Problem while capturing- auto creating clips

Hi-
I'm capturing in FCP 6 and it's creating a series of clips with random lengths. I don't believe that this is due to timecode breaks because some of the clips are only a few seconds in length. What's going on?How do I turn this off?
Thanks
Robert

This happens when you start and stop the camera, review the footage, and then stop AFTER PICUTRE STOPS...thus causing a break in the image and timecode, so the camera starts over. If you want continuous code, when you review the footage, stop BEFORE picture ends, the camera will pick up where it left off.
Shane

Similar Messages

Audio problems while capturing

In FCE4, I am capturing 8mm tape from an old camera, I use DV converter in the easy setup, and have no problem capturing footage. Except when i drag the clip onto the timeline, when I playback there is no audio output. I have my volume up on my laptop, and the waveforms are showing on the timeline in audible setting. Even the audio bars to the right are registering audio but nothing is coming out of the speakers during playback. Can anyone help me? I'm sure it's a switch somewhere I need to change. Thanks for your time.

Try View>Video Out>Canvas Playback.
Al

Facing problem while capturing error messages in ME51N

Hi Experts,
In ME51N transaction, we have included custom fields and tried to capture Error messages by building ex_message.
Below is the code that we used:
         loop at tb_error into wa_error.
            wa_message-type   = WA_ERROR-TYPE.
            wa_message-id     = c_zpr.
            wa_message-number = '007'.
             wa_message-message    = wa_error-message.
          wa_message-message_v1 = WA_ERROR-MESSAGE.
            wa_message-message_v2 = wa_eban1-bnfpo.
            APPEND WA_MESSAGE TO EX_MESSAGES.
            CLEAR WA_ERROR.
          endloop.
In my message class we have not hardcoded the messages because we need to capture dynamic messages(In message class it is 007: & & ). For that we have passed message text in wa_message-message.
But when Check button is selected, we are not the desired error message.
But if we pass the same message in Message_v1, we are getting the error message but it is getting truncated as the size is small when compared to Message field.
Waiting for your response.
Thanks & Regards,
Amarnath

Looks like configuration prob.
Have you tried jms examples of weblogic ? you may need to re-configure your server setup, to create example server.

Problem while cancelling the create Trasaction

Hi ,
When I am creating a new record and clicking on cancel Form Validation Failure waring is coming for the required field items.
What exactly Iam missng when calling the Cancel Button.
Below is the CO and AM code used when clicking on Cancel.
// In CO PFR
if (pageContext.getParameter("Cancel") != null)
          TransactionUnitHelper.endTransactionUnit(pageContext, "createTxn");
      am.invokeMethod("rollbackRecord");
          pageContext.forwardImmediately("OA.jsp?page=/xxapl/oracle/apps/oe/shipping/webui/SearchPG",
                                         null,
                                         OAWebBeanConstants.KEEP_MENU_CONTEXT,
                                         null,
                                         null,
                                         true, // retain AM
                                         OAWebBeanConstants.ADD_BREAD_CRUMB_NO);
//   In AM RollBack Method
public void rollbackRecord()
     Transaction txn = getTransaction();
         // This small optimization ensures that we don't perform a rollback
           // if we don't have to.
           if(txn.isDirty())
            txn.rollback();
     } Please guide me why this is not working to rollback the transaction.
Krishna

Hi,
Small property settings missed for the cancel Button.
Disable Server Side Validations & Disable Client Side Validations to trueKrishna

Problem while capturing keys from keyboard .

hello abapers,
i am trying to catch my enter key from keyboard coz i want run some code when user will press enter.
i think sy-ucomm will capture the key pressed, if i am wrong then plz correct me.
(1) with this assumption i tried running bdc for my screen and tried to get the bdc_okcode value which is /00
i passed this value to sy-ucomm in my abap prog but it didnt worked
(2) i tried writting /h in command window it oppend the debugging window but the value for sy-ucomm was blank
if any one of you is able to correct me it would be of great help to me plz its .....
Thank you.
Edited by: Dakshaini A Subramaniam on May 15, 2011 8:36 AM
Edited by: Rob Burbank on May 15, 2011 4:21 PM

Hi ,
Double click your ,
SET PF-STATUS 'STATUS'.
code. At Standard Toolbar part of the pf-status , set OK CODE for first item (green) to 'ENTER'.
When user hits enter , sy-ucomm will be ENTER.
This is for screen processing .

