Problem while doing the Cheque print through f-58

Dear Team,
I am encountering an issue while doing the Transaction through F-58 System is generating the cheeque print with coma instead of decimals i.e instead of 1,00,000.00 its comming as 1.000.000,00.
Please advice how to correct this.
Thanks for the consideration.
Regards,
Suma Nalluri.

Dear Nambi,
I have checked the settings there evry thing is fine.Still i am facing the same issue. I do not understand may be due to any bug .Please advice.
Regards,
Suma.

Similar Messages

  • Problems while starting the Managed Server through Node Manager..

    When I was trying to start a Managed Server using the Nodemanager , I am getting the following error :
    NodeManager not configured to receive commands from host : emis-develop
    I have the "nodemanager.hosts" file under the directory "c:\bea\wlserver6.1\config" and even while invoking the script for the startnodemanager , I am indicating this in the script ! Any ideas for this problem ??

    The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.> You may configure custom Identity and Trust in weblogic. It is not recommended to use Demo Trsut and Demo Identity for environments higher to Dev. -
    http://download.oracle.com/docs/cd/E14571_01/web.1111/e13707/identity_trust.htm#i1202182
    Regards,
    Anuj

  • Problem while doing the demo ADF for Forms/4GL Developers

    Hi
    I am running the demo for ADF for Forms/4GL Developers. At Chapter 10(Enabling Security), in page 10-5, they have asked to copy META-INF folder and it should contain jazn-data.xml and orion-application.xml. But in my META-INF folder , i can only find one bundle.xml.
    Can you please help me on how to proceed on that?
    Regards
    Sabarish

    Hi
    I am running the demo for ADF for Forms/4GL Developers. At Chapter 10(Enabling Security), in page 10-5, they have asked to copy META-INF folder and it should contain jazn-data.xml and orion-application.xml. But in my META-INF folder , i can only find one bundle.xml.
    Can you please help me on how to proceed on that?
    Regards
    Sabarish

  • I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

    I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

    The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works.  Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up.  Try them again. 
    Google your particular isp, and ipad and many times you will find the exact settings needed for your isp.  Or tell us here, and soneone else may be on the same isp.  Some mail services need you to change a port, or have a unique name for the outgoing server.  
    Kep trying.

