Problem while changing Cheque Form

Hi all,
I have uploaded the cheque form form Qul to Dev server with the same NAME what has in Qul Server,
as it is not exit in Qul. Both are different servers.
After the modificationt to form i transported the form from Dev to Qul.
the modifications are shown in form but not shown in the Cheque PRINTOUT(i take the output of cheque before and after the
changes and compared).
Can any one Guide me.

HI..
I have solved the issue myself.

Similar Messages

Problem while changing Business Area in Cost Center Master Data

I am having a problem while changing the Business area in cost center master data, the system does not allow to change the business area due to the following reasons;
1. The transactional data already exists for that cost center
2. The desired date required to be changed, falls between analysis period 01.01.2000 to 31.12.2999
Can anyone help me in order to reslove this issue
Thanking in anticipation
Edited by: Arshad Iqbal on May 24, 2010 2:10 PM

Dear Dejan !!
Thanks a lot for resolving my problem actaully i have tested the scenario in Testing Server by changing the fiscal year and the system allowed to change the business area before any transactional data posted.
Thanks Once Again
Regards
Ch. Arshad Iqbal

Problem while changing decimal places in SAP B1 2007

Hi Experts,
I want change the decimal places of Quantity type fields from 2 decimal places to 4 decimal places. But while changing it in Genral settings form ,it shows the error message "Cannot update while another user is connected to the company". it is working in SAP B1 2005B but not in SAP B1 2007
Please help me if you have any solution on this issue..
Thanking you in advance

Paul,
Please see SAP Note 1247060 as is discusses the fact that this did work in 2005, but the behavior was changed in version 2007 ...
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&;note_numm=0001247060
Eddy

Urgent : problem while migrating from forms 6i to 9i

We are trying to upgrade forms 6i to forms 9i.
One of our forms is using the host command to call a shell script . This command worked successfully in the form when it was
in character mode in forms 6i. But we are facing problems while deploying it on web using forms9i.
Would appreciate an early response.
Regards ,
Pooja

Hi Pooja,
1. Please check out the script by running it manually in the App Server Machine.
2. If you are using any environment variables in the shell script, that are not defined in the shell script itself, then try defining in the shell script itself. Because, the environment variable that you are using might not be availble for the script while running using host.
HTH,
Regards,
Arun

Problem while creating script form - lang EN is not available in client 800

Hi friends,
I getting a problem while creating a script form in SE71.
if I give the name of the script (zform1) and clicked on create then its giving an information message like " Form ZFORM1 language EN is not available in client 800".
But if I use this form in the abap program its giving stop message "Form ZFORM1 language EN is not active and has no errors" and the control is coming out of the program.
What could be the problem and how to solve it friends . Please help me.
Thanks
-Hima

Hi There,,
By default all the forms will be there in client 100, if you are using the exisiting form and making a Z copy of the same,, then first you will have to copy from the client 100 to 800.
If you are creating the form right from the scratch,, you will that message,,but need now worry about that..
go head and create the Zform, don't forget to activate the form, before calling in the driver program.
In the driver program,, call the function modules to invoke the form and activate the driver program as well. then you are all set/
Thanks-
Rahul

Problem while upating user form

Hello experts !
I have problem while updating my user form.
I have a matrix , where i have already entered details in first row.
now when i again navigate to that particular document where i entered the details the in the row,
and add details in the next row and try to update,then it throws me an error
" This entry already exists in the following tables ' (@DE_D2) ( ODBC-2035 ) Message [ 131 - 183 ]' "
Even when i chk the table , i doesn't show any entries which i tried to enter .
It would be appreciable if any body suggests me that how to overcome this problem.
Regards
Krishna vamsi

Hello Parminder
Why to delete the data from child table
If i do so , then i will loose my data .
Regards
Krishna Vamsi

Problem while changing SAP Script

Hi all,
while trying to display or change a form in SE71, it gives the following msg ...
" <b>Form *** language EN is inconsistent in text file</b> "
Please can anyone help me on this ?
I have tried for language DE also

Hi
Which sapscript? a std one or custom one?
Anyway try to see the note <a href="https://websmp208.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=326801&_NLANG=E">326801</a>
Max

