Problem while deploying app : An error occurred while contacting the subscription settings service

I am trying to deploy a provider hosted app.
According to various articles by MSDN, I have configured the app domain, the necessary services.
When I go on deploying the app, I get this error:
Error occurred in deployment step 'Install app for SharePoint': The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
I am not able to figure out where exactly the steps have gone wrong?
When checked with ULS Log Viewer, I am able to find the cause, which says
An error occurred while contacting the subscription settings service at 'http://spsite/795a076a57c543748c151b79ffc60e6c/SubscriptionSettings.svc/optimized'.

Hi,
I assume you have seen this article:
http://technet.microsoft.com/en-us/library/fp161236.aspx and that you created the Subscription Shared Service. Are you on the released version of SharePoint?
Try stopping and restarting the subscription service from central admin.
Cheers
Yina

Similar Messages

Error occurred. Contact the administrator and report the exception ID

Dear All,
We are on EP 7 SP8. We just now performed a system copy and are right now done with the post installation activities. All seems fine but we are having a problem in the Navigation Windown Quick Create link on the left hand side. Here I am always getting an error: Error occurred. Contact the administrator and report the exception ID in the log: 001A4B066A940068000001B500002946000433EB006CFEAC
Can someone please guide me with how to remove this error.
Please let me know as we are stuck and need to give the system to the client.
Thanks a lot in advance.
Best Regards,
Rajeet

Hello
Can you see the defaulttrace file for more details?
Open up Visual Administrator and go to Log Viewer. Then open up the Defaulttrace file. Generate the same error message and look in the file for more details.
What do you see?
And of course.. What did you do to make this error ?
Best Regards
Kristoffer Engh

I can't login from the desktop app - "Login error. Please contact the Admin."

1) Does anyone have the same problem as described below?
2) Does anyone know how to fix it?
When I try to "work online" from the desktop app, I get asked to log out of offline, then log into online. When I put in my username and password, it gives me the error "Login error. Please contact the Admin." I've clicked the link "Trouble logging in?" and followed instructions to reset my password, which I successfully reset to a new one. I still get the error.
I have a subscription to Adobe Story Plus and am working offline/online using the desktop app. I haven't logged in to sync my documents in about a month. My account is in good standing (paid 2 weeks ago according to my account transactions screen). I'm now trying to collaborate, so it's important that I be able to sync.
Any help would be greatly appreciated.
Thanks,
John

Hi Rohit,
Thanks for your response. I've resolved the problem myself, and you may be
interested to know how in case it happens again with another user - I
thought maybe it was a versioning discrepancy and I was right (I assume).
However, I couldn't update my desktop software (or I couldn't figure out
how to update it) until I rebooted my machine, then Story went into an
auto-update sequence.
After it updated, it logged in and sync'd just fine. Classic "help"
question where the answer basically was: reboot. I shouldn't tried that
before I posted!
I hope that helps.
Thanks,
John
On Mon, Jun 16, 2014 at 3:02 PM, Rohit (Story Team) <

An error occurred when loading the Cube ; Analysis services 2012

Hi All
We are facing issue on our SQL Analysis services 2012 (11.0.3381.0) on windows 2008 R2.
All cubes are not getting loaded on server. When we restart services some times 2/8 cubes some times 4/8 cubes and some times all cubes get loaded. We are not sure what could be reason for such in consistency. Below are the logs
Failed to load server plug-in extension defined in assembly System. The following error(s) have been raised during the plug-in initialization. Loading of the System assembly failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException;Could
not load file or assembly 'msmdspdm, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. Strong name validation failed. (Exception from HRESULT: 0x8013141A)
Strong name validation failed. (Exception from HRESULT: 0x8013141A). Enumeration of types or functions through reflection in managed code failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException.
OLE DB or ODBC error: Query timeout expired; HYT00.
LOGS :
(12/6/2013 7:45:12 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the Claim Industry Summary Metrics Current. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:42 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:44 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:45 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:55 AM) Message: Service stopped. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210001)
(12/6/2013 7:47:04 AM) Message: The Query thread pool now has 1 minimum threads, 40 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingShort thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingLong thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The Processing thread pool now has 1 minimum threads, 64 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x000000000000001f now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000003e0 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x0000000000007c00 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000f8000 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:11 AM) Message: The flight recorder was started. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210005)
(12/6/2013 7:47:11 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
Thanks
Saurabh Sinha
http://saurabhsinhainblogs.blogspot.in/

