Problem while creating a system copy

Hi guys,
I've created a copy of my original BW system with the database copy of SQL server procedure:
1. Copy DB from "old" system and perform "post" activities (SID change, BD54 and after - BDLS -"old" logical sys. Name to "new" one..).
2. Verify RFC to ECC source system and create new RFC in ECC source system to "new" BW system.
3. Make BW logical system known to ECC source system (BD54).
4. RFC names are the same as Logical system names (both BW and ECC sides).
When I try to restore the source system connection (The original one) on the "new" BW system I get the following message:
The Connection BA is used in the PRD300YPCC. Source System as a Connection BWPCLNT550 to BW.
Do You Want to Delete this Connection in the Source System? The Connection is Restored After It Has Been Deleted Successfully.
If I answer delete - than the source system is working on the new copied BW system. But the original source system on the original BW system will have the same problem I'm having with the copied systems. This means that only one system could be connected to the ECC production on the same time.
Is there a way to make it work - i.e have both BW systems connected to the same ECC system. We want to have it done so we could upgrade one system and check it against the productive system.
Thanks alot,
Tomer Steinberg.

Still not solved.

Similar Messages

  • Problem While Creating New system

    Hi.
    i have downloaded sap netweaver 7.01(trail version) from SCN.
    installation was successful.
    Frontend GUI was installed in System Drive(C Drive)
    and Netweaver was installed in D Drive
    i have started the application server.
    in the logon pad what are the details i need to enter while creating new systems in logon pad.
    i followed help and typed the same info as in the f1 help.
    in connection tab:
    connection type: Custom Application Server
    System connection parameters:
    Description: SAP
    Application Server : u9cmain (as in f1 help)
    System Number: 00(as in f1 help)
    System ID: u9c(as in f1 help)
    SAProuter Sring: (empty)(as in f1 help)
    after giving this details. when i logged in it shows this "hostname u9cmain unknown, check your application server name"
    how can i rectify this error. where can i check my application server name...
    help me out plz.

    >i followed help and typed the same info as in the f1 help.
    You can't use the same host name and SIDs as per help under F1
    Configure as below:
    Description: SAP (You can use anything)
    Application Server : (your computer name or IP address)
    System Number: (has to be 2 digit, and which numbers you have assiged while installation)
    System ID: (your instance name)
    SAProuter Sring: (not required)

  • Problem while creating business system...?

    Hi All
    My Scenario is RFC - To - File. For this i am trying to creating a business system with web as ABAP. I have specified all the parameters but when i click on next i am getting "The selected client has an associated logical system name that is already used for another business system. Select a different client" message.
    Now how to create an another business system as web as abap with same server , client , installation number and all.... Could you please tell me...
    I dont want to use the existing business system
    Thanks & Regards
    Ravi Shankar B

    Sun,
    yes, u have 2 option as Ramesh said...
    There is no problem in reusing the business system.
    <b>The selected client has an associated logical system name that is already used for another business system. Select a different client" message.</b> if u want to create another business system...give dirretent<b> Logical System name</b>
    and <b>different client</b>
    see here how to create Business system...step by step!!
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
    regards
    biplab
    **reward if it helps you!!

  • Problem while creating Logical System Connecting Portal to ECC (Backend)...

