Problem while determining receivers in enhanced receiver determination

i am doing scenario FILE-TO-FILE (with one sender and 2 receivers, dynamic receiver identification based on mapping)using enhanced receiver determination,
it is giving following error in MONI,
Problem while determining receivers using interface mapping
System expected the element 'Receivers'
pls. help me if anybody experienced this scenario,
i am doing this scenario based on the below blog.
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16

Have u properly followed the weblog,
Integration Repository Step No 2 and Step No 5
2. In order to use the enhanced receiver determination, create a message mapping which has the target message as Receiver Determination in the SAP BASIS --> http://sap.com/xi/XI/System.
5. Create the Interface Mapping 
U must have checked that ur Xi is on SP 16 or above )
Regards,
Prateek

Similar Messages

Enhanced Receiver determination - for Integration Process

Hi,
Just wanted to confirm that if it is possible to have more than one Receivers, with Enhanced Receiver Determination and one of the Receiver happens to be Integration Process. I know with Enhanced Receiver Determinations you can find more than one Receivers at Run time, however the key question is, if in addition to normal Receiver Systems (like SAP R/3 or Web Services etc), if we can also kickoff Integration Process within Enhanced Receiver Determination.
Thanking in advance.

as said by Udo Martens
Assumedly the different receivers are using different Inbound Interfaces (a BP is using an Abstract Interface). Therefore you would need for each different receiver a own Interface Determination referring a own mapping.
refer this wiki http://wiki.sdn.sap.com/wiki/pages/pointstab/viewpageversion.action?pageId=131760630&version=5 to Know how to configure Enhanced receiver determination and Interface determination for each receiver .
In your case one of the receiver will be Integration process

Problem with Enhanced Receiver Determination

Hi Friends,
I am doing the enhanced receiver determination scenario, But it is giving the
error in SXMB_MONI like this
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem while determining receivers using interface mapping: Fehler beim Parsen der Empfänger-Liste.Länge des XML-Dokuments 264</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when determining the receiver: Problem while determining receivers using interface mapping: Fehler beim Parsen der Empfänger-Liste.Länge des XML-Dokuments 264 Problem while determining receivers using interface mapping: Fehler beim Parsen der Empfänger-Liste.Länge des XML-Dokuments 264 Fehler beim Parsen der Empfänger-Liste.Länge des XML-Dokuments 264 System expected the element 'Receivers'</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
this is error is coming in the SXMB_MONI
THE DATA type(Receivers) we create in basis component is comes automatically?
are we have to create?
in my scenario i creted manually,
is it compulsory to specify the properties for the party and agency?
is it compulsory to create 2 Receiver structures in msg structure?
if yes what r those, actually i used from sap.help.com,
Can any body should give me the solution for this, regarding mapping and configuration , if anybody experienced this scenario. Pls . give me the guidelines to do.

Hi,
the mapping creating the receiver list is not producing the required element "Receivers" from Namespace "'http://sap.com/xi/XI/System". Look to the operation mapping given in the enhance Receiver Determination (IB Directory) and detect the corresponding mapping program (ESR). Copy the source payload from MONI, test the mapping program and correct it.
Regards,
Udo

Problem in enhanced receiver determination

hi all
I was doing enhanced receiver determination in that i got following problem
at first i copied abstract interface ReceiverDetermination from SAP BASIS to my component then i created my mapping program containing one udf related to my scenario.I also created one interface mapping but when i went in the directory then
my this mapping is not coming when i have to choose it after clicking to extended receiver determination in receiver determination.
my objects are already activated in design.the udf is also working properly.
Please reply. This is an urgent issue.

Hi-
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/content.htm

Enhanced Receiver Determination - Hard-coded Receivers??

Hi mates,
I need to implment enhanced receiver determination. I see from the documentation and blogs that I need to hard-code the receiver service i.e. specifying the value in message mapping.
What happens if I transport this mapping program to QA or PROD system? Do I need to take care of the Receiver system names in QA & PROD in the mapping.
Isnt it hard-coding?
Is there any better way of doing this, apart from using the BPM.
I appreciate your inputs.
thx in adv
praveen

Hi,
If you are using enhanced receiver determination, you are going to provide Receiver Details in the Integration Directory right ? If so, anyway while doing Transport from the Dev to QA, you are creating a Transport Target for the business systems.. So here in the configuration it will take care ...
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
But, I am not sure where are you refering about Hard-Coding ?
Rgds,
moorthy

Error while creating Enhanced Receiver Determination

Hi,
My Scenario is File to File and in my scenario i am using Extended Receiver Determination as per requirement.
In Receiver Determination(Extended) even though i am entering Operation Mapping ..an error occured
Checking advanced receiver determination...
Enter a mapping
I thought it is because of Cache refresh ..and i have done it ..But no use..Gettig the same error...
Can anyone please tell me where i went wrong??and How to fix this issue??

