Problem while Creating IBase from WEB UI
Hi,
I am trying to create a New Ibase from WEB UI. But, alwayz the IBase category is defaulting to "Functional Location" and this field is not in Editable mode also.
So, I am not able to create the Ibase with any other categories.
Please do suggest to solve this issue.
Thanks,
Sandeep
HI,
Check the settings in SPRO path:Customer Relationship Management ->Master Data ->Installed Base ->Installed Base Category ->Define Installed Base Category and Installation Rules .
Here for the Ibase category which you want to maintain chech the Maint rule.It should be set to "Maintenance Allowed Using Installed base Management"
I think currently only for Ibase category FL this setting is maintained thats the reason its taking as default.
Regards,
PP
Similar Messages
-
Problem while creating PO from SO for a Variant configurable material
Hi
i am facing a problem when i am creating a Purchse order from a Sales order.
the material is a variant configurable material and we are creating a Sales order in Future date say in june.
For one of the materials in the SO the configuration is different today and the configuration is different in June.
Today the BOM contains different materials and in june there is a different bom for the material.
and according to my understanding the BOM gets exploded on the basis on the delivery date in SO.
here on the basis of the config which is valid in june materials are getting picked and that is correct.
when i try to creat a PO out of that SO i could see that the BOM gets exploded and correct materials are picked but i get the error message that inforecord for one of the componentes is not there.
but that component is not getting selected in the config..and it is not there in BOM in june.
It is there in the BOM today but not in JUNE.
I dont understand why the system is refering to that componeent and throwing this error
please help
Thanks & Regards
sarikaYou may try creating two BOMs -- one speicfic to the date of order.
Sanjeev -
Have problem on creating pdf from web page
When acrobat finished downloading of that web page to start creating pdf file, acrobat.exe take more and more memory, eventually the whole physical memory and OS prompt memory inefficient warning.
the web page is only 900+K,
url is http://www.w3.org/TR/2004/REC-xmlschema-1-20041028/ ( I use the only one layer configuration)
but url: http://www.w3.org/TR/2004/REC-xmlschema-0-20041028/ is turn out to be fine, which is 300+K
it seems when the web pages is more than some hundreds of KB, then the acrobat went insane and took all the memory out there.
Please fix the bug asap!
PS: I use acrobat pro 9.4.1Adobe only provides security fixes for all versions. With Acrobat X out, you will see any bug fixes. I don't have the problem you are seeing on 9.4.1 on the Mac nor on Acrobat X under Windows. I no longer have Acrobat 9.4.1 on my Windows machine, so I cannot check. Perhaps someone else can. Methinks you are seeing something else going one. Perhaps something is interfering with the pdf creation. What OS do you have? Maybe it has something to do with virus/spam software on your computer. Can you turn this off for testing purposes?
-
Problem while creating TP from Deals
Hi All,
when I create a Trade promotion from deal,all the data from deal is transferred to TP .But when I check Customer investments tab (Discount tab)I see the trade spend which I entered in deals are not transferred to Trade promotion correctly,the spend values are becoming zero by default in TP of Deal.
I will be thankful if anybody can tell what are the possible reasons for this error.
Thanks in advance
regards,
RamaniHi All,
when I create a Trade promotion from deal,all the data from deal is transferred to TP .But when I check Customer investments tab (Discount tab)I see the trade spend which I entered in deals are not transferred to Trade promotion correctly,the spend values are becoming zero by default in TP of Deal.
I will be thankful if anybody can tell what are the possible reasons for this error.
Thanks in advance
regards,
Ramani -
Creating chart from web part sharepoint 2013 online
hello, my name is peter and i know to solve the problem with creating charts from web part . i am familiar with excell services, but it doesnt solve my problem because it is not taking data from web parts so it is static. Thank you for your time
If you want info about creating charts in web parts, this one is quite nice:
http://social.technet.microsoft.com/wiki/contents/articles/17614.adding-charts-to-standard-webparts-and-visual-webparts.aspx
If you're worrying about getting data from another web part, you need to use web part connections and start here:
http://msdn.microsoft.com/en-us/library/ms469765(v=office.14).aspx
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com -
Problems while creating Web Services in development server
Hello,
We are facing problems while creating Web services . The transaction like WSADMIN, WSCONFIG are not there in development server. Its gives message u2018This transaction is obsoleteu2019.
Due to this while creating Webservice, there is and error message . Kindly guide me whats needs to be done.
We have also tried the transaction WSADMIN2 as suggested by SAP, but didnu2019t know wat needs to be done.
Regards,
Rachel
Edited by: Rachel on Feb 3, 2009 9:15 AMHi,
With your help, we were configuring WEB Service through soamanger.Due to some problem, we couldn't proceed further.Kindly guide us with the further steps.
