Problem while copying the org unit

Hi,
SRM 4.0.
In PPOMA_BBP, user is trying to create a new org unit by copying an existing org unit. When the new org unit is created, the relationship B012 (Is managed by) is getting copied and is showing in PP01 and also showing in HRP1001 table. In the current org structure, every org unit is having a manger (with a red hat). When copying the org unit, the manager is not getting coped but the relationship is getting copied as mentioned above.
This should not happen. And this is not happening while creating a new org unit by clicking on the "Create" button in PPOMA_BBP.
Appreciate for any suggestion how to solve this.
Thanks & Regards,
Aswini

Hello Aswini,
I checked on a SRM 7 release and i get same behaviour as the one you described.
I did not find any OSS notes regarding this point.
I advise you to open an OSS message to have SAP clarification on this point.
Regards.
Laurent.

Similar Messages

  • Problem in Creating the Org Unit

    Hi Experts,
    I am only using the FM RH_INSERT_INFTY to create an Org unit with Infotypes 1000,1001 & 1028. We have recently upgraded our system to SRM 7.0 from 4.0.
    Problem: The BP  is not being created corresponding to the Org Unit.
    But, When i created an Org Unit with above FMs in SRM 4.0, the BP number is created & is showing in PPOSA_BBP.
    Please let me know if i need to run any other FM / do any modifications.
    Thanks in Advance,
    Vishnu Reddy

    Hello Aswini,
    I checked on a SRM 7 release and i get same behaviour as the one you described.
    I did not find any OSS notes regarding this point.
    I advise you to open an OSS message to have SAP clarification on this point.
    Regards.
    Laurent.

  • Error while copying the Root Organization Unit.

    Hi Experts,
    Can any one help me in copying the existing Orgnaization structure root in SRM , Because I have requirement like need to create a separate root with independent node under the Old one. so when try to copy the Org structure root node and click copy system give me a message like.
    " Before you select a function , select suitable entries in the structure."
    Can any one help on this copying of the Organization root.
    Regards
    Srujank.

    This is solved

  • Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

    Have an existing ex2010 sp3 organization.
    Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line.  I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
    still get the same error.  The error itself in the log is pretty useless:
    [05/07/2013 01:19:13.0137] [0] **********************************************
    [05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
    [05/07/2013 01:19:13.0137] [0] **********************************************
    [05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
    [05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
    [05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
    [05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
    [05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
    [05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
    [05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
    [05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
    [05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
    [05/07/2013 01:19:40.0496] [0] Starting file's copying...
    [05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
    [05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
    [05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
    [05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
    [05/07/2013 01:19:59.0762] [0] File's copying finished.
    [05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
    [05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
    [05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
    [05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
    [05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
    [05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
    [05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
    [05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
    [05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
    [05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
    [05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
    [05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
    [05/07/2013 01:20:12.0044] [0] The following roles are installed:
    [05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
    [05/07/2013 01:20:12.0075] [0] Server Name=WEX1
    [05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
    [05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
    [05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
    [05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
    [05/07/2013 01:20:27.0841] [0] Applying default role selection state
    [05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
    [05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
    [05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
    [05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
    [05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.  See
    the Exchange setup log for more information on this error.
    [05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:21:04.0154] [0] End of Setup
    [05/07/2013 01:21:04.0154] [0] **********************************************

    Hi,
    The cause is clearly described in the log:
    [05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
    I'd suggest you check NIC settings and AD configuration.
    Hope it is helpful.
    Fiona Liao
    TechNet Community Support

  • Multiple users under a Position in the Org Unit.

    Hi Experts,
    I have created a Position under an Org Unit and assigned 8 Users under that Position.
    The issue is that i want to send email only to 1 user from this position.
    If i mark the position as head of the org unit, all the users under that position becomes head.
    Can anyone suggest how  i can differentiate Users within the same Position ?
    Can Roles help me with m y requirement ?
    Thank You,
    Radhika.

