Problem when updating firmware on n93i

i bought a n93i on ebay last month. the phone is from Finland and i am in the US. then i found out they have newer firmware on my phone so i try to update it. in the middle of updating it was disconnected by the pc or the program. then the dialog box said i have to remove the battery and plug in again and then start the phone again. but it still couldnt connect it and now the phone only has the nokia logo in the front display when it is on and nothing on the main display. how can i fix it? do i have to send it back to Finland? the nokia here says they can't do anything about it because the phone is made in Finlad and the model is not supported in the US. please someone help me.

Thats one of main pitfalls of importing phones (and most other electronic goods) from another country, you do not get a warranty. If anything goes wrong then most of the time there is nothing that you can do.
Nokia's that were made in Finland can be found all over the world and the warranty is only valid in the country that it was designed to be sold in, except for Europe where the warranty is valid in all European countries.
Your last hope of fixing it yourself is to read this thread:
/discussions/board/message?board.id=hardware&messa​ge.id=4118#M4118

Similar Messages

  • Problem when updating firmware

    This morning itunes asked if iwanted to update the firmware on my 16gb ipod touch so i did. half way thourgh it said was unable to update now it just gives me the Connect iPod touch to iTunes screen when i do it says to restore and update and when i try that it just gets half way and says unable due to error.
    has any one else had this problem? If so could some please help.

    What security do you have on your computer. McAffe has a special firewall that can be accessed for block Potentially Unwanted Programs, but I don't know how to turn it off. You may want to contact McAffe personally.

  • Problem when updating firmware on Time Capsule

    Hello,
    For some reason I cannot update my Time Capsule's firmware. The update starts but is then stop and the dialog that appears refers to an unexpected problem. On one occasion the number "54" was in the dialog as well. Any idea anyone on how to solve this?
    BR/Anders

    Cannot say I have ever seen one fail..
    Reset the TC to factory.. full factory reset.. hold in the reset button and power on the TC.. keep holding for 10-15 sec until the front LED flashes rapidly.
    Ensure the TC has a good direct internet connection. You do not get the firmware first, like most routers.. the TC pulls the firmware down itself.
    On Lion use 5.6 utility.. the version in Lion is for toyland. Ignore it completely.
    http://support.apple.com/kb/DL1482
    5.6 is a tool. A utility.. !!

  • I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error.

    I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.

    If you have no photos:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
    Regards
    TD

  • I have a problem when updating applications on iOS 7.0.2

    I have a problem when updating apps on iOS 7.0.2 to go to the appstore I get the update but only tells me open, not update, I have to uninstall and reinstall te app and gives me the option to update. Sorry my bad english

    I am in the process of installing 9i on SUSE Linux 7.2. The only Linux that is certified to run 9i. The machine is is a fresh install of SUSE. I am running into the same problem. I ran through the first make problem by going to a shell and invoking a make -f oemagent.mk. Built the library just fine. Got errors when trying to run make -f ins_rdbms.mk. Not sure why the installer or the command line is having problems.
    Not sure if I can just hit Ignore and go on????
    Any help would be appreciated. You would think 9i would spread like butter on their "Certified" platform.

  • I have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!

    i have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!.
    one more question when i phone5 update with iOS 8.1.2 this iOS supported iphone5???

    Hi Ios 8.1.2 Should work on iPhone 4s / 5 You may have a bug Backup to  cloud over WiFi Then Restore back to Factory  Settings This will make iPhone as new. Use same Apple ID & you will get your Apps & Data back Do Restore over your WiFi. Cheers Brian

  • Hlep.. Problem when updating aspx templates

    Hi there, I-m having a huge problem when updating pages from
    a .asp template, it replaces my 1 line of code
    with <%@ Page Language="VB" ContentType="text/html"
    ResponseEncoding="iso-8859-1" %> and errases the resto of the
    attributes i have on each page, making it unfunctionable.
    Does anyne know why the template when updating does that?
    thanks for your help

    Hi Suman,
    The changes are getting lost when i logout and login back to SAP.
    In Current session i am able to see the changes. But changes are lost as soon as i end up my session,
    but this is happening only in case of template box width. All other changes are retained between my various SAP sessions.
    So wanted to know if any other value is over-writing the template box width values.
    Regards
    Manpreet Singh

  • I have problem when update to belle the folder of ...

