Problem while creating multiple tabs dynamically webdynpro abap
Hi Experts,
i am trying to create multiple tabs in tabstrip dynamically but the tabs are hiding behind one other..
Let me know how to fix this.
Thanks
Abdul Hakim
Are you expecting from expert only?Sorry I am not a expert,
About issue:...
I think number of tabs will display that depends on the width of the container.. As of now how many tabs you have and hw many displaying at a time...
Please increase width ofyour container and check and let me know.
Its just a try not a solution.
Regards
`srinivas
Similar Messages
-
Updation problem while creating multiple objects from enterprise portal
Hi All,
From enterprise portal i am calling an RFC 'BAPI_PROJECT_MAINTAIN' to create objects .
While trying to create multiple objects simultaneously it gives error "sapuser is currently using, can't be created".
It seems like as i am creating multiple objects by calling RFC repeatedly , while the first one is not updated fully i am sending the second value to be processed.
Pl. tell me how to overcome this. Do I need to add any sleep time in EP or any other method is there in SAP to overcome this situation.
thanks
sandeepDear Sandeep,
I have discussed this problem with EP team lead in my organisation, i have given your email id to him he will forward the solution on your id.
If usefull reward points helpfull....
Regards,
Rajneesh Gupta -
Problem while creating URL iview (in EP7.0)
Hi,
I encountered a problem while creating URL iview (in EP7.0) as when I selected the iview template for creating the URL iview, the content area got displayed as
"No templates to display. You are not assigned to any existing templates."
please assist me in this regard.
Thanks,
SuriHi Manoj,
Thank you for your reply.
I am still getting the same messages even after creating the iview template in EP7.0
Created through:
content Admin --> portal content --> <folder>new --> iview --> seleting "Portal component - create an iView from a portal component contained in a deployed portal archive (PAR file)" <next> --> seleting "com.sap.portal.appintegrator.sap" <next> --> webdynpro <next> --> finish.
Open object for editing...--> Object is a Template to Yes.
Result :
content Admin --> portal content --> <folder>new --> iview --> seleting "iview template- create an iView from an existing iView template" <next> which displays the same message.
"No templates to display. You are not assigned to any existing templates."
Rgrds,
Suri. -
Reg:working with multiple windows in webdynpro-abap
Hi ,
How can we create multiple windows and how can we link them...
suppose we have 3 fields on first screen .how to move the data from the first screen to second screen..
Thanks & Regards
Suman PuthadiHi
As per your Subject you are looking for "working with multiple windows in webdynpro-abap" and for abap there is a different forum. Web Dynpro ABAP
Hope its clear to you...
Even you can read this post when ever you get time Read before posting
Regards
Ayyapparaj -
Problem while creating sales order
Hi
We are facing a problem while creating a sales order in R/3. The sales order number is getting generated. But we are not able to view the same in the backend meaning it is not there in the database. Any inputs would be of help.
regs
SteveHi everybody,
I've got a problem with this too. I use the BAPI_SALESORDER_CREATEFROMDAT2 with BAPI_TRANSACTION_COMMIT and the webdynpro shows me the document number created in R3 with a Success message. But when I go to R3 and try to display the created sales order, it doesn't exists. So... Maybe I'm doing something wrong with the BAPI_TRANSACTION_COMMIT. ¿Can anybody help me with this?
The code I use is this:
When the user pushes the SAVE button in the WebDynpro, this code executes:
//@@begin onActionSave(ServerEvent)
wdThis.wdGetSOCreaCustController().executeBapi_Salesorder_Createfromdat2();
wdThis.wdGetSOCreaCustController().executeBapi_Transaction_Commit();
//@@end
In the custom Controller I've got the code for those executions:
public void executeBapi_Salesorder_Createfromdat2( )
//@@begin executeBapi_Salesorder_Createfromdat2()
try {
wdContext.currentBapi_Salesorder_Createfromdat2Element().modelObject().execute();
catch (Exception ex) {
wdComponentAPI.getMessageManager().reportException(ex.getMessage(), false);
wdContext.nodeOutput().invalidate();
//@@end
public void executeBapi_Transaction_Commit( )
try {
wdContext.currentBapi_Transaction_CommitElement().modelObject().execute();
catch (Exception ex) {
wdComponentAPI.getMessageManager().reportException(ex.getMessage(), false);
wdContext.nodeOutput().invalidate();
//@@end
¿Is something wrong? ¿Is something missing? -
Problem while Creating Service order through Work Order
Hi Gurus,
I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
Can anyone explain me this?
