Problem while generating pertner profile
hi ,
all.
while sending master data through ale we need to configure bd64(model view)
and go to menu-environment-generate partner profiles--when i am doing that i am getting
a message as
NO MESSAGE HAVE BEEN DEFINED FOR SELECTION CONDITION IN THE MODEL.
generally we need to get the successful port generation etc..
can any one help me in this regard as i cannot proceed further.
thanks in advance.
have you inserted the message type in the Model related to which the data needs to be sent across the systems (using add message type)?
Regards,
Abhishek
Similar Messages
-
IS- Retail- problem while generating delivery in WF30
Hi Guys,
I do have problem while generating deliveries after adjusting the stocks to stores and external customers.
T.Code WF30- Merchandise Distribution for CD/FT process
Scenario :!from DC to Stores process (1)
I am getting an error called for stores is "*shipping Data not Found for item 10,20 and 30" (using one article and 3 stores)*
Another scenario :2 from DC to external Customer(2)
I am getting an error called "No deliveries are generated"
(using one article and 2 customer)
shipping point determination was done in OVL2,
Picking area determination has done with few settings( if anybody guides what and where all the settings to be checked) I given Storage conditions in Article MD, entered Sto loc in Storage loc Deter and condition at IMG>LE>Shipping>Picking
Is it problem in Allocation Table Item category level for second one ?
for both scenarios i am using Allocation Table Item category AAFA
In AAFA,(Alloc Item Cate) SD Type is ZZTA and delivery type is not maintined..(what are the entries should be in the Alloc Tab Item Cat).
but in ZZTA sales order doc type(v0v8) Delivery type is LF
Plz help on this..
regards
HarishHi guys,
I got the answer and i am closing this thread.
Harish -
Problems while generating the proxy definition
Hi Experts,
I am facing the error " Problems while generating the Proxy Definition! ", when creating the proxy definition, for a specific URL.
The URL to call the webservice is similar to "http://www3.XYZ.com/_vti_bin/newswebservice.asmx?WSDL" and is returning the appropriate XML code. Moreover accessing the webservice through browser, returns the expected response, too.
From the NWDS side, where we are creating the proxy, again, everything is fine, because we have already created two proxy definitions, in similar fashion, but for different WSDL links.
The only difference we are encountering is like, earlier the links were of type "www.abc.com/..." while the new URL is of type "www3.xyz.com/..." type. I hope this load balancing technique has hardly to do anything with it.
Any pointers for possible reasons and solutions will be of much help.
Regards,
Akhil MishraIf you are consuming a web service in NWDS look below document and check if you are not missing any step:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0cf9e42-ccb0-2c10-d0a4-f5aa8a79e19a -
Problems while generating the report........
Hi Experts,
I have genereated a new report on purchasing data, I am facing bellow problems while generating the report,
1) In rows one Invoice doc num is there, I am not getting result row for this object, I have given NEVER in supress result rows in properties of that object, but it's not showing.....how can i get result row for this object?
2) I am getting '#' for the blank values, How to remove these '#"s
Please help to solve my above problems,
Helpful answer will be awarded with points,
Thanks in advance,
Venkat.Hi,
1) If you have only Invoice Num it does not shows the result Row .
2)If you display the characteristics as Key u will get as '#'. You can select as Text,then it will show 'Not Assigned'. (Hope you know that when the Values not updated from Infoprovider then # appears at output )
Hope it helps -
Problem while generating hindi pdfs
Hi,
This is Dasaradh. I have one problem while generating pdfs in HIndi. Here i have used two properties files, one is English and another one is Hindhi. If the user selects English PDF is generates Suceesfully. But if the user selects hindhi then pdf is generated but in that pdf all the charcaters are in diferent format but not in hindi.Actually my hindhi properties file and that pdfgerneration jsp both are in UTF-8 format. Here i have used PDFWriter class for generating pdfs.
Can any one pls help for generating the hindhi pdfs.
Thanking You,
Dasaradh.PMake sure that you use the correct and the same encoding thoroughout the complete process.
1) Save the propertiesfile with in that encoding. Even the most simplest texteditor (notepad) offers you an option list of charset encodings to be used during 'Save As'.