    I have problem when update to belle the folder of games disappear??  c7
    I need to solve ??? Plus

    Do you mean that pink folder w/ the controller icon on it?  I lost that too on my N8.  Actually, lost all of the folders that came with Anna like Applications & Music.  Wish I could get them back as now I can only make the generic yellow folder which isn't as aesthetically appeasing.
    However, reading articles on Belle there was a picture of a Belle N8 with the games folder shortcut on the homescreen - so maybe it still exists & I just cannot find it.
    Good luck & I'll let you know if I figure this out.

  • Validation problem when update a row in OAF

    created a application using OAF. No problem to create a row, when tried to update the row, received the following error message:
    oracle.jbo.RowValException: JBO-27012: Row validation method validation() failed for row with key oracle.jbo.Key
    2) Steps to Reproduce
    select a row from search result page for update, after change the value and apply it, received the following error message:
    oracle.jbo.RowValException: JBO-27012: Row validation method validation() failed for row with key oracle.jbo.Key

    yes. it is the EO based VO page. Create and Update used same VO and no problem to create the row, had problem when update the row.

  • I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6  Please see spec

    I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6  Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW025, DW050 ... WARNING: DW024, DW025 ..., please advice me the step to re-install the Pro-X. Thanks

    Please follow Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
    Do let us know if it worked.
    Regards
    Rajshree

  • HT1688 why does my 3gs say activation server temp unavailable when updating firmware?

    why does my 3gs say activation server temp unavailable when updating firmware? it also tells me no service in the top left corner please help i cant get out of activation screen

    Only fixed this in the last day or two . . .with this!
    https://discussions.apple.com/thread/3588501?start=0&tstart=0

  • Why does my 3gs say activation server temp unavailable when updating firmware?

    why does my 3gs say activation server temp unavailable when updating firmware? it also tells me no service in the

    It could be related to activation servers being busy, or you can check this support document for assistance. http://support.apple.com/kb/TS4268

  • Failure when updating firmware. Write error in disc

    I have tried to update the software of my ipod of fifth generation and leaves a message that puts: failure when updating firmware. Write error in disc. Please, only it have 20 days. I need help. I have proven to put it in way disc, I have to reinstall software and nothing gives result.

    here is a good place to start with that error:
    "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod

  • Do my messages get deleted when updating firmware?

    Subject asks it all ^_^

    Nothing should be deleted when updating firmware. However, standard practice when updating ANY computer's OS is to do a complete backup first. With the iphone, that means either performing a sync(first part of the sync process is a backup), or right clicking the phone in the device pane & selecting backup. That way, should anything go wrong, you have a current backup to restore from.

  • Problem when updating Management Engine (ME) firmware - photo attached

    Hello All:
    I have encountered a perplexing problem when attempting to update the firmware in the Intel Management Engine.  The firmware update is posted on the W520 driver page (it is package 83rf32ww).  The problem is the error message shown in the photo below.
    The update process starts when the MEUpdate.CMD file is selected within the DOS window, but after a few seconds, the error message at the bottom of the picture appears.
    Any suggestions would be appreciated.
    Thanks,
    Michael
    Solved!
    Go to Solution.

    Yes, except you're running it from C:\Windows\system32 rather than the expected C:\DRIVERS\WIN\ME.
    Basically, you have to navigate to the folder FIRST, then run the file.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Maybe you are looking for

  • VLC and Adium crashing

    Hello, everyone. First of all, I'm new to this forum, so please forgive me if this is being posted in the wrong section. I'm having some trouble with the applications Adium and VLC. I was already having those problems with my old MacBook White and, w

  • Configurable Material

    Dear SAP Gurus, I have created one finished material and checked on "Material is configurable" in basic data 2. And maintain all other characterstics (depending on the various attributes of material like voltage consumption,manufacturer etc etc) , cl

  • Com.evermind.server.http.HttpIOException: Connection aborted by peer: socke

    Hi I get an this stack on the server side while doing a forward using RequestDispatcher. com.evermind.server.http.HttpIOException: Connection aborted by peer: socket write error at com.evermind.server.http.EvermindServletOutputStream.flushBuffer(Ever

  • Need help removing adobe ID from creative cloud

    I recently purchased a computer from a buddy. I uninstalled creative cloud then reinstalled it after logging in to my adobe id online. the problem is every time i go to download an adobe program a creative cloud window pops up asking me to verify my

  • Music from itunes will not sync with iphone 5

    I just upgraded from iphone 4 to 5 and didnt have time for verizon to sync my phone so i did it when i got home. the music from my itunes will not sync with my phone. it shows the music on the usage bar when the phone is plugged in but shows no conte