Problem when trying to transfer messages using the...
Hey all.
I rang Nokia Support today, but they didn't seem to understand the issue that I was having, so I've decided to post it here.
I reesently sent my N95 away to be repaired, because it had a broken speaker. I got it back on monday, and decided that I would try and transfer the messages from my old N73 to the N96. I launched the Switch application on the N95, and turned Bluetooth on on the N73. I selected the messages option from the list, and hit the ok option. After fetching about 250 messages, I noticed that the status line on the screen wasn't updating, so I figured that for some unknown reason the message transfer had crashed. I hit the stop option on the N95, and got a message stating that the connection had been broken. I checked in the inbox of the N95, and saw that some of the messages were there. I attempted to transfer the itoms again, and this time the connection held. However, upon recieving all of the messages from the N73, the N95 informed me that It was sending messages to the N73! I figured that this must be because it was sincrinising the messages that it had first attempted to fetch (the first time, when the connection broke). When it had finished, I checked in the inbox of both phones. The N95 had the correct number of messages, and so, surprisingly did the N73.
So my question: does anyone know what would have happened to the messages that the N95 attempted to fetch first (the time the Bluetooth connection broke half way through), and the messages that the N95 had transfered to the N73?
I am assuming that may be after transfering both of the phones look through the messages, and if it finds any messages with the same timestap it just overwrites them. If someone knows the answer to this question, please let me know.
Sorry for the long post, and I hope everyone understands my question!
Thanks a lot in advance,
Elliott.
Never had a transfer crash on me before. Apart from using switch to transfer, I also use it to sync my phones and that also involves the messges being transferred back and forth except I do it fairly regularly and I have yet ended up with any duplication. Hence, your theory about the phone checking checking for dupliction is probably correct.
Similar Messages
-
Problems when trying to transfer location from ECC to APO
Hello,
I am trying to transfer some locations from ECC to APO via CIF, but a system error appears: "Message no. SR053, data error for the location address 1000". For this reason I have not been able to transfer any location to APO. Could anybody tell what could the problem?
Thanks in advance,
DavidHello Tiemin,
Thanks for your answer. Based on your answer we changed some settings and now we are able to transfer locations from ECC to APO, but the error message is still showing, so even tough the error is not stopping the transfer now, we are not able to find what could be the problem. Any more ideas about what we need to check?
Thanks againg for you help.
David. -
Another problem when trying to open iTunes8 for the first time
I have just downloaded iTunes8 and after the installation received the message: - "iTunes has been installed successfully./"
However, when trying to open it, I too have a problem and the message I get is: - "iTunes cannot run because some of its required files are missing. Please re-install iTunes."
The previous version ran OK and I have de-installed it and re-installed it 3 times and each time I get the same message that it has been installed successfully but the same message sayind ome files are missing when I try to open it.
I have checked the QTime is up to date and it is. Anyone else had this problem?I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?
-
Error -25596 when trying to connect to use the Informix Online Server native data source
Hi All,
We currently use a very old version on crystal (v9) and have recently downloaded the current version (14.1.1.1036) in order to investigate the effort involved in upgrading.
In the past we have always connected to our IBM Informix Server using the native Crystal Reports Informix Online Server data source, but all attempts with the current version of Crystal Reports are failing with error -25596.
The error is reported by Informix and it has this description:
-25596 The INFORMIXSERVER value is not listed in the sqlhosts file or the
Registry.
The default database server name that the INFORMIXSERVER environment
variable specifies must be a valid database server name in the file
$INFORMIXDIR/etc/sqlhosts on UNIX or the registry on Windows. Check
that the specified server is listed in the sqlhosts file or the
registry.
However, I'm of the opinion that the server is known and is configured OK (it's configured using the Informix SetNet32 application and it has resulted in this registry key being populated:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Informix\SqlHosts\prod1_devdb1 (NB: prod1_devdb1 is the name of the server I am trying to connect to).
I can create ODBC datasources on my PC and they work OK. I can also run our legacy VB6 application (using the Crystal 9 COM objects) and connect using the native drivers to the Informix database.
My PC is running 64 bit Windows 7 Enterprise (fully patched). Our Informix server is version 11.7 running on a SUSE server.
