Problem while adding a new dimension in a existing cube with data in BW3.5

Hi,
We are trying to create a new dimension with new characteristics in a existing cube. But while activating we are getting error that "InfoCube contains data; intentional changes not permitted". Can we add a new dimension in a existing cube with data in BW3.5? If it is not possible then we can take the backup and delete the data from cube and then change the cube. But my question is that, when we will transport the cube with changes to quality then will it transport successfully or same procedure needs to be done there as well.
Regards,
Saikat

hi,
Adding new infoobject /dimension to the cube containing data in 3.5 is not possible.
easier solution is create a new cube similar to old and add the new dimension and proceed.
else you have to drop data and transport.
Ramesh

Similar Messages

  • Adding New Dimension In An Existing Cube (Block)

    Hi fellows,
    Im not an expert so need you feedback.
    I am supporting a cube that was built a decade ago using Essbase 6.5. It has 7 dimensions (3 dense, 4 sparse). With the new reporting requirement, I need to add a new dimension to be called "BaseTimePeriod" that seems like a Time dimension but will show the "Constant Dollar" amount calcuation for difference Scenarios.
    Since the cube has been there for so long, and the expert that has pioneered that cube is no longer in the company. All of our reports uses API being called in MS Excel to retrieve data from the cube and format it the way the users wanted it to be. As well as 75% of our data are user input using the Essbase Excel Add-in, "lock/send" commands.
    My problem now is that, since I need to introduce another dimension for the "Constant Dollar" calculation, is there any way that if I add a new dimension the existing process of uploading data by the users as well as retrieving data through Excel API will not be affected?
    I tried to add new dimension in the R&D server that we have when I try to retrieve historical data from the cube in the Excel since there is "BaseTimePeriod" dimension before, the Excel report layout gets affected and inserts a new row placing "BaseTimePeriod" in that cell since this not yet there before. And when I try to upload data through Excel Add-in "lock/send" action, it did allow me unless I put a member from the "BaseTimePeriod" to complete the dimension member combination.
    My questions now are:
    1) How can I add a new dimension without impact from the historical data?
    2) Is there any way to place a default value for the new dimension for the historical data so it would complete the dimension member combination, so whenever I retrieve and upload data there will be no problem?
    Any insights related to this questions is highly appreciated. Thanks!
    obelisk

    If you add the new dimension to a cube that already has data, you should get a prompt when you save the outline to associate the existing data with a member from the new dimension. You will then go into a dense restructure which could take a while, depending on the size of your database. Another option would be to export your data in column format and load it into a relational table in something like SQL or Access, you can then add the new dimension to the export in the relational tool, export it back out to a text file and use a load rule to reload it.
    As far as the lock & send and existing reports, in most cases, adding a new dim will result in all of those needing to be updated. This is why we try not to add new dims to existing cubes, especially ones that have been around a while.
    Another thing to consider is the impact of adding a new dim. I don't know the size of your existing database, but you are going to increase it by adding a new dim and things like consolidation time and retrievals can be impacted, so you need to test all of this.
    You should evaluate why you need a new dim and determine if you can achieve the same result without adding a new dim. While a new dim might be the preference in a new cube design, when dealing with something that has been around a while you might want to be creative and somewhat more compromising if it is the lesser of two evils. If everyone is committed to a rebuild then go ahead and rebuild especially if it's been around a while, there are probably other things that can stand to be cleaned up as well, but if nobody wants to deal with that, then look to see if you can get their without adding a new dim, perhaps a new roll up in a existing dim or an attribute dim. A more thorough explanation of what the business case is would help to provide an alternate solution.

