Problem while generating an Export DataSource in our Productive BW system

Hi all
We are trying to generate an export data source in our productive system and for any infocube and we are getting the error "SAP System has status 'not modifiable', Choose 'Display Object' or 'Cancel'." please see the following steps to reproduce the error, for ODS's everything it's working just fine
In the attached document, you will see he error
Best Regards,
BW Team
Steps to Reproduce the error
Please follow the next steps in order to reproduce the error:
1. Logon into BW production system
2. Go to TX RSA1
3. Find infocube "XXXX"
4. Right bottom on your mouse, go to "Additional Functions" and then select "Generate Export Data Source"
5. You will get the following error "SAP System has status 'not modifiable', Choose 'Display Object' or 'Cancel'."
The error is only happening with infocubes, for ODS's everything it's working just fine.
We already check several notes and in RSA1 the "Transport Connection" --> "Object Changeability" and everything seems to be OK, we used to do it but "something happened" and we cannot do it anymore
a"

Hi Ramanjaneyulu
Thanks for your soon response, we are trying to do this in order to copy data from our productive system to our quality system for testing purposes
We have a SAP 730 and SP08 so the note does not apply because we already have it
The problem it's only happening with infocubes and no loads had been executed in the system during this process; for ODS's we can generate the export datasource without any problem
thanks
Carlos Deciga

Similar Messages

IS- Retail- problem while generating delivery in WF30

Hi Guys,
I do have problem while generating deliveries after adjusting the stocks to stores and external customers.
T.Code WF30- Merchandise Distribution for CD/FT process
Scenario :!from DC to Stores process (1)
I am getting an error called for stores is "*shipping Data not Found for item 10,20 and 30" (using one article and 3 stores)*
Another scenario :2 from DC to external Customer(2)
I am getting an error called "No deliveries are generated"
(using one article and 2 customer)
shipping point determination was done in OVL2,
Picking area determination has done with few settings( if anybody guides what and where all the settings to be checked) I given Storage conditions in Article MD, entered Sto loc in Storage loc Deter and condition at IMG>LE>Shipping>Picking
Is it problem in Allocation Table Item category level for second one ?
for both scenarios i am using Allocation Table Item category AAFA
In AAFA,(Alloc Item Cate) SD Type is ZZTA and delivery type is not maintined..(what are the entries should be in the Alloc Tab Item Cat).
but in ZZTA sales order doc type(v0v8) Delivery type is LF
Plz help on this..
regards
Harish

Hi guys,
I got the answer and i am closing this thread.
Harish

Problems while generating the proxy definition

Hi Experts,
I am facing the error " Problems while generating the Proxy Definition! ", when creating the proxy definition, for a specific URL.
The URL to call the webservice is similar to "http://www3.XYZ.com/_vti_bin/newswebservice.asmx?WSDL" and is returning the appropriate XML code. Moreover accessing the webservice through browser, returns the expected response, too.
From the NWDS side, where we are creating the proxy, again, everything is fine, because we have already created two proxy definitions, in similar fashion, but for different WSDL links.
The only difference we are encountering is like, earlier the links were of type "www.abc.com/..." while the new URL is of type "www3.xyz.com/..." type. I hope this load balancing technique has hardly to do anything with it.
Any pointers for possible reasons and solutions will be of much help.
Regards,
Akhil Mishra

If you are consuming a web service in NWDS look below document and check if you are not missing any step:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0cf9e42-ccb0-2c10-d0a4-f5aa8a79e19a

Problems while generating the report........

Hi Experts,
I have genereated a new report on purchasing data, I am facing bellow problems while generating the report,
1) In rows one Invoice doc num is there, I am not getting result row for this object, I have given NEVER in supress result rows in properties of that object, but it's not showing.....how can i get result row for this object?
2) I am getting '#' for the blank values, How to remove these '#"s
Please help to solve my above problems,
Helpful answer will be awarded with points,
Thanks in advance,
Venkat.