Is this something that one can explain?
Regards,
Murugesh R
Rewards for value replies.Closed..
-
Problem while creating Service order
Hi Gurus,
I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
Can anyone explain me this?
Is this something that one can explain?
Regards,
Murugesh R
Rewards for value replies.Hi Murgesh,
If GL code is not getting bydefault from the system it is needed to be provided by the user.
If normally one GL is there or other than master data services if single GL is there u can set that in SPRO.
it is avalible in deafult settings in order node
If you are creating the order with refrence to PR then it will take account assignement as "F" system will pick up all the details from PM module. This is the integration of MM & PM module.
But if your PO is not w.r.t. PM orders PR then needs to be given manully.
Ramesh
Edited by: RameshChandra Soni on Jul 25, 2008 8:16 AM -
Problem while creating script form - lang EN is not available in client 800
Hi friends,
I getting a problem while creating a script form in SE71.
if I give the name of the script (zform1) and clicked on create then its giving an information message like " Form ZFORM1 language EN is not available in client 800".
But if I use this form in the abap program its giving stop message "Form ZFORM1 language EN is not active and has no errors" and the control is coming out of the program.
What could be the problem and how to solve it friends . Please help me.
Thanks
-HimaHi There,,
By default all the forms will be there in client 100, if you are using the exisiting form and making a Z copy of the same,, then first you will have to copy from the client 100 to 800.
If you are creating the form right from the scratch,, you will that message,,but need now worry about that..
go head and create the Zform, don't forget to activate the form, before calling in the driver program.
In the driver program,, call the function modules to invoke the form and activate the driver program as well. then you are all set/
Thanks-
Rahul -
Lost ability to create multiple tabs
I've been able to create multiple tabs by clicking the "plus" sign at the right of the current tab. Haven't been able to do that for some reason. I usually create several tabs so I can view several sites by clicking any tab.
Yes, just recently upgraded, so I got confused about the QT/FCP movie.
Thank you.
In terms of the print to tape, I selected the file and went print to tape from
the created QT movie. Only small problem were two very small audio pops
on the tape that don't exist on the QT movie. Could it be a dirty deck head
or is there something I'm not doing?
Either way, thank you both for your help.
;h -
Problem while creating WBS elements using LSMW
Hello experts,
I am able to create Project Definitions using LSMW. (using recording)
But there is a problem while creating WBS elements.
Tcode CJ20 has table control and that will become problem for multiple rows (levels).
Can anyone suggest a solution to mass upload WBS elements?
Thanks for your valuable advice.Hi,
Instead of using "BAPI_PROJECT_MAINTAIN", use following solution. We are using this solution and it is working pretty good.
If the WBS element is already created and you want to create one more with same data, first get the WBS related information using BAPI_PROJECT_GETINFO as you are doing currently.
I am using different sets of BAPIs to create project, create / change WBS element.
I use function module from Function group CJ2001 ( Project related BAPIs ), CJ2054 ( WBS related BAPIs ) and PS_BAPI ( pre/post processing BAPIs ). There are specific order in which you need to execute these BAPIs.
For example if you want to create / change the WBS element, the BAPIs sequence is:
<b>1. BAPI_PS_INITIALIZATION
2. BAPI_BUS2054_CREATE_MULTI ( to create WBS )
or
2. BAPI_BUS2054_CHANGE_MULTI ( to change WBS )
3. BAPI_PS_PRECOMMIT
4. BAPI_TRANSACTION_COMMIT</b>
Check the documentation of BAPI "BAPI_BUS2054_CREATE_MULTI " to see how these function modules work.
Let me know if you need further information.
Regards,
RS -
Problem while Binding multiple Parameters to View Object[Solved]
Hello,
I am facing problem while binding multiple parameters with different data types in View Object query. For example suppose I have following query in my view object.
SELECT Header.ADDED_BY
Header.BATCH_ID,
FROM BATCH_HEADER Header
WHERE :1='deptAdmin' and Header.BATCH_ID
in
select batch_id from batch_header_dept_mapping where dept_id in(SELECT * FROM TABLE(CAST(:0 AS TABLE_OF_VARCHAR)))
I am able to pass the Bind variables of Array type for : 0 , using Steve's ArrayOfStringDomain example. (ArrayOfStringDomain) .