Any suggestions for where to start looking to solve this?TIMESTAMP
THREAD_ID
FILENAME
LINE_NUMBER
LOGGED_DATA
LEVEL
2014-5-1-3-54-31
10828
..\cserrinf.cpp
523
Error 14722 (..\csdll.cpp, 117): : C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crw32_res_xx.dll
1
2014-5-1-3-54-51
10828
.\QESession.cpp
445
Set Product View Locale: 1033
20
2014-5-1-3-54-51
10828
.\QESession.cpp
479
Set Preferred View Locale: 3081
20
2014-5-1-3-54-51
10828
.\QESession.cpp
501
Set Process Locale: 3081
20
2014-5-1-3-54-51
10828
.\qecommon.cpp
117
This property is currently in a read-only state and cannot be modified. File Name: ".\QEProperty.cpp". Line: 217
1
2014-5-1-3-54-54
10828
.\xml.cpp
211
Leaving DbInitialize()
20
2014-5-1-3-54-54
10828
.\xml.cpp
153
In DbInitialize()
20
2014-5-1-3-54-54
10828
.\xml.cpp
211
Leaving DbInitialize()
20
2014-5-1-3-54-54
10828
.\xml.cpp
385
In DbFetchDatabaseType()
20
2014-5-1-3-54-54
10828
.\xml.cpp
399
Leaving DbFetchDatabaseType()
20
2014-5-1-3-54-54
10828
.\xml.cpp
4732
In DbFreeString()
20
2014-5-1-3-54-54
10828
.\xml.cpp
4735
Leaving DbFreeString()
20
2014-5-1-3-54-54
10828
.\jdbc.cpp
241
Leave DbInitialize()
20
2014-5-1-3-54-54
10828
.\jdbc.cpp
185
Enter DbInitialize()
20
2014-5-1-3-54-54
10828
.\jdbc.cpp
241
Leave DbInitialize()
20
2014-5-1-3-54-54
10828
.\jdbc.cpp
555
Enter DbFetchDatabaseType()
20
2014-5-1-3-54-54
10828
.\jdbc.cpp
564
Leave DbFetchDatabaseType()
20
2014-5-1-3-54-55
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-54-55
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-54-55
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-54-55
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
194
Leaving DbInitialize()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
148
In DbInitialize()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
194
Leaving DbInitialize()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
317
In DbFetchDatabaseType()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
326
Leaving DbFetchDatabaseType()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
1858
In DbFreeString()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
1861
Leaving DbFreeString()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-54-57
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-54-57
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-2
10828
.\crdb_wic.cpp
182
Leaving DbInitialize()
20
2014-5-1-3-55-2
10828
.\crdb_wic.cpp
127
Enter DbInitialize()
20
2014-5-1-3-55-2
10828
.\crdb_wic.cpp
182
Leaving DbInitialize()
20
2014-5-1-3-55-2
10828
.\crdb_wic.cpp
381
Enter DbFetchDatabaseType()
20
2014-5-1-3-55-2
10828
.\crdb_wic.cpp
397
Leave DbFetchDatabaseType()
20
2014-5-1-3-55-2
10828
.\crdb_wic.cpp
404
In DbFreeString()
20
2014-5-1-3-55-2
10828
.\crdb_wic.cpp
407
Leaving DbFreeString()
20
2014-5-1-3-55-9
10828
..\crdb_p2s.cpp
570
Entering SQLLogOnSQLServerWithExtendableOptions
20
2014-5-1-3-55-45
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-45
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-45
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-55-45
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-46
10828
..\crdb_p2s.cpp
577
Leaving SQLLogOnSQLServerWithExtendableOptions
20
2014-5-1-3-55-46
10828
..\serverhandle.cpp
356
succeeded: serverName=prod1_devdb1,databaseName=globalstar,userID=scottr
1
2014-5-1-3-55-46
10828
..\..\convert.cpp
864
Error: message=, DbError=202
1
2014-5-1-3-55-46
10828
..\cserrinf.cpp
523
Error 31816 (..\..\src\data\queryenghelp.cpp, 549): Logon failed.:
1
2014-5-1-3-55-53
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-53
10828
..\..\src\print\format\imageretriever.cpp
905
Destroy API called. Image Retriever was not used. No cleanup necessary.
