Problem while generating copies in Adobe Forms

Hi Experts,
I'm trying to print two copies of my adobe form, I have changed the copies values from Output Options Pop up and printed the form. But i didn't get two copies of it instead I got only one copy. And I have checked SPAD configuration also, the document gets printed according to copy counter specified from the form but in case of adobe it is not. We tried with smartforms, it is working fine. Please see the following screenshots.
1. Entered the number of copies as 2.
2. After clicking on print button, I got the following ouput.
SPAD Configuration:
Please provide your valuable inputs.

Copies are not supported in adobe form. There are certain things which are different between the forms. SAP note 1009567 explains it clearly. Alternative solution to get multiple copies has been explained in the thread Multiple copies in Adobe form with different header text.
So,i'm closing this thread.

Similar Messages

Usage error while generating spool for adobe forms

I need to create a function module which would be called from a BRF. The function module must generate an adobe form and sent to the spool.
I get usage error at the call form function module level. could someone suggest if anything is missing in the below code.
""Local Interface:
*" IMPORTING
*" REFERENCE(I_FORM_NAME) TYPE FPNAME
*" REFERENCE(I_BP_DETAILS) TYPE ZRP_STRU_RTRN_BP_DETAILS
*" REFERENCE(I_AMT_DETAILS) TYPE ZRP_STRU_RTRN_AMT_DETAILS
*" EXPORTING
*" REFERENCE(E_RETURN) TYPE BAPIRET2_T
DATA : gv_fm_name TYPE rs38l_fnam,
ga_outputparams TYPE sfpoutputparams,
gs_docparams TYPE sfpdocparams,
le_result TYPE sfpjoboutput,
gs_output TYPE fpformoutput,
l_return TYPE bapiret2..
Get the Form function module name
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = i_form_name
IMPORTING
e_funcname = gv_fm_name
E_INTERFACE_TYPE =
Open Print Job
ga_outputparams-device = 'PRINTER'.
ga_outputparams-nodialog = 'X'.
ga_outputparams-preview = space.
ga_outputparams-dest = 'LP01'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = ga_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
call the generated Function Module
gs_docparams-langu = 'E'.
gs_docparams-country = 'US'.
CALL FUNCTION gv_fm_name "'/1BCDWB/SM00000014'
EXPORTING
/1bcdwb/docparams = gs_docparams
is_bp_details = i_bp_details
is_return_details = i_amt_details
IMPORTING
/1bcdwb/formoutput = gs_output
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc EQ 0.
Close spool job
CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
e_result = le_result
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
ELSE.
l_return-type = 'E'.
l_return-message = 'Print Error'.
APPEND l_return TO e_return.
ENDIF.

Suri , Have you solve this please replly as i am facing such a problem

IS- Retail- problem while generating delivery in WF30

Hi Guys,
I do have problem while generating deliveries after adjusting the stocks to stores and external customers.
T.Code WF30- Merchandise Distribution for CD/FT process
Scenario :!from DC to Stores process (1)
I am getting an error called for stores is "*shipping Data not Found for item 10,20 and 30" (using one article and 3 stores)*
Another scenario :2 from DC to external Customer(2)
I am getting an error called "No deliveries are generated"
(using one article and 2 customer)
shipping point determination was done in OVL2,
Picking area determination has done with few settings( if anybody guides what and where all the settings to be checked) I given Storage conditions in Article MD, entered Sto loc in Storage loc Deter and condition at IMG>LE>Shipping>Picking
Is it problem in Allocation Table Item category level for second one ?
for both scenarios i am using Allocation Table Item category AAFA
In AAFA,(Alloc Item Cate) SD Type is ZZTA and delivery type is not maintined..(what are the entries should be in the Alloc Tab Item Cat).
but in ZZTA sales order doc type(v0v8) Delivery type is LF
Plz help on this..
regards
Harish

