Problem while implementing OSS note 1077403
Hi,
I am trying to implement a OSS note ( 1077403) using SNOTE transaction. When I download the note, the status of this note is u201CCan be implementedu201D. It creates few standard programs which are utility programs related to Unicode conversion. While implementing this note, I am facing the issue "Objects can only be created in SAP package" and some of the objects in the note are not created. The note status becomes u2018Incompletely Implementedu2019.
Can you please suggest what could be the issue?
HI,
For more efficence direct link to note Note 1077403 - Cluster table check using SDBI_CLUSTER_CHECK
Have you a basis release version >= 6.20 ?
you can use transaction SNOTE to implement the version for Basis Release 6.20 and higher.
Rgds
Edited by: stéphane mouraux on Mar 1, 2010 6:31 PM
Similar Messages
-
Problem while implementing OSS note(1157904)
HI,
I am facing a problem while implementing OSS note 1157904.I am getting a message "no valid correction instruction".
I checked support pack levels .I checked source code also, it is not implemented.
Regards,
Pratap.You need to get back to SAP. Sometimes notes have incorrect information in them.
-
I'm facing problem while applying OSS Note 1046758
Hi gurus,
I'm facing problem while applying OSS Note 1046758. That note is asking to create <b>J_1IEWT_ACKN_N</b> table.
After creating the table I went to the UTILITIES menu => TABLE MAINTENANCE GENERATOR.
Then OSS Note 1046758 is asking us to give the function group name as <b>J_1IEFILE</b>.
Next Choose <b>One Step</b>.
and then <b>Find Screen Numbers</b>.
While clicking the CREATE button it is not allowing me to assign the function group group J_1IEFILE.
How to overcome this problem.
Very urgent.
Any answers are welcome and will be rewarded .
Regards,
Jacob Charles S.Hi Sheeba,
I have applied the follwoing notes.
1046758 -- To display acknowledgement number in Form No 16A
558469
983795
498087
912767
773171
891923 -- 452805 (Correction Made)
905220 -- Blank Values for TDS, Surcharge & Ecess in new certificate
923216
833092
984623 -- J1INCERT:Consolidated Issues - SEP 2006
Eventhough I'm not getting the those values in the respective fields.
I mean, TDS Rate, ECESS Rate and CHENCK NUMBER.
More over, I want the FROM 16A should contain the Higher Education CESS field with values.
any notes has to be applied apart from this or what....
Wht are the table I have to maintain for this in SM30.
Kindly help me... It's urgent...
Regards,
Jacob Charles S. -
Issue while implementing OSS note
Hi Experts,
While Implementing the note 100690 in sap , I am facing the following issue.
The traffic signal light is red and the message text shows as follows:
Object REPS ZKOGLMNG doesn't exist, create it
Object REPS ZKOMENGE doesn't exist, create it
Object REPS ZKORWEM2 doesn't exist, create it
Object REPS ZKORWEM3 doesn't exist, create it
Object REPS ZKORWEM4 doesn't exist, create it
Could you guys help me out in resolving this issue ASAP .
Thanks in Advance
Regards
SandyHi Juan ,
Thanks for the mail,
I had a small doubt over here,
can I follow this procedure:
1). I will ask my ABAP team to create those mentioned objects manually.
2). Then I will implement the SNOTE , so that the corrections will be inserted into those objects.
I do understand your point earlier that to manually apply the corrections (In this case both step1 & 2 will be done by ABAPer's).
Please let me know if above procedure works .
Thanks&Regards
Sandeep -
LIS Extract structure MC17I00ACT changed while implementing oss note 865254
Hi,
While i am trying to implement the oss notes 865254 , the sap defined data source 2LIS_17_I0ACTY , having the extracture MC17I00ACT , extract structure is modified and many fields and includes are deleted .can any one please give soluation how to restore the original extract structure.its very urgent. please help me.
thanks,
sri.cHi,
it might be possible to get it back from the version management. I didn't do that, but you can try. Goto se11->Tools->Versions
regards
Siggi
PS: Be careful and check the versions before.
Message was edited by: Siegfried Szameitat -
A problem while implementing a file to file senario
hi all :
There is some problem while implement a file to file senario. the file couldn't be sent or recieved.
and as I try to check Check the Sender File Adapter Status via
Runtime Workbench -> Component Monitoring -> Communication Channel Monitoring ,
It is found that Adapter Engine has error status with red light. Is it why the file couldn't be sent?
Could you please tell me how to make Adapter Engine available?
Thank you very much!!!Hi Sony
Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for EC1.SystemHome.cnbjw3501 found
No access to get JPR configuration
Along with what experts suggested
What is the type of Business system is this. Standalone Java?
JPR can have problem if you have a business system thats not ABAP/Java type if this system is not having a SAP TS in landscape then create Java type.
Thanks
Gaurav -
How to implement OSS notes : 207260
Hi All,
Can anybody please let me know how to impement oss note : 207260.
I need to implement Note : 207260 which is settlement rule for incorrect last used period.In this note its saying to run ZMIGCOBR to repair incorrect settlement rule for incorrect objects. But in this notes its not given any such program.
