Problem when trying to start Weblogic server
Hi,
I have a problem when in was trying to start the weblogic server from the
Weblogic Console.It Loads all the necessary files and finally it comes out
giving an error "Server start message not received in allotted time, server
process killed.".
But at the same time i can start the server cooly by running the
"Wlserver.exe".Can any help me on this problem
regards
Ramesh
Baan Company
Hi!
I'm quite sure that this is a time out problem. I need about 3 minutes to start
up my weblogic server. It's no problem to start it from a command prompt
(startWeblogic.cmd), but using weblogic console application I always got a time
out after 120 seconds. On a faster computer, where the start up process can be
finished in less then 120 seconds it was no problem to start the server with the
same amount of EJBs.
Does anyone know how to increase the time out parameter for the weblogic console
application?
Best reagards,
Przemek
Ramesh wrote:
Yes Its resource problem i suppose..
My friend who is working with WL advised me to us 128 MB RAM to work with
Weblogic server.
Justin i need one more help
I registered my servlet in Weblogic.properties.But when i try to load
it from the command tab says "Property change error on LOAD".I dont know
what
properties i have to change to load this.
Even the existing example servlets i coundnt Load.!!!!
Can any one help on this problem
Justin Knowlden <[email protected]> wrote in message
news:[email protected]...
I actually got WL to work on my system yesterday. I found that it was aresource
problem. I had to shut down my X Server; if you don't know what the XServer is,
it's (basically) the app that runs a window manager. It was consuming toomuch
of my processing time. WL is now the only thing running on that machine.
Since you have NT, You may want to try shutting down all uneccesarydevices and
app's.
Ramesh wrote:
My System is
Win NT 4.00
Pentium pro 199 mhz
and 80 mb RAM
Is that because of the Memory Problem?
I dont know because i am able run it well when it trought command
prompt.
Justin Knowlden <[email protected]> wrote in message
news:[email protected]...
I posted a comment about this last week and have to receive a reply. Ialso saw
a post from April about this and there were no replies to it, either.
My problem exists on Linux whether I use the console or not. What are
the
specs
for your machine?
Mine:
Linux 2.2.15
P/Pro 199 MHx
128 MB RAM
Ramesh wrote:
Hi,
I have a problem when in was trying to start the weblogic server
from
the
Weblogic Console.It Loads all the necessary files and finally it
comes
out
giving an error "Server start message not received in allotted time,server
process killed.".
But at the same time i can start the server cooly by running the
"Wlserver.exe".Can any help me on this problem
regards
Ramesh
Baan Company--
Justin Knowlden <[email protected]>
Software Developer
MyPoints.com, Inc.
Justin Knowlden <[email protected]>
Software Developer
MyPoints.com, Inc.
Przemyslaw Rychlewski Tech@Spree Software Technology GmbH
mailto:[email protected] http://www.tech.spree.de
Tel +49 (0)30 235 520-34 Bülowstrasse 66
Fax +49 (0)30 217 520-12 10783 Berlin
Similar Messages
-
Auroraservice error when trying to start http Server (9iAS)
Hi
my problem is that when trying to start oracle http server I get the error message:
syntax error on line 14 of mod__ose.conf
AuroraService-directive already in effect for this sever
what does it mean and what can I do?
thanks in advanceThanks, I now see the ASP.NET 20 version. I am now getting the following error.
Server Error in '/OSoft' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) +264
System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) +877
OSoft.Services.Platform.Logging.Logger.logError(Object source, String user, String err) +0
OSoft.Consumers.ZFP.WebBase.PageBase.logException(Exception ex) +312
OSoft.Consumers.ZFP.WebBase.PageBase.WriteException(Exception ex) +24
OSoft.Consumers.ZFP.WebBase.PageBase.page_load(Object sender, EventArgs e) +2313
System.EventHandler.Invoke(Object sender, EventArgs e) +0
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +750
Version Information: Microsoft .NET Framework Version:1.1.4322.2407; ASP.NET Version:1.1.4322.2407 -
Error when trying to start managed server from node manager
I have a managed server which is authenticated through a WeblogicAuthenticProvider. When starting the managed server from command line I need to setup certain jars in the classpath in order to start it successfully. However when I try and start the managed server from a node manager, I receive the following error.