Hi guys,
I got the answer and i am closing this thread.
Harish

Problems while generating the proxy definition

Hi Experts,
I am facing the error " Problems while generating the Proxy Definition! ", when creating the proxy definition, for a specific URL.
The URL to call the webservice is similar to "http://www3.XYZ.com/_vti_bin/newswebservice.asmx?WSDL" and is returning the appropriate XML code. Moreover accessing the webservice through browser, returns the expected response, too.
From the NWDS side, where we are creating the proxy, again, everything is fine, because we have already created two proxy definitions, in similar fashion, but for different WSDL links.
The only difference we are encountering is like, earlier the links were of type "www.abc.com/..." while the new URL is of type "www3.xyz.com/..." type. I hope this load balancing technique has hardly to do anything with it.
Any pointers for possible reasons and solutions will be of much help.
Regards,
Akhil Mishra

If you are consuming a web service in NWDS look below document and check if you are not missing any step:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0cf9e42-ccb0-2c10-d0a4-f5aa8a79e19a

Problems while generating the report........

Hi Experts,
I have genereated a new report on purchasing data, I am facing bellow problems while generating the report,
1) In rows one Invoice doc num is there, I am not getting result row for this object, I have given NEVER in supress result rows in properties of that object, but it's not showing.....how can i get result row for this object?
2) I am getting '#' for the blank values, How to remove these '#"s
Please help to solve my above problems,
Helpful answer will be awarded with points,
Thanks in advance,
Venkat.

Hi,
1) If you have only Invoice Num it does not shows the result Row .
2)If you display the characteristics as Key u will get as '#'. You can select as Text,then it will show 'Not Assigned'. (Hope you know that when the Values not updated from Infoprovider then # appears at output )
Hope it helps

Problem while generating hindi pdfs

Hi,
This is Dasaradh. I have one problem while generating pdfs in HIndi. Here i have used two properties files, one is English and another one is Hindhi. If the user selects English PDF is generates Suceesfully. But if the user selects hindhi then pdf is generated but in that pdf all the charcaters are in diferent format but not in hindi.Actually my hindhi properties file and that pdfgerneration jsp both are in UTF-8 format. Here i have used PDFWriter class for generating pdfs.
Can any one pls help for generating the hindhi pdfs.
Thanking You,
Dasaradh.P

Make sure that you use the correct and the same encoding thoroughout the complete process.
1) Save the propertiesfile with in that encoding. Even the most simplest texteditor (notepad) offers you an option list of charset encodings to be used during 'Save As'.
2) Read values from the propertiesfile with that encoding. Use a Reader where you specify the encoding in the constructor. Otherwise either the platform's default encoding (e.g. CP1252 in Windows) or the API's default encoding (e.g. ISO 8859-1 in java.util.Properties) will be used.
3) Display the values with that encoding. Specify the charset encoding in a <meta> tag in the HTML head.
A must-read: [http://www.joelonsoftware.com/articles/Unicode.html].

Error While Genrating Document in ADOB Form

Hello Everybody ,
When I used SFP tcode for Design ADOB Form Layout I am getting Error " Error While Generating Document " .
Plz Sugget me how to resolved it ...
Regards,
Sandeep Jadhav

Hi,
You need additional License to create SAP Interactive Forms by Adobe
Check the SAP Note No. 750784
If you already have got the License then please check the below link and see if it helps you.
http://help.sap.com/saphelp_nw70/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
Let us know if this information is useful to you.
with regards,
Parin Hariyani

Problem with deep structure in Adobe Forms

Hi ,
I am converting smartform into adobe forms. While converting the program code in the code initialization of the smart forms also get transformed to adobe forms the problem is my internal table is of type deep structure while passing it through the tables parameter i am getting error in adobe forms .But while passing the internal table through import parameter its not giving error.The same code works fine with smartforms. I dont know why its not taking the structure of internal table in adobe forms properly .It happens only for deep strucure formal normal tables it works fine in table parameters .If any one has come across this scenario please share your ideas.
Best Regards,
Sreeram

If I were you, I would never do this through any program. The only secure, reliable way is to rewrite everything by your own hands. Even if we could argue, your way works as well (and could be faster at the beginning), at the firt moment you will be asked to perform any tiny change in this "imported" thing, you will cry your eyes out (and understand why it is the only useful way to rewrite everything manually).
regards Otto

Problem with data connection in adobe forms using wsdl file....