Hi,
1) If you have only Invoice Num it does not shows the result Row .
2)If you display the characteristics as Key u will get as '#'. You can select as Text,then it will show 'Not Assigned'. (Hope you know that when the Values not updated from Infoprovider then # appears at output )
Hope it helps

Problem while generating hindi pdfs

Hi,
This is Dasaradh. I have one problem while generating pdfs in HIndi. Here i have used two properties files, one is English and another one is Hindhi. If the user selects English PDF is generates Suceesfully. But if the user selects hindhi then pdf is generated but in that pdf all the charcaters are in diferent format but not in hindi.Actually my hindhi properties file and that pdfgerneration jsp both are in UTF-8 format. Here i have used PDFWriter class for generating pdfs.
Can any one pls help for generating the hindhi pdfs.
Thanking You,
Dasaradh.P

Make sure that you use the correct and the same encoding thoroughout the complete process.
1) Save the propertiesfile with in that encoding. Even the most simplest texteditor (notepad) offers you an option list of charset encodings to be used during 'Save As'.
2) Read values from the propertiesfile with that encoding. Use a Reader where you specify the encoding in the constructor. Otherwise either the platform's default encoding (e.g. CP1252 in Windows) or the API's default encoding (e.g. ISO 8859-1 in java.util.Properties) will be used.
3) Display the values with that encoding. Specify the charset encoding in a <meta> tag in the HTML head.
A must-read: [http://www.joelonsoftware.com/articles/Unicode.html].

Error while generating export datasource in Test and Prod system

Hi experts,
I tried to generate export datasorce on a cube in teh testing system so that i can use this as a datasource for another cube. I did this so that i can transport all teh relevnt objects from D to T. But Iam gettin teh following erro msg
System setting does not allow changes to be made to object ISTD 80CRM_PRI.
while Prod system produces teh follwoing error msg
Changes to Repository or cross-client Customizing are not permitted
Choose 'Display object' or 'Cancel'.
After i have done this and when i go to the context menu of teh infocube i can see maintain export datasource option.
Also I couldn't see the infosource generated in Infosources ( FYI I have already done display generated objects under settings)
Can anyone tell me how to proceed further.
Thanks,
DV

Hi DV,
Generally export datasource are not included in the request from the test server. It gets generated automatically when (ODS,Cube) based on which the datasource s transported to production / quality .
I think solution should be try not to include export datasource, infosource ,transfer rules to request from dev server.
Hope that helps.
Regards
Mr Kapadia

Problem while generating Update progam for a Change Document Object

Hi,
I'm trying to deal with Change Document concept in a R/3 4.6C environment and to establish new Change Document object for my (Z)-table. I haven't using any namespace and created object with name ZTEST. Following the online documentation I came to the point, where I have to generate include program. I made all the nessesary inputs (using Z prefix) but faced
"Function module name is reserved for SAP"
Creating everything similarily using some of our registered namespaces (/somenamespace/) I succeed to generate the Update program and to integrate it in my Z-programs as well.
My question is: is it possible to use Change Document Object-names without predefined namespace - being a regular customer developer, but not an SAP developer - means, if I am allowed to manage programs in the customer namespace (Z,Y, X) only. If yes, how to do this?
Further (I decided not to open a new thread) - generated Update program uses
CALL FUNCTION 'xxxxx' IN UPDATE TASK
for creation of Change Numbers for generated Change Document Object. This CALL doesn't work when I implemented it in my Z-program, but when changed (IN UPDATE TASK was commented) - everything goes well and the system creates records in CDHDR/CDPOS tables for my object class and table.
Why is that? According to the documentation I shoud only fill appropriate variables for the Change Document Object (class, tr.code, etc.) and call generated FM, nothing is pointed out about any possible problems? Am I doing something wrong?
Well, to be precise, I think I have to give a sample:
1. I have a sample Z-table with few fields (their data elements are marked as Change-Document relevant).
2. Using own z-progam I created a new record for this z-table. Also fill all the nessesary variables included in the interface of generated FM for Change Document Object (for example - FM-mane CD_CALL_my_object).
3. I call the CDO FM.
4. Check what is happening (directly in both tables CDHDR/CDPOS or using FM CHANGEDOCUMENT_READ).
Further, I perfom the steps from 1 to 4 updating the created in previous loop record in my Z-table.
In both cases if the FM 'CD_CALL_my_object' is called IN UPDATE TASK nothing happens, but in case of direct call (without addition IN UPDATE TASK) the system behaves as expected. Well, obliously I can change the generated code for our production needs, but it doesn't seems to be the correct decision - in case of next possible modification of the Change Document Object definition, respectively in need of re-generation of the code.
Any hints are wellcome.
Thanks in advance.
Ivaylo Mutafchiev
Edited by: Ivaylo Mutafchiev on Jan 24, 2008 10:24 AM