    Hi
    - I am trying to connect portal to ABAP so that from portal's iView i could access any ABAP T-Code (e.g. SE37).
    - Secondly, just wanted to let you know that i am not implementing SSO.
    - I used iView's SAP GUI Type = SAP GUI for HTML.
    I made following 3 tests, out of which ITS connection is failed. and while previewing my iView i m not able to connect with ABAP and giving error:  "The URL http://192.168.1.104:8001/sap/bc/gui/sap/its/webgui was not called due to an error."
    Could u pls guide me what to do....  And i mentioned everything at the bottom in detail.
    Thanks & looking forwarded for your replies.....
    SAP Web AS Connection (Successful)
    Test Details:
    The test consists of the following steps:
    1. Checks the validity of system ID in the system object.
    2. Checks if the system can be retrieved from the PCD.
    3. Check whether a SAP system is defined in the system object
    4. Validate the following parameters: WAS protocol; WAS host name
    5. Checks if the host name of the server can be resolved.
    6. Pings the server to see if it is alive.
    7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
    8. Checks HTTP/S connectivity to the defined back-end application
    Results
    1. The system ID is valid
    2. The system was retrieved.
    3. The system object represents an SAP system
    4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (192.168.1.104:8001)
    5. The host name 192.168.1.104 was resolved successfully.
    6. The server 192.168.1.104 was pinged successfully.
    7. The Web AS ping service http://192.168.1.104:8001/sap/bc/ping was pinged successfully.
    8. An HTTP/S connection to http://192.168.1.104:8001/sap/bc/bsp/sap was obtained successfully.
    ITS Connection (Failed)
    Test Details:
    The test consists of the following steps:
    1. Checks the validity of system ID in the system object.
    2. Checks if the system can be retrieved from the PCD.
    3. Check whether the system object has a valid system alias
    4. Check whether a SAP system is defined in the system object
    5. Validate the following parameters: ITS protocol; ITS host name
    6. Checks if the host name of the server can be resolved.
    7. Pings the server to see if it is alive.
    8. Checks HTTP/S connectivity to the defined back-end application
    Results
    1. The system ID is valid
    2. The system was retrieved.
    3. Retrieval of the default alias was successful
    4. The system object represents an SAP system
    5. The following parameters are valid: ITS Protocol (http) ITS Host Name (192.168.1.104:8001)
    6. The host name 192.168.1.104 was resolved successfully.
    7. The server 192.168.1.104 was pinged successfully.
    8. User mapping is valid
    9. An HTTP/S connection to http://192.168.1.104:8001/sap/bc/gui/sap/its/webgui/ was not obtained successfully; this might be due to a closed port on the Firewall.
    Test Connection with Connector (Successful)
    Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the backend application using the connector defined in this system object
    Results
    1. Retrieval of default alias successful.
    2. Connection successful.
    I am getting following error while Previeiwng iView.
    Error when processing your request
    What has happened?
    The URL http://192.168.1.104:8001/sap/bc/gui/sap/its/webgui was not called due to an error.
    Note
    The following error text was processed in the system D10 : Template interpretation cancelled, syntax error.
    The error occurred on the application server eccdcs1s_D10_01 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
          SYSTEM-EXIT of program SAPLSFUNCTION_BUILDER
          Function: RS_FUNCTION_INITIAL_SCREEN of program SAPLSFUNCTION_BUILDER
          Method: IF_WB_PROGRAM~PROCESS_WB_REQUEST of program CL_FB_FUNCTION_INITIAL_SCREEN=CP
          Method: DO_THE_NAVIGATION of program CL_WB_NAVIGATOR===============CP
          Method: DO_THE_NAVIGATION of program CL_WB_NAVIGATOR_VIS_AS_DYNPRO=CP
          Method: PROCESS_WB_REQUEST of program CL_WB_MANAGER=================CP
          Method: PROCESS_REQUEST_QUEUE of program CL_WB_MANAGER=================CP
          Method: IF_WB_MANAGER~SET_WORKSPACE of program CL_WB_MANAGER=================CP
          Method: START_INTERNAL of program CL_WB_STARTUP=================CP
          Module: MANAGER_START of program SAPLWB_MANAGER
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the   system D10 in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server eccdcs1s_D10_01 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server eccdcs1s_D10_01 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 001 -u: SAPUSER -l: E -s: D10 -i: eccdcs1s_D10_01 -w: 0 -d: 20090924 -t: 202054 -v: RABAX_STATE -e: ITS_CANT_LOAD_INCLUDE
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Edited by: Harpal Singh on Sep 24, 2009 4:55 PM

    Hi,
    > Goto SE80, Select "Internet Service". Give service name as WEBGUI and enter. Right click on the WEBGUI and select Publish -  > Complete service.
    Source : http://wiki.sdn.sap.com/wiki/display/BI/BiAdminCockpit+Issues
    Or call transaction SIAC_PUBLISH_ALL_INTERNAL to publish all services.
    [Note 964521 - Short dump ITS_CANT_LOAD_INCLUDE w/ call of SAP GUI for HTML|https://service.sap.com/sap/support/notes/964521].
    Regards,
    Pierre