Hi Experts,
I am tryning to create a adobe form in which i need to create a data connection using a WSDL file. But i am coing across the problem as cannot find the path of th url.
i tried to create the WSDL in 2 ways and i came across the same error.:
1) using the URL of the WSDL file generated
2)alos saved the file as WSDL file on desktop, and used to create
in both cases i am coming across the same error.
Note: i am not creating using webdynpro, i am doing using ABAP.
Regards,
Madhu

@ankur17
Won't insult you by suggesting that you haven't already checked Settings > mobile network > Data connection = On, as you have confirmed already that Internet Sharing is working.
You may need to go to Settings > about > reset your phone and see if by setting up phone afresh it reads settings and applies correctly from SIM card.
Is Network Setup application included or available from Marketplace > Nokia Collection as might be worth running this application too?
If this issue still remains you may need to have device software re-installed at Nokia Care Point to try to resolve this.
Happy to have helped forum with a Support Ratio = 42.5

Multiple copies in Adobe form with different header text

Hi All,
I have created Adobe form for Invoice and now my requirement is when we create an invoice it should generate 4 copies with different texts like original copy, duplicate copy and triplicate copy.
I know its possible in samrtforms using the copy window and maintaing text there.Is it possible in adobe form , if yes how can we achieve this.
Regards
Lalit

Are you using a custom driver program?
If yes, then loop the function module with the number of copies you have.
the copy name should be a variable which should be passed to the form in the loop change the value of the copy control accordingly.
Please let me know, if you see any issues.
Thanks,
Rakesh

Problem with Web Dynpro ABAP Adobe form Access via 'NULL' object reference

Hi All!
I'm a beginner of Adobe form.
problem 1:
I tried to display data in Adobe interactive form according to the tutorial :https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/7783. [original link is broken] [original link is broken] [original link is broken]
I checked every step, but unfortunately it reported an error: Access via 'NULL' object reference not possible. I found that the error happens when trying to get element of the context node.
I also have such problem when I was studying the tutorial https://wiki.sdn.sap.com/wiki/display/WDABAP/CallAdobeFormthroughABAPWebDynpro.
problem 2:
I can't input any data in input box or click any button even if I selected the property 'enabled' of the interactive form while my colleague can do it on his computer. Does it means that there are some thing wrong with my adobe reader?
Hope anyone could save me,
Thanks & Regards,
Murloc

>
tomcat123 wrote:
> Hi All!
> I'm a beginner of Adobe form.
> problem 1:
> I tried to display data in Adobe interactive form according to the tutorial :https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/7783. [original link is broken] [original link is broken] [original link is broken]
> I checked every step, but unfortunately it reported an error: Access via 'NULL' object reference not possible. I found that the error happens when trying to get element of the context node.
> I also have such problem when I was studying the tutorial https://wiki.sdn.sap.com/wiki/display/WDABAP/CallAdobeFormthroughABAPWebDynpro.
Check that you have entries in the Table MARI. else you will get this message.
> problem 2:
> I can't input any data in input box or click any button even if I selected the property 'enabled' of the interactive form while my colleague can do it on his computer. Does it means that there are some thing wrong with my adobe reader?
>
Compare the adobe live cycle version. it will work fine with 7.0/7.1
> Hope anyone could save me,
> Thanks & Regards,
> Murloc

Issue while uploading a offline Adobe form

Hi i`m working in Offline Adobe form.I`m able to send a form to vendor and he is able to recieve and download the form.But while uploading the form some "Runtime uncaught Exception occurs".
The Exception is CX_FP_RUNTIME SYSTEM and trigger location of Exception is
CL_FP_PDF_OBJECT..I couldn`t resolve that...Plz help me out...

Please specify when the error occurs. According to my experience, the problem can be that the transformation (XML data --> ABAP variable) has found some unexpected character. If my guess is right you need to debug this trasnformation and remove the unwanted character before the transformation starts.

Problem in submit button on adobe form integrated with web dynpro

Hello,
I'm facing prob in triggering web dynpro event onSubmit for Interactive form.
I've created a submit button from web dynpro activex pallete on adobe form (integrated with web dynpro) to send the form as email.
Then in the web dynpro view where this form is embedded i have created an action against onSubmit event and called a method within this.
However, on clicking Submit button this event is not getting triggered.
Please let me know what is lacking in this process?
Thanks.