2) Read values from the propertiesfile with that encoding. Use a Reader where you specify the encoding in the constructor. Otherwise either the platform's default encoding (e.g. CP1252 in Windows) or the API's default encoding (e.g. ISO 8859-1 in java.util.Properties) will be used.
3) Display the values with that encoding. Specify the charset encoding in a <meta> tag in the HTML head.
A must-read: [http://www.joelonsoftware.com/articles/Unicode.html]. -
Problem while generating classification data-sources
Hi ,
I have one classification data-source 1CL_OVEN001 which is based on vendor master data and class type 10. I tried to added one field in this data-source . while generating data-source, I got some error like " Extractor can not be generated".
Then I searched on SAP site and got one note 1946309 . When I implemented this note and tried to generated data-source. Now I am getting another error.
"EXTRACT STRUCTURE IS NOT PERMITTED"
I have tried with several note but getting same error.
Please help.
Thanks in advance
Devesh VarshneyHi,
What field you have added, if it is Keyfigure then make sure that you have added its unit.
-Sriram -
Error while generating Partner profiles
Hi,
I am not able to crate the Partner profile. When I try to Generate the Partner Profiles from the Distribution model (Masterial Master) it give me following error,
"Outbound parameters for message type MATMAS MATMAS05 could not be created
Please enter a valid value for the output mode
Outbound parameters for message type SYNCH SYNCHRON could not be created
Please enter a valid value for the output mode"
Can anybody tell me how to solve this problem??
Thanks in stack.How did you try to generate the Partner profile?
Can you pls try the following...
execute report "RBDCUS15" and give the model view/partner for which the entries needs to be generated.
Also, give the appropriate values for "Outbound Parameters" like version, packet size and output mode.
Thanks,
Renjith -
BW Issues while generating authorization profiles RSSB_GENERATE_AUTH progm.
Hello,
We loaded ZTCADS02 hierarchy datastore authorization template with the following data fields mapping and along with the other authorization templates (ZTCADS01, DS03)
when I try to generate the authorization profiles using RSSB_GENERATE_AUTHORIZATIONS program, I am getting the following error
Hierarchy YES_BRANDS (version, key date 12/31/9999) does not exist Message no. RSSBR050
Here are the fields and field contents on ZTCADS02 datastore. Am I loading wrong data to any of the fields?? I tried couple of combinations for Hierarchy name (0TCTHIENM) but none of this helps me in successful generation of the profiles.
0TCTHIENM = YES_BRANDS/99991231//0BP_GRP
0TCTHIENM = YES_BRANDS
0TCTUSERNM User CARLMGRN1
0TCTSYSID BW System SBC100
0TCTAUTH Authorization (Tech) ZBP_GRP
0TCTADTO Validity, to 99991231
0TCTIOBJNM InfoObject 0TCTAUTHH
0TCTHIENM Hierarchy Name YES_BRANDS
0TCTHIEVERS Hierarchy Version A
0TCTHIEDATE Hierarch, Valid to 99991231
0TCTNIOBJNM Node (InfoObject) 0BP_GRP
0TCTATYPE Type of Authorizatn 2
0TCTOBJVERS Object Version A
0TCTADFROM Validity, from 20061113
0TCTNODE Nodes 454BA58E856300F6000000000A173125
0TCTACOMPM Validity Period 1
0TCTTLEVEL Hierarchy Level 9
0TCTNDEF Default Value Y
Infoobject to be checked is 0BP_GRP which is hierarchy check
ZBP_GRP is custom authorization object created by me with fields actvt, 0BP_GRP and 0TCTAUTHH fields via RSSM
All suggestions are really appreciated and promise to reward very good points,
for all good answers.
Regards
SreeniIssue is resolved. There was a problem with the data load.
Thanks
Sreeni -
Problem while generating Update progam for a Change Document Object
Hi,
I'm trying to deal with Change Document concept in a R/3 4.6C environment and to establish new Change Document object for my (Z)-table. I haven't using any namespace and created object with name ZTEST. Following the online documentation I came to the point, where I have to generate include program. I made all the nessesary inputs (using Z prefix) but faced
"Function module name is reserved for SAP"
Creating everything similarily using some of our registered namespaces (/somenamespace/) I succeed to generate the Update program and to integrate it in my Z-programs as well.