  • Addine New Dimension In An Existing Cube

    Hi fellows,
    Im not an expert so need you feedback.
    I am supporting a cube that was built a decade ago using Essbase 6.5. It has 7 dimensions (3 dense, 4 sparse). With the new reporting requirement, I need to add a new dimension to be called "BaseTimePeriod" that seems like a Time dimension but will show the "Constant Dollar" amount calcuation for difference Scenarios.
    Since the cube has been there for so long, and the expert that has pioneered that cube is no longer in the company. All of our reports uses API being called in MS Excel to retrieve data from the cube and format it the way the users wanted it to be. As well as 75% of our data are user input using the Essbase Excel Add-in, "lock/send" commands.
    My problem now is that, since I need to introduce another dimension for the "Constant Dollar" calculation, is there any way that if I add a new dimension the existing process of uploading data by the users as well as retrieving data through Excel API will not be affected?
    I tried to add new dimension in the R&D server that we have when I try to retrieve historical data from the cube in the Excel since there is "BaseTimePeriod" dimension before, the Excel report layout gets affected and inserts a new row placing "BaseTimePeriod" in that cell since this not yet there before. And when I try to upload data through Excel Add-in "lock/send" action, it did allow me unless I put a member from the "BaseTimePeriod" to complete the dimension member combination.
    My questions now are:
    1) How can I add a new dimension without impact from the historical data?
    2) Is there any way to place a default value for the new dimension for the historical data so it would complete the dimension member combination, so whenever I retrieve and upload data there will be no problem?
    Any insights related to this questions is highly appreciated. Thanks!
    obelisk

    I tried to add new dimension in the R&D server that
    we have when I try to retrieve historical data from
    the cube in the Excel since there is "BaseTimePeriod"
    dimension before, the Excel report layout gets
    affected and inserts a new row placing
    "BaseTimePeriod" in that cell since this not yet
    there before. And when I try to upload data through
    Excel Add-in "lock/send" action, it did allow me
    unless I put a member from the "BaseTimePeriod" to
    complete the dimension member combination.Essbase must have all (non-attribute) dimensions represented for any data operation to happen. If you think about it, each cell of data represents the intersection of exactly 1 member from each dimension and, behind the scenes, the storage mechanisms are focused on optimizing those relationships. Thus, you can see how the BaseTimePeriod member got added to your retrieve as Essbase didn't know which member from BaseTimePeriod you wanted and made the assumption that you wanted the dimension level member. If you place that dimension level member into your retrieve range (along side any of the other "page" (i.e. filter) fields, the retrieve will not insert a row. The insertion of the row can be extremely hazardous as it pushes the other rows down by one; your end users may be making decisions that effect the existence of your company based on formulas reading those cells and, effectively, the formulas may be referencing data from the wrong row..
    My questions now are:
    1) How can I add a new dimension without impact from
    the historical data?Although my forte is not cube design (I work mostly with frontends to Essbase), most situations I have seen when this happens the historical data is assigned a distinct member within the new dimension (assuming you aren't going to go back and reload the data from the sources and map the data based on the new dimension's values in the dataset.
    2) Is there any way to place a default value for the
    new dimension for the historical data so it would
    complete the dimension member combination, so
    whenever I retrieve and upload data there will be no
    problem?As stated above, put a member from the dimension, most likely the dimension member itself, into the existing Excel templates.
    Good Luck!
    Tim Tow
    Applied OLAP, Inc

  • How to cretae new dimension in an existing cube in BI7

    HI BI Gurus
    Could you please let  me know  that is it possible to add a new Dimension in a BI 7 infocube using the Remodelling tool . The cube name is 0TCT_C21 and the dim table is /BI0/D0TCT_C212 . I want to redefine the  existing Dim table and want to remove the char
    Process Instance (SID) (0TCTINSTSID) and want to create another new dim whic will be a line Item dim and will ad dthe char as Line item char . because the DIm/Fact ratio is 96% in the cube .  The chars are in the existing dimension is BW System,Process Chain ID,Process Chain LOG ID,Process Type,Process Variant,Object Version .
    Please let me know your view and also is it possible to chage the dimension and add new dimension ?
    Regards
    Saptarshi

