Problem while activating table
Hi,
The system I am using was upgraded from 4.7 to ECC 6.0
I have a table ZABCD. When i try to activate this table, i get the following warning message
Enhancement category for table missing
Enhancement category for include or subtype missing
Table ZABCD was checked with warnings
Why is this happening? What should be done to remove this warning message
Thanks,
Prasy
Hi,
Go to EXTRAS---->enhancement category
Check the radiobutton can be enhanced deeply or as per your requirement.
Then activate it ,it will be activated.
Regards,
Raj.
Similar Messages
-
Problem while activating message mapping
Hi all,
I am facing a problem while activating message mapping in IR.It says Object being edited by XXXX and cannot be activated.It's giving my user name itself and even it doesn't allow to go to edit mode even.But I am not opening it twice.How to monitor all the XI users logged into the XI system and find the users using IR and ID objects.Please help in this regard.
Thanks.Hi Jaya
It is .....
http://<host:port>/rep/support/public/LockAdminService
Hope this helps !!!
Regards,
J Augastine -
Having problem while activating my product please help
having problem while activating the product
gifted,
Depending on your version, you may try a chat here or here:
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Serial number and activation support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service1.html -
BI7.0 Hexdecimal values problem while activating the data in DSO
Hi Friends,
I've got the data upto PSA and i've run DTP also from PSA to DSO, but while activating the data in DSO from New Data Table to Active Data Table, it's giving the error given below:
Error when assigning SID: Action VAL_SID_CONVERT table
0DOC_HD_TXT
Value '1st disb' (hex. '00310073007400200064006900730062') of characteristic 0DOC_HD_TXT contains invalid characters
Process 000037 returned with errors.
it isn't accepting the values like with numberels and chars together
ex: 1st disb, 70 cr Gen Hsg.
I want the same to be in the report, how these are to be allowed?, i don't want to edit in PSA and there are a lot of values like that i can't edit all those, since there are thousands of records.
Regards,
BalajiReddyHi Anil,
Thanx for your quick replay, i've allowed ',' in RSKC and i've checked the check box LOWER CASE LETTERS for IO 0DOC_HD_TXT, the problem was almost solved out. What does ',' mean by?
Why lower case letter has to be checked only for this IO (0DOC_HD_TXT), not for others? if it is checked, it allows only lower cases, doesn't allow upper cases i think. won't there be any problem? if it is done like that?
pls tell me the reason, i'm really thankfull for your quick replay
Regards,
BalajiReddy -
Activation problem while activating PRODHS
Dear Experts,
I have modified PRODHS structure by adding some more fields. While activating it is generating warning activation log, saying that there is inconsistencies in some of the other tables and some tables were adjusted and activated.
Rgds,
RajeshHi rajesh ,
Goto transaction SE14.
Give the table name.
Select the option Tables and press 'Edit' pushbutton.
It will take you to another screen.The processing type by default on the new screen will be 'Direct'.
In that screen select the last tab ' Activate and adjust database '.
Your problem will be solved.
Regards ,
Anuj -
Problem while Exporting Table Data to Excel Sheet
Hi All,
Im getting problem while downloading the table data to Excel.
Steps i was fallowed:
1)created Context node with four attributs.
2)created one attribut(resource) type: com.sap.ide.webdynpro.uielementdefinitions.Resource
3)Taken one Filedownload UI and Property resource bounded to (resource)
4)Added required jar file in the library and copied the same jar file in the navigator lib file
written the necessary coding but showing the below problem in the Browser
You must Flush before accessing the resource content
Please give me any suggestion on this
Regards
PolakaHi
Check this might help with Brian Fernandes comments.
Flush?
Regards
Arun Jaiswal -
Problems while activating ABAP proxy
Hi All,
I am dealing with a problem while I am trying to activate a proxy in Sproxy tcode
Package Check for Table/Structure ZDT_ENVIO_DADOS_MESTRES_IN
The object TABL ZDT_ENVIO_DADOS_MESTRES_IN uses TTYP PRXCTRLTAB
Table Type PRXCTRLTAB
Package ZBW does not have sufficient use access
Does someone could help me on how to fix that ?
Regards
DiegoHi Diego,
Add SAI_TOOLS under Use access.
