Problem while copying datas using Copy Express

Hai Experts,
Greetings.
We were trying to copy Master and Configuration datas from test database to Live database using Copy express. The datas from Item Master, BP Master copied Correctly, but, in CoA (we are using Segmented Accounts) the G/L Account --> the Code column shows the System refernce no. (ie., _SYS00000002679) and the Name of the G/L Account is copied correctly.
Is there any solution to solve this problem.
Thanks and Regards
Raja

On your test company, there's segmented accounting setup. Is the segmented accounting setup on the Live company (or have you managed to use copy express to copy over the segments and other settings)?
If you've done that, then maybe you could export to XML your Copy Express worksheet and upload it somewhere so we can have a look?

Similar Messages

  • Hi Experts , I am currently facing problems while running restricted version copy .. The log says 0 location products copied and that the process has has timed out. the error message is /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014, th

    Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
    Regards
    Jerel

    Hi, thank you for your replies, I found out few things about my servlet, and its portability
    and i have few questions, although i marked this topic as answered i guess its ok to post
    I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
    of the modified files to the user for them to download the modified files.
    What i am using to get the tempdir i will paste
    File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
    System.out.println(baseurl);
    baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
    baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
    links to the user for download ?
    and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
    And i want to create unique directory for each request made to the servlet , so file names dont clash.
    one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
    Reply A.S.A.P. please..
    Thanks and regards,
    Mihir Pandya

  • Problem while writing data on xls file using jxl API

    Hi,
    I am getting problem while writing data on excel file using jxl api.
    When i write data on file and all handles associated to the file are closed, file size increases but when i open the file nothing is written in it and when file is closed manually from excel window, file size decreased to its original that was before writing data.
    here is code:
              FileOutputStream os = new FileOutputStream(this.dirPath + this.fileName, true);
              WritableWorkbook this.workbook = Workbook.createWorkbook(os);
    after writing data following handler are closed:
    this.os.flush();
                        this.workbook.write();
                        this.workbook.close();
                        this.os.close();
                        this.os = null;
    can any body help me.
    Thanks in advance

    Err, I did help you. I did understand your problem; and I solved it for you. What was missing was that you apparently made no effort to understand what you were being told. Or even consider it. You just argued about it, as though you were the one with the solution, instead of the one whose code didn't work.
    And the other thing that was missing was the part where you said 'thank you' to me for solving your problem. Somewhat more appropriate than biting the hand that fed you, frankly. I do this for nothing, on my own gas, and it's extremely irritating when people keep asking about problems I have already solved for them. I am entitled to discourage that. It's part of making them more efficient actually.
    But it happens often enough that it also makes me think I'm just wasting my time. Probably I am.

  • Error while insert data using execute immediate in dynamic table in oracle

    Error while insert data using execute immediate in dynamic table created in oracle 11g .
    first the dynamic nested table (op_sample) was created using the executed immediate...
    object is
    CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
    mark1 number,
    mark2 number
    t_sub_mark is a class of type sub_mark
    CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
    create table sam1(id number,name varchar2(30));
    nested table is created below:
    begin
    EXECUTE IMMEDIATE ' create table '||op_sample||'
    (id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
    end;
    now data from sam1 table and object (subject_obj) are inserted into the dynamic table
    declare
    subject_obj t_sub_mark;
    begin
    subject_obj:= t_sub_mark();
    EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
    end;
    and got the below error:
    ORA-00904: "SUBJECT_OBJ": invalid identifier
    ORA-06512: at line 7
    then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
    execute immediate 'insert into '||dynam_table ||'
    (SELECT

    887684 wrote:
    ORA-00904: "SUBJECT_OBJ": invalid identifier
    ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
    If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
    EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically.

  • Problem while retrving data from a view

    Hi Friends
      i have a problem while retriving data from a view <b>v_t685a</b>.
    the error message is :""" "V_T685A" is not defined in the ABAP Dictionary as a table, projection view or database view."""
    i wrote : select single VTEXT1 from V_T685A into w_cst_jin1 where
                        KSCHL = 'JIN1' and
                        KAPPL = 'V'.
    how to retrive the data.
    waiting for quick response
    Regards
    Mukesh

    Hi
    This is a Maintenance View, not a Database View
    SO can't fetch data using select statement.
    You can use the Table <b>T685</b> directly to fetch the condition Types data straight away instead of the view. write the same select for this table and use.
    Regards
    Anji
    Message was edited by:
            Anji Reddy Vangala

  • Problem while uploading data with GUI UPLOAD Function

    Hi,
      I am facing problem while uploading data with FM GUI UPLOAD    in out text file there are 7 row  but after the FM GUI UPLOAD  there are 14 entries are coming in Internal table   and each alternate row is coming as blank  with  0000 in some column   in internal table first row is proper and second line is blank so on.
    what can be the problem .
    The program in which we are using this we are using it from last 2 year but we are facing problem today only.
    regards,
      zafar