Problem in capturing excse invoice

Hi,
I am facing a problem while capturing excise invoice. I made goods receipt with reference to a single PO containing 3 line items by 101 mvt type. after that i reversed that document using mvt 102 for line item 2 and 3. Now the Original GR document contains only line item 1.
But while capturing Excise invoice with reference to the GR docuumber, system is showing message Document 9000005126 does not contain any selectable items.
Please suggest me how to capture excise invoices in the above scenerios.
Thanks
Prasant,

Prasant,
U said u have made 102 GR cancellation.While doing 102 mov type system will cancel whole document not 2 & 3 document.
So check whether this happened or not.
Thats why there is message of No selectable items.
Thanks & regards
Gitesh

Error message of Excise invoice has no matchin lines while capturing excise

hi CIN gurus
I ma facing a problem Whil capturing excise at depot. error message appearing as Excise invocie no matching lines.
This problem occurs even after entering appropriate internal number in J1IG.
And this problem is occuring randomly .
This occurs for STOCK TRANSFERS FROM DEPOT TO DEPOT.
CAN ANYONE COME OUT WITH SUGGESTION
rgds
BJ

Hi,
Refer to SNote Note 1382678 - Pop-up to select Excise Invoice in J1IH/J1IIN cancellation.
Symptom
While cancelling outbound Excise Invoice through the transaction J1IH or J1IIN, system always picks up the first excise invoice even when multiple excise invoices are present with same excise number and year.
Regards,

Problems while defining EJB relations for container managed bean

I am having a problem while trying to create my relations for my container managed bean.
My Database schema is:
Order table
order_id
message
WorkItem table:
order_id
item_id
message
I have defined my OrderBean to have:
@LocalMethod()
@CmrField
public abstract Collection getCmWorkItemsCmr();
@LocalMethod()
public abstract void setCmWorkItemsCmr(Collection workItems);
I am not sure how to define my relation for my class:
@Relation(cmrField = "cmWorkItemsCmr", multiplicity = Relation.Multiplicity.MANY, name = "Orders-CmWorkItems")
An order can have many workitems. I am not sure how to fill in the rest for foreign Key jointable and such.
Any help pointing me in the right direction would be helpful.
Thanks,
Ian

I am having a problem while trying to create my relations for my container managed bean.
My Database schema is:
Order table
order_id
message
WorkItem table:
order_id
item_id
message
I have defined my OrderBean to have:
@LocalMethod()
@CmrField
public abstract Collection getCmWorkItemsCmr();
@LocalMethod()
public abstract void setCmWorkItemsCmr(Collection workItems);
I am not sure how to define my relation for my class:
@Relation(cmrField = "cmWorkItemsCmr", multiplicity = Relation.Multiplicity.MANY, name = "Orders-CmWorkItems")
An order can have many workitems. I am not sure how to fill in the rest for foreign Key jointable and such.
Any help pointing me in the right direction would be helpful.
Thanks,
Ian

I'm having problems with a message that says: An error occurred while Attempting to create the directory: C:/program files/itunes/cd configuarion

I know this is a long story, but I'll be damned if I'm not going to get the most specific help I can (as Apple seems to specialize in assuming user error for all its demonic software). I've never had issues with iTunes before (barring a "Connect to iTunes" snafu with my iPod Touch) -- and never, in fact, with Windows Vista, if you believe that -- but this is the most bizarre thing I've seen.
I recently downloaded the new iTunes v 9.0.3 as I am occasionally prompted to do whenever a new version comes out, and immediately I had problems. Access to the iTunes and Quicktime folders was mysteriously denied after the update, and after several hours of frustration, I was able to grant my own Administrative access to these two folders and installation went through. Thank God.
Then I bought some music. No problems -- downloaded just fine, along with a copy of Cinderella Man and the new episode of Smallville. Life was good for a few days.
Then I connected my iPod Touch to the computer. All of a sudden, Microsoft Windows informs me that the "Apple Mobile Device Service stopped working and was closed," with subtext, "A problem caused the application to stop working correctly. Windows will notify you if a solution is available."
Bullsh*t Windows can help me with anything from Apple.
So I've tried to get iTunes to work with me on this. I've come up against the infamous "iTunes could not connect to this iPhone because an unknown error occurred (OxE8000001)" message. My God, when does it ever end?
So I go into Control Panel > Administrative Tools > Services > Apple Mobile Device and start it back up... only to watch it stop again inexplicably moments later. Hmm... Restart. Stays on. Unplug the iPod and plug it back in. Apple Mobile Device Service stops again. Maybe it's the iPod Service itself. Hey, that one's not started! [Start] "Windows could not start the iPod Service service on Local Computer -- Error 5: Access is denied."
What the f*ck is it with this "Access denied" crap? I've never been denied access to even the most intimate functions, files and folders on my freaking computer before! What has Apple created!?
I thought, perhaps Apple Mobile Device software was somehow removed. Okay, let's redownload iTunes (aka Repair the program from the Programs and Features menu in the Control Panel -- same thing). Huh. "An error occurred while attempting to create directory C:\Program Files\iTunes\CD Configuration," and I can choose to Retry or Cancel. So, instinctively, I deleted the CD Configuration folder, assuming iTunes Setup would just recreate it.
Well, that didn't work now, did it? I deleted it and hit Retry, and it said, "The installer has insufficient priveleges to access the directory: C:\Program Files\iTunes\CD Configuration. Log on as administrator or contact your system administrator." Running the .exe file as an adminstrator changes NOTHING about this predicament.
So that's where it stands. No CD Configuration folder; full access to all files and folders involved; Apple Mobile Device Service still keeps going off for no reason; iPod Service still doesn't run; Repairing/Reinstalling iTunes, Quicktime, Bonjour, etc. does nothing; and God (aka Steve Jobs, apparently) hates me.
. . . . . . . . . . . . Help me.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W.