Check the below link for more info.
http://help.sap.com/saphelp_nw04/helpdata/en/ea/c05da0f01011d3964000a0c94260a5/content.htm
Thanks, -
Problem While Activating Transformation
Hi BW Gurus,
I am currently working on BW 7.0 on Purchasing Area, I found some problem while modifying the transformation or activating the transformation. I have mapped the data source 2LIS_02_SCL Purchasing Data (Schedule Line Level). I have written a routine for mapping rules of 0ORDER_VAL base on the source field of BWVORG, BWAPPLNM, BWEFFWR, BEDAT, WAERS, HWAER, WKURS. And it shows no error while syntax check. But while activating the Transformation it leads to dump. And after that if I try to change the routine, it leads me to the same dump.
Please advice.
For reference, find the code what I wrote in the routine below,
IF ( SOURCE_FIELDS-BWVORG = '001' or SOURCE_FIELDS-BWVORG = '011'
or SOURCE_FIELDS-BWVORG = '021' or SOURCE_FIELDS-BWVORG = '004'
or SOURCE_FIELDS-BWVORG = '014' or SOURCE_FIELDS-BWVORG = '024' )
AND SOURCE_FIELDS-BWAPPLNM EQ 'MM'
AND SOURCE_FIELDS-BWEFFWR 0.
PERFORM LOC_CURR_CONVERT
USING SOURCE_FIELDS-BWEFFWR
SOURCE_FIELDS-BEDAT
SOURCE_FIELDS-WAERS
SOURCE_FIELDS-HWAER
SOURCE_FIELDS-WKURS
CHANGING RESULT.
ENDIF.
where the LOC_CURR_CONVERT is given below
FORM LOC_CURR_CONVERT *
--> LC_DOCUMENT_VALUE *
--> LC_DATE *
--> LC_DOCUMENT_CURRENCY *
--> LC_LOCAL_CURRENCYY *
--> LC_RATE *
LC_LOCAL_VALUE *
FORM loc_curr_convert
USING lc_document_value
lc_date
lc_document_currency
value(lc_local_currency)
lc_rate
CHANGING lc_local_value.
conversion of lc_rate from floating-point to decimal. Necessary for *
call of CONVERT_TO_LOCAL_CURRENCY.
data lc_rate_dec type p decimals 5.
lc_rate_dec = lc_rate.
IF lc_document_currency = lc_local_currency
no conversion necessary -> Main case 1
AND NOT ( lc_document_currency IS INITIAL
OR lc_local_currency IS INITIAL ) .
lc_local_value = lc_document_value.
ELSEIF NOT ( lc_document_currency IS INITIAL
OR lc_local_currency IS INITIAL OR lc_date IS INITIAL ) .
conversion necessary with lc_date -> Normally not possible
CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
EXPORTING
date = lc_date
foreign_amount = lc_document_value
foreign_currency = lc_document_currency
local_currency = lc_local_currency
rate = lc_rate_dec
IMPORTING
EXCHANGE_RATE =
local_amount = lc_local_value
EXCEPTIONS
NO_RATE_FOUND = 1
OVERFLOW = 2
NO_FACTORS_FOUND = 3
NO_SPREAD_FOUND = 4
DERIVED_2_TIMES = 5.
IF sy-subrc NE 0.
message a802 with lc_date lc_document_currency lc_local_currency
sy-subrc.
ENDIF.
ELSE.
if conversion not possible -> assign target values
lc_local_value = lc_document_value.
lc_local_currency = lc_document_currency.
ENDIF.
ENDFORM.
Thnaks
Regards,
Deep.Hi,
Please check routine if any for 0CO_REPLINE and also expert routine.
Regards,
Rema. -
RFC problem while activating the new ODS...
Hi Experts,
I have created a new ODS, while activating that it is giving bellow error message,
RFC ERROR IN THE SOURCE SYSTEM.
but I have checked with my basis team, everything is fine,
What would be the problem.
helpful answer will be appreciated with points,
Thanks in advance,
Venkat.hi all,
iam even getting the same error and unable to solve this.please provide me solution with step wise process.iam getting the below error:
Message no. RSBM035
Diagnosis
The system could not create DataSource .
System Response
The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
Procedure
Consult the appropriate developer (function module: RSA1_OLTPSOURCE_GENERATE).
thanks®ards
Vamshi -
Problem while activating Custom Include
Hi,
My requirement is to make a copy of standard include (V50R_ON_OUTPUT) into ZV50R_ON_OUTPUT.
And to add this custom include in another copy of the main program ZRVV50R10C (copied from RVV50R10C).
But am facing problem when activating the custom main program ZRVV50R10C.
Can anyone faced similar issue(as it contains many enhancements, may be the cause)?
Pls help!
Thanks!
SangarHi Thomas,
Thanks for ur response.