20
2014-5-1-3-55-53
10828
.\xml.cpp
219
In DbTerminate()
20
2014-5-1-3-55-53
10828
.\xml.cpp
271
Leaving DbTerminate()
20
2014-5-1-3-55-53
10828
.\jdbc.cpp
250
Enter DbTerminate()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
203
In DbTerminate()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
252
Leaving DbTerminate()
20
2014-5-1-3-55-53
10828
.\crdb_wic.cpp
190
In DbTerminate()
20
2014-5-1-3-55-53
10828
.\crdb_wic.cpp
241
Leaving DbTerminate()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
203
In DbTerminate()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
252
Leaving DbTerminate()
20
2014-5-1-3-55-53
10828
.\crdb_wic.cpp
190
In DbTerminate()
20
2014-5-1-3-55-53
10828
.\crdb_wic.cpp
241
Leaving DbTerminate()
20
2014-5-1-3-55-53
10828
.\xml.cpp
219
In DbTerminate()
20
2014-5-1-3-55-53
10828
.\xml.cpp
271
Leaving DbTerminate()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\xml.cpp
112
Leaving DllMain()
20 -
Run Into Problem When Trying Not To Hard Code the Host Name
My code (using the JavaMail API) works fine when the SMTP host name is hard coded in the program:
props.put( "mail.smtp.host", "TheHostName" );Then, I tried to put the host name in a properties file (smtpServer.properties). The properties file is in the $TOMCATHOME\webapps\AppName\WEB-INF\classes\resources directory. And the properties file has this one single line:
smtpServer = TheHostName //Note: The host name has only alpha characters, dots, and dashesIn my program, I did:
private final String PROPFILE = "resources/smtpServer.properties";
private Properties oProp = null;
public SendBatchMails() // this is the constructor in my class
try
oProp = new Properties();
oProp.load ( getClass().getClassLoader().getResourceAsStream( PROPFILE ) );
catch( IOException oEx )
System.out.println("Unable to load the Properties " + PROPFILE + oEx );
String smtpServer = oProp.getProperty( "smtpServer" );
Properties props = System.getProperties();
props.put( "mail.smtp.host", smtpServer );And, I got this runtime error:
java.lang.IllegalArgumentException: argument type mismatch
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:324)
org.apache.commons.beanutils.PropertyUtils.setSimpleProperty(PropertyUtils.java:1789)
org.apache.commons.beanutils.PropertyUtils.setNestedProperty(PropertyUtils.java:1684)
org.apache.commons.beanutils.PropertyUtils.setProperty(PropertyUtils.java:1713)
org.apache.commons.beanutils.BeanUtils.setProperty(BeanUtils.java:1019)
org.apache.commons.beanutils.BeanUtils.populate(BeanUtils.java:808)
org.apache.struts.util.RequestUtils.populate(RequestUtils.java:1252)
org.apache.struts.action.RequestProcessor.processPopulate(RequestProcessor.java:821)
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:254)
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)I would agree with Reply 1. From the stack trace it is apparent that it comes from Struts, where it is failing to set some kind of property in a bean. However the code that you posted doesn't seem to have anything to do with that. Check your Struts configuration.
-
I can't see my external disk source when trying to migrate data using the Migration Assistance.
I have an external hard disk (Lacie) with all my backed up data. After doing a clean install of Mavericks I now want to migrate my data using the Migration Asistance but it is not able to find the source.
Can anyone help please?
Thanks.Is the layer's visibility check box turned on or off? What is the layer's Blend Mode? What is the format of the original file?
-
Problems when trying to export VI using save hierarchy
I have a VI I want to send to another engineer at a different location. I know what version of LabVIEW they have, but I do not know if they have all the instrument drivers. I choose 'save hierarchy' to duplicate the VI and all it's dependencies to a seperate directory. It tells me some of my instrument libraries cannot be duplicated because they are already in memory, and asks if I want to rename them. I save the instrument libraries with a new name.
However, I notice the copied VI still links to the instrument libraries in my labview directory. How do I get the copied VI to link to the renamed instrument library?
What is the easiest way to get the VI to my fellow engineer and be sure it will be executable? Make it into an .exe?Hi bigt,
The best way to distribute applications to other users for simply running the code is using an installer. First you will build an executable then package it in an installer where you can choose other files to install with the executable.
Stephen Meserve
National Instruments -
Itunes crashes when trying to transfer music
I have been having problems with my new 160gb ipod classic and transferring songs from itunes. I have had no problems with it verifying the ipod. When I try to transfer songs it will just crash for no reason and blue screen my computer. I've just updated my computer to Windows 7 and installed itunes 9.2, my previous Windows Vista was using 9.0 and I had no problems. Is anyone else having crashing issues when trying to transfer songs? The only way I have been able to get my songs onto the Ipod is doing it 2-3 songs at a time and even then it will still crash eventually. This is taking forever to import my cds onto my boyfriends new Ipod. I have yet to try my own Ipod classic to see if that has problems as well.