Is there any problem while changing WEBLOGIC server to OC4J

Hi,
We have developing a product in Jedeveloper 11g. In the development mode, we are using WEBLOGIC 10.3 as the application server. But during production mode, we have to apply the EAR files in oc4J APPLICATION SERVER.
While changing this, whether my system will work as such in the WEBLOGIC server?
Whether I loss any Rich Ajax specific fuctionalities? Is any rework in development is needed?
While Googling, I found, in JDeveloper 11g oracle prefers WEBLOGIC rather than OC4j. Can anyone advise the reason for this.
Thanks,
Prabhash.

Hi John,
Thanks for your valuable advise.
Can you advise is there any difference between OC4j and Oracle Application Server (OAS) . Is the Oracle App Server supports JSF 1.2 specification. While googling, the following link states that JDeveloper 11g supports OAS
http://www.oracle.com/technology/products/jdev/htdocs/11/as_supportmatrix.html#11g
Thanks much
Prabhash

Question do change in all language necesary while changing any form EN

hi
i want to know whether if we are changing any form in any language do the changes are necesaary to do for all languages line EN or chinges or japenese
if the form exists in that language
if we do nt do what id implication or complication for that
regards
arora

hi Atish
what i mean is that the form exists in two diffreence languages
so for any change do i need to make changes in all languages
as if i do in one language its not reflected in another languages manuyally we have to do
arora

Problem while changing Sales order using 'BAPI_SALESORDER_CHANGE'