I thought it is because of Cache refresh ..and i have done it ..But no use..Gettig the same error...
did you perform a full cache refresh also? If you have Operation Mapping defined with receiverDetermination as target and if it is activated then there should not be any problem in selecting the same in Receiver Determination?

Intermittent JDBC error in Enhanced Receiver Determination

Hi,
I have an interface that use Enhanced Receiver Determination in PI 7.1 EHP1.
The database is DB2 on i5/os 6.1
Sometimes message ends in error :Error when determining the receiver: Problem while determining receivers using interface mapping: Runtime exception occurred during application mapping com/sap/xi/tf/_HI01_to_ReceiverDetermination_;
But the same message with same values is successfull earlier.
This is not a design problem; the interface is working well 95% of the time.
I found some JDBC error in NWA java logs:
Error in sax handler parsing request: Error when executing statement for table/stored proc. 'table' (structure 'statement'): java.sql.SQLException: [SQL0104] Token "BUSINESS_SYSTEM" was not valid. Valid tokens: FOR SKIP WITH FETCH ORDER UNION EXCEPT OPTIMIZE.
Error when calling an adapter by using the communication channel CC_RECEIVER_JDBC_PIDB2 (Party: *, Service: INTEGRATION_SERVER_PX1, Object ID: cb7ea38fb2ac3a06b12d79f5ade2bcf7) XI AF API call failed. Module exception: (No information available). Cause Exception: 'Error processing request in sax parser: Error when executing statement for table/stored proc. 'table' (structure 'statement'): java.sql.SQLException: [SQL0104] Token "BUSINESS_SYSTEM" was not valid. Valid tokens: FOR SKIP WITH FETCH ORDER UNION EXCEPT OPTIMIZE.'.
Thrown:
com.sap.aii.af.service.api.AFException: XI AF API call failed. Module exception: (No information available). Cause Exception: 'Error processing request in sax parser: Error when executing statement for table/stored proc. 'table' (structure 'statement'): java.sql.SQLException: [SQL0104] Token "BUSINESS_SYSTEM" was not valid. Valid tokens: FOR SKIP WITH FETCH ORDER UNION EXCEPT OPTIMIZE.'.
at com.sap.aii.af.service.api.AdapterAccess.sendMsg(AdapterAccess.java:214)
at com.sap.aii.af.service.api.AdapterAccess.execute(AdapterAccess.java:283)
at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.execute(AdapterProxyLocal.java:119)
at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.execute(SystemAccessorInternal.java:76)
at com.sap.aii.mapping.lookup.DataBaseAccessor.execute(DataBaseAccessor.java:74)
at com.sap.aii.mappingtool.flib7.SelectSingle.selectSingle(SelectSingle.java:54)
at sun.reflect.GeneratedMethodAccessor607.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
Any idea? Can high volume cause the JDBC Receiver to fail?
Martin

hi,
you r trying to impliment Lookup for the file adapter which is not synch in nature and hance u r not getting the responce back.
please find the link which deals with how to impliment lookup for file adapter.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file%252blookup%252bin%252budf.
now once u get rhe runtime receiver u can perform enhanced receiver determination (write a simple UDF)
regards,
navneet.