Please let me know how to implement OSS notes since i never done this before.
Thanks in advance.
Regards,
VishalCheck the below point:
SAP R/3 Document : Using Transaction SNOTE
Implementing OSS Notes Using the new Transaction Code SNOTE
In this document we will see how to implement an OSS note using the SNOTE
transaction code.
The transaction code SNOTE is used to implement OSS Notes. With the SNOTE
transaction, it is no longer necessary to register ABAP objects such as report function
modules etc. manually. But data dictionary objects such as screens, tables need to
be modified manually by registering them in OSS system.
In order to use the transaction code SNOTE, the relevant transport which implement
this transaction in the system need to be transported. Please refer to the SNOTE
guide available at http://service.sap.com
Execute the Transaction code SNOTE
One of the first steps to do is to upload the note into your system.
Follow Goto à SAP Note Download
You can also use the SAP Note upload if the note has been saved in your local
machine
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
In the following box that you get, enter the note number. We will take Note 388732
as an example
and click on the Execute icon. You will get the note number displayed in the list of the
OSS notes
In the above screen, we have two notes listed.
By double clicking on or on the note number you can display the OSS note.
You can also check the Status of the note by clicking on the Check SAP Note icon
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
Select the note and click on Check SAP Note icon. In this case we have selected
note number 388732.
If the note is not implemented as part of some support pack as per the support pack
level of your system, you should get the following pop up box.
Select the note number that you want to implement and goto Edit à Select/deselect
node
To implement the OSS note click on the Implement OSS Note icon
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
You will get a confirmation box like the following
Click on Yes
Click on the Continue icon
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
You will be prompted to enter a change request number.
Click on the Create Request icon
Enter a brief description of for the note and click on the continue icon
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
A change Request number is created for the change that you are making
Click on the continue icon
The system will display the objects that are going to be modified during the process
of note application.
In our case, Report LTXW0F10 and RTXWCHK1 are going to be modified.
Click on the Continue icon
For while the system will show the note in IN PROCESS status
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
After a while, select the note and click on the Check SAP Note icon on the application
toolbar
But still the Status of the note is displayed under In Process category.
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
You can also check the status of the note by checking the meaning of the icon next
to the note number.
To check the legend, follow Utilities à Color Legend
As you can see from the legends box, means Implemented Correctly.
Since the note is implemented, you can change the status of the note from In
Process to Completed manually.
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
Select the note and click on the Set Processing Status icon
In the Pop up box that you get, select the Completed radio button
And click on the Continue icon
SAP R/3 Document : Using Transaction SNOTE
http://www.sappoint.com
The note number is removed from the list
ü You can also check the logs of the activities performed during the OSS note
implementation by clicking on the Logs icon on the application toolbar. The log
information will contain all the steps that were performed from the point of
downloading the note will its implementation is completed.
ü If there are any pre-requisite notes for the note that is being applied, the
system will prompt you to load those notes too into the system. Depending on
their applicability to your system, the system will prompt you accordingly to
apply the pre-requisite notes.
ü You can register the manually implemented SAP notes by executing the report
SCWN_REGISTER_NOTES.
ü SNOTE cannot change or modify data dictionary objects. If there is a note
which requires changes to be made to a structure or a screen then SNOTE will
not help. Such objects have to be registered and modified manually.
http://www.sappoint.com/basis/snote.pdf
Regards,
Prakash. -
AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE
Hi Experts...
Requirement: AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE HISTORY?
I have seen many threads about implementing OSS NOTES 390635, but hardly any one narrated the process in detail as to how to see 'Change History'..
I just would like to know 'how' and 'from where' to find Order Change History in detail (i.e Prod .order Comp. change history, Prod. Ord. Operation Change History, Prod. order header change history etc..)
In general this isssue might sound old one..but 'POST IMPLEMENTING OSS NOTE 390635' is rare one.
Folks need your expert comments and valuable suggestions....
Thank You...
LuckyDear
You should goto CO02-Enter Production Order -Goto -Change Management -Here it will list down all the chages with relevent information .
Refer : Re: Production order changes history
Production orders
Regards
JH -
Badi implementation error after implementing oss note 745168
Hi All,
i implemented oss note 745168 to fix badi ME_PROCESS_REQ_CUST by doing step 1 & 2 manually..
during the implementation of step 3, there was error but we just proceeded..now my whole badi consists error and can't be activated but the definition works just fine..
can anybody pls helpHello Babita,
For which version are u applying this note?? Is it for 4.7??
I checked the note and for r/3 release 4.7 there are two correction instructions.
Implement them in the following order
1. Correction instruction 434275
2. Correction instruction 434276
Please make sure you have implemented both corrections.
In code comparison editor you can check the code difference by clicking the "next code difference" tab in toolbar. It will tell you which code changes are missing.(You can see the required code changes just by clicking the correction instructions 434275 and 434276).
Hope this will helpful.
Regards,
Bhavana -
How many ways r there to implement Oss note
how many ways r there to implement Oss note and please explain all...
I count three.
SNOTE is the first, which applies the note without needing to manually apply the code.