    Hi,
      The file formate is same as it is from last two years it is automatically generated by one another bar code server and there is no change  in the file formate.
      So waht can be the problem  to check any inconsistancy in system  i have develop a samll program fro  uploading a text file with same function module ,  but it is working fine.
    regards,
      zafar

  • Problem while reading data from Serial Port

    Hi All,
    I am facing some problem while reading data from Serial Port.
    As per the requirement I am writing the data on Serial Port and waiting for response of that data.
    Notification for data availabilty is checked with method public void serialEvent(SerialPortEvent event) of javax.comm.SerialPortEventListener.
    When we are writing data on the port one thread i.e. "main" thread is generated and when data availability event occures another thread "Win32SerialPort Notification thread" is generated. This creates problem for me as we can't control thread processing.
    So can anybody pls explain me how to overcome this problem?
    Regards,
    Neha

    My Problem is:-
    I am simoultaneouly wrting data on port & reading data from port.
    First I write data on port using outputStream.write() method. Now when target side sends me response back for the request on serial port DATA_AVAILABLE of SerialPortEventListner event occured,we are reading data from serial port.Now till the time we didn't get the response from target next command can't be written on the serial port. When we are writing data on port main thread is executed.Now my problem starts when DATA_AVAILABLE event occured.At this point another thread is created.Due to this my program writes data of next command without reading response of previous command.To solve this prob. I have used wait() & notify() methods as follows.But again due to this my pc hangs after execution of 2 commands. (PC hang in while loop in a code provided below.)
    From SOPs I could figure it out that after 2 commands we are not able to write data on serial port so DATA_AVAILABLE event doesn't occure n pro. goes in wait state.
    Can anybody help me to solve this issue.
    Neha.
    Code:
    public void serialEvent(SerialPortEvent event)
              switch (event.getEventType())
                   case SerialPortEvent.BI:
                   case SerialPortEvent.OE:
                   case SerialPortEvent.FE:
                   case SerialPortEvent.PE:
                   case SerialPortEvent.CD:
                   case SerialPortEvent.CTS:
                   case SerialPortEvent.DSR:
                   case SerialPortEvent.RI:
                   case SerialPortEvent.OUTPUT_BUFFER_EMPTY:
                                 break;
                   case SerialPortEvent.DATA_AVAILABLE:
                        try
                             dataThread = Thread.currentThread();
                             dataThread.setPriority(10);
                             dataAvailable = true;
                                                                                    byte[] tempArray=new byte[availableBytes];
                                        inputStream.read(tempArray);
                                                                       catch (IOException io)
                             SOP(io, "Error in serialEvent callback call for event DATA_AVAILABLE");
    public void  writetoPort(byte[] data) throws IOException
                             outputStream.write(data);
                              while(finalTimeOut >= actualTime)
                            if( ! dataAvailable)
                                    actualTime = System.currentTimeMillis();
                           else
              synchronized (mainThread)
                   mainThread = Thread.currentThread();
                   mainThread.wait();
    public  void sendDatatoUser(byte[] b) throws Exception, HWCCSystemFailure
              obj.returnData(b);
              synchronized(mainThread)
                   mainThread.notify();
                                                           

  • Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found

    We have a SOAP to PROXY scenario Which is in Production.
    We keep getting the Error:
    " Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found on host XXXXXX, ProgId =AI_RUNTIME_XXX.
    We are using Standard Receiver Determination with single receiver without any condition. And no mapping being used in interface determination.
    What are all the possible situation where we face such as this issue in Production.

    Please check the SAP note
    # 1706936 - messages fails with error java.lang.RuntimeException Bean SMPP_CALL_JAVA_RUNTIME3 not found
    1944248 - PI unstable due to JCO_SYSTEM_FAILURE mapping issues

  • Problem while loading data from ODS to infoobject

    Hi guys,
    I am facing problem while loading data from <b>ODS to infoobject</b>.
    If I load data via PSA it works fine but
    if I load data without PSA its giving error as Duplicate records.
    Do u have any idea why it is so.
    Thanks in advance
    savio

    Hi,
    when you load the data via the PSA, what did you select? Serial or Paralel?
    If you select serial most likely you don't have duplicates within the same datapackage and your load can go through.
    Loading directly in the IObj will happen thefore if you have the same key in two different packages, the "duplicate records" will be raised; you can perhaps flag your IPack with the option "ignore duplicate records" as suggested...
    hope this helps...
    Olivier.

  • How to rollback a traansacation if we got any problem while sending data to

    how to rollback a traansacation if we got any problem while sending data to a webservice...

    Is it SOA or OSB? Which version you are in..