    Hi
    This is not possible through remodelling. Please see this http://help.sap.com/erp2005_ehp_04/helpdata/EN/9b/0bc041f123c717e10000000a155106/frameset.htm.
    For your requirement , you will have to delete the data and make changes to the existing flow. But you should take care of all the issues that might come up with this changes.
    Cheers
    Chanda

  • Problem while adding a new row to the table.

    hello,
    In my ADF form i have a table. and when i click on CreateInsert it add a new to the table but at the first. i want all the new rows to be added at the end of the table in a sequence. how can i do this?....
    Thanks and Regards,
    Rakshitha

    Hi,
    Try this:
    DCIteratorBinding dciter;
    BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
    dciter = (DCIteratorBinding) bindings.get("findAllTestAndryIter");
    ViewObjectImpl vo = dciter.getViewObject();
    if (vo != null)
    Row row = vo.createRow();
    int rangeSize = vo.getRangeSize();
    int rowsInRange = vo.getAllRowsInRange().length;
    int insertPos = rowsInRange < rangeSize? rowsInRange: rangeSize - 1;
    vo.insertRowAtRangeIndex(insertPos, row);
    vo.setCurrentRow(row);
    }

  • Problem while adding a new data source for the demo for mapviewer...

    hello,
    i use oracle 10g enterprise edition. i imported the necessary dump files and get the necessary scripts worked. i want to see the demo results in mapviewer. for that, i have to add a datasource. the XML code in order to realize this purpose is:
    <?xml version="1.0" standalone="yes"?>
    <non_map_request>
    <add_data_source
    name="mvdemo"
    jdbc_host="c-0y5wp0jvd2bf8"
    jdbc_port="1521"
    jdbc_sid="mvdemo"
    jdbc_user="!mvdemo"
    jdbc_password="tiger"
    jdbc_mode="thin"
    number_of_mappers="3" />
    </non_map_request>
    i press the submit button. then it wants me to enter a username and password. the default is admin/welcome. then i see this result on the browser:
    This XML file does not appear to have any style information associated with it. The document tree is shown below.
         <oms_error>
    Message:[MapperConfig] eşleme verileri kaynağı eklenemiyor.
    Sat Feb 26 02:29:19 EET 2005
    Severity: 0
    Description:
         at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.java:583)
         at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.java:315)
         at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
         at oracle.lbs.mapserver.oms.doPost(oms.java:409)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:534)
    </oms_error>
    by the way, the error message on the application server screen:
    05/02/26 02:29:16 INFO [oracle.lbs.mapserver.MapServerImpl] adding a map data sr
    c [name=mvdemo]
    05/02/26 02:29:18 WARN [oracle.sdovis.ds.nods] java.sql.SQLException: G/╟ istisn
    as²: The Network Adapter could not establish the connection
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :137)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :174)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :286)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:321)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
    414)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:149)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtensio
    n.java:31)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:551)
    at java.sql.DriverManager.getConnection(DriverManager.java:512)
    at java.sql.DriverManager.getConnection(DriverManager.java:171)
    at oracle.sdovis.ds.NativeOracleDataSource.<init>(NativeOracleDataSource
    .java:120)
    at oracle.sdovis.ds.DSManager.registerOracleJdbcDS(DSManager.java:86)
    at oracle.lbs.mapserver.core.MapperConfig.createMappers(MapperConfig.jav
    a:613)
    at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.
    java:582)
    at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.jav
    a:315)
    at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
    at oracle.lbs.mapserver.oms.doPost(oms.java:409)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
    stDispatcher.java:810)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
    vletRequestDispatcher.java:322)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
    tHandler.java:790)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
    va:270)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
    va:112)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
    sableResourcePooledExecutor.java:186)
    at java.lang.Thread.run(Thread.java:534)
    05/02/26 02:29:18 WARN [oracle.sdovis.ds.nods] connecting to database using jdbc
    thin driver...
    05/02/26 02:29:19 ERROR [oracle.sdovis.ds.nods] java.sql.SQLException: G/╟ istis
    nas²: The Network Adapter could not establish the connection
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :137)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :174)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :286)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:321)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
    414)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:149)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtensio
    n.java:31)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:551)
    at java.sql.DriverManager.getConnection(DriverManager.java:512)