Hi Saurabh,
Please elaborate your scenario or OLAP Server environment with more detail. What's the method you used to load the SSAS cube?
For this issue, I would suggest opening a case with Microsoft Customer Support Services (CSS) (http://support.microsoft.com), so that a dedicated Support Professional can assist you in a more efficient manner.
Regards,
Elvis Long
TechNet Community Support

Book Module Error "Could not contact the Blurb Web Service"???

I have successfully used Lightroom in the past to upload a book with no problems. I'm currently running the most updated version of Lightroom v 5.6. I've just finished a new book and am getting the error message "Could not contact the Blurb Web Service. Check your internet connection." My internet connection is fine, my firewalls and anti-virus are turned off, I've restarted both Lightroom and my computer. Same problem.
My research has shown this is a very common problem, but all the forums I've found do not have answers on how to solve the problem. All the posts I've found about this problem are either unanswered or suggest things like turning off and turning back on "unchecking apply background globally" and other tips related to the background and text, or change the cover style back and forth, etc. None of these has worked for me.
I am ordering this book as a wedding album for a client and it is URGENT that I get the order uploaded within the next few days or I'm going to have to refund the clients' payment and lose the job, which would be extremely professionally embarrassing. I'm VERY frustrated and have very eager customers waiting. PLEASE HELP ASAP!!!
Janine Fugere
As Seen by Janine
www.asseenbyjanine.com

I solved the Lightroom Book Module problem of "Could not contact Blurb Web Service. Please check your internet connection."
With the help of Adobe Lightroom's telephone tech support, a very patient man named Himanshu helped me discover what was causing this issue, after researching the issue and calling me back. Nice touch Adobe! It was pleasant to be able to do other things while Himashu researched and consulted with other techs to find my solution.
As very many other people have reported in user forums, the problem was not that I didn't have an Internet connection.
The problem was caused by my PC's Windows 8 User Account Settings, which somehow had Internet Settings that conflict with the upload to Blurb from Lightroom. The Adobe Lightroom tech support person helped me create a new user account, and I am able to successfully upload to Blurb from Lightroom under the new account. We created a quick test book to try and it worked just fine under the new user account.
Not sure how this solution would translate for a MAC user (I've read of people with Mac computers getting the same upload error) but I advise checking your User Account's Internet Settings, whatever type of computer you are using.
The only minor glitch I still have is that my new Windows user account can't access any of my photo files (or any other files) from my old user account, even when I gave the new user account administrator access. I have a very large internal hard drive, so my photos & catalog are stored internally. The Lightroom tech support advised me to contact Lenovo (my computer manufacturer) for help to transfer all my files from my original user account to the new one I just created. I will do that very soon.
Meanwhile, my temporary workaround was to export my Lightroom Catalog and the photos I needed for this book onto an external hard drive, so I could access them from the new user account. My wedding clients' book has been successfully uploaded to Blurb!
I'm sharing so others with this problem uploading from Lightroom to Blurb may also find this solution works for them, too.