  • Error while creating SOURCE SYSTEM

    Hi All,
    I have a problem while creating Source System to a Solman syatem configured with BW content. I have configured few some source systems already in the same Solman System.The system shows the following error, previous to this i get the message a "generating connection to the source system"
    <b>Error in source system RXX_100
    Message no. RSAR502
    Diagnosis
    With Remote Function Call to system RXX_100 error Screen output without connection to user.  ccurred.
    Procedure
    Remove the cause of the error.</b>
    Kindly provide me suggestions and DOCS related to the same.
    Suitable points will be awarded for replies.
    Expecting your kind reply,
    Vineeth

    Hi ,
    In SCC4 the source client should not set as production when creating the source system connection between two systems.Please check below SAP note
    973555 - System must be open for creating/connecting source systems
    Thanks,
    Shanaka

  • Hi Experts , I am currently facing problems while running restricted version copy .. The log says 0 location products copied and that the process has has timed out. the error message is /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014, th

    Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
    Regards
    Jerel

    Hi, thank you for your replies, I found out few things about my servlet, and its portability
    and i have few questions, although i marked this topic as answered i guess its ok to post
    I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
    of the modified files to the user for them to download the modified files.
    What i am using to get the tempdir i will paste
    File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
    System.out.println(baseurl);
    baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
    baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
    links to the user for download ?
    and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
    And i want to create unique directory for each request made to the servlet , so file names dont clash.
    one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
    Reply A.S.A.P. please..
    Thanks and regards,
    Mihir Pandya

  • Regarding problem while assigning logical system

    Hi Friends,
    I had a problem while assigning logical system to the client where in both of my systems are having same client number which belong to 2 different systems.
    while assigning the sender and receiver logical system to the same client i am facing problem stating that an entry has already been made for the same key.
    could any one plz give me a clear idea...while assigning logical systems (cross clients) for 2 different systems having same client number.
    Regards,
    Madhu

    Hello Madhusree,
    I'm running with same problem. I've created two logical systems and assigned them to two different clients. But here pops up the issue while generating partner profiles, throwing error "No active plan version exists". Later when I researched about the issue, I came to know that T77S0 table doesn't have any entries regarding plan versions. Basically, I created two clients by doing "client copy" from source client (800 & 100). And I could see plan version entries in the T77S0 of client 800. So, I thought of assigning just defined logical system to the source client 800 itself. But it throws error saying "entry already exists"; as client (800) is already assigned with other logical system.
    By coming across your post, gives me leap of hope that two logical systems can be assigned to same client. Could you please share me those troubleshooting steps concerning this issue. Points will be awarded.
    Regards, Anil. 

  • Portal Runtime Error while creating  new system in portal content

    Hi
      Can anyone  solve my problem, i am geting error while creating new system in p ortal content
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
    Component Name : com.sap.portal.admin.templateselectionwizard.default
    com/sap/portal/iviewserver/cache/OClass.
    Exception id: 11:29_26/12/06_0014_5891950
    See the details for the exception ID in the log file

    Hi,
    Check this link for creating system object
    http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
    Regards
    Arun

  • While creating Billing, system is very slow..performance issue

    Hi,
    While creating Billing, system is very slow. How can I debugg and provide the analysis where is the exact problem.
    This is showing performance issue.
    Waiting for kind response.
    Best Regards,
    Padhy
    Moderator Message : Duplicate post locked.
    Edited by: Vinod Kumar on May 12, 2011 10:59 AM

    hi,
    Chk the links
    http://help.sap.com/saphelp_nw04/helpdata/en/4a/e71f39488fee0ce10000000a114084/content.htm
    Re: How to create Secondary Index?
    How may secondary indices I can create on the ODS?
    Deletion of ODS index
    Ramesh