Any ideas as to what is going on are appreciated. Is there any way to force Weblogic Node manager to invoke the actual startManagedWeblogic.cmd when bringing up the managed server
Thanks
<Jun 5, 2006 9:21:05 AM EDT> <Info> <NodeManager@*.*:5555> <Starting Server TweCluster::TaxwareServer1 ...>
<Jun 5, 2006 9:21:07 AM EDT> <Info> <NodeManager@*.*:5555> <Server TweCluster::TaxwareServer1 started, process id = 3,012>
<Jun 5, 2006 9:21:11 AM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA WebLogic JRockit(TM) 1.4.2_05 JVM R24.4.0-1 Version ari-38120-20041118-1131-win-ia32 from BEA Systems, Inc.>
<Jun 5, 2006 9:21:12 AM EDT> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at http://zeus3dev:7001 to check if there exists a running admin server at this URL.>
<Jun 5, 2006 9:21:12 AM EDT> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
<Jun 5, 2006 9:21:12 AM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647 >
<Jun 5, 2006 9:21:12 AM EDT> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server http://zeus3dev:7001 to retrieve the initial configuration.>
<Jun 5, 2006 9:21:16 AM EDT> <Notice> <Log Management> <BEA-170019> <The server log file E:\bea8.1\weblogic81\common\nodemanager\TaxwareServer1\TaxwareServer1.log is opened. All server side log events will be written to this file.>
The WebLogic Server did not start up properly.
java.lang.NoClassDefFoundError: com/taxware/twe/util/crypto/CryptoUtil
at com.taxware.twe.auth.server.GenericPrincipalValidator.<init>()V(GenericPrincipalValidator.java:41)
at com.taxware.twe.auth.server.WeblogicPrincipalValidator.<init>()V(WeblogicPrincipalValidator.java:38)
at com.taxware.twe.auth.server.WeblogicAuthenticationProvider.getPrincipalValidator()Lweblogic.security.spi.PrincipalValidator;(WeblogicAuthenticationProvider.java:188)
at weblogic.security.service.PrincipalAuthenticator.initialize(Ljava.lang.String;[Lweblogic.management.security.ProviderMBean;)V(PrincipalAuthenticator.java:154)
at weblogic.security.service.PrincipalAuthenticator.<init>(Ljava.lang.String;[Lweblogic.management.security.ProviderMBean;)V(PrincipalAuthenticator.java:262)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(Ljava.lang.String;Lweblogic.management.security.RealmMBean;)Lweblogic.security.service.PrincipalAuthenticator;(SecurityServiceManagerDelegateImpl.java:581)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(Lweblogic.management.security.RealmMBean;Ljava.util.HashMap;)V(SecurityServiceManagerDelegateImpl.java:420)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(Ljava.lang.String;)V(SecurityServiceManagerDelegateImpl.java:700)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms()V(SecurityServiceManagerDelegateImpl.java:733)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(Lweblogic.security.acl.internal.AuthenticatedSubject;)V(SecurityServiceManagerDelegateImpl.java:876)
at weblogic.security.service.SecurityServiceManager.initialize(Lweblogic.security.acl.internal.AuthenticatedSubject;)V(SecurityServiceManager.java:734)
at weblogic.t3.srvr.T3Srvr.initializeHere()V(T3Srvr.java:822)
at weblogic.t3.srvr.T3Srvr.initialize()V(T3Srvr.java:670)
at weblogic.t3.srvr.T3Srvr.run([Ljava.lang.String;)I(T3Srvr.java:344)
at weblogic.Server.main([Ljava.lang.String;)V(Server.java:32)
Reason: com/taxware/twe/util/crypto/CryptoUtilFound a workaround:
Manually, add PATH (and probably the other environment variables also) to
${WLS_HOME}/common/bin/commEnv.sh. -
Exception while trying to start weblogic server using workshop
Hi all,
Here am getting the trace given below when i try to start workshop.Any
clues.
=====================================
Starting WebLogic Server...
