Problem while importing Chinese traditional - ZF language in ECC system

eHello All,
I am in process of importing Chinese traditional language - ZF to one of our ECC system. For installing I am following below steps:
1. Executed SMLT
2. Classify --> Saved ZF - Chinese traditional language
3. Imported support package.
4. Then Select language u201CChinese trad.u201D And Goto Language --> Special Actions --> Import Support Packages
while i am doing 4th step and importing support packages, For some of the old support packages the status is "Not found" as they are not there at OS level. (Ex: The status "Not found" is there for SP SAPKH60001 - SP 01 for SAP_APPL 6.00. While our system is at SAP_APPL version 604).
While i am deselecting this component it's giving me following message:
You can only exclude files from the import at the end of the list.
The Support Package import is incomplete. Continue the import with the missing
files.
Can anyone please do let me know what has to be done to resolve this???
Reagrds,
Nirav

Check
Note 1068483 - Language import and EhPs (Enhancement Packages)
And also
Note 1479911 - OCS import imports too many Support Packages
Markus

Similar Messages

Problem while importing a Crystal Report in SAP Business One

Hi Experts,
I am facing a problem while importing a Crystal Report in SAP Business One, it displaying an error "No matching records found 'Queries' (OUQR) (ODBC -2028) [Message 131-183]" , and there is no use of this table OUQR in the Query.
Kindly let me know the solution.
Regards
Rahul Singh

Hi Rhaul,
i don't exactly know why this is a problem, but if your not on latest (881 p10) then upgrade and try again.
Or as a workaround,
try saveing from CR to SAP with the CR add-on. That usualy works better then the import.
Regards,
D

Problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007

Gentlemen,
I have a problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007,
My current Support Package Level is:
SAP_ABA      700     0015
SAP_BASIS     700     0015
PI_BASIS      2006_1_700     0006
ST-PI     2005_1_700     0006
CRMUIF         600     0003
SAP_BW      700     0017
SAP_AP                700     0012
BBPCRM                600     0002
First I had the following error:
   Syslog: k CQ3 : UMGSETTING&                                          rscpexcc 12
   GetDBMigrateCodePagesLangs uses TCP0D, TCPDB, TCP0C.
     0 entries from FUNCT (%/SAPCND/CNF_GET_RECORD_FROM_DB%) deleted.
     0 d /   0 i /   0 u /   6 = 100% ucf FUPARAREF
     6 entries for FUPARAREF imported (/SAPCND/CNF_GET_RECORD_FROM_DBA*).
     0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
     0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
     0 d /   0 i /   0 u /   1 = 100% ucf TFTIT
     1 entry for TFTIT imported (D/SAPCND/CNF_GET_RECORD_FROM_DB*).
   successfully set a temporary lock on table REPOSRC
   REPOS /SAPCND/LDETERMINATION$14                A replaced.
   REPOS /SAPCND/LDETERMINATIONU14                A replaced.
    [dev trc     ,00000] Wed Nov 26 16:33:14 2008                         1315447 8.171484
    [dbdsoci.    ,00000] *** ERROR => invalid offset 0 for placeholder 16
                                                                                71 8.171555
   unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,
   dsql_open returned with unexpected error code 2
   Please contact the SAP support.
   End of Transport (0016).
   date&time: 26.11.2008 - 16:33:14
   5 warnings occured.
   3 errors occured.
   Main import
   End date and time : 20081126163314
   Ended with return code: ===> 16 <===
After I got this error I upgraded the Kernel from patch level 159 to 179,
After that I restarted the update again but the system is still running on u201CIMPORT_PROPERu201D and dose not given any update,
From Import logs of the queue I can see the following,
   Summary:
    24 DOCUT imported.
    16 DYNPS imported.
    30 DYNPT imported.
   387 REPOS imported.
    43 REPOT imported.
   Totally 505 Objects imported.
   Totally 3636 tabentries deleted.
   Totally 14 objects activated.
   Totally 12229 tabentries imported.
   62066888 bytes modified in database.
    [dev trc     ,00000] Wed Nov 26 18:14:19 2008                         20996974 40.917838
    [dev trc     ,00000] Disconnecting from ALL connections:                   30 40.917868
    [dev trc     ,00000] Disconnecting from connection 0 ...                  287 40.918155
    [dev trc     ,00000] Closing user session (con_hdl=0,svchp=00000000003005B8,usrhp=00000000002FB748)
                                                                              5759 40.923914
    [dev trc     ,00000] Detaching from DB Server (con_hdl=0,svchp=00000000003005B8,srvhp=00000000061530E8)
                                                                                921 40.924835
    [dev trc     ,00000] Now I'm disconnected from ORACLE                    8230 40.933065
    [dev trc     ,00000] Disconnected from connection 0                        90 40.933155
    [dev trc     ,00000] statistics db_con_commit (com_total=527, com_tx=307)
                                                                                59 40.933214
    [dev trc     ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0)
                                                                                52 40.933266
   Disconnected from database.
   End of Transport (0004).
   date&time: 26.11.2008 - 18:14:19
   2 warnings occured.
   Main import
   End date and time : 20081126181419
   Ended with return code: ===> 4 <===
Please advice me.
Regards,
Ahmed