"IN UPDATE TASK" resolved by myself. The one should explicitly call 'COMMIT WORK' from Z-program after CALL FUNCTION '...' IN UPDATE TASK in order to get changes in the CDHDR/CDPOS commited. The key in this issue for me was to check the documentation of CALL FUNCTION :-).
Regards,
Ivo

Problem while generating classification data-sources

Hi ,
I have one classification data-source 1CL_OVEN001 which is based on vendor master data and class type 10. I tried to added one field in this data-source . while generating data-source, I got some error like " Extractor can not be generated".
Then I searched on SAP site and got one note 1946309 . When I implemented this note and tried to generated data-source. Now I am getting another error.
"EXTRACT STRUCTURE IS NOT PERMITTED"
I have tried with several note but getting same error.
Please help.
Thanks in advance
Devesh Varshney

Hi,
What field you have added, if it is Keyfigure then make sure that you have added its unit.
-Sriram

How often should DBMCLI be run on our production XI system???

Good morning, XI Experts.
Our consultant setup this job to run weekly on our XI 2.0 system. Problem is that during the 4-5 hours that this job is running our polling adapters experience HTTP 500 Timeout errors and no data is able to be input into XI. We scheduled this job to run during off-hours but recently our production facilities have started working extended hours and we need to have the system available. I've included the joblog from this job at the bottom of this post.
Can anybody tell me exactly what this job does and whether or not we can schedule it less frequently???
Thanks,
Chad
============================
Job log overview for job: DBA:VERI____________@113000/7007 / 13492001
Date Time Message text
07/29/2007 11:30:37 Job started
07/29/2007 11:30:37 Step 001 started (program RSDBAJOB, variant &0000000000008, user ID SPGMR22)
07/29/2007 11:30:38 Execute logical command DBMCLI On host sapxiprd1
07/29/2007 11:30:38 Parameters:-d XIP -n sapxiprd1 -uUTL -tpi XIP -tpp
sapxidev1\sapmnt\trans\bin\TP_DOMAIN_XI1.PFL -tpc XIP util
07/29/2007 11:30:38 _execute verify
07/29/2007 16:03:43 OK
07/29/2007 16:03:43 Job finished

Another question:
When loading data, our process chains do the following steps, in this order:
1. Delete indexes
2. Load data (full load)
3. Create index
4. Construct DB statistics
5. Delete old request
6. Rollup aggregates
Does this order makes sense? It seems to me that you'd want to delete the old request first, then create the index and construct DB stats.

Error while generating 7 version datasource(DBConnect) view

Hi,
We are getting 'Cannot save DataSource 3.x (R3TR ISFS) on the database, since a DataSource (R3TR RSDS) already exists with the same name' while trying to generate a view. The datsource is in 7 version.
While investigating we could find that the 3.x datasources with views are getting successfully generated.
Please let us know if there is any alternate way of generating 7 version DBConnect datasource .
Thanks
Sreekanth

Hi Surekanth,
You can not have the two datasources with same technical name. If you want to use the existing DS in BI 7.0 version then you will have to migrate the existing DS only.
Otherwise you can use existing 3.X DS also.
Regards,
Durgesh.