<Feb 2, 2002 4:09:18 PM EST> <Notice> <Management> <140005> <Loading
configuration .\..\workshop\config.xml>
<Feb 2, 2002 4:09:41 PM EST> <Notice> <WebLogicServer> <000327> <Starting
WebLogic Admin Server "cgServer" for domain
"workshop">
<Feb 2, 2002 4:10:15 PM EST> <Alert> <JMS> <040052> <JMSServer
"cgJMSServer", store failed to open, java.io.IOExcepti
on: JMS JDBC store, connection pool = <cgPool>, prefix = <null>: JMS JDBC
SQL Error
java.sql.SQLException: Invalid transaction state -- active SQL-transaction.
state: 2.
at
com.pointbase.net.netJDBCPrimitives.handleResponse([DashO-OE-V2.2-121500.112
15B000919])
at
com.pointbase.net.netJDBCPrimitives.handleJDBCObjectResponse([DashO-OE-V2.2-
121500.11215B000919])
at
com.pointbase.net.netJDBCDatabaseMetaData.getTables([DashO-OE-V2.2-121500.11
215B000919])
at
weblogic.jdbc.pool.DatabaseMetaData.getTables(DatabaseMetaData.java:1006)
at
weblogic.jms.store.JDBCStoreUpgradeHelper.tablesExist(JDBCStoreUpgradeHelper
.java:1076)
at
weblogic.jms.store.JDBCStoreUpgradeHelper.oldStore(JDBCStoreUpgradeHelper.ja
va:1261)
at weblogic.jms.store.JDBCIOStream.recover(JDBCIOStream.java:840)
at weblogic.jms.store.JMSStore.recover(JMSStore.java:121)
at weblogic.jms.backend.BEStore.open(BEStore.java:234)
at weblogic.jms.backend.BEStore.start(BEStore.java:147)
Thanks
VPls post it to the workshop newsgroup:
weblogic.developer.interest.70beta.workshop
regards,
-manoj
"Veena" <[email protected]> wrote in message news:[email protected]..
Hi all,
Here am getting the trace given below when i try to start workshop.Any
clues.
=====================================
Starting WebLogic Server...
<Feb 2, 2002 4:09:18 PM EST> <Notice> <Management> <140005> <Loading
configuration .\..\workshop\config.xml>
<Feb 2, 2002 4:09:41 PM EST> <Notice> <WebLogicServer> <000327> <Starting
WebLogic Admin Server "cgServer" for domain
"workshop">
<Feb 2, 2002 4:10:15 PM EST> <Alert> <JMS> <040052> <JMSServer
"cgJMSServer", store failed to open, java.io.IOExcepti
on: JMS JDBC store, connection pool = <cgPool>, prefix = <null>: JMS JDBC
SQL Error
java.sql.SQLException: Invalid transaction state -- active SQL-transaction.
state: 2.
at
com.pointbase.net.netJDBCPrimitives.handleResponse([DashO-OE-V2.2-121500.112
15B000919])
at
com.pointbase.net.netJDBCPrimitives.handleJDBCObjectResponse([DashO-OE-V2.2-
121500.11215B000919])
at
com.pointbase.net.netJDBCDatabaseMetaData.getTables([DashO-OE-V2.2-121500.11
215B000919])
at
weblogic.jdbc.pool.DatabaseMetaData.getTables(DatabaseMetaData.java:1006)
at
weblogic.jms.store.JDBCStoreUpgradeHelper.tablesExist(JDBCStoreUpgradeHelper
.java:1076)
at
weblogic.jms.store.JDBCStoreUpgradeHelper.oldStore(JDBCStoreUpgradeHelper.ja
va:1261)
at weblogic.jms.store.JDBCIOStream.recover(JDBCIOStream.java:840)
at weblogic.jms.store.JMSStore.recover(JMSStore.java:121)
at weblogic.jms.backend.BEStore.open(BEStore.java:234)
at weblogic.jms.backend.BEStore.start(BEStore.java:147)
Thanks
V
[att1.html] -
Facing problem when trying to start the addon manually
Hi,
I have created an add-on using simple addon installer project. The prepared addon has been installed successfully. After installation, when trying to start the addon manually by Add-On Manager,
The addon exe is giving an error message at the line when try to instantiate the SboGuiApi.
"SAPbouiCOM.SboGuiApi SboGuiApi = new SAPbouiCOM.SboGuiApi();"
The error message is -
"Could not load file or assembly 'Interop.SAPbouiCOM, Version=6.8.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified."
and finally it gives an error message "Add-On connection timed out".
Note: At the development end we have tested it on our two systems its working properly. But on the production system its giving the error
Please help!! its urgent...
Regards,
AshokHi suresh,
I have tried it number of times, but the problem not been addressed yet.
Or can you please clearify what exactly do you mean by UIAPI.
What we have did at our end is -
Just removed the SAPbouiCOM.dll from the references and add it again.