I have similar problem while updating support packages in SAP R/3 4.6C environment.
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
Here is an outline of series of events that happened:-
We are applying in support packages in SAP R/3 4.6C HR Development
(TFI) environment. We planned with installing all the SP stacks
starting from 1 to 9.
-Updated kernel, tp , r3trans and SPAM level to latest level.
We received the following error in Import_Proper step of Support
package upgrade. Though the step has been repeated after making sure
that we have all the required files at OS level, we go this error
repeatedly.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Main import
End date and time : 20081205192603
Ended with return code: ===> 16 <===
When we renamed Co-File & data_file at OS level to see if the files are
created again and reran we got the following error.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.24 46D
Main import
End date and time : 20081205185117
Ended with return code: ===> 12 <===
We tried importing the individual support package SAPKB46C52 from STMS
and the transport cancelled at an earlier step with the same error.
Dictionary import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Dictionary import
End date and time : 20081205195929
Ended with return code: ===> 16 <===
While playing around I have deleted the transport from the tp buffer
and added manually, before doing so I made a backup of tp buffer at OS
level and I got following error though I reverted back to backed-up
copy.
- Error in phase: IMPORT_PROPER
- Reason for error: TP_BUFFER_INCONSISTENCY
- Return code: 0008
- Error message: Wrong sequence of Packages in the tp buffer (e.g.
SAPKB46C52 )
I then tried to disassemble the package separately and reran the
import queue. Now I have RC 8 on that support package.
When I did R3trans -l on the datafile it completed successfully.
D:\>R3trans -l \usr\sap\trans\data\RB46C52.SAP
This is R3trans version 6.05 (release 46D - 27.10.08 - 16:32:00).
R3trans finished (0000).
I verified the size of file "CSR0120031469_0023301.PAT" and it is the
same as mentioned in SSP.
Let us know is there is a workaround.

Problem while import

hi experts,
i am facing the problem while importing DC. here is the msg i am getting .
Problems were encountered during import:
Failed to read the project description file (.project) for LocalDevelopmentpapermtcs.com. The file has been changed on disk, and it now contains invalid information. The project will not function properly until the description file is restored to a valid state.
can anybody help me on this issue.
thank you ,
vijai

hi Sumit ,
how do i resync the dc.
can u help me step by step.
vijai

Problem while importing data schema not found

Hi,
I'm facing problem while importing data through system to a schema and impdp gives me error that schema XYZ was not found but when I query dba_users schema exist there what could be the reason of this.
Regards,
Abbasi

Hi,
Here is complete listing
bash-3.2$ impdp system/abc schemas=XYZ DIRECTORY=data_dir DUMPFILE=Today_dump.dmp LOGFILE=Today_log.log PARALLEL=8
Import: Release 11.1.0.7.0 - 64bit Production on Friday, 07 January, 2011 11:18:57
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39002: invalid operation
ORA-39165: Schema XYZ was not found.
Regards,
Abbasi

Problem while importing NWDI components in CRM5.0.

