Problem when trying to upgrade OSX

Hi, when i am trying to update my osx lion to the new mavaricks, i get this pop-up:"There was an error in the App Store. Please try again later. (13". What does that mean? and how can i fix it? Thank you

You may need to update Lion to 10.7.5 first before you go to Mountain Lion.
http://support.apple.com/kb/DL1583
Apply the Combo updater, then try again. Remember, Mountain Lion is a big program; it takes some time.

Similar Messages

Problem when trying to upgrade ipad 2 to ios 5

I was attempting to upgrade my ipad 2 to ios 5. It went through the backup but then couldn't restore. Now itunes won't recognize the ipad and even after a soft reset the ipad is showing only the itunes logo and a photo of the usb cable. Help!!

See if putting it into recovery mode helps : http://support.apple.com/kb/ht4097

On my Ipad I seem to be having a problem when trying to play YouTube videos embedded on Facebook. When I click the links, I get a message saying: "Flash Player upgrade required." and under it, it says, "You need to download and install the lastes vers

On my Ipad I seem to be having a problem when trying to play YouTube videos embedded on Facebook.
When I click the links, I get a message saying: "Flash Player upgrade required."
and under it, it says, "You need to download and install the lastes version of Adobe Flash Player to view this content"
and also a green button saying "Get Flash Player"
I get this if using chrome or safari .
I can go direct to YouTube it just works.

The Facebook link to the video is accessing an Adobe Flash video. Unfortunately, no iOS devices can play flash.

IMac shuts down when trying to upgrade from Tiger to Leopard

My iMac, purchased in November of '07, came installed with Tiger but also came with a Leopard OS update disk. When trying to upgrade to Leopard last week, every time I rebooted off the disk the computer would run for a minute in the gray screen and then suddenly shut off with no warning message. I checked HD in disk utilities, repaired my permissions and tried again with the same results. I've got 30 gigs of free space and 4 gigs of RAM which should be plenty. I talked to Apple support who walked me through the installation procedure with the same results and ended up shipping me a new install disk which came today. I am getting the same shut down on reboot with their replacement disk. Apple actually sent me two white disks. The first is labeled "For Mac Computers, Mac OSX Install disc 1" The second is labeled "MacBook, Mac OSX Install Disc 2" Since the second disc is label "MacBook" is it possible they sent me the wrong set of discs?
Thanks

rk87,
Thanks for replying. I have a 500 gig hard drive which yields a 465gig usable capacity, so, at 30 Gigs available, I don't have 10% of the drive free. This may be an issue, but my more immediate problem is that I can't get the install disk to boot up at all.
I called apple support again see what I could find out about the install disks which wouldn't work. The support guy seemed like he had a lot of knowledge about the system and suggested trying the Tiger install disk (that came with the machine) to see if it would boot up, which it did. After that success, I tried the Leopard update disk in another iMac I have at home and it worked as it should. Since the disk worked fine on the other mac, the guy at tech support speculated that there is some sort of hardware issue causing the install shut down on the computer in question.
His speculation was about the memory installed in the machine which might be the issue. I had bought the computer from an Apple Authorized store here in town who upgraded the RAM to 4GIGs using third-party memory. Even though the memory seems to have functioned properly for the past year, apple support says that there could be some sort of incompatibility with the third party product causing the install disk not to work.
Apple support told me about running a memory diagnostic off of the Tiger install disk by rebooting with the disk in the computer and hold down the "D" key. After I got off the phone I ran the test which turned out to take an hour in its long version. The test indicated no problems, but apple had told me that it might not be totally conclusive. At this point, I'm taking the computer back to the store where I bought it and will let them figure it out.

Error code 23 when trying to upgrade???

Error code 23 when trying to upgrade/ also have lost wi-fi connection. A coindence or related problem?

Hi Dauby51,
You may need to uninstall and reinstall PSE 11, then reapply the updates.
Make sure you don't have any disk cleanup utilities that might be running during and after the install that may be altering any of the files installed or installation paths.
Give this a try and let me know how it goes,
Regards,
Pete

Error when trying to upgrade scsm dw 2012 sp1 to r2

Hello,
when I trying to install scsm 2012 r2 upgrade on my scsm dw server error appears.
does anyone faced and successfully resolved this problem?
regards,
Ilgar
Regards, Ilgar Khalilov.

This issue might happen if you have a space in the DW Management Group name.
Maybe this blog post from Anders Asp is helpful:
Strange error message when trying to upgrade SCSM 2012 Sp1 to SCSM 2012 R2
Andreas Baumgarten | H&D International Group

When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle, after it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"

When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle.
After it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"

Hi bahaluly,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are not able to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
Get help with iOS update and restore errors - Apple Support
Solve network errors
Related errors: 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200, or "There was a problem downloading the software," or "The device isn't eligible for the requested build." These alerts mean that your computer is either having difficulty contacting the Apple update server or communicating with your device.
Check your computer for software or settings that might cause communication issues between your computer and Apple or between your computer and your device.
Cheers,
Mario

Keep getting error -5000 when trying to upgrade to ios5 on iphone 3GS

Keep getting error -5000 when trying to upgrade to ios5 on iphone 3GS

+error message 2378+
That typically indicates a problem with your VBScript. See the following troubleshooting article:
iTunes and QuickTime for Windows cannot be installed without Visual Basic Script (VBScript)
(The Vista instructions are down at the bottom of the document.)