"I am using SBO 2005A SP01 PL-31"
If you have any more ideas please reply back
Thanks for prompt response
Regards,
Ashok -
Java.lang.NoClassDefFoundError when trying to start Weblogic service
Hi,
I'm using Weblogic 10.3.2 and have installed a service to start weblogic automatically. However, when I start the service I receive the NoClassDefFound. The error is below:
[Wed Feb 03 16:03:04 2010] [RunJavaApp] Loading class - C:\PROGRA~1\Java\JDK16~1.0_1\jre\bin\server\jvm.dll
java.lang.NoClassDefFoundError: C:\PROGRA~1\Java\JDK16~1/0_1\jre\bin\server\jvm/dll
Caused by: java.lang.ClassNotFoundException: C:\PROGRA~1\Java\JDK16~1.0_1\jre\bin\server\jvm.dll
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)Hi,
I've gotten past this error, but I still can't start my Weblogic service. From what I can tell, there is something wrong with the PATH. I've set the path within the InstallSvc.cmd file, however, after it's installed, I checked the registry entry for the service, went to the path defined and tried to run java.exe.
It does not work as there is no java.exe in the specified path. In the registry, the 'Path' parameter is set to 'D:\product\Oracle\11.1.1\Middleware\wlserver_10.3\server\bin' which is my weblogic home directory. Obviously, there is no java.exe in this directory, so this is normal behaviour. However, I would expect the 'Path' to be set as:
Path=D:\product\Oracle\111~1.1\MIDDLE~1\patch_wls1032\profiles\default\native;D:\product\Oracle\111~1.1\MIDDLE~1\WLSERV~1.3\server\native\win\x64;D:\product\Ora
cle\111~1.1\MIDDLE~1\WLSERV~1.3\server\bin;D:\product\Oracle\111~1.1\MIDDLE~1\modules\ORGAPA~1.0\bin;C:\PROGRA~1\Java\JDK16~1.0_1\jre\bin;C:\PROGRA~1\Java\JDK16
~1.0_1\bin;D:\product\Oracle\11.1.1\client\OraClient11g_home1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\product\Oracle\111~1.1\MIDDLE~1\WLS
ERV~1.3\server\native\win\x64\oci920_8
Above is what I set in the installSvc.cmd file. Maybe the 'Path' in the registry for the service has a different purpose than the 'PATH' parameter I specify above.
Please note the Java home directory is specified in "8dot3" format. I am using version 1.6.0_18.
Any help would be appreciated.
Thank you. -
Error when trying to start EJB Server
Hi,
I am new to EJB's and am following the tutorial on ejbtut.com. I followed the tutorial and created the EmployeesEJB.jar file and placed the appropriate code in the ejb.ini file to deploy it. But when i start the EJB server i get the following. Can anyone please help me tackle this problem.
Heres what happens when i start the server:::::::::::
file: C:\Blazix\Ejblog.log
Blazix EJB Server 1.2
Copyright (C) Desiderata Software, 2001-2002
All rights reserved
Configuration file: C:\Blazix\ejb.ini
JRMP version
Deploying EJB-Home class "employees.EmployeesHome" at JNDI name "Employees"
Evaluation license
java.rmi.ServerException: Server RemoteException; nested exception is:
java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
java.lang.ClassNotFoundException: desisoft.ejb.server.EjbServerJRMP_Stub
java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
java.lang.ClassNotFoundException: desisoft.ejb.server.EjbServerJRMP_Stub
java.lang.ClassNotFoundException: desisoft.ejb.server.EjbServerJRMP_Stub
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
at sun.rmi.server.UnicastRef.invoke(Unknown Source)
at sun.rmi.registry.RegistryImpl_Stub.rebind(Unknown Source)
at java.rmi.Naming.rebind(Unknown Source)
at desisoft.ejb.server.EjbServerJRMP.serverMain(EjbServerJRMP.java:329)
at desisoft.ejb.server.EjbServer.main(EjbServer.java:803)
Looking at the error it seems as if its looking for the EJBServer's stub file. The tutorial didn't mention abt creating any kind of stub file, so can someone please tell me what am missing here.
Thanks in advanceGenerate the stubs and skeletons for your EJB.This you can do by generating deployment code in most of the IDEs.
Hope this helps you. -
Security exception when trying to start Managed Server
Hi all,
First I configured a Adminisistration server and started it. After that I added
a another server as ManagedServer.These two points to the same Weblogic server.
When I try to start Managed server by running the script, it gave me following
error.