Hi All,
I'm facing problem while importing NWDI components in CRM5.0. Imports are running for long time and failing.
Could anyone please help me out.
Thanks in advance.
Regards,
Deepthi.

Thanks for your replies.
Can any one guide me Is there any need to deploy once again into production after or before importing into production through NWDI?
From development i released activities and able to see them in NWDI(CMS). I was able to successfully import in consolidation and even approved it without any errors. But when I tried to import in production tab , I am facing above problem.
Can any one explain me do I need to deploy directly into production (through NWDS) in WebDynpro perspective before importing into production from NWDI?
As far as my understanding if I import successfully into production I may need not to deploy it again.

Problem while downloading Chinese chatracters into an excel file

Hi All ,
While downloading Chinese characters into an excel file , using GUI_DOWNLOAD function module , im getting JUNK Characters instead of chinese characters.
But if im downloading the same chinese data into an text file or unix file , there is no such problem.
Thanks in advance and points will be rewarded for helpful answer.
Regards,
K.S.R

Hi, I have the same problem. Anyone has solution now?
Wu Hao
2008/08/21

Problem while Importing Transport Request

Hi Friends
We are trying to import a transport request, while importing abap dictionary objects, in the log it is showing not imported. we have tried the same request in other system, but it works fine there. Can you please anyone explain what may be the cause behind for this.
Regards
Praveen