    at java.sql.DriverManager.getConnection(DriverManager.java:171)
    at oracle.sdovis.ds.NativeOracleDataSource.<init>(NativeOracleDataSource
    .java:136)
    at oracle.sdovis.ds.DSManager.registerOracleJdbcDS(DSManager.java:86)
    at oracle.lbs.mapserver.core.MapperConfig.createMappers(MapperConfig.jav
    a:613)
    at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.
    java:582)
    at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.jav
    a:315)
    at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
    at oracle.lbs.mapserver.oms.doPost(oms.java:409)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
    stDispatcher.java:810)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
    vletRequestDispatcher.java:322)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
    tHandler.java:790)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
    va:270)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
    va:112)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
    sableResourcePooledExecutor.java:186)
    at java.lang.Thread.run(Thread.java:534)
    05/02/26 02:29:19 ERROR [oracle.sdovis.ds.nods] java.sql.SQLException: G/╟ istis
    nas²: The Network Adapter could not establish the connection
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :137)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :174)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
    :286)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:321)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
    414)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:149)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtensio
    n.java:31)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:551)
    at java.sql.DriverManager.getConnection(DriverManager.java:512)
    at java.sql.DriverManager.getConnection(DriverManager.java:171)
    at oracle.sdovis.ds.NativeOracleDataSource.<init>(NativeOracleDataSource
    .java:136)
    at oracle.sdovis.ds.DSManager.registerOracleJdbcDS(DSManager.java:86)
    at oracle.lbs.mapserver.core.MapperConfig.createMappers(MapperConfig.jav
    a:613)
    at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.
    java:582)
    at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.jav
    a:315)
    at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
    at oracle.lbs.mapserver.oms.doPost(oms.java:409)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
    stDispatcher.java:810)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
    vletRequestDispatcher.java:322)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
    tHandler.java:790)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
    va:270)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
    va:112)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
    sableResourcePooledExecutor.java:186)
    at java.lang.Thread.run(Thread.java:534)
    05/02/26 02:29:19 ERROR [oracle.lbs.mapserver.core.MapperConfig] java.lang.Illeg
    alArgumentException: Error creating NativeOracleDataSource.
    at oracle.sdovis.ds.NativeOracleDataSource.<init>(NativeOracleDataSource
    .java:196)
    at oracle.sdovis.ds.DSManager.registerOracleJdbcDS(DSManager.java:86)
    at oracle.lbs.mapserver.core.MapperConfig.createMappers(MapperConfig.jav
    a:613)
    at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.
    java:582)
    at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.jav
    a:315)
    at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
    at oracle.lbs.mapserver.oms.doPost(oms.java:409)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
    stDispatcher.java:810)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
    vletRequestDispatcher.java:322)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
    tHandler.java:790)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
    va:270)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
    va:112)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
    sableResourcePooledExecutor.java:186)
    at java.lang.Thread.run(Thread.java:534)
    if someone could help about what to do, i would be grateful..

    when defining a data source through the admin web page, don't add '!' in front of the password.
    ! is needed only when configuring a data source in the mapViewerConfig.xml file.

  • Problem while adding a new field to a Z-table

    My attributes are mater table with maintenance allowed and taken APPl0 as data class.
    Now i am trying to add another field to this table and it says you have no authorizations in the log.
    I checked in SU53, actiity is 42 there...
    how can i no wether i have authorizations 2 chg a table or not?if this is the case, it should pop-up a msg when we go for a chg mode itself.. right???
    any clues guyz what shud i do?
    regds
    kiran

    Hi,
    Do u want to know about the authorization means go to table maintenance generator first.
    Now get the authorization object of your table.
    Goto transaction SU21.
    List of object class will be displayed.
    Double click the object class BC_A.
    Now a list of object will be displayed.
    Double click the object S_TABU_DIS (Table Maintenance)
    U will find wat all fields used in tht, ACTVT is the field which specifies the activities of ur table.
    Reward mark if this is useful.
    Ram.

  • Problem while adding a new data file

    Hi
    I add a data file into an existing tablespace. It created data file and did not give any error message.
    But in the live system, we gets errors:
    ORA-01157: cannot identify/lock data file 12 - see DBWR trace file
    ORA-01110: data file 12: 'D:\ORACLE\PRODUCT\10.2.0\.....ms5 ORA-06512: at line 1
    what is the problem

    user4030266 wrote:
    Yes I wonder it also. I do not have an access to their system where db exists. I am a developer.
    But When I look at toad, I see that some percent of the datafile is full and it is not online. I think it achieved to write to datafile before but now it gives errors. it is very strangeYou are a developer and you are allowed to make changes on the production system? Do you not have a DBA in house?
    Get your DBA to look into this matter at the earliest.

  • Create new dimension on top of SAP BW data

    Hi expert,
    I'm having a problem to create a new dimension on top on SAP BW data. I have a dimension details object called 'L01 G/L Account Key'. When I drag this object to the result object in the web intelligence, it display full data like '1000/30100'. How can I trim the data so it shows '30100'?.Is there any formula that support in universe?
    I don't want to do the formula inside the web intelligence report because I want to use this dimension to other reports as well.
    Please expert....help me!
    Thanks & Regards,
    Syahida-

    Hi,
    SAP BW MDX does not support calculations that return string or date: this is a limitation of SAP BW OLAP engine.
    By the way I found exceptions that satisfy your requirement.
    For instance you can manipulate a substring of a dimension only with NAME and UNIQUENAME attributes.
    Example, you can use these expressions:
    <EXPRESSION>right([OD_COUNTRY].currentmember.name, 4)</EXPRESSION>
    <EXPRESSION>right([OD_COUNTRY].currentmember.uniquename, 4)</EXPRESSION>
    <EXPRESSION>left([OD_COUNTRY].currentmember.name, 4)</EXPRESSION>
    <EXPRESSION>left([OD_COUNTRY].currentmember.uniquename, 4)</EXPRESSION>
    <EXPRESSION>mid([OD_COUNTRY].currentmember.uniquename, 2,4)</EXPRESSION>
    Regards
    Didier

  • "This form cannot be opened in a web browser. to open this form use microsoft infopath" while adding a new Approval - Sharepoint 2010 and Publishing Approval workflow.

    I am trying to add a new workflow to a document library with the below mentioned settings and getting error saying "This form cannot be opened in a web browser. to open this form use microsoft infopath" while adding a new Approval - Sharepoint
    2010 and  Publishing Approval workflow" . For your information the I have checked the server default option to open in browser.
    Versioning Settings.
    Error
    This is quiet urgent issue . Any help would be really helpful.. Thanks.. 

    Hi Marlene,
    Thank you very much for your suggestions.
    But I am not creating a custom workflow in designer as Laura has mentioned. I am instead trying to create a new Out of the box Approval Workflow and I get the error mentioned above.
    As it works in other environment, I tried figuring out the possible differences which can lead to this error.
    Today I found one difference which is there are no form Templates within Infopath Configurations in Central Admin. Now I am trying to figure out what makes this form templates to be added to the template gallery.
    Regards,
    Vineeth

  • Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

    Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
    1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
    2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
    Appreciate for any help rendered.

    Mikko777 wrote:So what is the best?
    I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
    What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
    Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
    Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
    Mikko777 wrote:PS:You produce a lot of text and welcome smile
    Yeah. Wonder why I'm still employed? So do I ...

  • Can we see Mobile phone number instead of home fax as the first option while adding a new number in iPhone 5s?

    Hello,
    While adding a new phone number in Iphone 5S, when you hit 'add phone', it displays the phone number types in this sequence - home fax, radio, home and then mobile. Is there a way to configure this sequence to see mobile as the very first option? i save only mobile numbers and dont see much use in home fax and other options. I know we can delete other phone number types, but i want to save few cliks for convinience
    Thanks...

    When you add a new phone number, I think you are talking about the Contacts app.
    Click "home fax" in that display that comes up.  You should be able to change it to something else; e.g., home.
    Then home would come up first.

  • Bold 9000: problem while adding email address to TO:

    Hi Guys!!
    I am facing a problem while adding email addresses (whcih are already stored in my BB Bold 9000). while adding "To: or CC:" only 1 email stored contact is displayed. others are not.
    please help me some solution.
    regards
    Thanks & regards
    Ajay Jain

    If I understand you correctly, while adding email addresses to any particular email IDs you're can't see multiple email IDs. Email addresses are stored under the contact names. You can save multiple email address under one contact. Now while putting name in To/CC field you should be typing the names of the contact and when pressing/selecting names you would be prompted with multiple email addresses.
    Try this -
    When you device is POWERED ON, remove the battery for a minute, and then reinsert the battery. This make a reboot to your device which minor issues with the BlackBerry device.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Adding new infoobject to cube with data

    Hi experts
    Our cube contains data and is fully compressed (E-table), there is are no requests in F-table.
    We need to add 2 key figures and 2 characteristics.
    The characteristics get a new dimension table.
    We don't use the remodel technique. We add these new infoobjects.
    There is no need for a reload of historical data for these new objects.
    We only need data starting from the first load date after the changes occured.
    Are there any errors in this approach?
    Thanks

    Thomas,
    When you are adding a new dimension to your cube - you are adding a primary key to your E and F Fact tables - therefore when your transport goes it - it will reorganize your cube tables.
    For this - assuming that you are collecting the changes in the normal way and not changing any settings ....
    1. Check the UNDO table space in target system , the UNDO table space should have enought free space available that will be greater than the size of your E and F Fact table sizes - because , the way the transport moves is that a copy of the table is taken in the undo table space in the database and then the tables are adjusted - if your undo table space is insufficient - the transport will fail after some time
    2. If this is a big cube - then the transport will take time to go in - if BASIS imports transport requests in sequence - then this transport will hold the queue and might delay others whi have smaller transports.... make sure that your transport goes in last if there are others waiting for you to complete
    3. Also inform BASIS that the transport is going to take time - sometimes long running transports can get the BASIS team excited :-)
    These are not technical but some bases that can be covered in advance...
    Hope this helps.,...

  • When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder?

    When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!

    I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
    If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
    Please continue reading about bookmarks and some related extensions at
    * http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
    * https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
    * http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
    * http://dmcritchie.mvps.org/firefox/kws.htm
    If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension.

Maybe you are looking for

  • Loading large files in Java Swing GUI

    Hello Everyone! I am trying to load large files(more then 70 MB of xml text) in a Java Swing GUI. I tried several approaches, 1)Byte based loading whith a loop similar to pane.setText("");              InputStream file_reader = new BufferedInputStrea

  • My iTunes won't open in Windows 7!

    I have tried uninstalling and re-installing iTunes several times with no luck.  At this point I am getting a User Permission request from Apple but it goes no further than that.  I've had messages about the compatibility mode and have checked and un-

  • Timeline Scroll Driving Me Crazy!

    Does anyone know if you can lock the timeline video and/or audio window panes to prevent them from scrolling out of view? When I drag and drop video from the Viewer, as I drag the clip down, the timeline (v1 and v2) slip below the lower window pane o

  • PowerMac AGP G4 and Wireless N ?

    HI, I have a AGP G4 that i would like to use as a backup server at home. is it possible to add wireless N to it either via PCI or USB? Thanks

  • Problem with Adobe Muse & Business Catalyst publishing

    I am unable to publish my site on Adobe Business Catalyst via Muse.  The error in Muse is "Unknown Error" in the dialogue box "Upgrade to Adobe ID".  I have already tried deactivating and reactivating Muse.  I have also tried signing into Business Ca