<Jun 25, 2001 5:25:11 PM GMT+06:00> <Emergency> <Server> <Unable to initialize
the server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError: java.security.acl.NotOwnerException
java.lang.IllegalAccessError: java.security.acl.NotOwnerException
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:36)
at weblogic.security.acl.Realm.authenticate(Realm.java:183)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at weblogic.security.acl.internal.Security.authenticate(Security.java:116)
at weblogic.jndi.WLInitialContextFactoryDelegate.pushUser(WLInitialContextFactoryDelegate.java:444)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:287)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:259)
at weblogic.jndi.Environment.getContext(Environment.java:135)
at weblogic.jndi.Environment.getInitialContext(Environment.java:118)
at weblogic.management.Admin.initializeRemoteAdminHome(Admin.java:891)
at weblogic.management.Admin.start(Admin.java:305)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:331)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
I suspect reason for this might be weblogic.policy file. There you need to edit
some lines replacing the location of the directory in which you installed WebLogic
Server. I did this but still error occurs.
Do u have any idea why above error occurs and if it is due to the weblogic.policy
file entry please tell me how it correctly done.
I am using WL60(sp2)in Win NT,
My installed dir: E:\bea\wlserver6.0\
Thanks
NalikaI don't believe that you can use the same server definitions for both an admin server and a managed server. So, you'll need to create a second server that is your managed server with a different name or
just run with the admin server.
Paul
On 25 Jun 2001 04:43:22 -0800, "Nalika" <[email protected]> wrote:
>
Hi all,
First I configured a Adminisistration server and started it. After that I added
a another server as ManagedServer.These two points to the same Weblogic server.
When I try to start Managed server by running the script, it gave me following
error.
<Jun 25, 2001 5:25:11 PM GMT+06:00> <Emergency> <Server> <Unable to initialize
the server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError: java.security.acl.NotOwnerException
java.lang.IllegalAccessError: java.security.acl.NotOwnerException
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:36)
at weblogic.security.acl.Realm.authenticate(Realm.java:183)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at weblogic.security.acl.internal.Security.authenticate(Security.java:116)
at weblogic.jndi.WLInitialContextFactoryDelegate.pushUser(WLInitialContextFactoryDelegate.java:444)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:287)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:259)
at weblogic.jndi.Environment.getContext(Environment.java:135)
at weblogic.jndi.Environment.getInitialContext(Environment.java:118)
at weblogic.management.Admin.initializeRemoteAdminHome(Admin.java:891)
at weblogic.management.Admin.start(Admin.java:305)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:331)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
I suspect reason for this might be weblogic.policy file. There you need to edit
some lines replacing the location of the directory in which you installed WebLogic
Server. I did this but still error occurs.
Do u have any idea why above error occurs and if it is due to the weblogic.policy
file entry please tell me how it correctly done.
I am using WL60(sp2)in Win NT,
My installed dir: E:\bea\wlserver6.0\
Thanks
Nalika -
[Solved] Font problem when trying to start qmon (sun grid engine)
When I tried to start the qmon (queue monitor program), the error message show up as below:
[root@sge01 ~]# qmon
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--14-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-bold-r-*--14-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--20-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--12-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--24-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-courier-medium-r-*--14-*-*-*-m-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-courier-bold-r-*--14-*-*-*-m-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-courier-medium-r-*--12-*-*-*-m-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--10-*-*-*-p-*-*-*" to type FontStruct
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 45 (X_OpenFont)
Serial number of failed request: 514
Current serial number in output stream: 525
[root@sge01 ~]#
I have all the fonts from the official depository installed (verified by the command # pacman -Ssq font ). I use LXDE and the system has been updated.
Is there anything I can do to run this program?
Last edited by teetee1 (2013-08-28 04:24:40)Thanks for the link. I was able to solve the font errors quickly, which is great!
Unfortunately some other errors remain:
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 45 (X_OpenFont)
Serial number of failed request: 478
Current serial number in output stream: 489
I've tried to follow instructions from the links below:
http://ubuntuforums.org/showthread.php?t=1778584
http://www.edaboard.com/thread139363.html
But realized I already have the xorg- 100dpi and 75dpi fonts by checking with the pacman command: pacman -Ssq 100dpi (and 75dpi).