Hi
Please find the log.
EXCLUDING        : 'R3TRVIEW','R3TRUENO','R3TRTTYP','R3TRTABL','R3TRSQLT','R3TRSHLP','R3TRMCOB','R3TRMCID','R3TRMACO','R3TRENQU','R
Data file is compressed with algorithm 'L'.
Export was executed on 25.07.2008 at 15:27:15 by unknown
620
with R3trans version: 26.02.07 - 15:37:00
Source System = PC with Windows NT on DBMS = MSSQL --- SERVER = 'ADAPSAPDEV' DBNAME = 'BI1' --- SYSTEM = 'BI1'.
language vector during export: ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789abcdefghijklmnopqrstuvwxyz(),./:;
lsm during export: VECTOR
trfunction = K (transport to consolidation system)
Used Commandfile BI1K900524           (DEVELOPER1/125)
Target client in E070C updated (100)
0 entries for E070 imported (BI1K900524).
0 entries for E071 imported (BI1K900524          *).
     table TADIR: entry in DB is 2 bytes bigger than in file.
     ... ignoring such differences.
26 26
     table DD01L: entry in DB is 32 bytes bigger than in file.
     ... ignoring such differences.
     table DD07L: entry in DB is 1 byte bigger than in file.
     ... ignoring such differences.
LIMUDOMDZZSMBI_TESTSTATUS was not imported in this step
     table DD04L: entry in DB is 2 bytes bigger than in file.
     ... ignoring such differences.
LIMUDTEDZZMSBI_ABAPVERSION was not imported in this step
LIMUDTEDZZMSBI_BUGID was not imported in this step
LIMUDTEDZZMSBI_CODELINE was not imported in this step
LIMUDTEDZZMSBI_CONVEXIT was not imported in this step
LIMUDTEDZZMSBI_COUNT was not imported in this step
LIMUDTEDZZMSBI_DATAROW was not imported in this step
LIMUDTEDZZMSBI_DATATYPE was not imported in this step
LIMUDTEDZZMSBI_DATEFORMAT was not imported in this step
LIMUDTEDZZMSBI_DECIMALPOINT was not imported in this step
LIMUDTEDZZMSBI_DELIMITER was not imported in this step
LIMUDTEDZZMSBI_DESCRIPTION was not imported in this step
LIMUDTEDZZMSBI_FILENAME was not imported in this step
LIMUDTEDZZMSBI_FLAG was not imported in this step
LIMUDTEDZZMSBI_FUNCNAME was not imported in this step
LIMUDTEDZZMSBI_INDEX was not imported in this step
LIMUDTEDZZMSBI_INTTYPE was not imported in this step
LIMUDTEDZZMSBI_LANG was not imported in this step
LIMUDTEDZZMSBI_LANGUAGE was not imported in this step
LIMUDTEDZZMSBI_MODE was not imported in this step
LIMUDTEDZZMSBI_MSGCLASS was not imported in this step
LIMUDTEDZZMSBI_MSGDATE was not imported in this step
LIMUDTEDZZMSBI_MSGID was not imported in this step
LIMUDTEDZZMSBI_MSGTEXT was not imported in this step
LIMUDTEDZZMSBI_MSGTIME was not imported in this step
LIMUDTEDZZMSBI_MSGVAR was not imported in this step
LIMUDTEDZZMSBI_NEG_ON_RIGHT was not imported in this step
LIMUDTEDZZMSBI_OBJNAME was not imported in this step
LIMUDTEDZZMSBI_OPTION was not imported in this step
LIMUDTEDZZMSBI_OUTPUTLEN was not imported in this step
LIMUDTEDZZMSBI_SEVERITY was not imported in this step
LIMUDTEDZZMSBI_SHORTCOUNT was not imported in this step
LIMUDTEDZZMSBI_SIGN was not imported in this step
LIMUDTEDZZMSBI_TABLECLASS was not imported in this step
LIMUDTEDZZMSBI_TAGNAME was not imported in this step
LIMUDTEDZZMSBI_TAGTYPE was not imported in this step
LIMUDTEDZZMSBI_TESTID was not imported in this step
LIMUDTEDZZMSBI_TESTOBJNAME was not imported in this step
LIMUDTEDZZMSBI_TESTSTATUS was not imported in this step
LIMUDTEDZZMSBI_VAR was not imported in this step
LIMUDTEDZZMSBI_VIEWCLASS was not imported in this step
LIMUDTEDZZMSBI_WHERESTRING was not imported in this step
LIMUDTEDZZMSBI_WHERE_LINE_46C was not imported in this step
LIMUDTEDZZMSBI_WHERE_OPERATOR was not imported in this step
LIMUDTEDZZMSBI_WHERE_VALUE was not imported in this step
Start import LIMUREPSZZMSBI_EXTRACTCODE_TEMPLATE ...
1 entry for TADIR updated (R3TRPROGZZMSBI_EXTRACTCODE_TEMPLATE             ).
0 entries from SMODILOG (PROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
0 entries from SMODISRC (CVPROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
0 entries from SMODISRC (CUPROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
0 entries from SMODISRC (PRPROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
0 entries from SMODISRC (SVPROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
0 entries from SMODISRC (CIPROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
REPOS ZZMSBI_EXTRACTCODE_TEMPLATE              A replaced.
report ZZMSBI_EXTRACTCODE_TEMPLATE              (L) synchronized.
