Problem while  data processing TRANSACTION data from DSO to CUBE

Hi Guru's,
we are facing problem while  data processing TRANSACTION data from DSO to CUBE. data packets  processing very slowly  and updating .Please help me regarding this.
Thanks and regards,
Sridhar

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (give BIrequest name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.
You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the cube.
Thanks,
JituK

Similar Messages

  • Data is not uploaded from dso to cube

    Dear Experts,
    In one of my process chains uploading of the data is taking place from dso to the cube through DTP.
    But only data in data package 1 are transfeered .
    The data gets stuck up in data package 2 and data package 3 so the request remains in yellow state only.
    Please suggest.

    Dear All,
    As per ur issue, try to check the following,
    1) Check the short dump is there are not in SM12.
    2)If found then try to load manually  the packet2 and 3 , (we have got an option on the right most corner to load them manually).
    3) if 1 & 2 are unsuccessful, try to keep an option of PSA and load the data again.
    kindly let me know if you have any issues.
    Thanks and Kind Regards,
    Saisandeep.

  • Data is not updating from DSO to CUBE

    Hi Friends,
    Can any one please Guide me.
    Data is updating upto ODS but not from this lower level ODS to top of the  cube from last  week and displaying error as " Exception condition "DATE_INVALID" raised" .
    How i can proceed to find which date field is getting wrong date or not getting date ..Can any body tell that how we can analize the possibilities in this case to find the error and solution .I need to solve this today,Can any body guide me please.
    BR,
    Venkat

    hi
    check the transformations between dso and cube, and check any inconsistence. if not then follow the link
    http://www.consolut.com/en/s/sap-ides-access/d/s/doc/F-DATE_CONVERT_TO_FACTORYDATE
    this may help you.

  • Unable to load data from DSO to Cube

    Good morning all,
    I was trying to load data from DSO to Cube for validation. Before loading the new data, I deleted all from DSO and Cube. They contain no request at all. Cube has "Delta Update". First DSO was loaded 138,300 records successfully. Then Activated the DSO. The last when I clicked Exectue (DSO --> Cube), it loaded 0 record. I was able to load the data yesterday. What might be the reasons for this situation?
    Thank you so much!

    Hi BI User,
    For loading delta upload into the data target, there should be an initialization request in the data target with same selection criteria.
    So..first do the initialization and perform delta upload into the cube.
    Regards,
    Subhashini.

  • Data problem from DSO to cube

    hi
    i am facing data from problem from dso to cube
    i am getting daat into dso
    plant   material  doc_num  itemno  qty
    p1      m1           1              1         10
    p1      m1           1               2         20
    dso i am uisng key fields
    doc_no
    item_no
    doc_year
    data fields
    material
    plant
    qty
    while loading data into cube
    its showing only
    p1 m1 1 2 20
    item 1 is missing
    there is no iten num filed in my target field?
    ple let me know ur idea.

    Hi,
    The problem is in your ODS/DSO.
    In your ODS you have 'Doc_num' as key field.
    For both Items 1 & 2, you have same key field ( Doc_Num) Value.
    So, the first record will be over written by the second one. So from your ODS you will get only the latest record to the Cube.
    If you want to send both doc_nums to cube, you need to bring doc_num to the data fields area of ODS.
    Hope this helps.
    Cheers
    Praveen

  • Error while loading data from DSO to Cube

    Dear Experts,
    I have change update routines of the update rule for DSO & update rule between DSO & cube. when i uploading data in DSO , working fine. But when uploading from DSO to cube , it giving error.
    Error Message :
    DataSource 8ZDSO_ABB does not have the same status as the source system in the Business Information Warehouse.
    The time stamp in the source system is 30.09.2010 14:05:17.
    The time stamp in the BW system is 09.05.2008 16:41:10.
    I executed program RS_TRANSTRU_ACTIVATE_ALL , still giving same error.
    Regards,
    Anand Mehrotra.

    Dear Experts,
    Thanks for help.Problem solved.
    Regards,
    Anand Mehrotra.