Any help is greatly appreciated. -
Problem when trying to start BEx Analyzer (7.0)
Hello - We have completed an upgrade of a sandbox to NetWeaver BI 7.0 (from BW 3.5) and we are getting ready to have users start to test to find functionality issues. When I start Business Explorer (7.0), it opens Excel (2003) with no problem and the menu appears and the icons appear to be active. However, when I mouse over any of the menu items, the text is in German, and if I click on any of them nothing happens. I have run the sapbexc710.xla spreadsheet and it comes up with some yellows (version on PC is higher than expected), but no reds.
Is there a known solution to this? This is the first time we have tried to run the 7.0 version of BEx Analyzer, but we have been using the 3.5 version for a couple of years.
Any assistance is greatly appreciated!
Regards,
Blair ToweHi,
You need to install this support package.....bi710sp05_500-10004472
Regards
Prasad Nannuri -
Nokia 3110c problem when trying to start
Hello. I have a problem. I can't start my phone....more detailed, when I start it up, the screen remains white and the only thing that appears is the battery sign and after 3-4 white/black screens the phone stops. If i try again to start it, same thing happens. I heard that the memory card could be a problem but, even if I remove the card the problem remains.
Is there any solution to this?
Thanks.Try flashing your phone. Sometimes a slightly corrupt firmware might compromise the performance of the phone as a whole. But there is also a possibility that it's a hardware problem.
And you could only do that by means of sending your phone to the Nokia Care Centre near you.
Kind regards -
Error when trying to start oc4j server from jdev10g
Any ideas?
05/07/01 09:50:56 Exception in thread "OC4J Launcher" oracle.oc4j.loader.util.An
notatedNoClassDefFoundError:
Missing class: com.sun.corba.se.internal.iiop.CDRInputStream
Dependent class: com.evermind.server.ApplicationContext
Loader: oc4j:10.1.3
Code-Source: /D:/JDeveloper_1013/j2ee/home/lib/oc4j-internal.jar
Configuration: <code-source> in boot.xml in D:\JDeveloper_1013\j2ee\ho
me\oc4j.jar
The missing class is not available from any code-source or loader in the server.
05/07/01 09:50:56 at oracle.oc4j.loader.PolicyClassLoader.handleClassNotFo
und (PolicyClassLoader.java:1956) [/D:/JDeveloper_1013/j2ee/home/oc4j.jar (from
system property java.class.path), by sun.misc.Launcher$AppClassLoader@20120943]
at oracle.oc4j.loader.PolicyClassLoader.internalLoadClass (PolicyClassLo
ader.java:1641) [/D:/JDeveloper_1013/j2ee/home/oc4j.jar (from system property ja
va.class.path), by sun.misc.Launcher$AppClassLoader@20120943]
at oracle.oc4j.loader.PolicyClassLoader.loadClass (PolicyClassLoader.jav
a:1591) [/D:/JDeveloper_1013/j2ee/home/oc4j.jar (from system property java.class
.path), by sun.misc.Launcher$AppClassLoader@20120943]
at oracle.oc4j.loader.PolicyClassLoader.loadClass (PolicyClassLoader.jav
a:1577) [/D:/JDeveloper_1013/j2ee/home/oc4j.jar (from system property java.class
.path), by sun.misc.Launcher$AppClassLoader@20120943]
at java.lang.ClassLoader.loadClassInternal (Unknown source file) [jre bo
otstrap, by jre bootstrap]
at com.evermind.server.ApplicationContext.<clinit> (ApplicationContext.j
ava:62) [/D:/JDeveloper_1013/j2ee/home/lib/oc4j-internal.jar (from <code-source>
in boot.xml in D:\JDeveloper_1013\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.Application.<init> (Application.java:173) [/D:/JD
eveloper_1013/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in
D:\JDeveloper_1013\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServer.initializeApplications (Applica
tionServer.java:1403) [/D:/JDeveloper_1013/j2ee/home/lib/oc4j-internal.jar (from
<code-source> in boot.xml in D:\JDeveloper_1013\j2ee\home\oc4j.jar), by oc4j:1
0.1.3]
at com.evermind.server.ApplicationServer.setConfig (ApplicationServer.ja
va:944) [/D:/JDeveloper_1013/j2ee/home/lib/oc4j-internal.jar (from <code-source>
in boot.xml in D:\JDeveloper_1013\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServerLauncher.run (ApplicationServerL
auncher.java:87) [/D:/JDeveloper_1013/j2ee/home/lib/oc4j-internal.jar (from <cod
e-source> in boot.xml in D:\JDeveloper_1013\j2ee\home\oc4j.jar), by oc4j:10.1.3
at java.lang.Thread.run (Unknown source file) [jre bootstrap, by jre bo
otstrap]Do you mean July or Dec for 10.1 DP4, remembering that seasons are reversed on opposite sides of the planet, and I'm in Sydney :-)
Are you able to give a closer estimate for 10gAS production that supports J2EE 1.4 / JSP 2.0 / Java 5.0?