While deploying EJB, OutOfMemory error occurred

While deploying & re-deploying EJB many times(maybe over 100 times), in admin-server, OutOfMemory error occurred.
Actually 7~8 people deployed several EJBs remotely.
After I increased heap memory size to 1G of admin-server, interval was more longer, but anyway OutOfMemory error occurred. I should restart admin-server after that error.
Log message as follows::
=========================================
[18/Sep/2003:12:38:54] INFO ( 9510): ADM1041:Sent the event to instance:[ModuleDeployEvent -- redeploy ejb/rh34]
[18/Sep/2003:12:38:54] WARNING ( 9510): ADM1046:Notification failed
[18/Sep/2003:12:38:57] INFO ( 9510): ADM1058:Restarting the server instance : [rhlfInstance]
[18/Sep/2003:12:46:08] INFO ( 9510): ADM6002:Received remote administration request
[18/Sep/2003:12:46:11] SEVERE ( 9510): CORE4007: Internal error: Unexpected Java exception thrown (unknown exception, no description), stack:
java.lang.OutOfMemoryError
[18/Sep/2003:12:46:27] INFO ( 9510): ADM6002:Received remote administration request
[18/Sep/2003:12:49:58] INFO ( 9510): ADM6002:Received remote administration request
[18/Sep/2003:12:52:18] INFO ( 9510): ADM6002:Received remote administration request
[18/Sep/2003:12:52:18] SEVERE ( 9510): StandardWrapperValve[AdminAPIEntryServlet]: Servlet.service() for servlet AdminAPIEntryServlet threw exception
javax.servlet.ServletException: Servlet execution threw an exception
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:742)
at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:157)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:598)
----- Root Cause -----
java.lang.OutOfMemoryError

Repeated changes applied to any instance eventually results in an out of memory error.
The Admin Server keeps a record of all changes performed to the system, which requires memory. This change record (but not the changes themselves) is discarded during a reconfiguration, thus releasing the memory for use.
Use the asadmin reconfig command periodically to discard old change records which was being kept in memory.

Error occurred while deploying the solution

Hi All,
am getting the error while deploying Web part "Error occurred in deployment step 'Recycle IIS Application Pool': Invalid namespace" Please do the need full
Thanks in Advance

Hi,
According to your description, the error”
Error occurred in deployment step 'Recycle IIS Application Pool': Invalid namespace” occurs when you deploy the solution.
Is your operation system – Windows 7 ?
If yes, you need to enable WMI compatibility.
Open the
Turn Windows on or off menu in the Control Panel (under Programs)->
Internet Information Services -> Web Management Tools -> IIS 6 Management Compatibility -> IIS 6 WMI Compatibility.
There is a thread for the same issue:
http://stackoverflow.com/questions/3362914/exception-when-deploying-to-sharepoint-2010-from-visual-studio-2010
Feel free to reply if the issue still exists.
Best regards
Patrick Liang
TechNet Community Support

Error while deploying app - matching end-tag " /web-app "??

Hi,
I am trying to deploy my ear file to Weblogic app server 8.1 through the console. On deploying, it gives me the foll. error message:
Exception:weblogic.management.ApplicationException: Prepare failed. Task Id = 0
Error: [HTTP:101179][HTTP] Error occurred while parsing descriptor in Web application, <b>org.xml.sax.SAXParseException:
The element type "web-app" must be terminated by the matching end-tag "</web-app>".</b>
at weblogic.apache.xerces.parsers.DOMParser.parse(Lorg.xml.sax.InputSource)(DOMParser.java:271)
But my web.xml file has the element tag web-app properly ended. I don't see any problem with the web.xml file. Can anyone please tell me what could be the problem here.
Thanks,
SP

Hi,
Will you type all the elements in the some other notepad which were in web.xml file ,delete the old web.xml file and save the file as web.xml and try to deploy the application again ?
Note:If you feel that no errors in web.xml file ,Open the web.xml file in Internet Explorer then it will show the errors if you hava any.
With Regards
Anilkumar kari

Time Machine will not complete a system backup and terminates with "Unable to complete backup. An error occurred while copying files to the backup volume. This follows a problem when Time machne terminated when the volume was almost full.