My question is: is it possible to use Change Document Object-names without predefined namespace - being a regular customer developer, but not an SAP developer - means, if I am allowed to manage programs in the customer namespace (Z,Y, X) only. If yes, how to do this?
Further (I decided not to open a new thread) - generated Update program uses
CALL FUNCTION 'xxxxx' IN UPDATE TASK
for creation of Change Numbers for generated Change Document Object. This CALL doesn't work when I implemented it in my Z-program, but when changed (IN UPDATE TASK was commented) - everything goes well and the system creates records in CDHDR/CDPOS tables for my object class and table.
Why is that? According to the documentation I shoud only fill appropriate variables for the Change Document Object (class, tr.code, etc.) and call generated FM, nothing is pointed out about any possible problems? Am I doing something wrong?
Well, to be precise, I think I have to give a sample:
1. I have a sample Z-table with few fields (their data elements are marked as Change-Document relevant).
2. Using own z-progam I created a new record for this z-table. Also fill all the nessesary variables included in the interface of generated FM for Change Document Object (for example - FM-mane CD_CALL_my_object).
3. I call the CDO FM.
4. Check what is happening (directly in both tables CDHDR/CDPOS or using FM CHANGEDOCUMENT_READ).
Further, I perfom the steps from 1 to 4 updating the created in previous loop record in my Z-table.
In both cases if the FM 'CD_CALL_my_object' is called IN UPDATE TASK nothing happens, but in case of direct call (without addition IN UPDATE TASK) the system behaves as expected. Well, obliously I can change the generated code for our production needs, but it doesn't seems to be the correct decision - in case of next possible modification of the Change Document Object definition, respectively in need of re-generation of the code.
Any hints are wellcome.
Thanks in advance.
Ivaylo Mutafchiev
Edited by: Ivaylo Mutafchiev on Jan 24, 2008 10:24 AM"IN UPDATE TASK" resolved by myself. The one should explicitly call 'COMMIT WORK' from Z-program after CALL FUNCTION '...' IN UPDATE TASK in order to get changes in the CDHDR/CDPOS commited. The key in this issue for me was to check the documentation of CALL FUNCTION :-).
Regards,
Ivo -
Problem while generating stub and skeleton in ejb
Hi All,
I am learning Ejb,i developed a simple hello world application .And i am trying to generate stub and skeleton for that using weblogic.ejbc.I am getting the following error
C:\nkmb\ejb\HelloEjb>java weblogic.ejbc slb.jar
<Jun 22, 2006 9:55:35 AM EDT> <Warning> <EJB> <BEA-010212> <The EJB 'HelloBean(J
ar: slb.jar)' contains at least one method without an explicit transaction attri
bute setting. The default transaction attribute of Supports will be used for the
following methods: remote[hello()] >
C:\nkmb\ejb\HelloEjb\ejbcgen\examples\HelloBean_gbyfgg_Impl.java:11: cannot a
ccess java.io.Serializable
bad class file: C:\Program Files\Java\jre1.5.0_06\lib\rt.jar(java/io/Serializabl
e.class)
class file has wrong version 49.0, should be 48.0
Please remove or make sure it appears in the correct subdirectory of the classpa
th.
public final class HelloBean_gbyfgg_Impl
^
1 error
Exec failed .. exiting
can anybody help me to getting out of this problem.
thanks inadvance,
nkmbTry the following forum (about EJB technology)
http://forum.java.sun.com/forum.jspa?forumID=13 -
Problem while generating Encrypted PDF in batch
Hi PPl
I am generating encrypted PDF in batch. I have one requirement to generate about 1 lakh PDFs.
But when i start my batch initially it works fine but after generating round about 25 PDF my program get
stuck at Document.copyToFile method and after that it again generates around 5-6 PDF and stops for a while
at the same place.
I have tried the same program to generate PDF without Encryption and it works very fine.
Guys i need your help to solve this issue.
Waiting for your valuable inputs.
ThanksMoved to the Java Development - Crystal Reports forum.
Ludek -
Problem while generating PDF using iText
Hi:
I have generated PDF using iText, where i have written all code in sequential flow.
<code>
com.lowagie.text.Document document = new com.lowagie.text.Document(PageSize.A4, 55, 5, 20, 20);
OutputStream outputstream = response.getOutputStream();
PdfWriter.getInstance(document,outputstream);
</code>
And i have added all fields in the document.