We're currently planning the next phase of our project, and one risk is that a JSP 2.0 / Java 5.0 / J2EE 1.4 container won't be available when we want to begin the testing phase, or worse, when we want to go live.
We want to be well into testing by Jan next year.
If we can't get a firm estimate then we'd have to use jdk1.4 + jsp1.2 which we don't want to do.
Thanks,
Greg -
Wrong ELF class: ELFCLASS64 when trying to start HTTP Server
Oracle11gR1 Database on OEL 5 64bit with Oracle10gR3 (10.1.3.3.0) Application Server
I have finished installing Oracle Application Server and in the end it fails to bring up HTTP Server. I checked the logs and saw the following:
/opt/app/oracle/product/11.1.0/http_1/ohs/bin/apachectl startssl: execing httpd
/opt/app/oracle/product/11.1.0/http_1/ohs/bin/httpd: error while loading shared libraries: libgdbm.so.2: wrong ELF class: ELFCLASS64
I am thinking that it could be a 32bit vs. 64bit libraries. I have tried to create some links but still no luck. Below are the current links that I have in the /usr/lib and /usr/lib64 directories.
1. /usr/lib
# ls -al libgdbm*
lrwxrwxrwx 1 root root 16 Sep 3 09:47 libgdbm.so.2 -> libgdbm.so.2.0.0
-rwxr-xr-x 1 root root 26792 Sep 3 09:41 libgdbm.so.2.0.0
2. /usr/lib64
# ls -al libgdbm*
lrwxrwxrwx 1 root root 16 Sep 3 10:17 libgdbm.so -> libgdbm.so.2.0.0
lrwxrwxrwx 1 root root 16 Jul 18 04:34 libgdbm.so.2 -> libgdbm.so.2.0.0
-rwxr-xr-x 1 root root 26792 Jun 5 2007 libgdbm.so.2.0.0
lrwxrwxrwx 1 root root 23 Sep 3 10:19 libgdbm.so.3 -> /usr/lib64/libgdbm.so.2
Thank you.My OEL 5 also had the gdbm package installed, but only the 64bit version.
I've installed the i386 version also and now it works.
To check to which dynamic libraries a binary will use you issue the command ldd <binary>
Then you could check to which he will be linked.
Be aware that library resolving could be influenced by environment variables which will sometime also be set(overwritten) by the calling script.
ldd /u01/app/oracle/product/admin/web10g/ohs/bin/httpd
linux-gate.so.1 => (0xffffe000)
libaprutil-0.so.0 => not found
libgdbm.so.2 => /usr/lib/libgdbm.so.2 (0xf7f04000)
libdb-3.3.so => /lib/libdb-3.3.so (0xf7e0d000)
libexpat.so.0 => /lib/libexpat.so.0 (0x00b64000)
libapr-0.so.0 => not found
libpthread.so.0 => /lib/libpthread.so.0 (0x00707000)
librt.so.1 => /lib/librt.so.1 (0x007ef000)
libm.so.6 => /lib/libm.so.6 (0x00726000)
libcrypt.so.1 => /lib/libcrypt.so.1 (0xf7dda000)
libnsl.so.1 => /lib/libnsl.so.1 (0xf7dc3000)
libdl.so.2 => /lib/libdl.so.2 (0x00720000)
libc.so.6 => /lib/libc.so.6 (0x005c1000)
/lib/ld-linux.so.2 (0x005a3000)
Two libraries still not found but they are resolved by a env. variable setting by opmn.
To get to your issue, check if the httpd is resolving to the correct ( the 32bit ) libraries.
Hope this helps. -
Problems when trying to install Oracle9i server in RH9
I get the following message when I try to install the soft.
I have the environment variables already set, the users, groups,etc.
[oracle@seth cdrom]$ Initializing Java Virtual Machine from >/tmp/OraInstall0/jre/bin/jre. Please wait...