Enhanced Receiver Determination in PI7.1

Hi,
We have a requirement where in we have to use the Enhanced Receiver Determination for one of our scenarios for choosing the receiver.We are on PI7.1.
As of now,we have mapped a constant rcvr(Test_Supplier) to the Service in the message mapping from our source to the target -Receivers, as we do for Enhanced Receiver determination.The rcvr determination choosing Extended and the correct Operation mapping has been configured.The coresponding Interface determination and Receiver agreements have also been configured.
When trying to test this by posting a payload through RWB,we get the No_Receiver_Case_Async error.
Is it necessary to map the party field also in the message mapping?Am I missing something here?Kindly advise.
Thanks and Regards,
Induja

When trying to test this by posting a payload through RWB,we get the No_Receiver_Case_Async error.
Is the Mapping which you developed to determine the receiver(s) able to give the appropriate output? Apart from cache problem, this can also be the issue when the mapping does not produce i.e. no proper service is populated in the corresponding node....the service must be actually present (and active) in ID
Regards,
Abhishek

Enhanced Receiver Determination with RFC Lookup

Hi All,
I am building an interface with Enhanced Receiver Determination. Scenario would be that the Receiver Systems would be stored in a Z table in SAP ECC, and in PI Receiver Determination I am doing an RFC look up to find the systems, and using those.
I built the mapping for Receiver Determination, and it tested fine in ESR. But while Creating the Receiver Determination in Integration Directory, After I specify the Receiver mapping name, and put the RFC channel name for the RFC parameter, it doesnt allow me to save the Receiver Agreement with a run time error message
"Link from Receiver Determination | <Sender>| <Interface>| * | * to object type "Channel" with role "122474913b1311deaadb42057dd8b002" is not permitted"
My question is a) if the RFC lookup allowed in the mapping for Receiver Determination?
B) if yes, am I missing someting or is it a system issue?

i have seen Enhanced RD with lookups that work. Have to say it was not a RFC lookup used but rather a DB look in one of the implementations i had worked with. But still I really dont think a RFC lookup should be an issue.
Troubleshoot the lookup mapping to be working other than in the enhanced RD (i.e independently) .
if you head no where, i suggest opening a OSS note.

Interface Determination under Enhanced Receiver Determination Scenario

Hi,
One of the very basic assumption for Enhanced Receiver Determination is that Receivers are found at run time, and one of the such requirement is that we don't know about Receiver Business System at the time of configuration.
Now for such scenarios, how do we configure "Interface Determination". For Interface Determination one of the input filed is "Receiver Service/Party", in addition to "Sender Service/Party" plus "Sender Interface"
Since we don't know Receivers at config, what value(s) should come in "Receiver Service/Party" in Interface Determination at config time.
Thanking all of you in advance

Hi Rajan,
You have to do the following things:-
First, maintain Database Table in SAP XI. Which contains several keys like Sender, Receiver system and then according to that key combination we perform a JCO call and fetch the values which gives us the correct receiver and interface.
Create a Data Type which will be having Two elements Service And Interface.
Now careate a message type and message interface for this data type. This will be for your receiver.
Then use source payload and perform a message mapping between Sender Payload & this Message Type.
Use UDF and make a JCO call and fetch table entries for service and interface.
Then in Directory perform extended determination and use this mapping into it. The result will be Service & Interface.
Thanqs
Biplab

Enhanced Receiver Determination in Synchronous Scenario

Hi,
my synch scenario with standard Receiver determination is working fine.
the service interfaces i used are SI_OutSynch_EmpInfo_Request and SI_InbSynch_EmpInfo_Provide.
I am now trying to apply enhanced Receiver determination for the same synch scenario.
For this, in ID, in my Receiver Determination object i selected the radio button Extended, then it is asking for an operation mapping. infact it is asking for an OM with sender Interface=SI_OutSynch_EmpInfo_Request (from my swcv) and Receiver Interface = ReceiverDetermination (from SAP BASIS swcv)..
So I logged into ESR, and created an OM_test_EnhancedRD, with sourceInterface=SI_OutSynch_EmpInfo_Request (from my swcv) and TargetInterface = ReceiverDetermination (from SAP BASIS swcv)
But when i tried to activate the OM_test_EnhancedRD, it is not getting activated, and giving below error:
Interface modi are different. Source interface Operation SI_OutSynch_EmpInfo_Request | http://mycomp.com/myns is synchronous. Target interface Operation ReceiverDetermination | http://sap.com/xi/XI/System is asynchronous
So my queries are:
1. is for synch scenarios, if receiver information is part of the request payload, how can we apply the extended Receiver Determination, so that the Receiver is determined dynamically.
2. or is there any synch version of ReceiverDetermination (from SAP BASIS swcv) available.
thanks in advance.
madhu.