On 11/1/2011, Time Machine (TM) terminated with an error message I did not record. I noted that the drive was full and decided to do a separate complete bootable system backup using Carbon Copy Clone (CCC), before clearing the TM volume and trying to start it over clean. Part way through the full system backup CCC put up a message that there was a Physical Problem "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". That was about the time that TM malfunctioned, so I assumed they were related. After starting CCC over a couple of times, and getting the same error message, I let it go through to completion of the backup, which took three or four hours. I then ran tests using Disk Utility and verified that there was nothing physically wrong with both the internal hard drive and the TM volume. I also erased and reformatted the TM volume. However, every time I started Time Machine, it would record a few GB and terminate with "Unable to complete backup. An error occurred while copying files to the backup volume". I restarted the computer with no change in results. Note that prior to starting the CCC backup, I "Repaired Permissions", "zapped the PRAM" and "re-set the SMC", hoping to have a clean bootable system on the backup. I ran Techtool and no problems were found.
I'm running this on an Intel iMac under 10.5.8 and recording to a 500GB My Passport drive. My hard drive is only about half full at 246 GB. My assessment is that something happened at 16-28-16 on 11/1/2001 to screwup the Backup Directory in the file at "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". My question is, how do I fix it?
I had just completed writing everything above here, explaining the problems I had been encountering for the past 24 hours. I had the Time Machine window standing open on the desktop where I could see it, having recentlycleared it after the last termination. As I was proofing what I had written, I looked at the window and noted that the clock had started a new run for a full back up, since all prior efforts had failed and the TM volume was empty. As I watched and waited for it to fail again, as it had been doing at about 13 GB, it kept going and going until it just finished a complete backup, about 4.5 hours later, with my having done nothing. Now my question would have to be - what could possiibly have happened to make it perform this way? It will be interesting to see if it continue to operate normally, or if the problem will return, in a later backup run.

jcm21 wrote:
CCC put up a message that there was a Physical Problem "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16"
You should not keep those files for long, and probably shouldn't back them up (if you need them at all -- since you do regular backups, I'm doubtful just how worthwhile that feature is).
"Unable to complete backup. An error occurred while copying files to the backup volume".
One of Apple's maddeningly incomplete messages. Most likely, there's a problem with a file (quite possibly the one CCC didn't like). See #C3 in Time Machine - Troubleshooting for details and instructions on finding and fixing it.
If you continue running the Directory Protection app, be sure to exclude your Time Machine drive from it (as it will just take up lots of room, and won't help repair your backups if there's a problem); and exclude the folders it creates from being backed-up by Time Machine (as they'll create large backups, and you probably can't use the backed-up folders anyway), per #10 in Time Machine - Frequently Asked Questions.