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Have you checked out the topics at the right in the More Like This section?
OT

Problem while Creating MVLOG with synonym in Oracle 9i:Is it an Oracle Bug?

Hi All,
I am facing a problem while Creating MVLOG with synonym in Oracle 9i but for 10G it is working fine. Is it an Oracle Bug? or i am missing something.
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
2 REFRESH ON DEMAND
3 WITH PRIMARY KEY
4 AS
5 SELECT name,id
6 FROM syn_t;
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
2 WITH PRIMARY KEY
3   (name)
4    INCLUDING NEW VALUES;
Materialized view log created.
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE    9.2.0.6.0       Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
REFRESH ON DEMAND
WITH PRIMARY KEY
AS
2    3    4    5 SELECT name,id
FROM syn_t;   6
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
WITH PRIMARY KEY
(name)
INCLUDING NEW VALUES; 2    3    4
CREATE MATERIALIZED VIEW LOG ON MV_t
ERROR at line 1:
ORA-12014: table 'MV_T' does not contain a primary key constraintRegards
Message was edited by:
Avinash Tripathi
null

Hi Nicloei,
Thanks for the reply. Actually i don't want any work around (Creating MVLOG on table rather than synonym is fine with me) . I just wanted to know it is actually an oracle bug or something else.
Regards
Avinash

Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.

Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ...

Facing the problem while creating sales order

Hi,
I am facing the problem while saving the sales order.
Error in system xxx/400 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors occurred while transferring the document into another system. To view the error messages, see the enclosed log.
Transmission log
u2022Product cannot be recoded for ERP System xxx/400(Notification E CRM_ORDER_MISC 015)
u2022Product cannot be recoded for ERP System xxx/400 (Notification E CRM_ORDER_MISC 015)
Kindly assist me.
Madhu

Hi Madhusadan,
Can you check whether the product exists in the ERP System or not? You can take the product names and can check the same using the Tcode: MM03 in ECC System. Also, it would be good if you have a look at the product from the CRM System if there are any errors or the product is already archived.
Is the Sales Order you are creating from a Preceding Transaction ?
Hope this helps.
Thanks,
Samantak.

Problem while Creating Control files while Cloning the Oracle DB

Hi,
I am failrly new to Oracle Administration. I have got the task of cloning our Production database into a new machine. With the help of various articles found over the web I have followed the below mentioned steps
1)Executed the Alter database command for getting the control file copy.
2) Taken the Datafiles,Control and redo log files copies into the Target machine.
3) Copied the Pfile with the neccessary changes into the target machine.
4) Edited the Create Control file syntax (generated from step 1) and executed the same on the target machine.
Now the problem I face is that I get the following error while executing the create Control file syntax
a)ORA-01503 - Creation of Controlfile failed.
b) ORA-00219 - Required controlfile size 41760 exceeds max allowable size 20000.
I am really stuck. Both my machine configurations and O/S installed are the same.
Please advice me on how to Proceed... Thanking you all in advannce.
Rgds,
SN.

Hi Jaffer,
This is my code........ The control file has been generated by executing the syntax alter database backup controlfile to trace at the source db .
STARTUP NOMOUNT pfile=ORADATA:ORAHOME1\ADMIN\ORACLE\PFILE\INIT.ORA;
CREATE CONTROLFILE set DATABASE "ORACLE" RESETLOGS NOARCHIVELOG
MAXLOGFILES 32
MAXLOGMEMBERS 2
MAXDATAFILES 32
MAXINSTANCES 16
MAXLOGHISTORY 65535
LOGFILE
GROUP 1 'ORADATA:ORAHOME1\ORADATA\ORACLE\LOG2ORCL.ORA' SIZE 200K,
GROUP 2 'ORADATA:ORAHOME1\ORADATA\ORACLE\LOG1ORCL.ORA' SIZE 200K
DATAFILE
'ORADATA:ORAHOME1\ORADATA\ORACLE\SYS1ORCL.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\USR1ORCL.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\RBS1ORCL.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_DATA.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_INDEX.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KAN_DAT.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KAN_INDEX.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KIS_DATA.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KIS_INDEX.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_LUB_DATA.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BIMBJ01.DBF',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BIMAT01.DBF',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BITPA01.DBF',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BLUBFSINDEFX01.DBF',
'ORADATA:ORAHOME1\ORADATA\ORACLE\TEMP01.DBF',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_TOOLS.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\IMPORT1.DBF'
CHARACTER SET WE8ISO8859P1
# Recovery is required if any of the datafiles are restored backups,
# or if the last shutdown was not normal or immediate.
#RECOVER DATABASE
# Database can now be opened normally.
#ALTER DATABASE OPEN;
# No tempfile entries found to add.
#

"Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa K

Hi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin

Problem while capturing- auto creating clips

Similar Messages

Maybe you are looking for