Problem where the adobe report has pages rotated randomly

Please assist.  I use PDF 995 to generate PDF reports. When I open the reports, the pages are rotated randomly and if I rotate the page or pages affected, the rest of the pages that were correct are now re-rotated. Very frustrating. I have attached an example

Hi there,
Thank you for the information, I will follow up with the PDF 995 support
centre.
Just a question, I cannot find the Document > Rotate Pages in the menu
option.. see below:
Kind regards,
Sam

Similar Messages

  • HT1657 I cannot play my rented movie because itunes cannot locate where the original file, has anyone face this problem before? Where can I find the location of the downloaded movie?

    I cannot play my rented movie because itunes cannot locate where the original file, has anyone face this problem before? Where can I find the location of the downloaded movie?

    What did you use to download it with? iPad? iPhone? Computer?
    If it's an iPad/iPhone, play it using the videos app.
    If on the computer, look on the left side of iTunes in the library under movies.

  • My iphone 3gs has a vibrating problem where the phone continuously vibrates

    my iphone 3gs has a vibrating problem where the phone continuously vibrates

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting.
    If this does not work, set it up as new device: Use iTunes to restore your iOS device to factory settings - Apple Support
    If still no luck, get it checked by an Authorized Apple Service Provider or Apple:
    iPhone - Contact Support - Apple Support
    Has the software on your phone been modified at some point in the past?

  • Hi, my macbook 13" retina [a week old] keeps having problems where the keys/trackpad freeze and other times OS crashes itself. has anyone found/been given a solution? i cant get an applecare appt for 2weeks.

    hi, my macbook 13" retina [a week old] keeps having problems where the keys/trackpad freeze and other times OS crashes itself. has anyone found/been given a solution? i cant get an applecare appt for 2weeks.

    Book your Apple appointment now, in the mean time you can try a SMC reset.
    http://support.apple.com/kb/HT3964
    1 week old !, call Apple and tell them you need a priority appointment at a genius bar.
    http://www.apple.com/support/contact/
    http://www.apple.com/retail/
    1-800-692-7753
    Explain that he MBP is 1 week old, and you need it ASAP, they seem to be very responsive to these kind of issuses.
    All the best

  • PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com addin' add-in.

    I've installed Adobe Presenter V7.0.7 Build 7746. When I open an existing PowerPoint file and try and use Presenter, I get the following error: PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com addin' add-in. If you have seen this message multiple times, you should disable this add-in and check to see if an update is available. Do you want to disable this add-in?
    No, I don't want to disable it. When I click No, PowerPoint stops working. I get a message that says: Microsoft PowerPoint has stopped working. A problem caused the program to stop working correctly, Widows will close the program and notify you if a solution is available. My only choice is to click the Close program button.
    When I open the PPT file again, I get the same "experienced a serious problem" message. If anyone has a solution to this, I'd appreciate knowing what it is. It took me a while just to get the Presenter option to appear in the PowerPoint toolbar. Now that I have it, it's not working.
    Thank you!

    Thank you for your quick reply. Here are the answers to your questions.
    1. The file I'm having issues with was not created using any version of Presenter. It is simply a PowerPoint file.
    2. The file is a PPT not PPTX.
    3. I am running Windows7 and Office 2010.
    I think I might have found the solution to the problem. I opened the PPT file and saved it as a PPTX file. Then I clicked the Presenter option in the PowerPoint toolbar and was able to select different Presenter options with no issues. I opened other PPTX files and I did not get the error window stating 'PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com addin' add-in'.
    This seems to work. So, it appears that any PPT file needs to be saved as a PPTX file before using Presenter. If you have another solution that I might be able to keep in my back pocket (in case this happens again and what I did does not work), then please answer. Otherwise, I'm good now.
    Thanks!