    Hello,
    I'm not sure I understand what the problem is. This does have to do with workflows, I assume.
    If you want to send a workitem to a particular person, then why not just name that person, instead of the position?
    If there are criteria you can use to distinguish between the people (eg location) then you could use that in a rule (AC......) to determine which person the workitem should go to.
    regards
    Rick Bakker
    Hanabi Technology

  • An error has occured in the systemSENDER while copying the document-CRM-R/3

    Hi Sap Gurus,
    In our client (manufacturing industry)  have a CRM module too which is used by endusers
    In last few days, due to some problem some of the credit memo requests could not replicate into the R/3 system properly
    An error has occured in the system SENDER while copying the document
    Message no. CRM_ORDER_MISC 020
    Diagnosis
    Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
    Transmission log
    SALES_HEADER_IN has been processed successfully (Notification S V4 233)
    The sales document is not yet complete: Edit data (Notification W V1 555)
    Sales document 9400000123 was not changed (Notification E V4 219)
    Transaction ZITN   is not defined (Notification E V1 347)
    Error in SALES_ITEM_IN 000010 (Notification E V4 248)
    Transaction ZITN   is not defined (Notification E V1 347)
    Error in SALES_ITEM_IN 000020 (Notification E V4 248)
    Point will be rewarded to Everyone for helpful solutions.
    Thanks & Regards,
    San Rao.

    Dear All,
    My problem solved
    Item catergory ZTIN and MRP type PD not assigned to Schedule line category CP in ECC system.
    Any how thank you very much for your partcipation .
    Regards,
    San Rao.

  • Manager of the org.unit in HRMD_A

    Hi All
    I would like to send manager of the org.unit by using HRMD_A.
    As I have setup HRMD_A with filter on Infotypes 0000, 0001, 0002, 0006, 1000 & 1001.
    I thought the manager relationship will be send in IT 1001. But I don't see that information include in HRMD_A.
    Any information or experience on this matter will be highly appreciated. Any other suggestions to how this problems can be solved are also welcome.
    Thanks in advance.
    Best regards,
    Anpan

    Yes as part of transaction BD64 you can create a filter for this. In fact I think you can limit it even further so that it filters just the managers.  You can  do this by not only selecting the infotype and object, but you can also limit is by 'related object' and subtype.  So you can put the B12 as the subtype ( I think this is the chief subtype).   
    You could also  use the evaluation path, but if your evaluation path generates too much data then you can limited using the filters in BD64.  
    As for using the change pointers programs versus PFAL I am not sure, I am currently having the same delima on which one to use.
    Everett

  • Problem while priniting the Xcelsius

    Hello Experts,
    I have a problem while printing the xcelsius dashboard(.SWF file),
    While printing some objects not prinitng. and in the grid, the alert colors are not showing,
    I am using Xcelsius 2008 SP3.
    Please help me in resolving the issue.
    Thanks in advance,
    Radhika

    Hai
    Solution is to uninstall flash player, install Latest one
    When users open Microsoft PowerPoint files that contain SWFs and print the slides before running the
    Slide show, the printed slides are blank.
    To print SWFs in PowerPoint, start Slide Show mode and open each slide before printing the file.
    https://cw.sdn.sap.com/cw/ideas/1641
    http://www.tek-tips.com/viewthread.cfm?qid=1548648
    http://www.hackingsap.com/blog/tag/xcelsius
    http://www.sap-forum.org/f22/printing-xcelsius-t2789/

  • How are the org units created

    How are the org units created,say if i have 1000 org units which has to be created,in the PRH, what is the best solution, is it by transport or data upload?

    Hi Tom,
    I think your problem is solved . If not plz do let us know. And let us know which method you have obtained (LSMW or BDC) to upload the ORG UNIT Data??
    Have a great day..
    Regards,
    Sri..

  • Problem while calling the user exit

    Hi All,
    In one of the program one user exit is called. Before this user exit ther is one FM . If I copy the same function module with a new name Z* , this user exit is not getting triggered. The program is going till the point where CALL CUSTOMER-FUNCTION '001' IS written but after that it's not going inside the user exit. But if I put back the original FM , this suer exit is getting triggered and it's gong inside the exit. I've activated the Project for this user exit also. As per our requirement I've to copy the original FM into Z* FM.But my doubt is when I put back the original FM , this User Exit is getting triggered whereas when I copied this FM it's not working .
    Anybody could helpme out why it's happening ?
    Thanks
    Alok

    Srinivas,
    Yes it's related to the other post where I had to copy one standard Function Pool.While copying the function pool I copied the FMs also.This problem is coming out of one FM ,when I changed this to Z* at the place where it is called, the user exit which is written inside that FM is not getting triggered even though program is reaching till the point where this user exit is called .
    Any clue ?
    Thanks
    Alok

  • Problem while exporting the data from a report to an excel file.