I got problem when trying to contact my iphone 4 using facetime,it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.

i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

I am having the problem when trying to take a panorama picture. It may only take the first frame or doesn't even start at all when I press the shutter button. even though when i hold the phone straight up and down, so that camera is at the top

I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?

To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back.

How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?

How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?

Hey tyjox,
Thanks for the question. After reviewing your post, it sounds like you need to deactivate Find My iPhone on a device that does not work. You will need to work with the family member of the account the iPhone is registered with. I would recommend that you use this article to help you resolve or isolate the issue.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
Remove an iOS device you no longer have
If you no longer have the iOS device because you gave it away or sold it, you need to remotely erase it before you can remove it.
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud).If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, then select the device.
Click Erase [device], then enter your Apple ID password. Because the device isn’t lost, don’t enter a phone number or message.If the device is offline, the remote erase begins the next time it’s online. You’ll receive an email when the device is erased.
When the device is erased, click Remove from Account.All your content is erased and someone else can now activate the device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.

At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
When editing in Photoshop just add a box or mark on the image, for your tests.
- If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
- If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect.

I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can

I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.

Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About?

TS3694 Hi I am getting an error 3194 when trying to upgrade my ipad 2 to IOS v 5.1, any tips?

Any advice on the eror code 3194 when trying to upgrade to IOS v5, i cannot download the lateste version of iTunes and cannot do a restore because of this error?
Thanks

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
See
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Problem when trying to print standart invoice crystal report for SAP

Hi All, I have the following problem when trying to print a system invoice report in crystal reports for SAP
I pass params and load the report using this code
Private Sub DisplayThreadReportSeq()
Dim oView As New frmViewReport
Dim strReportPath As String = ""
Dim strParamName As String = ""
Try
Dim CR As New ReportDocument
CR.Load(oReport.CrstPath)
' Declare the parameter related objects.
SetReportValues(CR)
Dim crParameterDiscreteValue As ParameterDiscreteValue
Dim crParameterFieldDefinitions As ParameterFieldDefinitions
Dim crParameterFieldLocation As ParameterFieldDefinition
Dim crParameterValues As ParameterValues
' Get the report's parameters collection.
For Each oPar As cslParam In oReport.Params
crParameterFieldDefinitions = CR.DataDefinition.ParameterFields
crParameterFieldLocation = crParameterFieldDefinitions.Item(oPar.ParName)
crParameterValues = crParameterFieldLocation.CurrentValues
crParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue
crParameterDiscreteValue.Value = oPar.Value
crParameterValues.Add(crParameterDiscreteValue)
crParameterFieldLocation.ApplyCurrentValues(crParameterValues)
Next
If pPrint Then
If oReport.Printer "" Then
CR.PrintOptions.PrinterName = oReport.Printer
End If
CR.PrintToPrinter(IIf(oReport.Copies = "", 1, oReport.Copies), False, 0, 0)
SBO_Application.StatusBar.SetText("Printed Document Successfully", SAPbouiCOM.BoMessageTime.bmt_Medium, SAPbouiCOM.BoStatusBarMessageType.smt_Success)
Else
oView.Text = pReport
oView.TopMost = True
oView.Viewer.ReportSource = CR
oView.Hide()
oView.ShowDialog()
End If
Catch ex As Exception
Util_GenErrorLog("DisplayReport", ex)
End Try
End Sub
This code works fine when the report invoke to print is developed in crystal reports version for .net 2008 or .net 2005
when trying to print a report standart getting from SAP BO 8.8.1 using this code I getting the following error:
Error in File C:UsersecombaAppDataLocalTemp5ARInvoiceStandartSap {300B9A68-DF05-4D7B-8F3B-1670A4493BEE}.rpt:
Error in formula .
'Shared numberVar SectionTotalMaxHeght;
A number, currency amount, boolean, date, time, date-time, or string is expected here.
This report is the standart report that SAP 8.8.1 includes and works fine on SAP.
I referenced this dlls CrystalDecisions.CrystalReports.Engine.dll, CrystalDecisions.CrystalReports.Shared, version 10.2.3600
How I can get these dll´s version for Crystal Report 2008 for SAP Business one or How I can solve this problem
thanks in advance,
Ezequiel.

Hi Ezequiel,
You can try to search in SAP Business One Reporting & Printing forum section or post there.
nd.Q

Problem when trying to upgrade OSX

Similar Messages

Maybe you are looking for