Hi,
I am also facing the same problem. i have developed a simple scenario under which user have to input his/her details and on submit button it will be updated to database.
I have tried the above solution but after adopting this solution all the editable fields become non-editable.
so the above solution is not working for me could you help me out.
I think ... try this....
When you create the Adobe Form from WebDynpro, you need to follow one step in SFP Transaction or inSE80 transaction. Open the Adobe Form in any one the transaction and now in SAP menu bar "Utilities" in that you will find the "INSERT THE WEBDYNPRO SCRIPT" just click on that one. Then you will see a new Script Object is being created with the name "ContainerFoundation_JS" under the "Variables" in the Heirarchy of the Object Pallete of the Adobe Form.
This step is mandatory to use the SUBMIT Button of the "WebDynpro Native", to trigger the OnSubmit event of the WebDynpro.
Thanks
Edited by: shailendra2sap on Mar 6, 2009 12:24 PM

Problem when generating an non-interactive form in Web Dynpro java.

Hi,
I'm trying to create a PDFDocument using a creation context in java. Everything works fine when the Interactive property of the creation context is set to true. When I change it to false however, the Web dynpro application hangs and eventually throws the following exception:
java.net.SocketTimeoutException: Read timed out
   at java.net.SocketInputStream.socketRead0(Native Method)
   at java.net.SocketInputStream.read(SocketInputStream.java:129)
   at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
   at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
   at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
I'm wondering why this exception occurs when i'm generating a non interactive form and never appears when i'm generating a form with the Interactive property set to true.
Any ideas?
Edited by: Arjan Nieuwenhuizen on Feb 25, 2008 3:24 PM

Yeah I know changing the form properties will solve my problem, but since i'm developing a training for Interactive Forms in Web Dynpro Java, I wanted to figure out why the (static / non-interactive) combination didn't work, turned out to be a template problem, which i still didn't figure out, except the fact that having flowed content on your template is not the problem.
My ideas about your question:
When we have the layout of an Interactive Form, its clear if it's meant to be static or dynamic, we don't know however, if it's interactive or non-interactive.
I don't think we can judge a layout to have an Interactive or non-interactive purpose, can depend on the situation in which the same form is shown/used:
- One moment it can be interactive, e.g. user is filling in the form, can enter data etc.
- Next moment it can be non-interactive, e.g. form is shown to another user.
So it's more the scenario/situation that determines if the form is interactive or non-interactive.

Problem with Table display in Adobe Form of Web Dynpro ABAP

Hi Team,
I'm trying to display a table in Adobe Print Form (not interactive). The table is bound to the context node in the Web Dynpro ABAP where the cardinality is 0:N. I get a short dump. Don't know what to do here. I'm able to display individual fields from my context successfully. Looks like something is missing when I try to display a table. Any pointers to display a data table in Adobe? Any step by step example you know of where I can find out what I did wrong? Many thanks for your time
We are on support pack SP06 on 2004S release.
DUMP INFORMATION:
Short text
    Access via 'NULL' object reference not possible.
What happened?
    Error in the ABAP Application Program The current ABAP program "CL_WD_ADOBE_SERVICES==========CP" had to be terminated because it has come across a statement that unfortunately cannot be executed.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure "CREATE_PDF" "(METHOD)", nor was it propagated by a RAISING clause.

Hi Thomas,
We upgraded our system(2004S) to SP10 so that we can use the ADOBE form printing in Web Dynpro ABAP but could not apply note 1034425 because of the validity constraints in SNOTE. All the pre-requisite notes are already in the system apart from one note 1029721 which talks about supporting input helps. We don't want to use input helps in our system and cannot upgrade to SP11 because of problems with Business functionality.
Questions:
1) Is note 1034425 absolutely dependent on 1029721?
2) If NOT, can someone please correct the validity so that we can implement using SNOTE.
3) Would it be OK if we manually apply the changes specified in 1034425 without implementing 1029721?
4) If all of the above is not applicable, is there any other note which fixes the above mentioned short dump.
Your help in this matter will greatly help us in using the ADOBE services provided by SAP WDA.
Thanks much

Problem while generating copies in Adobe Forms

Similar Messages

Maybe you are looking for