I totally understood the upgrade issue, but unfortunately that's my need now.
The issue am facing is when activating it getting error as "Data not defined". like ( t_prof1 = %_p_prof1_%_app_%-text.) of the statndard include.
do i need to add anything in declaration part also?
Thanks!
-sangar -
Problem while creating Table control with wizard
Hi All,
I am using the table control wizard.
Following is the declared data :
TYPES: BEGIN OF test_str,
name TYPE string,
city TYPE string,
END OF test_str.
DATA: lt_str TYPE STANDARD TABLE OF test_str,
ls_str TYPE test_str.
I activated the program after declaring this..
then I created a screen.
while generating the table control , i give the internal table name as lt_str and work area as ls_str(both of these are also coming in F4 help) , i am getting the following error :
the table work area ls_str does not exist or is not a structure.
Please help.
Regards
PanneerHI Selvam
In the wizard please choose the radio button internal program table. I hope you might have choosen the dictonary table.
And activate the program before generating the wizard.
Please try this and let me know if any issues.
Thanks
Praveen
Edited by: Praveen Kumar on Feb 4, 2010 4:34 AM -
Debugger problem while activating Datasource in BW 7.4 Sysytem
Hi All.
I am getting very strange problem on BI 7.4. Whenever I try to activate datasource, I get the debugger launched up in a separate window. I have to manually Step Over the code (F6) each time for about 2-3 minutes. Then on the original window, I get message that Datasource is activated.
However the second debug window is still open with an hourglass. I have to manually STOP TRANSACTION and close that window.
If I dont Step Over the code then my datasource does not get activated so I have to do this step.
What could be causing this frustrating problem. Is there a way to disable this debugger..Hi Ram,
Thanks for your inputs.
still my problem not resolved. Not only data source even if I tried to activate transformation, DTP which installed from BI content & custom DTP also getting same problem.
This is not upgraded one, as freshly installed BW 7.4 and couple of hours before only established RFC connection b/w ECC & BW dev systems.
As per this version all BI content components were installed by basis team. -
Problem while populating table dynamically
Hi,
I am facing a strange problem when I execute a search component (custom developed component).
<b>Problem summary:</b>
I am getting first 5 empty rows (default visible row count, when I set the table's visible row count to "n" then the data in the first "n" rows are not visible) from the SAP R/3 when we fetch the data using this component. The data is available for the next consecutive rows starting 6th {(n+1)th} row. Here I am facing another strange behavior, I moved the table row position using the table paginator and viewing the data in the next consecutive rows and reset the view (invalidating the context and setting the visibility of the table to NONE), when I invoke the search again the data is missing in the 6-10 rows(the table data is paginated to the 6-10 records automatically), now the data is visible in the first 5 rows.
<b>The details of softwares:</b>
SAP WebAS 6.40 SP9
SAP NetWeaver Developer Studio Version: 2.0.9
JDK version - j2sdk1.4.2_06
<i>Note:</i>
1. The table creation and data population are done dynamically.
2. The same code works fine for SAP WebAS 6.40 SP8
3. When I tried fetching some data from SAP R/3 and displaying it in a table (table is created during design time and data population is achieved through standard context binding), it works fine.
If any of you get any clue in solving this issue, please do let me know.
Thanks in advance.
Thanks & Regards,
Santhosh.CHi Thomas,
I am running the application from the NDS and the URL look like the below URL
http://<<machine_name>>:50000/webdynpro/dispatcher/sap.com/parentgenericsearchhelpcomponent/PerentSearchDemo?SAPtestId=1
I am using IE6.0 SP2
Yes the application is working fine in SP8 and giving problem in SP9.
I have a parent component which calls another component(childcomponent), which has this dynamically populated table. I am using window.open() to open the window in the child component.
To answer your last question,
I don't see full of empty rows, I see empty rows for the first visble row counts(5 or 10, if the total fetched row count might atleast 1 more than the visble row count). The data is available from the first visible row count+1. If I come back and see the first vible row count, still the rows are blank.
Thanks & Regards,
Santhosh.C -
Problem while importing table with blob datatype
hi i am having a database 9i on windows xp and dev database 9i on AIX 5.2
while i am taking export of normal tables and trying to import i am successful.but when i am trying to import a table with blob datatype it is throwing "tablespace <tablespace_name> doesn't exist" error
here how i followed.