But my problem is how to display total pagecount on all pages e.g.1\20 (because i have generated PDF sequentially)
Also i want to add watermark on all pages.
So, can any body help me to solve this problem?
Thank You,
Balajisabre150 wrote:
Maybe http://itext-general.2136553.n4.nabble.com/
Nice pron link in there :/ -
Problem while generating an Export DataSource in our Productive BW system
Hi all
We are trying to generate an export data source in our productive system and for any infocube and we are getting the error "SAP System has status 'not modifiable', Choose 'Display Object' or 'Cancel'." please see the following steps to reproduce the error, for ODS's everything it's working just fine
In the attached document, you will see he error
Best Regards,
BW Team
Steps to Reproduce the error
Please follow the next steps in order to reproduce the error:
1. Logon into BW production system
2. Go to TX RSA1
3. Find infocube "XXXX"
4. Right bottom on your mouse, go to "Additional Functions" and then select "Generate Export Data Source"
5. You will get the following error "SAP System has status 'not modifiable', Choose 'Display Object' or 'Cancel'."
The error is only happening with infocubes, for ODS's everything it's working just fine.
We already check several notes and in RSA1 the "Transport Connection" --> "Object Changeability" and everything seems to be OK, we used to do it but "something happened" and we cannot do it anymore
a"Hi Ramanjaneyulu
Thanks for your soon response, we are trying to do this in order to copy data from our productive system to our quality system for testing purposes
We have a SAP 730 and SP08 so the note does not apply because we already have it
The problem it's only happening with infocubes and no loads had been executed in the system during this process; for ODS's we can generate the export datasource without any problem
thanks
Carlos Deciga -
Problem BD64- Generate Partner Profile
Hello everybody,
After creation the model view in the transaction SCUA i go in the transaction BD64 and i try to generate the partner profile to the child systems but i got an error as below:
Object type US, ID BASIS unknown (please observe upper/lower case)
Message no. E0624
Diagnosis
Object BASIS of type US is not known in the system.
Procedure
Enter a valid object and check the type.
Make sure upper case and lower case are used correctly.
Somebody can help me?
Best Regards,
Fábio Karnik TchobnianHi,
your question is not really related to SQL Server but to the CUA. Please post your question in a different forum (Netweaver Administrator maybe) and I am sure you will get answer there.
Sven -
Problem while generating reports in BI
Hi All ....
I have created all the info objects and info cubes.... they are showing data which i have extracted from R\3 system ...all is correct ...
But now i m facing problem when i am generating reports...then its showing fields in Excel sheet but not data... data is there in R/3 system ..but i am not getting any reason why this is not coming in reports.
Please help me out
Thanx
ShivanjaliHi,
You can check it through query designer.
Just click the button on the top of the quesry designer it will have sign sqaure with a green circle on the top of square.The description says web.....
It will take you the web adn then give your login and execute it.
If you have authorization issue then it will say No AUthorization issue or everything is filtered out.
If your cube doesn't data for the selections you are giving at the runtime of the report then it will just give a message no applicable data found.
If you are not getting these messages then you should check the rows of the report as what have you put there has value in the cube or not.
Thanks
Ajeet
Thanks
Maybe you are looking for
-
Since I get Adobe revel my photos in "Mobile albums" on my iMac disappeared. "Mobile albums" are accessible on mobile devices only. How to get back mobile albums on my iMac?
-
I bought iTunes Match; nonetheless, on iTunes Radio I routinely get ads. Apple says that with iTunes Match one should not get ads. Whaddup?
-
Trying to understand WebDynpro demands on SLD
Hello all, We're looking at newer versions of ESS/MSS using Web Dynpro and at the same time looking at a formal SLD architecture, which will probably be toward the centralized end of the spectrum. What I need to understand is the performance requirem
-
PCMICA Media Card Reader only mounts once per session
After I restart and insert my PCMICA media card reader will show up on the desktop but only once. After I eject the card and reinstall it will not show up on the desktop. The card appears in the menu bar but no where else not on the desktop or in a f
-
SQLException: Protocol Violation
Hello! I have a problem with my connection to oracle, I have a driver connection, user and password. I try this connection with two database but it fail with one of them. I tried whit the classes111.zip, and classes12.zip but the result is the same..