  • Semantic Partitioning Delta issue while load data from DSO to Cube -BW 7.3

    Hi All,
    We have created the semantic partion with the help of BADI to perform Partitions. Everthing looks good,
    first time i have loaded the data it is full update.
    Second time i init the data load. I pulled the delta  from DSO to Cube . DSO is standard where as Cube is partition with the help of semantic partition. What i can see is the records which are updated in Latest delta are shown into the report rest all are ignored by the system.
    I tried compression but still it did not worked.
    Can some has face this kind
    Thanks

    Yaseen & Soujanya,
    It is very hard to guess the problem with the amount of information you have provided.
    - What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
    - How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
    - Is there data already in the InfoCube?
    - Is there change log data for DSO or did someone delete all the PSA data?
    Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
    Good luck.
    Sudhi Karkada
    <a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a>

  • While loading data from DSO TO CUBE.(which Extraction option)

    hi friends,
                     my questin is that when we load the data from one data target to another data target then we have four options to extract the data in DTP screen from (1.active data table (with archive) 2.active data table (without archive) 3.change log table. and fourth i dont remember.so my question is when we update data like from DSO TO CUBE. Then which option we should choose. 2nd or 3nd.?
    <removed_by_moderator>
    Edited by: Julius Bussche on Jan 4, 2012 9:26 AM

    - If you want to do a full load always select 2nd option i.e. Active Data Table (without archive).
    - If you wand to do a delta load, you can select either of 2 or 3
       Active Data Table (without archive) - first load will be full from active table and after that it will be delta from change log
       (ii) Changelog table - you will have to do a full load using a full DTP and then delta can be done using this DTP (but you will need to an init as well using this DTP)
    - if you have done using a full DTP and now just want to run delta, select 3rd option and do an init before running delta
    I hope it helps.
    Regards,
    Gaurav

  • When I extracting data from DSO to Cube by using DTP.

    When i am extracting data from DSO to Cube by using DTP.
    I am getting following erros.
    Data package processing terminated (Message no. RSBK229).
    Error in BW: error getting datapakid cob_pro (Message no. RS_EXCEPTION105).
    Error while extracting from source 0FC_DS08 (type DataStore) - (Message no. RSBK242).
    Data package processing terminated. (Message no. RSBK229).
    Data package 1 / 10/04/2011 15:49:56 / Status 'Processed with Errors'. (Message no. RSBK257).
    This is the brand new BI 7.3 system. Implementing the PSCD and TRM.
    I have used the standard business content objects in FI-CA (dunning history header, item,activities) and standard Datasource (0FC_DUN_HEADER ,0FC_DUN_ITEMS, 0FC_DUN_ACTIVITIES). I have extracted data till the DSO level . when I try to pull the data to info provider level(cube) using DTP . I am getting fallowing error.
    my observation: when ever I use the DSO as source to any target like another DSO or cube. its throwing same kind of error for any flow including simple Flat file .
    please suggest any one whether do I need to maintain basic settings since its a brand new BI 7.3.
    please help me out on this issue . I am not able to move forward .its very urgent

    hello
    Have you solved the problem ?  
    I have the same error...
    as you solve this error,
    can you help me please I have the same error
    yimi castro garcia
    [email protected]

  • DTP load data from DSO to CUBE can't debug

    Hi,all expert.
    I met a problem yestoday.
    When I load data from datasource to DSO,and debug the start routine,it was ok.But when I load data from DSO to CUBE,and debug the routine,it got an error like this:
    inconsistent input parameter(parameter:<unknow>,value <unknown>)
    message no: RS_EXCEPTION 101.
    I don't know why,PLZ help me,thank you very much.

    Hi,
    An alternative way to do this is to have a small code for infinite loop in your start routine. And when you start the load goto SM50 and debug the process which is executing the load, from there you can close the infinite loop and carry on with the debugging. Please let me know if you require further information.
    Thanks,
    Arminder

  • Partial data loading from dso to cube

    Dear All,
    I am loading the data from dso to the cube through DTP. The problem is that some records are getting added  through data
    packet 1 to the cube around 50 crore records while through data packet2 records are not getting added.
    It is full load from dso to cube.
    I have tried deleting the request and executing DTP but again the same no of records get added to the cube through datapacket 1   and after that records are not added to the cube through datapacket 1  ;request remains in yellow state only.
    Please suggest .