  • RUNTIME ERROR WHILE CREATING NEW SYSTEM IN EP6

    Hi
    Can anyone solve my problem, i am geting error while creating new system PORTAL FOR to connect biw 3.5 system
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
    Component Name : com.sap.portal.admin.templateselectionwizard.default
    com/sap/portal/iviewserver/cache/OClass.
    Exception id: 11:29_26/12/06_0014_5891950
    See the details for the exception ID in the log file
    thanks in advance
    Rock

    hi,
    check the log file and let me the the error.
    manish

  • Integration Server not found while creating  Business system

    Hi all,
    I m facing following problems in XI.
            While creating Business system, "integration server" name  is not displayed in the drop down box. and
    I m getting the error  "Unable to read software component versions from System Landscape Directory "XXXXXX:50000"" while importing software components in Repository from SLD.
    thanks and regards
    vijay

    Hi Vijay
    Please check if you have assigned the correct Integration server to the business system in SLD.
    and for the the software component error check if the user has required access (roles assigned) for importing the software component.
    Thanks
    -Mitesh

  • Problem while creating data transfer process

    Hi friends
    I am using BI 7.0 version.
    I m getting a problem while creating dtp
    After activating DTP and selecting the execute button, I am getting the following error message:
    Request cannot be processed in its current state
    Messg no : RSBK209
    can anyone help me on this problem
    Thank

    Hi Deepthi,
    Also check the error message(long text) and paste it here...
    check if you are either creating a "second" Delta DTP ( if an existing Delta DTP exists, then system will not allow you create a second DTP) and will throw an "overlapping" error
    Hope this helps
    Thanks
    Kalyan

  • Problems while creating Web Services in development server

    Hello,
    We are facing problems while creating Web services . The transaction like WSADMIN, WSCONFIG are not there in development server. Its gives message u2018This transaction is obsoleteu2019.
    Due to this while creating Webservice, there is and error message . Kindly guide me whats needs to be done.
    We have also tried the transaction WSADMIN2 as suggested by SAP, but didnu2019t know wat needs to be done.
    Regards,
    Rachel
    Edited by: Rachel on Feb 3, 2009 9:15 AM

    Hi,
    With your help, we were configuring WEB Service through soamanger.Due to some problem, we couldn't proceed further.Kindly guide us with the further steps.
    *steps followed *
    Step 1 : Entered Service Registry Parameters in WSPARAM .
    Step 2 : In transaction SOAMANAGER->Technical Configuration -->System Global settings
    Step3 : From u2018SE80u2019 transaction, selected the package ZHR and then right clicked to create the enterprise service -> Client Proxy (Service Producer)
    We have followed steps in se80.Don't know how to proceed further.
    We are unable to find the service in soamanger .How to find the service name in soamanager?
    Regards,
    Rachel
    Edited by: Rachel on Feb 3, 2009 12:38 PM
    Edited by: Rachel on Feb 3, 2009 12:48 PM

  • Problem while creating Service order

    Hi Gurus,
    I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
    So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
    But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
    Can anyone explain me this?
    Is this something that one can explain?
    Regards,
    Murugesh R
    Rewards for value replies.

    Hi Murgesh,
    If GL code is not getting bydefault from the system it is needed to be provided by the user.
    If normally one GL is there or other than master data services if single GL is there u can set that in SPRO.
    it is avalible in deafult settings in order node
    If you are creating the order with refrence to PR then it will take account assignement as "F" system will pick up all the details from PM module. This is the integration of MM & PM module.
    But if your PO is not w.r.t. PM orders PR then needs to be given manully.
    Ramesh
    Edited by: RameshChandra  Soni on Jul 25, 2008 8:16 AM

  • Problem while creating script form - lang EN is not available in client 800

    Hi friends,
    I getting a problem while creating a script form in SE71.
    if I give the name of the script (zform1) and clicked on create then its giving an information message like " Form ZFORM1 language EN is not available in client 800".
    But if I use this form in the abap program its giving stop message "Form ZFORM1 language EN is not active and has no errors" and the control is coming out of the program.
    What could be the problem and how to solve it friends . Please help me.
    Thanks
    -Hima

    Hi There,,
    By default all the forms will be there in client 100, if you are using the exisiting form and making a Z copy of the same,, then first you will have to copy from the client 100 to 800.
    If you are creating the form right from the scratch,, you will that message,,but need now worry about that..
    go head and create the Zform, don't forget to activate the form, before calling in the driver program.
    In the driver program,, call the function modules to invoke the form and activate the driver program as well. then you are all set/
    Thanks-
    Rahul

Maybe you are looking for