in this case, does SAP provide synch version of ReceiverDetermination SI, so that we can use that in OM for enhanced Receiver Determination.
If you have a look at the blog-reference given by Ravi you will find a way on how to make the ReceiverDetermination Si synchronous or work with the same async SI.....for quick reference below is the way mentioned in the blog:
From the blog:
Option 1:
A quick and easy way to allow for synchronous enhanced receiver determination setup is to circumvent the check that prevents
a synchronous interface to be matched to an asynchronous interface in an interface mapping. This can be done simply by
manually entering the name and namespace of the ReceiverDetermination interface object (e.g. 'ReceiverDetermination'
and 'http://sap.com/xi/XI/System' respectively) for the target/receiver interface in the interface mapping, but leaving the value for
the Software Component Version empty.
Option 2:
Select Modify and then change the mode to synchronous. Since a synchronous interface requires an input message as well, you
can reuse the Receivers message type used in the output message - it doesn't really matter as long as some message type is
used.
Both of the above options are available under the Applying the Workarounds section of the blog
Regards,
Abhishek.

Enhanced Receiver determination - Fatal Error.

Hi All,
We are using Enhanced Receiver Determination.
We are getting Fatal error in SXMB_MONI though our Intarface mapping is working correctly but when tried testing from runtime work bench we are getting error.
The error message shows
SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem when determining the receiver when using the Interface Mapping: During the application mapping com/sap/xi/tf/_Find_Receiver_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
Please suggest any setting needs to be done.
Thanks
Regards,
Ashwin

Hi Ashwin,
Just check if the condtion is correct. Also, look for some typo error as the name is case sensitive.
Also, trigger a delta cache refresh for this receiver determination object after modifying the object.
This should solve your problem.
Regards, Gaurav.

Error in enhanced receiver determination

Hi Experts,
I am trying to implement a scenario in which i have to get the receivers at run time by doing a lookup to a file which stores the destinations.
i am getting the error that no receivers could be determined.
thanks,
Anika

hi,
you r trying to impliment Lookup for the file adapter which is not synch in nature and hance u r not getting the responce back.
please find the link which deals with how to impliment lookup for file adapter.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file%252blookup%252bin%252budf.
now once u get rhe runtime receiver u can perform enhanced receiver determination (write a simple UDF)
regards,
navneet.

Using Enhanced Receiver Determination with a Synchronous Service Interface

Hi Experts,
I want to use ERD on a Synchronous Interface. Is that possible? Perhaps it has no sense, because in an ERD you can choice multiple receivers and that its against the synchronous philosophy: what if you declare 2 or more receivers, from wich one has the right response to be taken?
In technical terms I build the operation mapping as it is written both in the blog (/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16) and the SAP HELP.
But in my OM I have as source service interface one Abstract Synchronous and in the target I have one Abstract Asynchronous wich is not possible. So I tried many tricks like creating my own synchronous ReceiverDetermination Service Interface in my SWC, but it is not detected. Other trick will be modifying the standart SI, but it will affect the next guy trying to use ERD with an Asynchronous interface
The point its that it is a little funny that the receiver determination allows using ERD with a synchronous SI wich makes me think that it will be possible...
Is it possible to use ERD with a Synchronous Interface?
Regards
Gonzalo

i have seen Enhanced RD with lookups that work. Have to say it was not a RFC lookup used but rather a DB look in one of the implementations i had worked with. But still I really dont think a RFC lookup should be an issue.
Troubleshoot the lookup mapping to be working other than in the enhanced RD (i.e independently) .
if you head no where, i suggest opening a OSS note.

Enhanced receiver determination - Idoc 2 Idoc scenario

Hi,
I am trying Enhanced receiver determination - in an Idoc 2 Idoc scenario.
But when I selected Enhanced receiver determination in ID, it is asking for interface mapping.As it is an Idoc 2 Idoc scenario, I did not create any mapping objects in IR.
Is there any round about for this.
reg,

Hi,
if you are planning to send the Idoc to two systems then you do not need Enhanced Recieevr Determination.
You can add multiple Receivers In the receiver Determination under Configured Receivers and now the same idoc will be sent to 2 receivers.
Like mentioned by moorhty, Enahnced Receievr Determination allows you to dynamically determine receivers using a mapping program.! I dont think that is needed in your case
Regards
Bhavesh

Problem while determining receivers in enhanced receiver determination

Similar Messages

Maybe you are looking for