  • I need to get raw plugin for Canon 5D Mark iii for CS6  the adobe website has changed and I can not find the download.. it keeps looping me back to the product download

    I need to get raw plugin for Canon 5D Mark iii for CS6  the adobe website has changed and I can not find the download.. it keeps looping me back to the product download page without the raw

    Which operating system are you using?
    Have you tried Help>Updates from within photoshop cs6 to get either camera raw 8.3 or 8.7.1, which should enable photoshop cs6 to open the canon 5D Mark III files.
    (version of camera raw depends on your operating system)
    If that doesn't work try one of the following camera raw plugin installers:
    Camera raw 8.7.1 plugin
    https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html
    If you have windows xp or vista or mac os x snow leopard (10.6.8), then you'll have to use the camera raw 8.3 plugin installer:
    https://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html

  • Could not complete the command because of a problem using the Adobe Colour Engine??

    When I am playing back a set of recorded actions, I receive a message that says "Could not complete the command because of a problem using the Adobe Colour Engine". This occurs after I copy a part of an image to paste it onto a new file. It occurs during the "Make" part(making a new file) and I was just wondering how to fix it.

    It's a known (but esoteric) bug in Photoshop CS5 and earlier, seen with grayscale images.  It used to crash utterly, but after I reported it I think they patched Photoshop 12.0.something to avoid the crash.  However, the step still fails when you make a new grayscale image in an action.
    I saw it because I created an action to paste the clipboard into new document, all in one motion.  It virtually always works as long as I have a colored image in the clipboard.  But not grayscale.
    One workaround, which is not particularly convenient, is to turn on prompting for the Make new image step.  I haven't used this workaround for a while, but it used to be that if you confirmed the "File New" operation manually it would continue and work.  I don't know if the workaround is still valid.
    -Noel

  • Hello, i have a problem with the adobe photoshop elements 10 in the organizer impossible to use the

    Hello, i have a problem with the adobe photoshop elements 10 in the organizer impossible to use the magic mouse, Where can I configure this one?
    Thank you.

    What do you mean by "impossible to use"? I use a magic mouse with PSE all the time. What are you wanting to do that isn't working?

  • Could not initialize photoshop because of a problem using the adobe color engine (Win 7)

    Was running the lastest version of Photoshop CS5 and added a second quad graphics card and 4 more monitors.  Now PS will not start and I get the error message "could not initialize photoshop because of a problem using the adobe color engine."
    Computer has 2 NIVDIA Quadro4 NVS420 graphics boards with 8 Samsung SyncMaster 1920x1080 monitors.  If I disable 4 of the monitors CS5 starts normally.  I do not have to remove the added graphics card.  When I extend the desktop again to all 8 monitors I get the error above.
    How do I trouble-shoot the problem?  Is it Photoshop, NIVDIA or Windows 7?