Error occured while deploying SOAOrderBooking

I encountered the following error while deploying SOAOrderBooking BPEL process using Ant. The following messages are copied from "Apache Ant - Log". Please advice....
Buildfile: C:\soademo\SOAOrderBooking\build.xml
pre-deploy:
validateTask:
[echo]
| Validating workflow
[validateTask] url is file:/C:/oracledevday/jdeveloper/integration/bpm/support/files/WorkflowTaskDefinition.xsd
[validateTask] Validation of workflow task definitions is completed without errors
compile:
[echo]
| Compiling bpel process SOAOrderBooking, revision 1.0
[bpelc] unknown wsdl extension.
[bpelc] In WSDL at "http://localhost:8888/esb/wsil/Fulfillment/OrderFulfillment?wsdl", extension element "{http://www.oracle.com/esb/}binding" is not known. Ignore this element.
[bpelc] Please make sure the spelling of the element is correct and the WSDL import is complete.
[bpelc]
[bpelc] validating "C:\soademo\SOAOrderBooking\bpel\SOAOrderBooking.bpel" ...
[bpelc] BPEL suitcase generated in: C:\soademo\SOAOrderBooking\output\bpel_SOAOrderBooking_1.0.jar
[bpelc] Warning: BPEL validation has warnings.
[bpelc] The following warnings were reported during validation:
[bpelc]
[bpelc] [Warning ORABPEL-10041]: Trying to assign incompatible types
[bpelc] [Description]: in line 134 of "C:\soademo\SOAOrderBooking\bpel\SOAOrderBooking.bpel", <from> value type "{http://www.w3.org/2001/XMLSchema}string" is not compatible with <to> value type "{http://xmlns.oracle.com/pcbpel/adapter/db/top/OrderStatus}ordid anonymous type".
[bpelc] [Potential fix]: Please make sure that the return value of from-spec query is compatible with the to-spec query.
[bpelc]
[bpelc] [Warning ORABPEL-10041]: Trying to assign incompatible types
[bpelc] [Description]: in line 145 of "C:\soademo\SOAOrderBooking\bpel\SOAOrderBooking.bpel", <from> value type "{http://www.w3.org/2001/XMLSchema}string" is not compatible with <to> value type "{http://xmlns.oracle.com/pcbpel/adapter/db/top/OrderStatus}comments anonymous type".
[bpelc] [Potential fix]: Please make sure that the return value of from-spec query is compatible with the to-spec query.
[bpelc]
[bpelc] [Warning ORABPEL-10041]: Trying to assign incompatible types
[bpelc] [Description]: in line 191 of "C:\soademo\SOAOrderBooking\bpel\SOAOrderBooking.bpel", <from> value type "{http://www.w3.org/2001/XMLSchema}decimal" is not compatible with <to> value type "{http://www.w3.org/2001/XMLSchema}string".
[bpelc] [Potential fix]: Please make sure that the return value of from-spec query is compatible with the to-spec query.
[bpelc]
[bpelc] [Warning ORABPEL-10041]: Trying to assign incompatible types
[bpelc] [Description]: in line 629 of "C:\soademo\SOAOrderBooking\bpel\SOAOrderBooking.bpel", <from> value type "{http://www.w3.org/2001/XMLSchema}string" is not compatible with <to> value type "{http://www.w3.org/2001/XMLSchema}decimal".
[bpelc] [Potential fix]: Please make sure that the return value of from-spec query is compatible with the to-spec query.
[bpelc]
[bpelc] [Warning ORABPEL-10041]: Trying to assign incompatible types
[bpelc] [Description]: in line 645 of "C:\soademo\SOAOrderBooking\bpel\SOAOrderBooking.bpel", <from> value type "{http://www.w3.org/2001/XMLSchema}string" is not compatible with <to> value type "{http://www.w3.org/2001/XMLSchema}decimal".
[bpelc] [Potential fix]: Please make sure that the return value of from-spec query is compatible with the to-spec query.
[bpelc]
[bpelc] [Warning ORABPEL-10041]: Trying to assign incompatible types
[bpelc] [Description]: in line 692 of "C:\soademo\SOAOrderBooking\bpel\SOAOrderBooking.bpel", <from> value type "{http://www.w3.org/2001/XMLSchema}string" is not compatible with <to> value type "{http://xmlns.oracle.com/pcbpel/adapter/db/top/OrderStatus}ordid anonymous type".
[bpelc] [Potential fix]: Please make sure that the return value of from-spec query is compatible with the to-spec query.
[bpelc]
[bpelc]
[bpelc]
deployProcess:
[echo]
| Deploying bpel process SOAOrderBooking on localhost, port 8888
[deployProcess] Deploying process C:\soademo\SOAOrderBooking\output\bpel_SOAOrderBooking_1.0.jar
[deployProcess] Successfully deployed the process "SOAOrderBooking" on server "localhost" and port "8888"
deployTaskForm:
[echo]
| Deploying workflow form for SOAOrderBooking on localhost, port 8888
[deployTaskForm] Start of deploying forms
[deployTaskForm] checking for form directory as form/warC:\soademo\SOAOrderBooking\public_html\ApproveOrder\form\war
[deployTaskForm] Form directory name = C:\soademo\SOAOrderBooking\public_html\ApproveOrder\form
[deployTaskForm] Start of deploying form C:\soademo\SOAOrderBooking\public_html\ApproveOrder\form
[deployTaskForm] Start of copying file C:\soademo\SOAOrderBooking\public_html\ApproveOrder\form\ear\META-INF\application.xml to C:\soademo\SOAOrderBooking\public_html\ApproveOrder\form\ear\META-INF\application.xml.bak