    Nidhuk,
    Data load transfers package by package. Your story sounds like it got stuck in second package or something. Suggest you check package size, try to increase to a higher number to see if anything  changes ? 50 records per package kind of low, your load should not spread out into too many packages.
    Regards. Jen
    Edited by: Jen Yakimoto on Oct 8, 2010 1:45 AM

  • Issue when uploading Sales data from DSO to Cube.

    Dear All,
    I have an issue when I am uploading Sales data from DSO to Cube.  I am using BI 7.0 and I have uploaded all sales document level data to my DSO.  Then I use a transformation rule to calculate the Sales Value when I am doing DTP to cube.  Cube has customer wise aggregation data.
    In DSO I have NetPrice(KF) and Delivered_QTY(KF).  I do a simple multiplication routine in the transformation from DSO to Cube.
    RESULT =   SOURCE_FIELDS-NET_PRICE * SOURCE_FIELDS-DLV_QTY .
    At the moment I use Active Table(With out Archive) on the DSO to get the data since this is my first load.
    Issue is that the figure (Sales Value) in the cube is incorrect. I am getting a very large values which is impossible.
    Can someone please help me.
    Shanka

    Hi,
    are you sure that cube has customer wise aggregated data..since it will always aggregate the values of the key figures for the same set of characters...
    did you checked the values for the key figures as well and if even they are inflated or is the problem with this key figure only.
    During the data load the records may aggregates first for the same values of characters and then multiplication will be happening....if that is the case then you may have to multiply the values before storing it in the data package and then let it aggregate....can be achived through start routine...
    but first verify if other key figures are also having the same issue.
    Thanks
    Ajeet

  • Data load from DSO to Cube in BI7?

    Hi All,
    We just migrated a dataflow from 3.5 to 7 in development and moved to production. So till now in production, the dataloads happend using the infopackages.
    a. Infopackage1 from datasource to ODS and
    b. Infopackage2 from ODS to the CUBE.
    Now after we transported the migrated dataflow to production, to load the same infoproviders I use
    1. Infopackage to load PSA.
    2. DTP1 to load from PSA to DSO.
    3. DTP2 to load from DSO to CUBE.
    step1 and step2 works fine but when I run the DTP2 it is getting terminated. But now when I tried the step b (above), it loads the CUBE fine using the infopackage. So I am unable to understand why the DTP failed and why the infopackage load is successful. In order to use the DTP do we need to do any cleanup when using it for first time? Please let me know if you have any suggestions.
    Please note that the DSO already has data loaded using infopackage.  (Is this causing the problem?)
    Thanks,
    Sirish.

    Hi Naveen,
    Thanks for the Reply. The creation of DTP is not possible without a transformation.
    The transformation has been moved to production successfully.

  • Regarding  Loading the data from DSO to cube.

    Hello Experts,
    I have DSO which loads data from psa  using 7.0 tranformation (using DTP).  And i have a cube which loads the data from that DSO using 3.x transfer rules. Now i have deleted the init request for a infopack before load the data into DSO. But when i load the data from DSO to cube by  right click on DSO -> click On Additional Functions -> update the 3.x data to targets, It is giving me an error like 'Delete init. request REQU_4H7UY4ZXAO72WR4GTUIW0XUKP before running init. again with same selection
    Please help me with this.
    i want to load the data in the init request to cube..
    Thanks

    Hi Shanthi,
    Thanks For reply. I have already deleted the init request from source system to DSO and then i have tried still i am getting the error.
    Thanks

  • Change Log Data from DSO to CUBE

    Hi Experts,
      Is it possible to load/transfer change log data as well from DSO to Cube
    Thanks

    Hi,
    Yes it is possible.
    Create a DTP from DSO to cube.
    In the extraction tab of DTP choose the option
    Datasource Change log
    Hope it Helps!!
    Reward if useful
    Manish

Maybe you are looking for