    Hi SAP guru's,
    I have a problem while exporting the data from a report to an excel file.
    The problem is that after exporting, the excel file seems to have some irrelevant characters....I am checking this using SOST transaction..
    Required text (Russian):
    Операции по счету                                    
    № документа     Тип документа     № учетной записи     Дата документа     Валюта     Сумма, вкл. НДС     Срок оплаты     Описание документа
    Current Text :
       ? 5 @ 0 F 8 8  ? >  A G 5 B C                                   
    !   4 > : C       "" 8 ?  4 > : C      !   C G 5 B = > 9  7 0 ? 8 A 8        0 B 0  4 > : C         0 ; N B 0      ! C <       ! @ > :  > ? ; 0 B K        ? 8 A 0 = 8 5  4 > : C
    Can you help me making configuration settings if any?
    Regards,
    Avinash Raju

    Hi Avinash
    To download  such characteres you need to adjust code page to be used during export. You can review SAP note 73606 to identify which code page is required for this language
    Best regards

  • Dump while copying the entries in view cluster

    Hi Experts,
    I am having a scenario where i am getting the dump while copying the entries through the vies cluster.
    I have 2 tables CU00 and CU01. CU01 is depended on CU00.
    CU00- it is having schema which are defined by the user.(SCHEMA-P,DESC)
    CU01- this table is having the different tabs in a tab strip for a each of the user defined schema.(SCHEMA-P,SEQNO-P,TABID)
    the data will be as follows
    In CU00
              SCHEMA1         first schema
              SCHEMA2         second schema
    In CU01
              SCHEMA1         01              TAB1
              SCHEMA1         02              TAB2
              SCHEMA2         01              TAB2
              SCHEMA2         02              TAB3
    I maintained above 2 tables in a view cluster by making  CU00 is the start point and defined the field dependencies as well.
    in the T-code SE54 i tried to copy the existing schema and all its dependencies(means all the dependent entries in the CU01 table also).
    when i pressed the SAVE  button it is going for the dump by saying due to duplicate entries in the table CU01.
    but it should check the consistency and display the error message when i pressed the COPY key.
    I am badly struck up here. Please help me on this issue.
    thanks in advance.

    Hi Gouri,
    CU01 and CU00 both are dictionary tables.
    What I think is, while copying all the dependencies for a particular schema the system ha to check whether the data can be inserted into the child tables or not. I too dont know whether this can be done or not.
    If not, it should display an error message stating that " primary key violation occurs please use different key values..."
    thanks for the reply.

  • Error while copying the concurrent program

    Hi Experts,
    I am working on EBS 11i and database 9i. When i am trying to copy the existing concurrent program,it's giving below error.
    Error: Please enter a unique segment name, the segment name is already defined for other segment.
    Could you somebody help me to get rid off this error.
    Thanks.

    While copying the concurrent program, what is the short name and name for the new concurrent program?
    Hope you are not giving the same name as the old CP.
    By
    Vamsi

  • Problem while updating the Support Package 17 on my SAP WAS SP9

    Hi,
    I'm facing problem while updating the Support Package 17 on my SAP WAS SP9
    ERROR 2006-10-13 10:23:22
    FSL-06002  Error 2 (The system cannot find the file specified.
    ) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).
    Please help me in this regard.....
    Thanks in advance...
    Satya

    Hello gentlemen, I am also having problem with the following running on 64 bit Windows and SQL2005/64 bit. I am erroring in Step 8 'Updating JDBC' driver. I am attempting to update from SP9 to SP18. The WEBAS Jave installed went flawless but I seem to be stuck here. Any help is appreciated...
    ERROR 2006-11-22 10:13:57
    FSL-06002  Error 2 (The system cannot find the file specified.
    ) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).

  • What are the img setting to be fullfilled while copy the Sales document typ

    Hi What are the setting to be fullfilled while copy the sales document type and item category.
    Note:  I have already copied, but unable do the PGI(Post goods issue),  and Billing.
    Thanks
    Prasanna

    Hi
    Answer for this Question.
    we have set the copy control for sales order type and delivery and billing
    Regards
    Prasanna R

Maybe you are looking for