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Oct 8 14:08:29 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Enter user-name: test@test
Enter password: ****
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL> create table x(photo blob);
Table created.
exporting:
D:\>exp file=x.dmp log=x.log tables='TEST.X'
Export: Release 9.2.0.1.0 - Production on Mon Oct 8 14:09:40 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Username: pavan@test
Password:
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
Current user changed to TEST
. . exporting table X 0 rows exported
Export terminated successfully without warnings.
importing:
D:\>imp file=x.dmp log=ximp.log fromuser='TEST' touser='IBT' tables='X'
Import: Release 9.2.0.1.0 - Production on Mon Oct 8 14:10:42 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Username: system@mch
Password:
Connected to: Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Oracle Data Mining op
tions
JServer Release 9.2.0.6.0 - Production
Export file created by EXPORT:V09.02.00 via conventional path
Warning: the objects were exported by PAVAN, not by you
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
import server uses US7ASCII character set (possible charset conversion)
. importing TEST's objects into IBT
IMP-00017: following statement failed with ORACLE error 959:
"CREATE TABLE "X" ("PHOTO" BLOB) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS "
"255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1) TABLESPACE "TESTTB"
"S" LOGGING NOCOMPRESS LOB ("PHOTO") STORE AS (TABLESPACE "TESTTBS" ENABLE "
"STORAGE IN ROW CHUNK 8192 PCTVERSION 10 NOCACHE STORAGE(INITIAL 65536 FREE"
"LISTS 1 FREELIST GROUPS 1))"
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'TESTTBS' does not exist
Import terminated successfully with warnings.
why it is happening for this table alone?plz help me
thanks in advanceHere is exerpt from {
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:378418239571}
=============================================
Hi Tom,
I have a dump file containing blob datatypes, when i import the dump file in a schema it gives an
error stating that the tablespace for Blob datatype does not exists. My question is how do i import
the dump file in the default tablespace of the importing user.
Followup March 2, 2004 - 7am US/Eastern:
You'll have to precreate the table.
do this:
imp userid=u/p tables=that_table indexfile=that_table.sql
edit that_table.sql, fix up the tablespace references to be whatever you want to be, run that sql.
then imp with ignore=y
for any MULTI-SEGMENT object (iot's with overflows, tables with lobs, partitioned tables, for
example), you have to do this -- imp will not rewrite ALL of the tablespaces in that
multi-tablespace create -- hence you either need to have the same tablespaces in place or precreate
the object with the proper tablespaces.
Only for single tablespace segments will imp rewrite the create to go into the default if the
requested tablespace does not exist.
===================================================
To summarize: precreate target table when importing multi-segment tables -
Debugger problem while activating Datasource..
Hi All.
I am getting very strange problem on BI 7.0. Whenever I try to activate datasource, transformation, DTP or Replicate metadata, I get the debugger launched up in a separate window. I have to manually Step Over the code (F6) each time for about 2-3 minutes. Then on the original window, I get message that Datasource is activated.
However the second debug window is still open with an hourglass. I have to manually STOP TRANSACTION and close that window.
If I dont Step Over the code then my datasource does not get activated so I have to do this step.
What could be causing this frustrating problem. Is there a way to disable this debugger..Hi Phunet,
Just wondering ..
Is that any debugging command there ?
If yes, i think you need to remove that command ..
Hopefully it can help you a lot .
Regards,
Niel
thanks for the points you choose to assign.
Maybe you are looking for
-
Creative Cloud Desktop App in English
Hi all, I don't know if this was solved before and I've been looking for a solution but didn't found a clue. My CC desktop app is installed in to my mac but everything is displayed in english and it should be in Spanish. When I install any app (Photo
-
Lenovo Edge 15" laptop running Windows 7 (64 bit) and using Thinkvantage Password Manager Ver 3.20.0330 and TouchStrip Fingerprint Sensor (UPEK). The password manager is to set to restrict logins to websites to fingerprint but when logging into websi
-
SSI Status Number Range (0-9)
Hi, In J1ID at vendor excise details u can find SSI Status. in the dropdown there is valid number range 0 to 9. There is no description about this number ranges. Can anyone please let us know that what this 0 to 9 means individually? Plz guide...
-
When I am creatin an internal order. I can create an internal order and then release it without going to KO02 to change. Is this possible to just NOT to release an internal order... after just creating it. Basic requirement is KO01 should just create
-
sorry about my english. i'm working with large xml file which it data like this (this is sample data) <DOCTYPE lewis SYSTEM "lewis.dtd"> <REUTERS TOPICS="NO" LEWISSPLIT="TEST" CGISPLIT="TRAINING-SET" OLDID="20436" NEWID="21001"> <DATE>19-OCT-1987 15: