Problem while applying notes

friends,
we are in the process of applying notes prescribed by SAP to reflect budget 2007-08..but when generating the view for j_1iqexcise, i get the following msg. "J_1IQEXCISE-MATNR is shortened to 0009'...where i have gone wrong? when i tried again to generate using table maintenance generator, it says "Function group J1I_TABLE_MAINT cannot be processed"...can anyone shed some light on this? thanks all
cheers,
Sathish. R

hi
the length is 18 only in the table...it says that matnr will become a rollable field of length of 9...am not able to generate the view now...as we have to go in a sequential manner in applying the set of notes, without finishing this, we can't proceed to the next...awaiting your inputs...
Sathish. R

Similar Messages

Modification problems while applying SAP Note manually

Hi Guys,
I am facing some problems while applying a SAP note manually (it cannot be applied without manual changes).
There is one standard program which I am trying to change for this purpose, but it does not allow me to do so saying "Carry out modification comparison for REPS RPCT8AR1_01 first. No changes possible" !!
Now I can go to SPAU and reset the object, but it will lose all its changes which was done
by 2 SAP notes previously.
How can I apply my SAP Note without reverting the changes ? If I revert the changes, I lose
the changes for other 2 notes !!
Is there a solution for this? please help asap.
Many thanks in advance,
Sandip.

If you did not modified the program manually, you dont have to worry. implement your note from SNOTE transaction.
even if you loose previous modifications, you can always get them back by going SPAU transaction and import the transport numbers.
I had the same problem but we had manual changes to the program that is why didnt allow to implement note

I'm facing problem while applying OSS Note 1046758

Hi gurus,
I'm facing problem while applying OSS Note 1046758. That note is asking to create J_1IEWT_ACKN_N table.
After creating the table I went to the UTILITIES menu => TABLE MAINTENANCE GENERATOR.
Then OSS Note 1046758 is asking us to give the function group name as J_1IEFILE.
Next Choose One Step.
and then Find Screen Numbers.
While clicking the CREATE button it is not allowing me to assign the function group group J_1IEFILE.
How to overcome this problem.
Very urgent.
Any answers are welcome and will be rewarded .
Regards,
Jacob Charles S.

Hi Sheeba,
I have applied the follwoing notes.
1046758 -- To display acknowledgement number in Form No 16A
 558469
 983795
 498087
 912767
 773171
 891923 -- 452805 (Correction Made)
905220 -- Blank Values for TDS, Surcharge & Ecess in new certificate
 923216
 833092
984623 -- J1INCERT:Consolidated Issues - SEP 2006
Eventhough I'm not getting the those values in the respective fields.
I mean, TDS Rate, ECESS Rate and CHENCK NUMBER.
More over, I want the FROM 16A should contain the Higher Education CESS field with values.
any notes has to be applied apart from this or what....
Wht are the table I have to maintain for this in SM30.
Kindly help me... It's urgent...
Regards,
Jacob Charles S.

Query designing problem while applying cell properties

Hello Experts,
I have a problem while designing query. Problem is as follow:
I have a calculated field on key figure column. This key figure calculates variance between 2 columns.
for E.g I have 2 columns Budget and Actual and third column is %Variance which should be
1. ((Actual - Budget)/Budget) *100 or
2. ((Budget -Actual)/Budget)*100, depening on some values on the row i should use any of these 2 formulas but the result should be dispalyed in single column % Variance.
how can i change the formula in key figures depending on these conditions. I can achieve this by applying cells but i dont want to do so as it is very complex way to desing these queries.
also let me know applying cells on query affects its performance or not?
Regards,
Nirav

Hi Nitin,
Your reply may help me.
But my exact requirement is not that. Requirement is as follow:
I have created Char. Structure in row which contains few rows as revenue and few rows as expense.
I created them by creating selections. Now in case of expense the variance should be (Budget-Actual)/Budget *100.
In case of revenue variance should be (Actual-Budget)/Budget *100.
So, here i have to find out revenue & expense char. iresspective of which one is greater.
Regards,
Nirav

Problem while applying configuration to SCE 8000 using SCE-API

We are facing an issue while applying service configuration to SCE 8000 device using SCE API supplied by CISCO.
We have sample .pqb file which we are using to upload to SCE 8000. We are using 3.5.5 version of firmware on SCE.
Attached is exception file which contains sample .pqb and trace log that we see when we apply configuration. Please note, that we are using RHEL5 platform, JDK 1.5.0_1 and standalone java program to apply configuration on SCE using API
com.pcube.management.common.InvocationException: null ### java.lang.NullPointerException java.lang.NullPointerException
         at com.pcube.management.framework.fsmanager.RFileInputStream.close(RFileInputStream.java:240)
         at java.io.BufferedInputStream.close(BufferedInputStream.java:440)
         at com.pcube.apps.engage.management.Utilities.copyDeviceToLocalRMI(Utilities.java:357)
         at com.pcube.apps.engage.policy.ConfigurationRetriever.retrievePolicy(ConfigurationRetriever.java:85)
         at com.pcube.apps.engage.policy.Test.fetchPpUpgradeVersion(Test.java:15)
         at com.elitecore.pm.SCEConfiguration.main(SCEConfiguration.java:460)
com.pcube.management.common.InvocationException: null ### java.lang.NullPointerException java.lang.NullPointerException
failed to fetch current pp upgrade version listjava.lang.NullPointerException0.0.0 PP0com.pcube.apps.engage.common.ApplyException: Client version 3.5.5 PP20 is different than SCE version 0.0.0 PP0, therefore apply is not allowed
        at com.pcube.apps.engage.policy.SEPolicyMediator.checkPpVersion(SEPolicyMediator.java:335)
         at com.pcube.apps.engage.policy.SEPolicyMediator.applyPolicy(SEPolicyMediator.java:114)
         at com.pcube.apps.engage.policy.SEPolicyMediator.applyPolicy(SEPolicyMediator.java:95)
         at com.elitecore.pm.SCEConfiguration.main(SCEConfiguration.java:461)
com.pcube.management.common.InvocationException: null ### java.lang.NullPointerException java.lang.NullPointerException
         at com.pcube.management.framework.fsmanager.RFileInputStream.close(RFileInputStream.java:240)
         at java.io.BufferedInputStream.close(BufferedInputStream.java:440)
         at com.pcube.apps.engage.management.Utilities.copyDeviceToLocalRMI(Utilities.java:357)
         at com.pcube.apps.engage.policy.ConfigurationRetriever.retrievePolicy(ConfigurationRetriever.java:85)
         at com.pcube.apps.engage.policy.Test.fetchPpUpgradeVersion(Test.java:15)
         at com.elitecore.pm.SCEConfiguration.main(SCEConfiguration.java:460)
com.pcube.apps.engage.common.ApplyException: Client version 3.5.5 PP20 is different than SCE version 0.0.0 PP0, therefore apply is not allowed
        at com.pcube.apps.engage.policy.SEPolicyMediator.checkPpVersion(SEPolicyMediator.java:335)
         at com.pcube.apps.engage.policy.SEPolicyMediator.applyPolicy(SEPolicyMediator.java:114)
         at com.pcube.apps.engage.policy.SEPolicyMediator.applyPolicy(SEPolicyMediator.java:95)
         at com.elitecore.pm.SCEConfiguration.main(SCEConfiguration.java:461)

You are likely hitting CSCtb94072.
The policy file should be manipulated by development engineer.
Please open a case with TAC and ask the CSE to fix the policy (by getting development engineer assistance).
Once you have the fixed policy PQB file perform the following CLI procedure on all SCEs on which the problem was observed:
SCE2000>enable
Password:
SCE2000#cd engage
SCE2000#delete MYENGAGE.PQB
SCE2000#rename MYENGAG1.PQB MYENGAGE.PQB
SCE2000#
Once done you should be able to apply the fixed policy without any issue.
Note: after performing the above CLI procedure, you can also successfully retrieve the policy,
however, you must avoid doing it since the retrieved poilcy would not be the last applied one, it would be the penultimate one which you probably don't want to use.
After applying the fixed policy, you should be able to retrieve policy successfully with no fear.
====
This is more of a clarification regarding the workaround procedure:
To get you better understand the issue.
The last policy applied to the SCE successfully is kept under the SCE "/engage" directory by the name MYENGAGE.PQB
The penultimate applied policy is also kept there under the name MYENGAG1.PQB
When the SCA-BB GUI applies a policy it first verifies the matching SCA-BB and PP version by inspecting this MYENGAGE.PQB file.
If the file has the corruption dealt in this defect, the apply will fail with the message of the kind:
"Client version 3.5.5 PP18 is different than SCE version 0.0.0 PP0, therefore apply is not allowed"
The MYENGAG1.PQB is the penultimate applied policy and it's not corrupted, renaming it MYENGAGE.PQB will assure us that the apply operation won't fail when verifying the versions are matched.
Alternatively (for the renaming procedure) user may copy the fixed policy file into the SCE disk space under /engage directory and name it MYENGAGE.PQB, then the apply should also work fine.

Problems while applying Manifest Patch on Linux - 11.5.10 CU2

Hi,
We're migrating our Application Tier (11.5.10 CU2) from HP-UX 11.23 to Linux RedHat 5 (32 Bits).
While applying Manifest Patch , I've got the the following Error Messages :
Starting link of rg executable 'RGSSRQ' on Wed Jan 12 16:21:41 IST 2011
gcc -s -L/nerp/release11i/ora_top/8.0.6/lib -L/nerp/release11i/ora_top/8.0.6/lib/stubs -ldl -o /nerp/release11i/appl_top/rg/11.5.0/bin/RGSSRQ /nerp/release11i/appl_top/rg/11.5.0/lib/rgssrq.o \
/nerp/release11i/appl_top/rg/11.5.0/lib/librg.a /nerp/release11i/appl_top/fnd/11.5.0/lib/libfnd.a /nerp/release11i/appl_top/gl/11.5.0/lib/libgl.a -lsql /nerp/release11i/ora_top/8.0.6/lib/nautab.o /nerp/release11i/ora_top/8.0.6/lib/naeet.o /nerp/release11i/ora_top/8.0.6/lib/naect.o /nerp/release11i/ora_top/8.0.6/lib/naedhs.o `cat /nerp/release11i/ora_top/8.0.6/lib/naldflgs` -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /nerp/release11i/ora_top/8.0.6/lib/sysliblist` -ldl -lpthread -lm /nerp/release11i/ora_top/8.0.6/rdbms/lib/defopt.o /nerp/release11i/ora_top/8.0.6/rdbms/lib/ssbbded.o
/usr/lib/gcc/i386-redhat-linux/4.1.2/../../../crt1.o: In function `_start':
(.text+0xc): undefined reference to `__libc_csu_fini'
/usr/lib/gcc/i386-redhat-linux/4.1.2/../../../crt1.o: In function `_start':
(.text+0x11): undefined reference to `__libc_csu_init'
collect2: ld returned 1 exit status
make: *** [nerp/release11i/appl_top/rg/11.5.0/bin/RGSSRQ] Error 1
Done with link of rg executable 'RGSSRQ' on Wed Jan 12 16:21:41 IST 2011
Relink of module "RGSSRQ" failed.
-> All the binaries have not been compiled/generated.
Thank's for your help !

Hi,
I've checked all the Rpms and Kernel Versions : OK.
I ran an Rda for 11.5.10 CU2 , and I received the following Errors :
Default Action
Result: FAILED
Value: G++Elsewhere
LdElsewhere
Some of the required software tools for the the application tier of Oracle E-Business Suite Release 11i (11.5.10.2) installation were not found.
Check your installation.
Return Value Action
ArNotFound ar is not found in PATH.
ArElsewhere ar is not in /usr/bin as required.
GccNotFound gcc is not found in PATH.
GccElsewhere gcc is not in /usr/bin as required.
G++NotFound g++ is not found in PATH. <====
G++Elsewhere g++ is not in /usr/bin as required.
KshNotFound ksh is not found in PATH.
LdNotFound ld is not found in PATH.
LdElsewhere ld is not in /usr/bin as required. <====
MakeNotFound make is not found in PATH.
MakeElsewhere make is not in /usr/bin as required. Please note that ld and g++ are located in /usr/bin so i don't know if to trust this rda output :
which ld
/usr/bin/ld
which g++
/usr/bin/g++
And the Path is:
echo $PATH
/usr/bin:/nerp/release11i/ora_top/8.0.6/bin:/nerp/release11i/appl_top/fnd/11.5.0/bin:/nerp/release11i/appl_top/ad/11.5.0/bin:/usr/java/jdk1.6.0_23/bin:/nerp/release11i/comm_top/util/unzip/unzip/unzip-5.50::/nerp/release11i/ora_top/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/opt/java1.3/bin:/opt/ansic/bin:/opt/java1.3/bin

Problem while implementing note 1034868 for MAM 3.0

Hi,
I have another problem implementing this note. As described in that note at point no. 3. I'm not able to activate text elements for "RALM_ME_EQUI_FULL_DOWNLOAD_SD".
I receive an error "Error during activation" --> Message no. EU837
I've looked for it but found nothing. Any idea?
Thank you!
Regards,
Florian

Hi Martin,
as we work with the standard SAP function module, we have restored first the last active version for the texts because there was a inconsistence, which we have found under the debugging and next the texts were activated successfully without this inconsistency.
I hope this helps a bit.
Regards,
Florian

Problem while applying BP02 for OIM 11.1.1.5.0

We have OIM-OAM integrated environment enabled with ldapsynch (OID/OVD). We are applying BP02 for OIM 11.1.1.5.0. We followed all the steps provided in the read me doc.
1. Running latest Opatch
2. Setting the environement variables
3. Configuring Weblogic.profile
4. Applying SOA patch 13106312
5. Applied OIM patch 13399365
6. Running patch_weblogic.sh
But while doing the 6th step "Running patch_weblogic.sh" we are facing below exception.
patch:
[echo] unzipping the archives.....
explode-archived-apps:
[delete] Deleting directory /FS2/oracle/apps/MWHOME/Oracle_IDM1/server/apps/oim.ear
[delete] Deleting directory /FS2/oracle/apps/MWHOME/Oracle_IDM1/server/apps/Nexaweb.ear
[mkdir] Created dir: /FS2/oracle/apps/MWHOME/Oracle_IDM1/server/apps/oim.ear
[mkdir] Created dir: /FS2/oracle/apps/MWHOME/Oracle_IDM1/server/apps/Nexaweb.ear
[unzip] Expanding: /FS2/oracle/apps/MWHOME/Oracle_IDM1/server/patching/oim.ear into /FS2/oracle/apps/MWHOME/Oracle_IDM1/server/apps/oim.ear
[unzip] Expanding: /FS2/oracle/apps/MWHOME/Oracle_IDM1/server/patching/Nexaweb.ear into /FS2/oracle/apps/MWHOME/Oracle_IDM1/server/apps/Nexaweb.ear
[echo] archives unzipped successfully.....
[echo] seeding the out of the box jobs into db
seed-ootb-jobs:
seed-ootb-jobs:
[echo] ----> SEEDING OUT OF THE BOX SCHEDULE JOBS AND TRIGGERS
[java] Feb 9, 2012 1:00:26 PM org.quartz.core.QuartzScheduler <init>
[java] INFO: Quartz Scheduler v.1.6.0 created.
[java] Feb 9, 2012 1:00:27 PM org.quartz.impl.jdbcjobstore.JobStoreSupport initialize
[java] INFO: Using thread monitor-based data access locking (synchronization).
[java] Exception in thread "Main Thread" java.lang.Exception: Unable to seed scheduler data due to configuration problems. Contact System Administrator
[java] at oracle.iam.scheduler.seed.SeedSchedulerData.startSeeding(SeedSchedulerData.java:770)
[java] at oracle.iam.scheduler.seed.SeedSchedulerData.main(SeedSchedulerData.java:113)
As it is one of high priority task Can any one help by providing your inputs at earliest ?

Hello All,
Still we haven't able to resolve this issue. We already have SR with oracle. So many logs were captured.
Below is the snippet of seedSchedulerdata.log
${work.dir}Entered Validate methodExiting Validate method------------------------------------------------------------
Start seeding task
job name--> Password Expiration Task
schTaskName--> Password Expiration Task
task class name--> com.thortech.xl.schedule.tasks.tcTskPasswordExpiration
task job disable--> 0
task frequency--> DAILY
task maxRetries--> 5
task retryCount--> 0
task paramName--> Email Definition Name
task paramValue--> Password Expired
task paramTpe--> String
Updating Job :Password Expiration Task with keys
java.lang.Exception: Unable to seed scheduler data due to configuration problems. Contact System Administrator
 at oracle.iam.scheduler.seed.SeedSchedulerData.startSeeding(SeedSchedulerData.java:770)
 at oracle.iam.scheduler.seed.SeedSchedulerData.main(SeedSchedulerData.java:113)
If any of them faced such issue please help.
Thanks
DK

Problem while applying service packs

Hi All,
We installes SAP ERP 6.0 SR3 ABAP+JAVA(Central instance).
We are trying to import SAP_BASIS service packs from SP13 to SP14, SP15....
we started import through spam in the down status it is showing 'CMDIMPORT finished with returncode 0'
We opened MMC and checked work processsers
ALL DIA showing
Program SAPMSSY1 client 001 User PILDUSER Time 7000
SP) showing
Program 'job activation' client 000 User SAPSYS Action Update Table TSPOPTIONS
How to resolve this issue ?
How to find the problem?
What are the logs i have to check?
SPAM got Struck?
Regards,
Phanikumar.

Hi,
The avilable drive space is 82GB.
Tell me how to check the table and archive space.
developer trace for one of the work processor dev_w09
trc file: "dev_w9", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 04
M sid ECC
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 236
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 3588
M
M
M Fri Apr 09 10:34:15 2010
M kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 9 3588) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Fri Apr 09 10:34:16 2010
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000FA00050, size: 6614144)
M DpShMCreate: allocated sys_adm at 000000000FA00050
M DpShMCreate: allocated wp_adm at 000000000FA02270
M DpShMCreate: allocated tm_adm_list at 000000000FA096D0
M DpShMCreate: allocated tm_adm at 000000000FA09730
M DpShMCreate: allocated wp_ca_adm at 000000000FFACFB0
M DpShMCreate: allocated appc_ca_adm at 000000000FFB2DB0
M DpShMCreate: allocated comm_adm at 000000000FFB4CF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001003B980
M DpShMCreate: allocated gw_adm at 000000001003BA00
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000001003BA30
M DpShMCreate: allocated wall_adm at 000000001003BA40
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 9 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M ThInit: running on host ecc6
M
M Fri Apr 09 10:34:17 2010
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\ECC\DVEBMGS04\exe\dboraslib.dll' ...
B Library 'F:\usr\sap\ECC\DVEBMGS04\exe\dboraslib.dll' loaded
B
B Fri Apr 09 10:34:18 2010
B Version of 'F:\usr\sap\ECC\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.234)
B New connection 0 created
C Prepending F:\usr\sap\ECC\DVEBMGS04\exe to Path.
C
C Fri Apr 09 10:34:19 2010
C Oracle Client Version: '10.2.0.4.0'
C application info callback registered
C
C Fri Apr 09 10:34:20 2010
C Client NLS setting (OCINlsGetInfo): connection handle 0 -> 'AMERICAN_AMERICA.UTF8'
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ECC on connection 0 (nls_hdl 0) ... (dbsl 700 251109)
C Nls CharacterSet NationalCharSet EnvHp ErrHp ErrHpBatch
C 0 UTF8 0000000012720080 0000000012727BD0 0000000012738328
C Attaching to DB Server ECC (con_hdl=0,svchp=00000000127381E8,srvhp=000000001273B238)
C
C Fri Apr 09 10:34:21 2010
C Starting user session: OCISessionBegin(con_hdl=0, usr='/',svchp=00000000127381E8, srvhp=000000001273B238, usrhp=00000000127931C0)
C
C Fri Apr 09 10:34:22 2010
C CbApplInfoGet() failed (ignored 1).
C Now '/@ECC' is connected: con_hdl=0, nls_hdl=0, session_id=1054.
C
C Fri Apr 09 10:34:23 2010
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=00000000127381E8,usrhp=00000000127931C0)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@ECC on connection 0 (nls_hdl 0) ... (dbsl 700 251109)
C Nls CharacterSet NationalCharSet EnvHp ErrHp ErrHpBatch
C 0 UTF8 0000000012720080 0000000012727BD0 0000000012738328
C Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR3/<pwd>, svchp=00000000127381E8, srvhp=000000001273B238, usrhp=00000000127931C0)
C Now 'SAPSR3/<pwd>@ECC' is connected: con_hdl=0, nls_hdl=0, session_id=1077.
C Database NLS settings in V$NLS_PARAMETERS: AMERICAN_AMERICA.UTF8
C
C Fri Apr 09 10:34:24 2010
C DB instance ECC is running on ECC6 with ORACLE version 10.2.0.4.0 since APR 09, 2010, 10:30:44
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20100409 103418 ECC6
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif,*.png
I
I Fri Apr 09 10:35:49 2010
I MtxInit: 9 0 0
M SHM_PRES_BUF (addr: 0000000014010050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFDDA80050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000014450050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001C460050, size: 2760892)
M SHM_PAGING_ADM (addr: 00000000091D0050, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0000000009700050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 00000000003E0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 9 initializing ....
X Using implementation view
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M Deactivate statistics hyper index locking
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 000000001C7A00E0, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 000000001C7A0330, size: 320072)
B dbntab: Buffer FTAB(item array) (addr: 000000001C7EE580, size: 1280000)
B dbntab: Buffer FTAB(data area) (addr: 000000001C926D80, size: 30720000)
B dbntab: Buffer IREC(hash header) (addr: 000000001E6800E0, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 000000001E680330, size: 320072)
B dbntab: Buffer IREC(item array) (addr: 000000001E6CE580, size: 320000)
B dbntab: Buffer IREC(data area) (addr: 000000001E71C780, size: 6144000)
B dbntab: Buffer STAB(hash header) (addr: 000000001ED000E0, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 000000001ED00330, size: 320072)
B dbntab: Buffer STAB(item array) (addr: 000000001ED4E580, size: 320000)
B dbntab: Buffer STAB(data area) (addr: 000000001ED9C780, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 000000001F0900E0, size: 2360)
B dbntab: Buffer TTAB(anchor array) (addr: 000000001F090A20, size: 320072)
B dbntab: Buffer TTAB(item array) (addr: 000000001F0DEC70, size: 800000)
B dbntab: Buffer TTAB(data area) (addr: 000000001F1A2170, size: 5840000)
B db_con_shm_ini: WP_ID = 9, WP_CNT = 17, CON_ID = -1
B dbstat: TABSTAT buffer attached (addr: 000000001F74D0B0)
B dbtbxbuf: Buffer TABL (addr: 0000000022250160, size: 30000000, end: 0000000023EEC4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000023EF0160, size: 10240000, end: 00000000248B4160)
B dbexpbuf: Buffer EIBUF (addr: 00000000248C0170, size: 4194304, end: 0000000024CC0170)
B dbexpbuf: Buffer ESM (addr: 0000000024CD0170, size: 4194304, end: 00000000250D0170)
B dbexpbuf: Buffer CUA (addr: 00000000250E0170, size: 3072000, end: 00000000253CE170)
B dbexpbuf: Buffer OTR (addr: 00000000253D0170, size: 4194304, end: 00000000257D0170)
B dbcalbuf: Buffer CALE (addr: 00000000257E0050, size: 500000, end: 000000002585A170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
Please check and give me the solution.
Regards,
Phanikumar.

Photosmart 3210 has paper-input-problem while networking, not while USB is used.

Hi guys and girls,
My problem is as followed:
My photosmart 3210 works super, but when I use it to print something over my (W)LAN the paper gets stuck before it can get printed. When I do the same with the same file and the same program using the USB connection, there is no problem at all.
My network setup is a Thomson router, my printer is connected to the router via a utp-cable and my laptop (Win7/Compaq, WinVista/Acer) is connected to the router via Wifi.
Question: What can I do to solve this problem?
I've already installed updates and patches on my laptops, but I guess the problem might be in the firmware or the router.
For as far as I know the problem shouldn't be driver-wise or on the laptop-side, but I'm not 100% sure.
Thanks
Xander

Does it happen on the same file, or on all files? Will a one page document print both USB and Ethernet?
I was an HP employee.
Kudos are appreciated if I have helped you.

Facing problem while applying Enhancement packages 3

Hi
We are applying the ENHP 3, it was strucked at the phase DDIC_ACTIVATION please advice,
here the error
Error in phase: DDIC_ACTIVATION
Reason for error: TP_STEP_FAILURE
Return code: 0008
Error message: OCS Package SAPK-60301INEAAPPL, tp step A, return
code 0008
Cheers
Gopal Rao

You have to check the logs
in transaction SAINT:
Goto - Import Logs - Installation queue
Markus

While applying SAPKA70013 patch we are facing add on_ conflict issue

Import phase 'ADDON_CONFLICTS_?' (12.02.2009, 19:50:55)
There are conflicts between OCS Packages and Add-ons...
we have applied SAPK-40007INCPRXRPM to SAPK-40013INCPRXRPM ..
but still we are facing same problem........

Hi,
I am facing same problem while applying Support Pack SAPKA70013.
"Conflicts Between Add-On CRMUIF 600 and Support Packages"
Component Release Support Package Information on Conflict Resolution
SAP_ABA 700 SAPKA70013 Include CRT
What can I do. Help me!
Regards,
Darshan..

Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************

Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support

WSR not found while apply leave in ESS

Dear SAP Gurus,
We changed the holiday calendar for some PSA.
In the new calendar, some of the unused WSR for the PSA is removed.
(e.g. Remove a Shop WSR in a Office PSA with Office Calendar)
In this change, we find that some personnel have wrong WSR, so we corrected the personnel records too.
(e.g. A office staff with shop WSR)
After this change there are a few records with WSRwhich do not exists in the current holiday calendar setting, but all of them are in the pass.
(e.g. The Shop WSR, becuase it is the Office Calendar)
But we found that some of these staff will have a error because ESS try to locate the removed WSR while apply leave in ESS, but most of them do not have problem at all.
I think for some reason ESS need to access the WSR in the pass, but I am not sure what it is and I have no right to check the live personnel data too.
So, I would like to know what's the possible cause, so I can tell the user to check.
Thanks in advance.
Regards
Bill

Hi Vamshi,
Thanks for the reply.
Already generate the WSR for the new holiday calendar.
I think the problem is for some reason, ESS required to access the old WSR which do not exists in the new holiday calendar, but I don't know how to find this out because I have no right to read the personnel data in the production environment.
Regards
Bill

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Have you checked out the topics at the right in the More Like This section?
OT

Problem while applying notes

Similar Messages

Maybe you are looking for