Did You try downgrading iTunes to older version ? I can see that others have had problems with new version of iTunes. If that fails, try to select playlists in iTunes to sync one by one ( manually of course ).
-
How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?
Hey tyjox,
Thanks for the question. After reviewing your post, it sounds like you need to deactivate Find My iPhone on a device that does not work. You will need to work with the family member of the account the iPhone is registered with. I would recommend that you use this article to help you resolve or isolate the issue.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
Remove an iOS device you no longer have
If you no longer have the iOS device because you gave it away or sold it, you need to remotely erase it before you can remove it.
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud).If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, then select the device.
Click Erase [device], then enter your Apple ID password. Because the device isn’t lost, don’t enter a phone number or message.If the device is offline, the remote erase begins the next time it’s online. You’ll receive an email when the device is erased.
When the device is erased, click Remove from Account.All your content is erased and someone else can now activate the device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
On my Ipad I seem to be having a problem when trying to play YouTube videos embedded on Facebook.
When I click the links, I get a message saying: "Flash Player upgrade required."
and under it, it says, "You need to download and install the lastes version of Adobe Flash Player to view this content"
and also a green button saying "Get Flash Player"
I get this if using chrome or safari .
I can go direct to YouTube it just works.The Facebook link to the video is accessing an Adobe Flash video. Unfortunately, no iOS devices can play flash.
-
i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance
i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance
-
I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.
At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
When editing in Photoshop just add a box or mark on the image, for your tests.
- If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
- If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect. -
My problem - when syncing and error messages comes up: iTunes could not sync calendars to the iPhone because an error occurred while margin data." I've tried turning the phone off and back on, & tried both USB ports but get the same thing. What can I do next since it doesn't give me even one clue as to what the error would be?
Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted : a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone. I deleted that event, then went through the calendar resync one by one, and all seems OK now.
In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them. It would be nice to have a similar way to work with Calendar!
Thanks for pointing me to the right article. -
I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can I see the choices at the bottom of that window?
I tried to send it through gmail and the acct is a POP acct
I'm not concerned about sending to the long address list. I just can't get the email and window that says "cannot send emai using the server..." to go away. The default must be "retry", because although I cannot see the choices at the bottom of the window if I hit return it trys again... and then of course comes back with the very long pop up window that I cannot see the bottom of so I can tell it to quit trying... -
When trying to uninstall iTune (because the current install has problems; iTune error message states it cannot sync and that I should reinstall the application; also, it fails when I tried to upgrade to the latest release), I get the error message 2324. What should I do to reinstall the application?
That installer error is a "Can't open file" error
It suggest that you may have a corrupt file.
Try running a disk check
http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors
If it fixes errors try uninstalling iTunes again.
If that doesn't work, is it possible for find out the name of the problem file, is further information available? Try looking in your Action center - that's on the control panel. Another place is in the Windows Error logs. From the start menu , right click on "Computer" and select manage, then Event viewer.
If nothing emerges, try a manual uninstall of iTunes and related programs according to this method:
http://support.apple.com/kb/HT1923
Don't worry if an uninstall fails, that is expected. Go on to the part where you have to delete files (2. Verify iTunes etc completely deleted) . Hopefully you manage to find a file that can't be deleted, that is the one we will need to deal with.
Maybe you are looking for
-
Just curious if any updated device profiles have been made available for download via the feed service in ISE 1.2?
-
Whenever I updated or downloaded a new app from the App Store, a message appears saying: "Account Not In This Store Your account is not valid for use in the U.S. store. You must switch to the Swedish. store before purchasing." I made some research on
-
Help me download pdf without going through Pages first
SO I was in a hurry one day. A window pooped up asking how I wanted to open a .pdf I clicked down to Pages (because I erroneously thought it would save me time moving the info to a thesis paper.) I must have also clicked do this every time, because w
-
Help, all flash videos are cropping randomly. Also, when I go full screen, the video doesn't fill up the entire screen like it used to. I still see black frame on all sides. It only happens on Firefox. I tried uninstalling both flash and firefox then
-
Oracle 11g "Oracle Database Configuration Assistant" failed
Hi am trying to install oracle 10g databse . am getting Configuration assistant "Oracle Database Configuration Assistant" failed in log file i see [Thread-19] [18:32:29:343] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE [Thr