But after passing value to second bind parameter ie.. :1 .
I am getting the error as follows.
## Detail 0 ##
java.sql.SQLSyntaxErrorException: ORA-00932: inconsistent datatypes: expected - got CHAR.
I tried to set
setWhereClauseParam(1,11); // 11 is Number
setWhereClauseParam(0,arr); // arr is arr = new Array(descriptor,conn,deptid); for in parameter.
But of no use , Please let me know if any thing missing form me or have any another solutions. Also please provide me any example if have.
Thank you,
Sandeep
Edited by: user11187811 on Oct 23, 2009 7:27 AM
Edited by: user11187811 on Oct 26, 2009 12:52 AM
Edited by: user11187811 on Oct 26, 2009 6:51 AMhi.
but when using non-Oracle named parameter binding styles as you've done (ie. , :1), regardless of what number you give each bind variable, they are sequenced 0, 1, 2 etc. As such your bind variable :1 is the 0th parameter, and your bind variable is the 1st parameter.Your statment is correct.
:1 i used was actually on 0th position and :0 was on 1 position. Like you said in sequence 0,1,2 etc. Now i get the answer and i corrected My mistake by assigning right values to right binding variable. and problem just solve.
Thanks Chris. -
How to create multiple tabs of report in 1 crystal report file
Hi,
Is there any feature in Crystal report 2008 on creating multiple tabs of report similar to Web-I?
If there is, could you give me help on this.
Thank you in advance.
RoseHi Rose,
I think we cant achive the same functionality in Crystal Report designer.
Regards,
Shweta -
Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!
Have you checked out the topics at the right in the More Like This section?
OT -
Problem while Creating MVLOG with synonym in Oracle 9i:Is it an Oracle Bug?
Hi All,
I am facing a problem while Creating MVLOG with synonym in Oracle 9i but for 10G it is working fine. Is it an Oracle Bug? or i am missing something.
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
2 REFRESH ON DEMAND
3 WITH PRIMARY KEY
4 AS
5 SELECT name,id
6 FROM syn_t;
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
2 WITH PRIMARY KEY
3 (name)
4 INCLUDING NEW VALUES;
Materialized view log created.
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE 9.2.0.6.0 Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
REFRESH ON DEMAND
WITH PRIMARY KEY
AS
2 3 4 5 SELECT name,id
FROM syn_t; 6
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
WITH PRIMARY KEY
(name)
INCLUDING NEW VALUES; 2 3 4
CREATE MATERIALIZED VIEW LOG ON MV_t
ERROR at line 1:
ORA-12014: table 'MV_T' does not contain a primary key constraintRegards
Message was edited by:
Avinash Tripathi
nullHi Nicloei,
Thanks for the reply. Actually i don't want any work around (Creating MVLOG on table rather than synonym is fine with me) . I just wanted to know it is actually an oracle bug or something else.
Regards
Avinash -
Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ...
Maybe you are looking for
-
Incrementally appending custom XMP metadata into PDF files
I have a problem writing custom XMP metadata into a PDF document (I'm using the XMP Toolkit SDK). The problem is that I don't know whether is possible to expand the XMP packet in order to append metadata incrementally into the document, and, if it is
-
I have followed the directions given on the Apple support pages and the ones provided in this community, but they do not match with what I get from the Airport Utility. According to the dorections, after starting a soft restart on the Airport Extreme
-
How do erase a Flash drive that erroneously has the administrator's rights as read only?
I have a 64GB Flash drive that needs to be repaired, but I cannot repair it because it shows that I have read-only permissions. I am the administrator and no one else has ever touched this drive. What gives? I am running Mountain Lion. Thanks.
-
Does the Mac mini take mini DVD-Rs, like those in Panasonic camcorders?
Do they fit in the slot and come out? They're half-size, and I thought maybe it wouldn't go in right. Any tips before I try it?
-
ID5: Table cell strokes &!^@)ed up
I'm trying to add a stroke to the top and bottom of a selection of cells. Sometime it works, sometimes it adds the stroke too all sides of all cells in the selection. What's going on? Even it I select just the bottom row and try to stroke the bottom