Hi all,
Below is my code to update delivery block value:
FORM call_bapi_salesorder_change .
DATA: iv_bapi_view LIKE order_view.
DATA: gt_sales_doc TYPE STANDARD TABLE OF sales_key, " Document Numbers to Be Selected
        gt_items TYPE STANDARD TABLE OF bapisdit. " Order Item Data for Document Numbers
*************************************************************8
DATA:order_headers_out LIKE bapisdhd OCCURS 0 WITH HEADER LINE.
DATA:order_header_inx LIKE bapisdh1x.
DATA: lv_salesdocument LIKE bapivbeln-vbeln.
data: lv_matnr(10) type c.
DATA:
gt_schdule TYPE STANDARD TABLE OF bapischdl, " for gl date & load date
gt_schdulex TYPE STANDARD TABLE OF bapischdlx, " for partner role and partner function.
        gt_return TYPE STANDARD TABLE OF bapiret2,
        gt_itemin TYPE STANDARD TABLE OF bapisditm,
        gt_iteminx TYPE STANDARD TABLE OF bapisditmx ,
        gt_bapisdh1 TYPE STANDARD TABLE OF bapisdh1.
DATA:gs_head_bapi TYPE bapisdh1x,
       gs_schdule TYPE bapischdl,
       gs_schdulex TYPE bapischdlx,
       gs_return TYPE bapiret2,
       gs_itemin TYPE bapisditm,
       gs_iteminx TYPE bapisditmx,
       gs_bapisdh1 TYPE bapisdh1.
CLEAR : gt_schdule,gt_schdulex,gs_return.
REFRESH gt_return.
gs_head_bapi-updateflag = 'U'.
SORT gt_final BY vbeln.
CLEAR gs_vbep.
REFRESH gt_vbep[].
CLEAR gs_final.
LOOP AT gt_final1 INTO gs_final.
    gs_itemin-itm_number = gs_final-posnr.
*move gs_final-matnr to lv_matnr."qx94162
   gs_itemin-material = gs_final-matnr.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
      EXPORTING
        input = gs_final-matnr
      IMPORTING
        output = gs_final-matnr.
   CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = lv_matnr
    IMPORTING
     output = lv_matnr.
   gs_itemin-material = lv_matnr.
    gs_itemin-material = gs_final-matnr.
    gs_iteminx-itm_number = gs_final-posnr.
    gs_iteminx-updateflag = 'U'.""changed to I
    gs_iteminx-material = 'X'.
    " gs_schdule-req_dlv_bl = gs_final-lifsp. " Delivery block
    gs_schdule-itm_number = gs_final-posnr.
    gs_schdulex-itm_number = gs_final-posnr.
    gs_schdule-sched_line = '0001'.
    gs_schdulex-sched_line = '0001'.
   MOVE gs_final-lifsp to gs_schdule-req_dlv_bl.
    gs_schdule-req_dlv_bl = gs_final-lifsp.
    gs_schdulex-req_dlv_bl = 'X'. " Delivery block
    gs_schdulex-updateflag = 'U'.
    gs_bapisdh1-sales_org = gs_final-vkorg.
    APPEND gs_schdule TO gt_schdule.
    APPEND gs_schdulex TO gt_schdulex.
    APPEND gs_itemin TO gt_itemin.
    APPEND gs_iteminx TO gt_iteminx.
   Append gs_BAPISDH1 to gt_BAPISDH1.
    lv_salesdocument = gs_final-vbeln.
    CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
      EXPORTING
        salesdocument               = lv_salesdocument
       ORDER_HEADER_IN             = gs_BAPISDH1
        order_header_inx            = gs_head_bapi
SIMULATION                  =
BEHAVE_WHEN_ERROR           = ' '
INT_NUMBER_ASSIGNMENT       = ' '
LOGIC_SWITCH                =
NO_STATUS_BUF_INIT          = ' '
      TABLES
        return                      = gt_return
   order_item_in               =    gt_itemin
   order_item_inx              = gt_iteminx
PARTNERS                    =
PARTNERCHANGES              =
PARTNERADDRESSES            =
ORDER_CFGS_REF              =
ORDER_CFGS_INST             =
ORDER_CFGS_PART_OF          =
ORDER_CFGS_VALUE            =
ORDER_CFGS_BLOB             =
ORDER_CFGS_VK               =
ORDER_CFGS_REFINST          =
      schedule_lines                = gt_schdule
      schedule_linesx               = gt_schdulex
ORDER_TEXT                  =
ORDER_KEYS                  =
CONDITIONS_IN               =
CONDITIONS_INX              =
EXTENSIONIN                 =
NFMETALLITMS                =
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    REFRESH: gt_schdule, gt_schdulex, gt_itemin , gt_iteminx.
    LOOP AT gt_return INTO gs_return.
      WRITE / gs_return-message .
    ENDLOOP .
ENDLOOP.
ENDFORM.                    " CALL_BAPI_SALESORDER_CHANGE
When I am using material value as 18342 using CONVERSION_EXIT_ALPHA_OUTPUT:
ORDER_HEADER_IN has been processed successfully
Material is not defined for sales org.A101, distr.chan.00, language DE
Error in ITEM_IN 000030
SCHEDULE_IN has been processed successfully
The sales document is not yet complete: Edit data
Sales document 5010000715 was not changed
and when I am using CONVERSION_EXIT_ALPHA_INPUT (000000000000018342)or while debuging when I am changing value to 0018342 :
I am getting below dump:
Runtime Errors         DATA_LENGTH_0
Exception              CX_SY_RANGE_OUT_OF_BOUNDS
Date and Time          21.10.2010 07:22:17
Information on where terminated
     Termination occurred in the ABAP program "SAPLVBAK" - in
      "MAP_VBAP_TO_BAPISDIT".
     The main program was "RS_TESTFRAME_CALL ".
     In the source code you have the termination point in line 168
     of the (Include) program "LVBAK001".
     The termination is caused because exception "CX_SY_RANGE_OUT_OF_BOUNDS"
      occurred in
     procedure "MAP_VBAP_TO_BAPISDIT" "(FORM)", but it was neither handled local
      nor declared
     in the RAISING clause of its signature.
     The procedure is in program "SAPLVBAK "; its source code begins in line
     99 of the (Include program "LVBAK001 ".
The same dump I am getting while executing this above BAPI from SE37 tcode with the same test data.
but I am able to change it though Va02 tcode.
Edited by: Arora26 on Oct 21, 2010 7:58 AM

Hi,
have you searched for OSS notes? The note 1137897 looks like related to your problem. It mentions different BAPI but I assume that both BAPI reuse same routines and therefore it might solve your problem as well.
Cheers