/tmp/OraInstall0/jre/bin/../lib/i686/green_threads/libzip.so: >symbol errno, version GLIBC_2.0 not defined in file >libc.so.6 with link time reference (libzip.so)Unable to >initialize threads: cannot find class java/lang/Thread
Could not create Java VMplease send me an e-mail
[email protected]this is going to help a lot. Check the pre-requisites regarding libraries and paths.
http://linux.oreillynet.com/pub/a/linux/2003/09/04/oracle_install.html
Joel P�rez -
Error starting WebLogic Server from Workshop
I get the following error when trying to start WebLogic server
from within Workshop. Any ideas? Also, it looks like the sample
code that came with the first beta is no longer there - is that
supposed to be the case?
Build # 2002.0423.3
Values from Workshop.properties:
#Thu Jun 13 14:34:08 MDT 2002
paths.domain=workshop
paths.serverRoot=localhost
paths.startCmd=startWebLogic
defaultJndiDataSource=cgSampleDataSource
paths.browser=C\:\\Program Files\\Internet Explorer\\IExplore.exe
paths.httpRoot=http\://localhost\:7001
paths.rootDirectory=C\:\\bea7.0beta2\\weblogic700\\samples
paths.stopCmd=stopWebLogic
recent.lastProject=C\:\\bea7.0beta2\\weblogic700\\samples\\workshop\\applications\\samples
paths.classPath=C\:\\bea7.0beta2\\jdk131_02\\jre\\lib\\rt.jar;C\:\\bea7.0beta2\\weblogic700\\workshop\\stdlib.jar;C\:\\bea7.0beta2\\weblogic700\\server\\lib\\weblogic.jar
recent.lastFiles=C\:\\bea7.0beta2\\weblogic700\\samples\\workshop\\applications\\samples\\HelloWorld.jws
controls.applicationView.enabled=0
paths.port=7001I get the following error when trying to start WebLogic server
from within Workshop. Any ideas? Also, it looks like the sample
code that came with the first beta is no longer there - is that
supposed to be the case?
Build # 2002.0423.3
Values from Workshop.properties:
#Thu Jun 13 14:34:08 MDT 2002
paths.domain=workshop
paths.serverRoot=localhost
paths.startCmd=startWebLogic
defaultJndiDataSource=cgSampleDataSource
paths.browser=C\:\\Program Files\\Internet Explorer\\IExplore.exe
paths.httpRoot=http\://localhost\:7001
paths.rootDirectory=C\:\\bea7.0beta2\\weblogic700\\samples
paths.stopCmd=stopWebLogic
recent.lastProject=C\:\\bea7.0beta2\\weblogic700\\samples\\workshop\\applications\\samples
paths.classPath=C\:\\bea7.0beta2\\jdk131_02\\jre\\lib\\rt.jar;C\:\\bea7.0beta2\\weblogic700\\workshop\\stdlib.jar;C\:\\bea7.0beta2\\weblogic700\\server\\lib\\weblogic.jar
recent.lastFiles=C\:\\bea7.0beta2\\weblogic700\\samples\\workshop\\applications\\samples\\HelloWorld.jws
controls.applicationView.enabled=0
paths.port=7001
Maybe you are looking for
-
How do I keep an application window hidden when not accessed?
I have an application running constantly to control my FW audio interface outputs etc. I use system events applescripts to control it's UI with a USB controller (PowerMate) - and that by necessity brings the application window to the front every time
-
Import issue for ABAP program in Production Server ?
Hi Experts, I have an ABAP program which gets executed properly in BW Development server but getting the following error when I am trying to execute it in the BW Production while I could activate the program successfully. Kindly help me to resolve t
-
J2EE Connection Architecture - Client Socket implementation
I have a requirement to use a Socket connect to a quote vendor and ask for a quote(s) then receieve the response. The request looks like SQL except for the stream level info like lengths etc.. I wonder if anyone has implemented something like this as
-
Custom MAIN.JSP adding URL for email needs email var
IDM 7.1 Hello forum members! I have a very small request in this topic; I'm a newbie to IDM and started mods of forms/menus via BPE. I am customizing /idm/user/main.jsp to display an url where the user can send and email, rather than creating a workf
-
Error al leer un módulo de Sound and vibration durante deployment
Buen día Estoy tratando de usar el bloque de Envelope detection de la libreria sound and vibration en mi NI myRIO pero cuando Labview hace el Deployment me aparece este error : Failed to load shared library sndvib.*atDecimationH:C . Ensure that the