  • IM Login problem Error while doing the search

    Hi people,
    I'm facing some strange behaviour with login for a couple of users, I have users that don't have problems to login and I have user that can't login, I'm sure that all of them are valid because they're login to Portal Server, and then launch the IMClient using SSO, users that can achieved the login can't found users that can't login using the "add contact" button of the IMClient.
    In the javaws console I'm seeing this exceptions when a user can't login:
    30 Oct 2007 14:02:18,898] [xmpp] [javawsApplicationMain] org.netbeans.lib.collab.CollaborationException: Error while doing the search
    org.netbeans.lib.collab.CollaborationException: Error while doing the search
         at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:330)
         at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:262)
         at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.getUserAttributes(XMPPPersonalStoreService.java:1211)
         at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.getPrivateQuery(XMPPPersonalStoreService.java:1289)
         at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.getProfile(XMPPPersonalStoreService.java:419)
         at com.sun.im.service.xmpp.XMPPPersonalStoreService.getProfile(XMPPPersonalStoreService.java:240)
         at com.iplanet.im.client.manager.CurrentUserManager.getCurrentProfile(CurrentUserManager.java:350)
         at com.iplanet.im.client.manager.Manager.login(Manager.java:1255)
         at com.iplanet.im.client.swing.login.DefaultLoginDialog.login(DefaultLoginDialog.java:550)
         at com.iplanet.im.client.swing.login.DefaultLoginDialog.connect(DefaultLoginDialog.java:540)
         at com.iplanet.im.client.iIM.startLogon(iIM.java:464)
         at com.iplanet.im.client.iIM.init(iIM.java:203)
         at com.iplanet.im.client.iIM.main(iIM.java:950)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.sun.javaws.Launcher.executeApplication(Launcher.java:1171)
         at com.sun.javaws.Launcher.executeMainClass(Launcher.java:1118)
         at com.sun.javaws.Launcher.continueLaunch(Launcher.java:961)
         at com.sun.javaws.Launcher.handleApplicationDesc(Launcher.java:515)
         at com.sun.javaws.Launcher.handleLaunchFile(Launcher.java:218)
         at com.sun.javaws.Launcher.run(Launcher.java:165)
         at java.lang.Thread.run(Thread.java:595)
    /home/lalo/.sunmsgr/mx_m53852_latam_int_bbvabancomer_com_mx/messages/scripts/scripts.txt
    [SafeResourceBundle] Missing resource key: iIMFrame_title
    [Fatal Error] :1:2908: The element type "body" must be terminated by the matching end-tag "</body>".
    com.sun.im.service.CollaborationException: org.netbeans.lib.collab.CollaborationException: Error while doing the search
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
         at com.sun.im.service.util.ReflectUtil.getDelegatorObject(ReflectUtil.java:27)
         at com.sun.im.service.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:179)
         at com.iplanet.im.client.manager.UserCache.getPrincipal(UserCache.java:161)
         at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:977)
         at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:938)
         at com.iplanet.im.client.manager.BuddyListManager.loadBuddyListNow(BuddyListManager.java:430)
         at com.iplanet.im.client.manager.BuddyListManager.init(BuddyListManager.java:200)
         at com.iplanet.im.client.swing.communicator.Communicator.<init>(Communicator.java:316)
         at com.iplanet.im.client.swing.BuddyList.showBuddyList(BuddyList.java:187)
         at com.iplanet.im.client.iIM.showBuddyList(iIM.java:1105)
         at com.iplanet.im.client.swing.Client.openNetlertViews(Client.java:379)
         at com.iplanet.im.client.swing.Client.showViews(Client.java:150)
         at com.iplanet.im.client.iIM.loadNetLert(iIM.java:613)
         at com.iplanet.im.client.swing.login.DefaultLoginDialog$1.run(DefaultLoginDialog.java:610)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
    Caused by: org.netbeans.lib.collab.CollaborationException: Error while doing the search
         at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:330)
         at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:262)
         at com.sun.im.service.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:171)
         ... 19 more
    [Fatal Error] :1:2908: The element type "body" must be terminated by the matching end-tag "</body>".
    com.sun.im.service.CollaborationException: org.netbeans.lib.collab.CollaborationException: Error while doing the search
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
         at com.sun.im.service.util.ReflectUtil.getDelegatorObject(ReflectUtil.java:27)
         at com.sun.im.service.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:179)
         at com.iplanet.im.client.manager.UserCache.getPrincipal(UserCache.java:161)
         at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:977)
         at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:938)
         at com.iplanet.im.client.manager.BuddyListManager.loadBuddyListNow(BuddyListManager.java:430)
         at com.iplanet.im.client.manager.BuddyListManager.init(BuddyListManager.java:200)
         at com.iplanet.im.client.swing.communicator.Communicator.<init>(Communicator.java:316)
         at com.iplanet.im.client.swing.BuddyList.showBuddyList(BuddyList.java:187)
         at com.iplanet.im.client.iIM.showBuddyList(iIM.java:1105)
         at com.iplanet.im.client.swing.Client.openNetlertViews(Client.java:379)
         at com.iplanet.im.client.swing.Client.showViews(Client.java:150)
         at com.iplanet.im.client.iIM.loadNetLert(iIM.java:613)
         at com.iplanet.im.client.swing.login.DefaultLoginDialog$1.run(DefaultLoginDialog.java:610)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
    Caused by: org.netbeans.lib.collab.CollaborationException: Error while doing the search
         at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:330)
         at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:262)
         at com.sun.im.service.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:171)
         ... 19 more
    Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
         at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:977)
         at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:938)
         at com.iplanet.im.client.manager.BuddyListManager.loadBuddyListNow(BuddyListManager.java:430)
         at com.iplanet.im.client.manager.BuddyListManager.init(BuddyListManager.java:200)
         at com.iplanet.im.client.swing.communicator.Communicator.<init>(Communicator.java:316)
         at com.iplanet.im.client.swing.BuddyList.showBuddyList(BuddyList.java:187)
         at com.iplanet.im.client.iIM.showBuddyList(iIM.java:1105)
         at com.iplanet.im.client.swing.Client.openNetlertViews(Client.java:379)
         at com.iplanet.im.client.swing.Client.showViews(Client.java:150)
         at com.iplanet.im.client.iIM.loadNetLert(iIM.java:613)
         at com.iplanet.im.client.swing.login.DefaultLoginDialog$1.run(DefaultLoginDialog.java:610)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)All of the users are under the same ldap branch, and previously I ran the command: /opt/SUNWiim/sbin/imadmin assign_services, for that ldap branch.
    Any suggestion? Thanks in advance....

    Finally we found the cause of the problems, for an strange reason if the user has the character '�' in his 'cn' o 'sn' he can't login, for example:
    bash-3.00# ldapsearch -x -h ldap -p 389 -b "c=mx,o=isp" -D "cn=DirectoryManager" -w password "cn=mx.m524217" cn sn uid
    version: 1
    dn: cn=mx.m524217, ou=people, c=mx, o=isp
    uid: m524217
    sn: VERA TREVI�O
    cn: mx.m524217
    When a user login to IM made a search of users if he search a user that can't login that search doesn't found nothing and the exception I posted before appears in the javaws console.
    But this only happened while we are using the gateway, if we point to the IM multiplexor directly we don't have all of this problems.
    Regards..