[deployTaskForm] End of copying file C:\soademo\SOAOrderBooking\public_html\ApproveOrder\form\ear\META-INF\application.xml to C:\soademo\SOAOrderBooking\public_html\ApproveOrder\form\ear\META-INF\application.xml.bak
[deployTaskForm] Context name before converting /default/SOAOrderBooking/1.0/ApproveOrder
[deployTaskForm] Context name after converting /default/SOAOrderBooking/1.0/ApproveOrder
[deployTaskForm] Creating applicatio xml with context /default/SOAOrderBooking/1.0/ApproveOrder
[deployTaskForm] WEB File : C:\soademo\SOAOrderBooking\public_html\ApproveOrder\form\war\WEB-INF
[deployTaskForm] Generating the web archive workflowform.war in directory C:\soademo\SOAOrderBooking\public_html\ApproveOrder\form\ear
[deployTaskForm] Generating the application archive default_SOAOrderBooking_1_0_ApproveOrder.ear in directory C:\soademo\SOAOrderBooking\public_html\ApproveOrder\form
[deployTaskForm] Deploying apps to platform ias_10g
[deployTaskForm] Start of deploying default_SOAOrderBooking_1_0_ApproveOrder.ear to oc4j
[deployTaskForm] java oracle.oc4j.admin.deploy.cmdline.Oc4jAdminCmdline deployer:oc4j:opmn://localhost:6003/home oc4jadmin welcome1 -deploy -file C:\soademo\SOAOrderBooking\public_html\ApproveOrder\form\default_SOAOrderBooking_1_0_ApproveOrder.ear -deploymentName default_SOAOrderBooking_1_0_ApproveOrder -parent orabpel
[deployTaskForm] Start of deploy apps
[deployTaskForm] 06/09/10 23:14:25 Notification ==>Application Deployer for default_SOAOrderBooking_1_0_ApproveOrder STARTS.
[deployTaskForm]
[deployTaskForm] 06/09/10 23:14:25 Notification ==>Undeploy previous deployment
[deployTaskForm]
[deployTaskForm] 06/09/10 23:14:26 Notification ==>Initialize C:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\default_SOAOrderBooking_1_0_ApproveOrder.ear begins...
[deployTaskForm]
[deployTaskForm] 06/09/10 23:14:26 Notification ==>Initialize C:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\default_SOAOrderBooking_1_0_ApproveOrder.ear ends...
[deployTaskForm]
[deployTaskForm] 06/09/10 23:14:26 Notification ==>Starting application : default_SOAOrderBooking_1_0_ApproveOrder
[deployTaskForm]
[deployTaskForm] 06/09/10 23:14:26 Notification ==>Initializing ClassLoader(s)
[deployTaskForm]
[deployTaskForm] 06/09/10 23:14:26 Notification ==>Initializing EJB container
[deployTaskForm]
[deployTaskForm] 06/09/10 23:14:26 Notification ==>Loading connector(s)
[deployTaskForm]
[deployTaskForm] 06/09/10 23:14:26 Notification ==>Starting up resource adapters
[deployTaskForm]
[deployTaskForm] 06/09/10 23:14:26 Notification ==>Initializing EJB sessions
[deployTaskForm]
[deployTaskForm] 06/09/10 23:14:26 Notification ==>Committing ClassLoader(s)
[deployTaskForm]
[deployTaskForm] 06/09/10 23:14:26 Notification ==>Initialize workflowform begins...
[deployTaskForm]
[deployTaskForm] 06/09/10 23:14:26 Notification ==>Initialize workflowform ends...
[deployTaskForm]
[deployTaskForm] 06/09/10 23:14:26 Notification ==>Started application : default_SOAOrderBooking_1_0_ApproveOrder
[deployTaskForm]
[deployTaskForm] 06/09/10 23:14:26 Notification ==>Application Deployer for default_SOAOrderBooking_1_0_ApproveOrder COMPLETES. Operation time: 1625 msecs
[deployTaskForm]
[deployTaskForm] End of deploy apps
[deployTaskForm] java oracle.oc4j.admin.deploy.cmdline.Oc4jAdminCmdline deployer:oc4j:opmn://localhost:6003/home oc4jadmin welcome1 -bindWebApp -appName default_SOAOrderBooking_1_0_ApproveOrder -webModuleName workflowform -webSiteName default-web-site -contextRoot /default/SOAOrderBooking/1.0/ApproveOrder
[deployTaskForm] Start bind web app
[deployTaskForm] End of bind web app
[deployTaskForm] End of deploying default_SOAOrderBooking_1_0_ApproveOrder.earto oc4j
[deployTaskForm] Deleting file = workflowform.war
[deployTaskForm] Deleting file = default_SOAOrderBooking_1_0_ApproveOrder.ear
[deployTaskForm] End of deploying form C:\soademo\SOAOrderBooking\public_html\ApproveOrder\form
[deployTaskForm] End of deploying forms
[deployTaskForm] Successfully deployed form on server "localhost"
[deployTaskForm] Start of copying file C:\soademo\SOAOrderBooking\public_html\ApproveOrder\form\ear\META-INF\application.xml.bak to C:\soademo\SOAOrderBooking\public_html\ApproveOrder\form\ear\META-INF\application.xml
[deployTaskForm] End of copying file C:\soademo\SOAOrderBooking\public_html\ApproveOrder\form\ear\META-INF\application.xml.bak to C:\soademo\SOAOrderBooking\public_html\ApproveOrder\form\ear\META-INF\application.xml
deployDecisionServices:
[echo]
| Deploying decision services for SOAOrderBooking on localhost, port 8888
BUILD FAILED
C:\soademo\SOAOrderBooking\build.xml:126: Error while deploying decision services on server "localhost"
Total time: 2 minutes 7 seconds