*steps followed *
Step 1 : Entered Service Registry Parameters in WSPARAM .
Step 2 : In transaction SOAMANAGER->Technical Configuration -->System Global settings
Step3 : From u2018SE80u2019 transaction, selected the package ZHR and then right clicked to create the enterprise service -> Client Proxy (Service Producer)
We have followed steps in se80.Don't know how to proceed further.
We are unable to find the service in soamanger .How to find the service name in soamanager?
Regards,
Rachel
Edited by: Rachel on Feb 3, 2009 12:38 PM
Edited by: Rachel on Feb 3, 2009 12:48 PM -
Problem while Creating the LEAD through WEB UI
Hi,
I am trying to create Lead from WEB UI. But, it is asking Sales Rep., but I am not able to find that field in the WEB UI.
And In the Status field, I am able to See only 2 statuses, "Open" and "In Process". I am not able to see any other status like "Rejected By Sales" and "Closed".
Can you please let me know the reason for this. Do we need to do any configuration or Coding Related , to achieve this.
Thanks,
SandeepHi,
You can enter partners (Sales Rep) in Lead in assignment block Parties involved , for additional status check your status profile attached to transaction lead, also check lowest and highest value in status profile.
Regards,
Dipesh. -
Problem while selecting BELNR from BSEG
Hi Experts,
I have a report performance problem while fetching BELNR from BSEG table.
I have to print latest BELNR from BSEG where BUZID = M but at the time of execution of report, It is taking too much time (More that hour and sometimes it gets hanged).
I have also gone through the comments provided by experts for previous problems asked in this forum e.g. BSEG is a cluster table that is why data retrieval takes long time etc.
Can any one has any other idea or suggestion or any other way to solve this problem
Regards,
NeerajHi,
1) Try to create an index on BUZID field
2) Don't use SELECT/ENDSELECT statement. Instead of that extract all the concerned entries from BSEG into an internal table :
select belnr from bseg appending table itab where buzid = 'M'.
then do this :
sort itab by belnr.
describe itab lines n.
read table itab index n.
Please reward if helpful.
Regards,
Nicolas. -
Error while creating DTP from DS to Infoobject
Dear All,
I am getting one error while creating DTP from Datasource to Info object can any one give some suggetion regarding this issue.
Issue:Enter a valid value
Msg No:00002
Procedure: Display the allowed values withF4 and correct your entry,
Regards,
SatyaHi Satya,
Trying logging off the system and log in again and try to activate Data source Infoobject and transformation again and try creating DTP by selecting Selecting the source system by pressing F4. I hope it should work.
I don't find any specific problem or any patch problem with the error you are getting.
Hope it helps !
Regards,
Rose. -
Error has come while creating USER from SU01
Dear Expert,
I have got typical error while creating user from T-Code SU01.
Problem is like that : I suppose to use SU01 and "User Maintanace: Initial Screen
has come. Now I put the new user name like ABAP2008 or FI2008 (what ever the name thats hardly matter) and click on CREAT button then next screen Maintain User has been appeared.In this screen Address TAB is on and asking for fillup all the required user information.So I have been made all information like :First name /Last name /Tele ph/Fax / email etc etc. After complete this tab when I clicked on next tab is called "LOGON DATA, it has been given a error "Specify a valid country indicator
Message no. T5027" . Even thogh I didn't able to go to next screen LOGON DATA.Because of these problem I doesn't able to creat a user.
SAP : IDES version ECC 6
DB:SQL2005
OS: Windows 2003 server
Please do the needfull
Thanks & Regards
PavelHey Pavel,
Are you using ECC with ISU.. ? I am not sure but I feel your issue can be solved with information provided in SAPnote,
Note 1046566 - EC70: address-independent telephone number no country.
The system does not transfer any country from the master data template with the address-independent telephone number. The system issues the warning message T5027 "Specify a valid country indicator".
All the best ! -
Password Violation error while creating users from Admin interface
Guys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
VijayGuys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
Vijay -
Hi, I am facing an issue while creating a new web part page (Safeunit.aspx) within a folder (Safematic Seal Support Systems) located under a Document Library (Product Information Documents).
The path I am explaining:
Going to the Document Library (Product Information Documents) --> now inside that, clicking on a folder (Wet Seal Support
Systems) --> now inside the folder clicking on another sub-folder (Safematic Seal Support Systems) --> Here I want the web page Safeunit.aspx
Issue is that when I reach to the required destination, and want to create the web page by clicking on 'Site Action' --> 'Create' --> 'Web Part Page', now while selecting the Document Library name from the drop-down list, I do use 'Product
Information Documents' since the folder is inside this library only; but that create the page directly under the 'Product Information Documents' library, not under the sub-folder (Safematic Seal
Support Systems).