Problem while emailing after exporting as PDF.

I have this strange problem. Basically, we have this VB6/SQL2005 application that exports crystal report into pdf attaches it to email and then send it in email...now most of the time and i would say about 95% of time, the email goes fine and they receive it fine. But recently it has started where they dont receive email on the other side. No rejection email message. No bounce back message.
Becuase of different email clients on the other side, it is very hard to pin point the problem.
We are using Crstal XI.
Any help would be appreciated..
Thanks
Raj

It may be the other mail server is detecting the attachement and blocking it. Check with them first.
Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Problem while generating stub and skeleton in ejb

Hi All,
I am learning Ejb,i developed a simple hello world application .And i am trying to generate stub and skeleton for that using weblogic.ejbc.I am getting the following error
C:\nkmb\ejb\HelloEjb>java weblogic.ejbc slb.jar
<Jun 22, 2006 9:55:35 AM EDT> <Warning> <EJB> <BEA-010212> <The EJB 'HelloBean(J
ar: slb.jar)' contains at least one method without an explicit transaction attri
bute setting. The default transaction attribute of Supports will be used for the
following methods: remote[hello()] >
C:\nkmb\ejb\HelloEjb\ejbcgen\examples\HelloBean_gbyfgg_Impl.java:11: cannot a
ccess java.io.Serializable
bad class file: C:\Program Files\Java\jre1.5.0_06\lib\rt.jar(java/io/Serializabl
e.class)
class file has wrong version 49.0, should be 48.0
Please remove or make sure it appears in the correct subdirectory of the classpa
th.
public final class HelloBean_gbyfgg_Impl
^
1 error
Exec failed .. exiting
can anybody help me to getting out of this problem.
thanks inadvance,
nkmb

Try the following forum (about EJB technology)
http://forum.java.sun.com/forum.jspa?forumID=13

Problem while generating Encrypted PDF in batch

Hi PPl
I am generating encrypted PDF in batch. I have one requirement to generate about 1 lakh PDFs.
But when i start my batch initially it works fine but after generating round about 25 PDF my program get
stuck at Document.copyToFile method and after that it again generates around 5-6 PDF and stops for a while
at the same place.
I have tried the same program to generate PDF without Encryption and it works very fine.
Guys i need your help to solve this issue.
Waiting for your valuable inputs.
Thanks

Moved to the Java Development - Crystal Reports forum.
Ludek

Problem while generating PDF using iText

Hi:
I have generated PDF using iText, where i have written all code in sequential flow.
<code>
com.lowagie.text.Document document = new com.lowagie.text.Document(PageSize.A4, 55, 5, 20, 20);
OutputStream outputstream = response.getOutputStream();
PdfWriter.getInstance(document,outputstream);
</code>
And i have added all fields in the document.
But my problem is how to display total pagecount on all pages e.g.1\20 (because i have generated PDF sequentially)
Also i want to add watermark on all pages.
So, can any body help me to solve this problem?
Thank You,
Balaji

sabre150 wrote:
Maybe http://itext-general.2136553.n4.nabble.com/
Nice pron link in there :/

Problem while generating pertner profile

hi ,
all.
while sending master data through ale we need to configure bd64(model view)
and go to menu-environment-generate partner profiles--when i am doing that i am getting
a message as
NO MESSAGE HAVE BEEN DEFINED FOR SELECTION CONDITION IN THE MODEL.
generally we need to get the successful port generation etc..
can any one help me in this regard as i cannot proceed further.
thanks in advance.

have you inserted the message type in the Model related to which the data needs to be sent across the systems (using add message type)?
Regards,
Abhishek

Problem while generating an Export DataSource in our Productive BW system

Similar Messages

Maybe you are looking for