Problem while openning Interactive Form

Hi All,
I am facing an propblem while openning the Interactive PDF. I created an interactive PDF in Adobe LiveCycle Designer v8.0.
The Adobe Reader was 8.1. The form was working well and after quite few days i am got this below message, but the same form was openning well in other systems with adobe reader 9.1 and i updated the reader with 9.1 in my system aslo and i am still getting this message. What would be the problem and kinldy provide a solution for this.
"This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer available. Please contact the author for the original version of this document."
Thanks and Regards,
Chandran S

Hi,
1. Check your Authorization
2. Are you using some other language in adobe form
3. Ask Your Basis team to restart the Server
4. Check if any upgrade needed for your Adobe reader
5. Increase the Virtual Memory of you are System.
By
Parthasarathi

Problem while changing the query of the field in Oracle apps 11.5.10

Hello All,
Requirement:
User want to change the query of the LOV attached to Ordered item field on Line items tab on the Sales order form in Order managment
Block name = 'LINE'
Field name = 'ORDERED_ITEM_DSP'
LOV attached to this field in FMB: ITEMS
LOV attached to this field in front end: ENABLE_LIST_LAMP
Problem: Following code is firing at all points (Debug messages are appearing at all points) but Query of the LOV attached to item is still same.
How can in FMB LOV is "ITEMS" and in front end "ENABLE_LIST_LAMP"
My guess is there is some problem with the LOV name which we are passing in the code below. Because LOV name attached to item are different in front end and FMB. There is no LOV in FMB which has “SYSTEM ITEMS Description” kind of structure.
I have written following code in custom.pll (l_chr_rg_query is query taken from the record group attached to “ITEMS” named LOV with some modifications ex: rownum<6 so that it will show only 6 records in LOV if it is really firing our query for LOV)
IF ( form_name = ‘OEXOEORD’
AND block_name = ‘LINE’
AND field_name = ‘ORDERED_ITEM_DSP’
AND event_name = ‘WHEN-NEW-ITEM-INSTANCE’
THEN
MESSAGE (‘message1’);
l_chr_rg_name := ‘XXLION_UNIFORM_CODE_RG’;
l_chr_rg_query :=
‘SELECT item, item_id, item_description, inventory_item_id,item_identifier_type,null item_identifier_type_meaning, ‘
|| ‘inventory_item, address, cust_address, item_definition_level ‘
|| ‘FROM oe_return_items_v ‘
|| ‘WHERE (sold_to_org_id = :parameter.lov_num_param1 OR sold_to_org_id IS NULL)’
|| ‘ and rownum < 6 ORDER BY item’;
MESSAGE (‘message2’);
l_rg_id := FIND_GROUP (l_chr_rg_name);
MESSAGE (‘message3’);
IF ID_NULL (l_rg_id)
THEN
MESSAGE (‘Creating record group here’);
l_rg_id :=
CREATE_GROUP_FROM_QUERY (l_chr_rg_name, l_chr_rg_query);
END IF;
errcode := POPULATE_GROUP (l_rg_id);
MESSAGE (‘ERROCODE is : ‘ || errcode);
L_lov_id := FIND_LOV (‘ITEMS’); --My guess is this LOV name is the source of problem.
MESSAGE ('Error code is4');
SET_LOV_PROPERTY (l_lov_id, group_name, l_rg_id);
MESSAGE ('Error code is5');
SET_ITEM_PROPERTY ('LINE.ORDERED_ITEM_DSP', lov_name, 'ITEMS');
END IF;

I found that there is no problem with code. My problem is not technical, its a functional problem.
It is related to Inventory's "System Items" KFF.
Can anybody tell me, to this "System Items" KFF, one value set is assigned. but it is of none type of value set. so from where the values in LOV are coming?