  • Problem while importing data schema not found

    Hi,
    I'm facing problem while importing data through system to a schema and impdp gives me error that schema XYZ was not found but when I query dba_users schema exist there what could be the reason of this.
    Regards,
    Abbasi

    Hi,
    Here is complete listing
    bash-3.2$ impdp system/abc schemas=XYZ DIRECTORY=data_dir DUMPFILE=Today_dump.dmp LOGFILE=Today_log.log PARALLEL=8
    Import: Release 11.1.0.7.0 - 64bit Production on Friday, 07 January, 2011 11:18:57
    Copyright (c) 2003, 2007, Oracle. All rights reserved.
    Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    ORA-39002: invalid operation
    ORA-39165: Schema XYZ was not found.
    Regards,
    Abbasi

  • Facing  problem while loading data into XI

    Hi All,
    I am facing a peculiar problem while loading data into XI when we load small amount of data say 5-10 records these records gets processed, but when we try to load a bit higher volume say 100-500 which comes out to be around 7 record s per second then the record processing gets stalled. That is it gives a message that "recorded for outbound processing".
    So can any body throw some light on it and can tell us why we rare facing such problem and how can we resolve that problem.
    Thanks in Advance.
    Regards
    rahul

    Hi rahul,
    Deregistering and Registering the Queue is a temporary solution.
    The better way to this would be to Tune your Xi system as already mentioned by Vijaya as mentioned in the guide ,
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7fdca26e-0601-0010-369d-b3fc87d3a2d9
    Regards,
    Bhavesh

  • Problem with Polish Characters while downloading data using GUI_DOWLOAD

    Hi,
    I was trying to create a file on the presentation server using GUI_DOWLOAD.
    I am facing a problem with the data that contains polish characters.. like Ą , Ł..
    There is  a vendor numer in the system as FRĄCZEK, when i was tring to download, the vendor number is downloaded as FR¥CZEK, even i tried to download from SE16 also, still i am facing the same problem.
    I am facing the above problem with soem other polish characters..
    Is there any solution  to download the data properly.. ?
    Guys please help me.
    Thanks in advacnce.
    Regards,
    Sriram.
    Edited by: Srirama Murthy Maddirala on Oct 27, 2009 8:10 AM

    Hi Sriram,
    <li>Get the front-end code page using NLS_GET_FRONTEND_CP.
    <li>Pass the code page through GUI_DOWNLOAD.
    REPORT  ztest.
    TYPE-POOLS:abap.
    DATA:frontend_codepage TYPE  cpcodepage.
    DATA:codepage          TYPE  abap_encoding.
    "Get the Frontend Code page
    CALL FUNCTION 'NLS_GET_FRONTEND_CP'
      EXPORTING
        langu             = sy-langu
      IMPORTING
        frontend_codepage = frontend_codepage.
    "Pass the codepage through GUI_DOWNLOAD function module
    codepage = frontend_codepage.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename = 'C:\temp\data.xls'
        filetype = 'ASC'
        codepage = codepage
      TABLES
        data_tab = it_data.
    Thanks
    Venkat.O

  • Problem while downloading data to text file using GUI_DOWNLOAD FM

    Hi,
    When we download the data using the GUI_DOWNLOAD FM into the text file tab delimeted(table is built dynamically),
    Its coming in this format as shown below
    Field1  Fileld2  Field3
    1     2      3
    However I want it in this way
    Field1  Fileld2  Field3
    1          2         3
    Could someone please let me know how to achieve this?

    Do something like this:
    concatenate field1 field2 field3 into lv_outx "(data of sufficient length, type c)
    separated by gc_tab.  "Horizontal tab constant created as note above
    condense lv_outx no-gaps.  "squeeze out extraneous spaces but beware if you have text with spaces...drop the no-gaps.
    append lv_outx to my_internal_table.  "table with a single field type char, sufficient length
    open dataset  datasetname...
    loop at my_internal_table into ls_internaltabstructure.
      transfer internaltabstructure-outx to datasetName [length if needed].
    endloop.

  • Error while updating data using session and call transaction method

    Hi all,
        i have to update data using MM01 transaction from flat file to database.i have used both session method and call transaction method to do that.in both the methods data has been transferred from internal tables to screens but while updating the data that is by clicking the ok-code at the end of the transaction iam getting a dialogue box stating
       SAP EXPRESS DOCUMENT "UPDATE WAS TERMINATED" RECEIVED FROM AUTHOR "SAP".
      please tell whether the problem lies and solution for that.
                                       thanks and regards.

    hi,
    check your recording.check whether u saved your material no in recording or not.
    once again record the transacton mm01.
           MATNR LIKE RMMG1-MATNR,
           MBRSH LIKE RMMG1-MBRSH,
           MTART LIKE RMMG1-MTART,
           MAKTX LIKE MAKT-MAKTX,
           MEINS LIKE MARA-MEINS,
           MATKL LIKE MARA-MATKL,
           BISMT LIKE MARA-BISMT,
           EXTWG LIKE MARA-EXTWG,
    these are the fields which u have to take in internal table.
    this is the record which i took in my flatfile.use filetype as asc and hasfieldseperator as 'X'.
    SUDHU-6     R     ROH     MATSUDHU     "     001     7890     AA
    i did the same.but i didn't get any error.

Maybe you are looking for