
Thanks & Regards,
Rheza

Hello Rheza,
We are also facing the same issue in Self Service HR, We also do not have any Operating Unit setup.
We are trying to run seeded "Active Users" concurrent program. Are you sure without setup of MO: Security Profile / MO: Operating Unit, It will work?
Regards,
Saurabh

Error message: 50103 (oxffff3c49) when trying to run VILogger

I get this error message: 50103 (oxffff3c49) when trying to run VI logger for data received from the NI USB 6008 DAQ. What does this mean and how do I fix it?

Go through all these threads and post back if that solves your problem or still you stuck up.
Mathan

When trying to run video from yahoo and youtube I get a "plugin clocked" message

When trying to run video from yahoo or youtube I get a "pluging blocked" message.

Hello,
After reading the information provided about your issue I suggest a soft reset of the phone.
#Take the back cover of the phone off.
#Take the battery out.
#Take the SIM card and microSD card out (if applicable).
#Wait 10 seconds.
#Put the SIM card and microSD card back in (if applicable).
#Put the battery back in.
#Put the back cover back on.
#Turn the device on.
#Check if the issue you were having is still present.
Please report back to us if this solved your problem!
Thank you

When trying to run CS5 (64 bit) on Windows 7 get error failed to initlialize COOLTYPE ?

Hello,
When trying to run CS5 (64 bit) on Windows 7 get error failed to initlialize COOLTYPE ?
Any ideas ?
I tried re-installing CS5 Master collection but that failed as well.
Running out of ideas
Richard

I have the same problem, and while I can 'fix' it with the approach described here, I have to 'fix' it that way EVERY TIME I launch itunes. I suppose the lousy support for mainstream computers is apple's way of saying, 'well of course you can't use your phone, you're not living in a (TM) apple home (TM) please sell your existing home and purchase one from apple if you want your phone to work.' I never would have imagined that as a computer programmer it would be a multi-hour/failed installation process to get iTunes and the iPhone4 working properly. What a joke.

Exception when trying to run an Web Application that uses a Web service

Hello All,
I get an exception when trying to run an Web Application that uses a Web service. The web application is a WebDynpro Application.(an application similar to the one "Using an Email Web Service in Web Dynpro" in the tutorial section of Web Dynpro but using a different web service)
The exception is
<b>Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found.</b>
Could anyone give me an idea on what might be the problem ?
Regards,
Loveline.

Hello,
Like you said it was the problem with url.
The webservice I used is actually running on the local machine (where the NetWeaver developer studio is installed); so in the url I had specified localhost. But I deployed the application on another server(SAP J2EE Engine). That is why it didn't work. On changing the url as required, the application is working fine.
Thanks !
Regards,
Loveline.

Problem when trying to run MD04

Similar Messages

Maybe you are looking for