Your path includes "oracledevday" so I wonder if you were one of the original ODD attendees. If so, you have a pre-developer preview version of the SOA Demo and SOA Suite - these are matched to each other.
If you get a new version of either one from OTN Dev Preview, you'll have this deployment problem.
Be sure to get both the SOA Order Booking Demo AND the SOA Suite software from the OTN developer preview download.
Heidi.

Error occured while deploying EBS Accessgate in Weblogic.

Hi,
i am doing OAM 101gR2 integration with EBS 12.1.6 ( i am using Acess Gate PatchNO ). while i am deploying EBS Accessgate with EBS i am getting following error. it is unable to create
[echo] ********************************************************************
[echo] STEP 1: CREATING DATA SOURCE
[echo] ********************************************************************
BUILD FAILED
/apps/oracle/Middleware/appsutil/accessgate/myebs/txkEBSAuth.xml:48: The following error occurred while executing this line:
/apps/oracle/Middleware/appsutil/accessgate/myebs/txkEBSAuth.xml:409: Error Creating DataSource

Hi,
First you deploy accessgate application using ant script,At that time application deployment will fail But take the back up of Plan.xml, remove the application from weblogic domain. and deploy the application manually. and replace previous plan.xml and redeploy it will work.

Error occurred while setting up Apps Context.

I am trying to call a stored procedure using Oracle Apps Adapter . MY JCA settings are as following.
<endpoint-interaction portType="AppsService_ptt" operation="AppsService">
<interaction-spec className="oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec">
<property name="IRepInternalName" value="PLSQL:AP_VENDOR_SITES_PKG:INSERT_ROW"/>
<property name="SchemaName" value="APPS"/>
<property name="PackageName" value="AP_VENDOR_SITES_PKG"/>
<property name="ProcedureName" value="INSERT_ROW"/>
<property name="Username" value="sysadmin"/>
<property name="Responsibility" value="System Administrator"/>
</interaction-spec>
<output/>
</endpoint-interaction>
But when I invoke this in logs it gives following error...
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'AppsService' failed due to: Apps Context Error.
Error occurred while setting up Apps Context.
Context parameters should be valid.
Contact oracle support if error is not fixable.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution."