    Well, not exactly a full solution yet (at least for my setup), but I am certain now that this issue is (mostly) caused by nVidia's drivers. You may be able to fix your setup by simply installing the latest drivers for your NVS420 cards (266.45 for Win 7/64 rel. 01/12/2011).
    Since you are using two identical cards, this could do the trick.
    Caveats - Make sure you:
    1. Select Custom Install, the Express Install will most likely not work properly.
    2. Unselect the Audio Driver (if available), the nVidia HD(MI) Audio driver could
        screw up your speech recognition (if you use it) or other audio software - it did for me.
    3. Select Clean Install. If you don't, files like C:\Windows\System32\drivers\nvlddmkm.sys
        and several other driver related files will not be overwritten, causing all sorts of neat effects.
    4. After the Install is complete, reboot your system whether the Installer prompts you or not.
    After testing various configurations, disabling two - six of my eight monitors I am at this point:
    I am now using nVidia's lastest and greatest piece of crap (read driver), version 266.58, released just two days ago. After an initial snag with maximized windows extending to the bottom of the main monitor (underneath the taskbar), a re-install & reboot solved that issue.
    All three driver versions tested (260.89, 260.99, 266.58) now allow me to start PhotoShop without any problems; providing I first disable the two monitors fed by my onboard graphics (nVidia 780a based), leaving me with six monitors connected to three GTS-450 cards.  I can even re-enable the two other monitors once the program is open, and it continues to work fine. However, I must disconnect them again for the next start of PhotoShop.
    On an interesting side note:
    After disabling six monitors (leaving only two on a GTS-450), I was also able to open and run SoundBooth CS5, which previously would not open, citing the audio driver as the problem. After sucessfully starting SoundBooth I could re-enable all six other monitors (incl. onboards),
    and that program now opens and works fine with all 8 monitors connected. [ODD !!!]
    Other than Adobe Software, I've had only one other issue with my setup:
    When playing online poker at PokerStars, occasionally and quite randomly one of multiple tables would freeze up. I'll try disabling the two onboard monitors for that program as well to see whether the random freezes stop.
    Overall, while I think that Adobe produces fine software and nVidia has been in need of an overhaul for quite some time now, I also think that Adobe and nVidia software engineers need to work more closely together to ensure that problems like this don't arise in the first place after a product has been released to the public. IMHO, this is avoidable!
    PS:
    Here's a link to a great tool for multiple monitors, Display Fusion by Binary Fortress.
    I use the free version, it allows you to do cool things like have individual wallpapers for all
    your monitors, or stretch a single image across all monitors. With the Pro Version ($25),
    you can also add individually customizable taskbars to each monitor, and a lot more.
    http://www.displayfusion.com/

  • Satellite P500-12D - A problem with the cooling system has been detected

    hi there everyone,
    I have bought a Satellite P500-12D which was a retail return. When I start it up it runs a couple of mins and then this comes up on the screen:
    Warning: A problem with the cooling system has been detected. please turn off the computer immediately and return it for service.
    In the toshiba health monitor the cpu is under 50% temp and if it goes much above that the cooling fan comes on and lowers it back down and the fan stops again, I have noticed that only the r/h fan runs to cool the cpu, should both them come on together? Could it be a software problem?
    Tthe unit is new without even the plastic off the screen surround or webcam. Any help or even point me in the right direction would be very appreciated, gary

    The fact that the pc is a retail return would indicate that there was a fault at day one and the customer returned it. At some point the retailer turned it on and since it appeared to work re-sold it.
    This is the cooling/fan report from a P500 produced by pc wizard 2010 - free from cpuid.com. Perhaps a comparison against the faulty laptop will point to the problem
    <<< Voltage, Temperature and Fans >>>
    > Hardware Monitoring : National LM79
    > Voltage CPU : 1.02 V
    > +3.3V Voltage : 1.02 V
    > +5V Voltage : 0.43 V
    > +12V Voltage : 1.02 V
    > Chassis Fan : 42187 rpm
    > Power/Aux Fan : 21093 rpm
    > Processor Temperature : 64 C
    > Mainboard Temperature : 16 C
    > Hardware Monitoring : ACPI
    > Thermal Zone : 48 C
    > Processor :
    > Intel Mobile Core 2 Duo (Core 1) : 57 C
    > Intel Mobile Core 2 Duo (Core 2) : 58 C
    > NVIDIA GeForce GT 230M : nVidia Driver
    > GPU Temperature : 35 C
    > GPU Diode : 35 C
    > GPU Fan : 100.0%
    > Hard Disk Monitoring : S.M.A.R.T
    > Hard Disk TOSHIBA MK5055GSX (Assembly) : 38 C
    > Hard Disk TOSHIBA MK5055GSX (Assembly) : 27 C

  • I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

  • Could not complete the command because of a problem using the Adobe Color Engine