Some notes can't be applied in SNOTE (the changes needed cannot be applied automatically by the system), so these are applied manually, following the instructoins in the note.
A third way is to apply a support pack, which is essentially made up of a large number of notes.
Regards,
Nick -
Problem while implementing note 1034868 for MAM 3.0
Hi,
I have another problem implementing this note. As described in that note at point no. 3. I'm not able to activate text elements for "RALM_ME_EQUI_FULL_DOWNLOAD_SD".
I receive an error "Error during activation" --> Message no. EU837
I've looked for it but found nothing. Any idea?
Thank you!
Regards,
FlorianHi Martin,
as we work with the standard SAP function module, we have restored first the last active version for the texts because there was a inconsistence, which we have found under the debugging and next the texts were activated successfully without this inconsistency.
I hope this helps a bit.
Regards,
Florian -
Problem related to OSS Note - importing file problem
Hi,
I m facing an issue while implenting an oss note 430580 , i have to import files from sapserver.
but i don't know how to do it.
below is the description of my problem.
Import the following files from SAPSERV:
/general/R3server/abap/note.0430580/K000687.PLM
/general/R3server/abap/note.0430580/R000687.PLM
Import the two files into your system.
For more information on SAPSERV, see Note 13719.
Can any one tell me how can i get rid out of this prioblem.
whether this is possible or BASIS Team can only do this.
system details
Operating system SunOS
Machine type sun4u
R/3 release 4.6CWell, these files are part of the zip.file which belong to the note. This is part of a regular transport and is normally done be basis. The data and the cofile (K....PLM & R...PLM) should be imported into your system. Before doing so they have to be transferred to the file server. Better let BASIS do these kind of things.
-
Modification problems while applying SAP Note manually
Hi Guys,
I am facing some problems while applying a SAP note manually (it cannot be applied without manual changes).
There is one standard program which I am trying to change for this purpose, but it does not allow me to do so saying "Carry out modification comparison for REPS RPCT8AR1_01 first. No changes possible" !!
Now I can go to SPAU and reset the object, but it will lose all its changes which was done
by 2 SAP notes previously.
How can I apply my SAP Note without reverting the changes ? If I revert the changes, I lose
the changes for other 2 notes !!
Is there a solution for this? please help asap.
Many thanks in advance,
Sandip.If you did not modified the program manually, you dont have to worry. implement your note from SNOTE transaction.
even if you loose previous modifications, you can always get them back by going SPAU transaction and import the transport numbers.
I had the same problem but we had manual changes to the program that is why didnt allow to implement note -
How to find out the list of implemented OSS Notes in a particular period.
Hi Friends,
Need help.
I need to find out the list of OSS Notes implemented in a period in a particular system.
Could you please suggest the table or program or any way to find out the OSS Notes Implemented date wise?
Thanks in Advance.
SreenivasHi Sreenivas.
How did you find the solution to this? Trying to do the same thing!
Cheers,
Tom -
Implementing OSS Note with /SAP/ and /DEVPROG/ - Note 1117955
I am trying to post OSS Note 1117955 which contains a Z* module from SAP as well as multiple changes to SAP modules. This is asking me for a transport for the Z module using /DEVPROG/, but then the SAP module changes are asking for a /SAP/ transport. The Note seems locked on the 1st transport and will not allow me to create a 2nd transport for the SAP program pieces. Anyone run into this before?
Usually when you do a modification to standard code (which a note application basically is) it puts it under a task of type 'Repair'.
Whereas when you change Z-objects they will be put under a task of type 'Development/Correction'
Try the following:
Create a transport that you will use for the note application which contains two tasks: one for repair and one for development/corrections and try to apply the note again by linking it to your new transport.
- SE10
- Create
- Select Workbench
- Confirm
- put in a description
- confirm
- put the cursor on the request
- click on the add user button
- choose your own user name
- confirm (this will add a second task to your transport request)
- click on the first task
- menu request/task - change type
- Choose Repair
- Do the same for the second task and choose development
Hope that helps,
Michael
Maybe you are looking for
-
Insert Statement is not working
Hi all I am using MySql. I want to insert a string into DB which also has singlequotes and double quotes. I am able to insert single quotes but when i am inserting double quotes i'm getting sql exception. any example code is much appreciated. can any
-
BADI MB_MIGO_BADI
Hello Guru, i'm using BADI MB_MIGO_BADI Method LINE_MODIFY to update a std field (CS_GOITEM-ANZGEB) with my value calculated. The problem is this method is always active during creation, modification and display in MIGO, therefore i have some problem
-
Hi , I just go to a I phone 4s back from repair a new replacement phone. I can't activate my wifi , the wifi button is greyed,so the wifi is unavailable , and I can't update to the new iOS 6.1.3,so what should I do? Pls help me.
-
In part (a) of my question I did not change anything at all, but suddenly lost the ability to have tabbed pdf files and could not get it back. So today I saw that the reader plugin was out of date. Adobe reader XI (updated today from X) works by itse
-
Why can't I insert a table in the header?
This is possible in Word... why not in Pages?