Hello ,
I am facing the same problem. How did you solve the same?? Please help.
Thanking you

Problems downloading and installing OS X Yosemite An error occurred while running scripts from the package

Hi! I have problems downloading and installing OS X Yosemite.
While downloading this message pops up:
An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.
and in /var/log/install.log i can see:
MacBook-Pro installd[1086]: PackageKit: Install Failed: PKG: pre-install scripts for "com.apple.pkg.InstallMacOSX"\nError Domain=PKInstallErrorDomain Code=112 UserInfo=0x100193c00 "An error occurred while running scripts from the package “wct8079783343594854923.pkg”." {\n NSFilePath = preinstall;\n NSLocalizedDescription = "An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.";\n NSURL = "#InstallMacOSX.pkg -- file://localhost/Users/username/Library/Application%20Support/AppStore/91504108 2/wct8079783343594854923.pkg#Distribution";\n PKInstallPackageIdentifier = "com.apple.pkg.InstallMacOSX";\n}
does anyone have an idea about this?
thank you very much

Mucked up installation. If the installer app is still in /Applications, delete it and start over.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.2), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Hi,i am using iphone 4s,my problem is when i want to play video other than youtube file from facebook this message come out "An error occured while processing your request. Reference

Hi,i am using iphone 4s,my problem is when i want to play video other than youtube file from facebook this message come out "An error occured while processing your request. Reference

Is your friends phone jailbroke? Also are you using the facebook app? If so then you need to ask the developer of the app what the problem is.

I'm having problems with a message that says: An error occurred while Attempting to create the directory: C:/program files/itunes/cd configuarion

I know this is a long story, but I'll be damned if I'm not going to get the most specific help I can (as Apple seems to specialize in assuming user error for all its demonic software). I've never had issues with iTunes before (barring a "Connect to iTunes" snafu with my iPod Touch) -- and never, in fact, with Windows Vista, if you believe that -- but this is the most bizarre thing I've seen.
I recently downloaded the new iTunes v 9.0.3 as I am occasionally prompted to do whenever a new version comes out, and immediately I had problems. Access to the iTunes and Quicktime folders was mysteriously denied after the update, and after several hours of frustration, I was able to grant my own Administrative access to these two folders and installation went through. Thank God.
Then I bought some music. No problems -- downloaded just fine, along with a copy of Cinderella Man and the new episode of Smallville. Life was good for a few days.
Then I connected my iPod Touch to the computer. All of a sudden, Microsoft Windows informs me that the "Apple Mobile Device Service stopped working and was closed," with subtext, "A problem caused the application to stop working correctly. Windows will notify you if a solution is available."
Bullsh*t Windows can help me with anything from Apple.
So I've tried to get iTunes to work with me on this. I've come up against the infamous "iTunes could not connect to this iPhone because an unknown error occurred (OxE8000001)" message. My God, when does it ever end?
So I go into Control Panel > Administrative Tools > Services > Apple Mobile Device and start it back up... only to watch it stop again inexplicably moments later. Hmm... Restart. Stays on. Unplug the iPod and plug it back in. Apple Mobile Device Service stops again. Maybe it's the iPod Service itself. Hey, that one's not started! [Start] "Windows could not start the iPod Service service on Local Computer -- Error 5: Access is denied."
What the f*ck is it with this "Access denied" crap? I've never been denied access to even the most intimate functions, files and folders on my freaking computer before! What has Apple created!?
I thought, perhaps Apple Mobile Device software was somehow removed. Okay, let's redownload iTunes (aka Repair the program from the Programs and Features menu in the Control Panel -- same thing). Huh. "An error occurred while attempting to create directory C:\Program Files\iTunes\CD Configuration," and I can choose to Retry or Cancel. So, instinctively, I deleted the CD Configuration folder, assuming iTunes Setup would just recreate it.
Well, that didn't work now, did it? I deleted it and hit Retry, and it said, "The installer has insufficient priveleges to access the directory: C:\Program Files\iTunes\CD Configuration. Log on as administrator or contact your system administrator." Running the .exe file as an adminstrator changes NOTHING about this predicament.
So that's where it stands. No CD Configuration folder; full access to all files and folders involved; Apple Mobile Device Service still keeps going off for no reason; iPod Service still doesn't run; Repairing/Reinstalling iTunes, Quicktime, Bonjour, etc. does nothing; and God (aka Steve Jobs, apparently) hates me.
. . . . . . . . . . . . Help me.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W.

Problem while deploying app : An error occurred while contacting the subscription settings service

Similar Messages

Maybe you are looking for