    Hi all
    This bizarrely started this morning - completely out of the blue - and I've no idea why.
    Setup: Mac 10.8.2 / Creative Suite Premium PhotoShop CS5 extended (patched to 12.04)
    Am working on images exported from LightRoom 4 (16bit A3 Pro Photo RGB PSDs) in PhotoShop CS5.
    As part of my image grading process I have a PhotoShop Action that does the following: copy layer to new document (document respects all of copied layer settings) > Image > Adjustments > HDR toning > apply a certain HDR preset > copy to resultant image back to original doc > set opacity as 40%.
    Totally out of the blue, after having this action for about 2 months, this morning I start getting a warning dialog of "Could not complete the command because of a problem using the Adobe Color Engine" and the action fails. The failure seems to take place at the 'make document' part of the action and seems to somehow be related to the contents of the clipboard.
    I've tried trashing and re-creating the action. It works first time out fine and then - on the next image - errors again.
    At present I can only safely carry out the work 'manually' by completing all the actions myself.
    I can think of no settings that have changed and the OS hasn't been updated in a while.
    I have found one other thread on a similar problem in PhotoShop Elements, but no definitive solution.
    Any help appreciated as I have a shedload of stuff to process.
    Best wishes
    TP

    OK: trash of prefs didn't work. Tried thrice. Re-created orig action. same problem.
    BUT!
    Your 'Image > Duplicate' suggestion does seem to work. If I use that in a new action as the method for creating the HDR version doc (instead of 'Select > Copy > New > Paste), it seems to work.
    Will try that out this afternoon, but for now: WIN!
    Many thanks for the suggestion!
    TP

  • A problem with the cooling system has been detected

    I bought a new computer not to long ago, I've had it for almost a month now. It runs fine, and I've had no problems until not too long ago. I was playing a game, and I got a random error message: "A problem with the cooling system has been detected. Please turn off the computer immdiately, and return it for service." I don't understand how or why this came up, and I don't have any money to return it for any type of repairs. After I got this message, I left my computer off for about an hour. All seems well so far. Any suggestions?

    What laptop do you have?
    - Peter

  • Problem with the crystal reports XI

    Portuguese
    Boa Tarde, tenho um problema com o cristal reports XI.
    ele esta em producao fazendo a consulta em um servidor mas quando eu acesso passando parametro connectionInfo.ServerName = <endereco do servidor> para um servidor de teste pelo VStudio 2005, ele nao busca os dados deste e continua acessando o servidor de producao.
    gostaria de saber como consertar isso
    English
    Good afternoon, I have a problem with the crystal reports XI. him this in production making the consultation in a servant but when I access passing parameter connectionInfo.ServerName =  I address of the servant > for a test servant for VStudio 2005, he doesn't look for the data of this and it continues accessing the production servant.

    Fabiano, here is what I understand of the issue:
    1) You are using CR XI (I am not sure if release 1 or release 2)
    2) you are using .NET 2005
    3) you are trying to change the server name, but the report keeps giving you data from the original server
    Please answer the following:
    1) Are you using CR XI release 1 or release 2?
    2) Can you change to the new server, using the Crystal Reports Designer?
    3) Can you duplicate the issue on your development computer?
    4) What Crystal Reports service pack are you on?
    5) Are you connecting to the database using OLE DB?
    Ludek

  • Hi, I recently got myself an apple iphone 5s (factory unlocked) phone from the US. However on using the same in India with Vodafone, i am facing a problem where the connectivity keeps switching to EDGE most of the time. Any solutions??

    Hi,
    I recently got myself an apple iphone 5s (factory unlocked) phone from the US. However on using the same in India with Vodafone, i am facing a problem where the connectivity keeps switching to EDGE most of the time. I have a 3G plan but most of the time it switches automatically to EDGE. Thats when i have to either switch Airplane mode - On/Off and then it acts normal. Any permanant solutions to fix this problem?

    Return the iPhone personally or via friend/relative/co-worker who is in
    the US. The warranty is valid only in the country of original purchase - the USA
    in this case. Apple will not accept international shipments for evaluation nor
    will Apple ship out of the country after repair/replacement.
    How did the iPhone from the US get to you in India? Reverse that process to
    get it back to the US so someone can take it into Apple.

Maybe you are looking for