  • Auto check number pick while doing the F110

    HI All,
    Mentioned error message shown while doing the F110.
    Check number status at beginning of processing:
    My object is to pick the cheque numbers automatically ,while making the payments through F110.
    System is not consuming the numbers.
    Rgds
    Mani Kumar

    4 Possibilities -
    > Check if you have the RFFOUS_C program defined for the payment method in Country settings - FBZP.
    > Check if your variant for RFFOUS_C has the right payment method for printing checks.
    > Check if yo have any other proposal for same vendor already created but not finished the payment run for that. It might be due to duplication of entries.
    > Check your check-lot. Hope its not exhausted.
    Please search forums for more.
    Regards,
    Zubin

  • Cheque print through F-58 or FCH7

    Hi,
    While we are going to cheque print through F-58 / FCH7 we are facing some problem. Our invoice doc is FC USD along with TDS & we want to print the chq in LC INR here the TDS will be deduct in twice.
    Pls note that no problem is availabe in doc curr inr & chq doc inr.
    Pls advice
    regards
    avijit

    Hi,
    Our payment a/c doc post is perfectly but the chq print doc are print the net amt incorrect i.e tds deduction twice.
    regards
    avijit

  • ERROR WHILE DOING THE SERVICE ENTRY SHEET

    Hi All,
    I have budget INR 3000 & i created PR INR 2500 ,PO for the same amount INR 2500.Against the same i made INR 2000 down payment and it would as statistical in SAP. But while doing the service entry for same PO ,budget exceeded error coming.
    I seen Program RFFMS009 program also all DP figures updated as statistical ,but while clearing the DP through F-54 system getting budget exceeded error message.
    Kindly help me .we are in 4.7
    Former budgeting
    Rgds
    Manisuma

    Hi All,
    There is problem in Field status varaint
    Rgds
    Suma

  • CO-PA document is not created while doing the sale order cycle

    Dear Experts,
    I have 4 company codes in my controlling area. I did all CO-PA configuration. But CO-PA Document is generated in Only one company code. Remaining company codes CO-PA document is not created while doing the sale order cycle
    I’ve carried a standard sales cycle that contains sales order (VA01),
    and (VF04,VF02). System should generate 4
    documents as follows
    1) FI Document
    2) CO Document
    3) Profit Center Accounting Document
    4) COPA Document
    But in my case for 3 company codes only 3 documents are generated instead of CO-PA. But for one company code 4 documents are generated.
    In my case i did all settings Operation concern level and assign to controlling area. I can,t Understood why system is generating CO-PA document for Only one company
    Please suggest me where i miss the settings..
    Regards,
    Krishna.V

    Dear Ajay,
    Cost element category is 01. Because hear is one another company they have FI only all transactions they maintain through FI only. so hear we maintain Cost elements category 01.
    I think it is not a problem. because hear i got CO-PA document from one company. Remaining 3 company is not generated.
    Hear we maintained all gl's chart of acc level and cost elements also.
    Please suggest me...
    Regards,
    Krishna. v

  • Unit of measure differs while doing the vendor returns

    Hi All,
       While doing the vendor returns even if I mention the order unit(PO) for return qty,In vendor returns printout it is showing Baseuint of measure,pls let me know problem would be functional side or print programe side
    Regards
    Raj

    Thanks,
    Edited by: Hari Raj on Apr 12, 2008 1:21 PM

  • Error while executing the stored procedure through sender JDBC adapter

    Hi All,
    I am getting below error while executing the stored procedure through sender JDBC adapter.
    Database-level error reported by JDBC driver while executing statement 'exec SapgetNextEntity 'SalesOrder''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor.
    what is the problem? any idea to anyone...
    regards
    Ramesh

    hi Dharamveer,
    I am not getting below statement for your reply
    Try to use Refrence Cursor it will return u reference of resultset.
    I mention SP like this
    exec SapgetNextEntity 'SalesOrder'
    SapgetNextEntity -
    > SP Name
    SalesOrder----
    > Parameter I am passing...
    regards
    Ramesh

  • Error message while doing the Vendor Clearing

    Dear Team,
    I am encountering an issue while doing the Vendor clearing.I am nullifying the Vendor down payment against to RE document through residual posting system is showing the message like the below.
    No additional posting to asset
    Message no. AA 444
    Diagnosis
    A downpayment was already posted to the asset 80567 0 in the currently displayed document. Additional posting to the same asset in this document is not possible for technical reasons.
    Procedure
    Combine the two downpayments into one.
    Please kindly advice.The concern Down payment is showing under open item in FBL1N.Kindly advice how to proceed further.
    Thanks for the consideration.
    Regards,
    Suma.

