Problem when updating firmware on Time Capsule
Hello,
For some reason I cannot update my Time Capsule's firmware. The update starts but is then stop and the dialog that appears refers to an unexpected problem. On one occasion the number "54" was in the dialog as well. Any idea anyone on how to solve this?
BR/Anders
Cannot say I have ever seen one fail..
Reset the TC to factory.. full factory reset.. hold in the reset button and power on the TC.. keep holding for 10-15 sec until the front LED flashes rapidly.
Ensure the TC has a good direct internet connection. You do not get the firmware first, like most routers.. the TC pulls the firmware down itself.
On Lion use 5.6 utility.. the version in Lion is for toyland. Ignore it completely.
http://support.apple.com/kb/DL1482
5.6 is a tool. A utility.. !!
Similar Messages
-
Problem when updating firmware
This morning itunes asked if iwanted to update the firmware on my 16gb ipod touch so i did. half way thourgh it said was unable to update now it just gives me the Connect iPod touch to iTunes screen when i do it says to restore and update and when i try that it just gets half way and says unable due to error.
has any one else had this problem? If so could some please help.What security do you have on your computer. McAffe has a special firewall that can be accessed for block Potentially Unwanted Programs, but I don't know how to turn it off. You may want to contact McAffe personally.
-
Problem when updating firmware on n93i
i bought a n93i on ebay last month. the phone is from Finland and i am in the US. then i found out they have newer firmware on my phone so i try to update it. in the middle of updating it was disconnected by the pc or the program. then the dialog box said i have to remove the battery and plug in again and then start the phone again. but it still couldnt connect it and now the phone only has the nokia logo in the front display when it is on and nothing on the main display. how can i fix it? do i have to send it back to Finland? the nokia here says they can't do anything about it because the phone is made in Finlad and the model is not supported in the US. please someone help me.
Thats one of main pitfalls of importing phones (and most other electronic goods) from another country, you do not get a warranty. If anything goes wrong then most of the time there is nothing that you can do.
Nokia's that were made in Finland can be found all over the world and the warranty is only valid in the country that it was designed to be sold in, except for Europe where the warranty is valid in all European countries.
Your last hope of fixing it yourself is to read this thread:
/discussions/board/message?board.id=hardware&message.id=4118#M4118 -
I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW025, DW050 ... WARNING: DW024, DW025 ..., please advice me the step to re-install the Pro-X. Thanks
Please follow Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
Do let us know if it worked.
Regards
Rajshree -
The Time Capsule is not providing a wireless connection.
When I reconnect my Time Capsule after a factory reset, the Airport Utility shows ther message"Unexpected error. Try again." I also get this if I cancel the Airport Utility app and restart it. I performed the factory reset again, restarted the Airport Utility and received the same error. What are the steps to debug and fix the wireless problem?
My Time Capsule is connected to my FIOS router and to my Mac Mini. I am still able to connect to the Internet from the Mini via ethernet. It seems that the Time Capsule acts as a bridge for the ethernet connections between Internet to FIOS, FIOS to Time Capsule, and Time Capsule to Mac Mini.Which model TC is this? The A1xxx number from the base please.
Try the setup in full isolation from the network.. so unplug the TC from the network.. and turn off wireless in the mini.. so you have mini--ethernet--lan port TC.. and nothing else.
Do the factory reset.
Now check if TC comes up in airport utility..
If it fails, turn on ipv6 local link.. if you are using 6.3 utility this could be necessary.
Still fails, try loading the v5 utility.. you will need to plug the computer back into the FIOS to get internet. Then depending on OS.. Lion according to your profile.. you can just down the utility.. ML takes more steps.
See below.
Do you have an iphone or ipad.. download the airport utility app and use those for the setup.. that can sometimes work better.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0 -
Can't post new firmware on Time Capsule
Through the airport utility, I followed the prompts to do the firmware updates to 7.3.2 However, it won't install the update on my time capsule, only on the network extenders (older airport extreme and one airport express). It gives me a message that it needs to be in range or connected via ethernet, both of which it is.
Do I need to do a reset, or hard reset? I am always scared to loose some setup info when I start fresh!