FYI, it is SP2007 version.
Kindly assist in this. Thanks in advance.I see that you have the namespaces reference in your code.
I think you have changed the NameSpace name of your code to CreateSPFolder, change the reference in all your manifest, and other files to point to the current namespace name. It should help.
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you -
Problem while Creating MVLOG with synonym in Oracle 9i:Is it an Oracle Bug?
Hi All,
I am facing a problem while Creating MVLOG with synonym in Oracle 9i but for 10G it is working fine. Is it an Oracle Bug? or i am missing something.
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
2 REFRESH ON DEMAND
3 WITH PRIMARY KEY
4 AS
5 SELECT name,id
6 FROM syn_t;
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
2 WITH PRIMARY KEY
3 (name)
4 INCLUDING NEW VALUES;
Materialized view log created.
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE 9.2.0.6.0 Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
REFRESH ON DEMAND
WITH PRIMARY KEY
AS
2 3 4 5 SELECT name,id
FROM syn_t; 6
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
WITH PRIMARY KEY
(name)
INCLUDING NEW VALUES; 2 3 4
CREATE MATERIALIZED VIEW LOG ON MV_t
ERROR at line 1:
ORA-12014: table 'MV_T' does not contain a primary key constraintRegards
Message was edited by:
Avinash Tripathi
nullHi Nicloei,
Thanks for the reply. Actually i don't want any work around (Creating MVLOG on table rather than synonym is fine with me) . I just wanted to know it is actually an oracle bug or something else.
Regards
Avinash -
Problem while creating URL iview (in EP7.0)
Hi,
I encountered a problem while creating URL iview (in EP7.0) as when I selected the iview template for creating the URL iview, the content area got displayed as
"No templates to display. You are not assigned to any existing templates."
please assist me in this regard.
Thanks,
SuriHi Manoj,
Thank you for your reply.
I am still getting the same messages even after creating the iview template in EP7.0
Created through:
content Admin --> portal content --> <folder>new --> iview --> seleting "Portal component - create an iView from a portal component contained in a deployed portal archive (PAR file)" <next> --> seleting "com.sap.portal.appintegrator.sap" <next> --> webdynpro <next> --> finish.
Open object for editing...--> Object is a Template to Yes.
Result :
content Admin --> portal content --> <folder>new --> iview --> seleting "iview template- create an iView from an existing iView template" <next> which displays the same message.
"No templates to display. You are not assigned to any existing templates."
Rgrds,
Suri. -
Problem with creating pdf from Microsoft Publisher 2013
We are having problems in creating pdfs from Microsoft Publisher2010- When the function 'Adobe PDF' is selected and 'Print' is clicked on nothing happens. The progress bar just sits there for several minutes without creating a pdf. We have to click on cancel and when this is done this crashes Microsft Publisher.
I have repaired this using the repair facility in Acrobat 9. I have also uninstalled Acrobat 9 and reinstalled this.
I have also uninstalled Adobe Reader XI and reinstalled Adobe Reader 9.
Before uninstalling Acrobat I also ran the updates but this didnt help either.
This is on a Windows 7 PC (64-bit)
Adobe Acroabt 9 Pro Extended
Microsoft Publisher 2010.
Any help is appreciated.
ThanksMS Publisher 2010 is not supported by the Acrobat 9 Family; and the PDFMaker extension for Publisher has been removed completely from the Acrobat XI Family, so upgrading won't help either. Sorry!
See http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html#main_ PDFMaker_compatible_applications
Maybe you are looking for
-
Help needed Regarding Purchase requistion
Hi all, I HAVE CODE WRITTEN BY SOMEBODY ELSE FOR CREATION OF REQUISTION using FM BAPI_REQUISITION_CREATE. Right now iam working on it. He has passed some inputs to the FM in program and is creating a requistion. When i check that requistion in me53n,
-
Can I get my money back? (UK)
Hi all, I'm hoping for advice here. I live in the UK, so I could do with knowing what my rights are here. Anyway, here is the situation: I own an Apple Cinema Display 20. It is less than a year old. I really dislike it, and I would like my money back
-
Illustrator Layers are expanded when opening.
I haven't had much luck googling this, because I am not certain of the proper terminology to ask the question. When I open a file, one or more layer are opened/expanded in the layer tab on the side of the screen. I can close the layer, make modifica
-
My husband and I did the most recent update. Now when we send messages to each other we also receive a duplicate of the message to ourself, what did we do wrong?
-
iam looking for the manaul or something that would show how to replace the keyboard?