    Hi Suma,
    First clear Down payment with using of F-54 & next you can clear normal OI.
    Rgds
    SumaMani

  • While doing the goods issue system is thruoghing an erro message no VL621

    hi ,
    actually while doing the goods issue we had put a validation if that filed(serial number) is not valid.like AVAILABLE then the system has through to an error message.but after that error message system is throughing an nother error.
    Risk of posting several mat.documents for one delivery->long text
        Message no. VL621
    Diagnosis
        Processing has been terminated because there is the risk that the system
        creates several material documents for this delivery.
    Procedure
        If this message occurs frequently, please note the exact situation and
        procedure as well as error messages and inform the system administrator.
    and we changed that error to warning also still we are getting that error message.
    how to stopthis error message.

    hi actually not for serial number check.
    there is a Z field in serial number master which is used for SIM number.
    that SIM number will be validated with available SIM number from another Z table.
    after this SIM error system is throughing this VL621 error after transaction terminated message.

  • Error in WBS element while doing the purchase requisition

    Dear All,
    While doing the purchase requisition in ps
    the error is : Item 010 WBS element IN05-PR09-16 . 04 budget exceeded.
    Kindly parovide any solution.
    Best Regards,
    Venkat.

    Hi Venkar,
    Check the available budget against WBSE - IN05-PR09-16 . 04 (S_ALR_87013558 - Budget/Actual/Commitment/Rem Plan/Assigned ), and the PR amount. Available Budget should be more than PR amount. Based on the tolerance limits set for the  budget profile, maintain the Current Budget with budget updates and try to create a PR accordingly.
    Hope this solves your problem !!
    Br
    Hari.
    Edited by: Hari Krishna Kudaravalli on Aug 20, 2009 3:25 PM

  • Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

    Have an existing ex2010 sp3 organization.
    Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line.  I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
    still get the same error.  The error itself in the log is pretty useless:
    [05/07/2013 01:19:13.0137] [0] **********************************************
    [05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
    [05/07/2013 01:19:13.0137] [0] **********************************************
    [05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
    [05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
    [05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
    [05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
    [05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
    [05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
    [05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
    [05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
    [05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
    [05/07/2013 01:19:40.0496] [0] Starting file's copying...
    [05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
    [05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
    [05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
    [05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
    [05/07/2013 01:19:59.0762] [0] File's copying finished.
    [05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
    [05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
    [05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
    [05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
    [05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
    [05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
    [05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
    [05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
    [05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
    [05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
    [05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
    [05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
    [05/07/2013 01:20:12.0044] [0] The following roles are installed:
    [05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
    [05/07/2013 01:20:12.0075] [0] Server Name=WEX1
    [05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
    [05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
    [05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
    [05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
    [05/07/2013 01:20:27.0841] [0] Applying default role selection state
    [05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
    [05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
    [05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
    [05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
    [05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.  See
    the Exchange setup log for more information on this error.
    [05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:21:04.0154] [0] End of Setup
    [05/07/2013 01:21:04.0154] [0] **********************************************

    Hi,
    The cause is clearly described in the log:
    [05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
    I'd suggest you check NIC settings and AD configuration.
    Hope it is helpful.
    Fiona Liao
    TechNet Community Support

Maybe you are looking for

  • ORA-01403 No data found on INSERT

    Hello, We have a program that does a lot of inserts in a simple table. Every now and then, we get the error ORA-01403 NO DATA FOUND. Our program is written in Delphi 7. We use the Oracle Data Access Components (ODAC, by CoreLab) to access the databas

  • There's a 10.5.3 update today 1/19/12

    Just a heads up - no idea what's in there but it just popped up for OSX Snow Leopard for me.    Investigating some more, given the issues with iTM this week. EDIT:  Also showing up for Windows.  Might be related to the iBooks announcement today, perh

  • How To Read Data From PCI6025E?

    Hi everyone, I need just to know: ''how can i read the data from PCI6025E with my C++ code"? What should i do for the use my signals(from pci6025E) in C++? Thanks a lot! 

  • AI CS3 FILE SIZE !

    Why are CS3 Illustator files, when saved, SO big? Even a business card file is huge...I am linking images, not embedding and still file size is large. Any thoughts? Thanks. Greg

  • Pages docs won't print on my Canon Pro 9000

    When I try to print a document, all I get is a blank page.  I copied the doc to Word, and it printed perfectly.  Has anybody else encountered this problem, and if so, how did you deal with it?