Facing Problem While Opening the Form Builder 10g

Hi Experts,
I am Facing below Error while opening one of the developed forms in the form builder 10g. Operating system of my laptop is Window 7.
Oracle Forms Designer Has stopped Working
Windows can check online for a solution to the problem.
---> Check online for a solution and close the program
----> close the program
Please provide any tips or solutions to resolve above Error.
Thanks in advance

Meher Irk wrote:
Hi Experts,
I am Facing below Error while opening one of the developed forms in the form builder 10g. Operating system of my laptop is Window 7.
Oracle Forms Designer Has stopped Working
Windows can check online for a solution to the problem.
---> Check online for a solution and close the program
----> close the program
Try this..
Open form builder.
Make connection with database.
Now open the form.
Hope this works..

List Of Values problem while running a form

Hi all,
Actually I had developed a form in Forms 4.5. If I connect to the Personal Oracle Database on the same machine, then it is working properly. But if I connect to Oracle server across network and try to run the form, then a message is coming ' F45RUN - The program you are trying to running had problem. Choose ''Close'' or ''Ignore'''. It is giving error of that sort.
Actually the form has two list items, which will have the values selected from the database. If I comment out the statements 'Populate_list(....)', then the form is opening for runtime. What could be the problem??
Thanks in Advance.
Badarinath ([email protected]) If someone could mail me, then it would be even helpful.

Hi Badrinath,
I couldn't underestand the exact problem that you are facing. This may be just because of the different Datase versions. Just try to add "onlogon trigger" to your form having the following code in it:
logon('username','password@connect_string to the server');
Fully compile the form and then run.
Let me know if OK.
Regards,
Aqueel([email protected])
Hi all,
Actually I had developed a form in Forms 4.5. If I connect to the Personal Oracle Database on the same machine, then it is working properly. But if I connect to Oracle server across network and try to run the form, then a message is coming ' F45RUN - The program you are trying to running had problem. Choose ''Close'' or ''Ignore'''. It is giving error of that sort.
Actually the form has two list items, which will have the values selected from the database. If I comment out the statements 'Populate_list(....)', then the form is opening for runtime. What could be the problem??
Thanks in Advance.
Badarinath ([email protected]) If someone could mail me, then it would be even helpful.

Problem while changing the width of the Indesign document through inx.

Hi Guys,
I am facing a problem related to the width of InDesign documents. Description of the problem is as follows:-
I have created an InDesign document with height = 700 and width = 500 and export this as an inx file (lets say Doc1.inx).
As "Doc1.inx" is just an xml file I have made certain changes to the height and width fields of the dcoument in it. (Height =900 and Width = 600)
For Height changes are made under following tags :- <docu>
                                                                               <docp>
                                                                                 phgt = "U_900" ;
For Width changes are made under tags :- <docu>
                                                                <docp>
                                                                  pwdt = "U_600";
Now when I opened the modified "Doc1.inx" file with InDesign the modifications for height are correctly reflected, but the width of the column doesn't gets changed. Please open the attachments to see the difference.
Attachment contains the snap shots of documents created at step 1(Initial_Doc1.indd) and step 3(Modified_Doc1.indd).
What should be the modifications we have to do in inx file to reflect the correct modified width of the document. Also is there any document or article which gives the correct understanding of the tags used in inx files.
Any help will be appreciable.

I'm having troubles getting any sensible values at all using CS -- on the other hand, you forgot to mention your version, so I figgered I could try.
(Just as an example, setting width & height to 600 pt and 900 pt -- you don't mention your units of measure either, is it meters? inches? -- I get "phgt="u_408c2000~0" pwdt="u_4082c000~0"", which doesn't make sense. Cicero's!? [*])
But further below, I can see some definitions for columns: count (colc="l_1") and some measurements in that same system, which I suspect to be the width and height you are looking for. You switch between describing you succesfully changed the width and height of the document, and complaining the column does not change. Apparently, the column width is defined in itself, rather than using the "document marges" you are used to in the interface itself.
[*] On second look, I can see more hexadecimal digits in other 'numbers'. It must be hexadecimally encoded IEEE floating point numbers -- "408c2000" decodes to 4.378906, and 4082c000 to 4.085938 -- both valid floating point numbers, but still I wouldn't know in what system.
I hope your version uses regular decimal notation!

Problem while changing Cheque Form

Similar Messages

Maybe you are looking for