Also, ever since I added the time capsule as my base station, I can only intermittently connect wirelessly to the internet from my iphone or laptop, although they both show strong wifi connections to the network, and ethernet connects to the internet through the same timecapusle. ??
Thanks if anyone can help.Have you opened this one over a wireless connection in the past?
A strong warning: If you're trying to edit the Library (that is, make albums, move photos around, keyword, make books or slideshows etc.) or edit individual photos in it via Wireless be very careful. Dropouts are a common fact of wireless networking, and should one occur while the app is writing to the database then your Library will be damaged. Simply, I would not do this with my Libraries. -
I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.
I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help. -
I had a problem when downloading iTunes 11.1 and had to clear my disc and rebuild it from Time Capsule. Thats when I learned that Time Capsule stopped backing up back in January. So now I keep looking to see if Time Capsule is backing up but whenever I open the Time Capsule icon i get this error message. What does it mean and how can I fix the problem?
The backup is corrupted in some way.. you need to verify it.
The error is common enough but there seems to be a range of solutions.
Read the thread here.. https://discussions.apple.com/thread/3123920?tstart=0
Look particularly for the posts by Pondini.
And check his troubleshooting for methods of doing things like verify.
http://pondini.org/TM/Troubleshooting.html
A5 -
When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, WI'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster. -
When back up to time capsule I get the message no access to backupcopyfiledisc/Volume/Data/Terjesumac.sparsebundle ( error-1)
Try #C17 in Time Machine - Troubleshooting for known fixes. Works for me as well.
http://pondini.org/TM/Troubleshooting.html -
I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.
Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again. -
The following error pop's up as an [OK] dialogue box after logging in the iMac,
There was a problem connecting to the server "Time Capsule".
The share does not exist on the server. Please check the share name, and then try again."
As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
Any suggestions on how begin to work out how to achieve networking seamlesness?First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back. -
I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.
If you have no photos:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
Regards
TD -
I have a problem when updating applications on iOS 7.0.2
I have a problem when updating apps on iOS 7.0.2 to go to the appstore I get the update but only tells me open, not update, I have to uninstall and reinstall te app and gives me the option to update. Sorry my bad english
I am in the process of installing 9i on SUSE Linux 7.2. The only Linux that is certified to run 9i. The machine is is a fresh install of SUSE. I am running into the same problem. I ran through the first make problem by going to a shell and invoking a make -f oemagent.mk. Built the library just fine. Got errors when trying to run make -f ins_rdbms.mk. Not sure why the installer or the command line is having problems.
Not sure if I can just hit Ignore and go on????
Any help would be appreciated. You would think 9i would spread like butter on their "Certified" platform. -
i have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!.
one more question when i phone5 update with iOS 8.1.2 this iOS supported iphone5???Hi Ios 8.1.2 Should work on iPhone 4s / 5 You may have a bug Backup to cloud over WiFi Then Restore back to Factory Settings This will make iPhone as new. Use same Apple ID & you will get your Apps & Data back Do Restore over your WiFi. Cheers Brian
Maybe you are looking for
-
How Many Connections Created???
We have a customer running WLS 5.1 on Solaris vs. Oracle 8.1.6. Here is the configuration for the connection pool: weblogic.jdbc.connectionPool.ewDBConnectionPool=\ url=jdbc:weblogic:oracle,\ driver=com.manu.es.db.ESWeblogicDriver,\ loginDelaySecs=1,
-
Hello, my i-photo is a very old version and not compatible with aperture. What I would like to do is to keep all photos so far in i-photo and start a new library for the new photos in aperture. The problem is that I can't open aperture, the mac alway
-
Save the state of the bean within the bean
If i have a bean say BigBean which contains another bean say SmallBean. Both of SmallBean and BigBean implment seriablizable. If i save the BigBean, will the state of the SamllBean be saved automatically ?
-
How to configuration of pricing procedure based on the Region
Hi, please help me how to configuration of pricing procedure based on the Region in the roll out project. Thanks mustafa
-
My daughter has managed to forget her new passcode and now it says iphone disabled connect to itunes, but it wont let me....help!