169736 169762
1 entry for TRDIRT updated (ZZMSBI_EXTRACTCODE_TEMPLATE             *).
End of import LIMUREPSZZMSBI_EXTRACTCODE_TEMPLATE
     table DD03L: entry in DB is 4 bytes bigger than in file.
     ... ignoring such differences.
LIMUTABDZZMSBI_ABAPCODE was not imported in this step
LIMUTABDZZMSBI_CONVERSION_FIELDS was not imported in this step
LIMUTABDZZMSBI_CONVERSION_METADATA was not imported in this step
LIMUTABDZZMSBI_DATAOBJECT was not imported in this step
LIMUTABDZZMSBI_DATATABLE was not imported in this step
LIMUTABDZZMSBI_DD02V was not imported in this step
LIMUTABDZZMSBI_DD03P was not imported in this step
LIMUTABDZZMSBI_DD05M was not imported in this step
LIMUTABDZZMSBI_DD08V was not imported in this step
LIMUTABDZZMSBI_DD09L was not imported in this step
LIMUTABDZZMSBI_DD12V was not imported in this step
LIMUTABDZZMSBI_DD17V was not imported in this step
LIMUTABDZZMSBI_DD26V was not imported in this step
LIMUTABDZZMSBI_DD27P was not imported in this step
LIMUTABDZZMSBI_DD28J was not imported in this step
LIMUTABDZZMSBI_DD28V was not imported in this step
LIMUTABDZZMSBI_FIELDS was not imported in this step
LIMUTABDZZMSBI_JOINCONDITION was not imported in this step
LIMUTABDZZMSBI_KEYFIELDS was not imported in this step
LIMUTABDZZMSBI_LOGMESSAGE was not imported in this step
LIMUTABDZZMSBI_RANGE_CONVEXIT was not imported in this step
LIMUTABDZZMSBI_RFCRETURNMSG was not imported in this step
LIMUTABDZZMSBI_TAG_DIRECTORY was not imported in this step
LIMUTABDZZMSBI_UNITTESTRESULT was not imported in this step
LIMUTABDZZMSBI_WHERE was not imported in this step
LIMUTABDZZMSBI_WHERE_CLAUSE_46C was not imported in this step
LIMUTTYDZZMSBI_T_ABAPCODE was not imported in this step
LIMUTTYDZZMSBI_T_CONVERSION_FIELDS was not imported in this step
LIMUTTYDZZMSBI_T_CONVERSION_METADATA was not imported in this step
LIMUTTYDZZMSBI_T_DATAOBJECTS was not imported in this step
LIMUTTYDZZMSBI_T_DATATABLE was not imported in this step
LIMUTTYDZZMSBI_T_DD02V was not imported in this step
LIMUTTYDZZMSBI_T_DD03P was not imported in this step
LIMUTTYDZZMSBI_T_DD05M was not imported in this step
LIMUTTYDZZMSBI_T_DD08V was not imported in this step
LIMUTTYDZZMSBI_T_DD09L was not imported in this step
LIMUTTYDZZMSBI_T_DD12V was not imported in this step
LIMUTTYDZZMSBI_T_DD17V was not imported in this step
LIMUTTYDZZMSBI_T_DD26V was not imported in this step
LIMUTTYDZZMSBI_T_DD27P was not imported in this step
LIMUTTYDZZMSBI_T_DD28J was not imported in this step
LIMUTTYDZZMSBI_T_DD28V was not imported in this step
LIMUTTYDZZMSBI_T_FIELDS was not imported in this step
LIMUTTYDZZMSBI_T_JOINCONDITION was not imported in this step
LIMUTTYDZZMSBI_T_KEYFIELDS was not imported in this step
LIMUTTYDZZMSBI_T_MESSAGE was not imported in this step
LIMUTTYDZZMSBI_T_OBJECTMETADATA was not imported in this step
LIMUTTYDZZMSBI_T_RANGE_CONVEXIT was not imported in this step
LIMUTTYDZZMSBI_T_RFCRETURNMSG was not imported in this step
LIMUTTYDZZMSBI_T_TAGTYPE_LIST was not imported in this step
LIMUTTYDZZMSBI_T_TAG_DIRECTORY was not imported in this step
LIMUTTYDZZMSBI_T_UNITTESTRESULT was not imported in this step
LIMUTTYDZZMSBI_T_WHERE was not imported in this step
LIMUTTYDZZMSBI_T_WHERE_CLAUSE_46C was not imported in this step *
Can you please reply me asap.
Thanks and Regards
Praveen

Problem while importing from Panasonic SDR-S10

After finding the panasonic SDR-S10 on the iMovie 08 compatibility list, I updated and bought the camera for quick video shots. While traveling, I filled three 2 GB cards with no techical problems. Importing them into iMovie though causes problems. About half of the clips are imported with sound, the rest without! I tried importing with the camcorder, a SD-card reader, onto my internal HD and HD2. Sound and picture is perfect on the camera. I use Quicktime pro but do not have the mpeg2 plugin. The camera compresse in mpeg2. Can anybody help?

I have the same camcorder and have used Visual Hub to convert the .mod clips to .dv files which work just fine with iMovie. You can try out Visual Hub for clips less than 2 minutes in length in the trial mode. I think it costs about $20. Also, I've heard you can buy an mpeg2 plug in for Quicktime Pro that will let you use those files. I think that is also about $20.
Also, search the apple discussions for ".mod" and you'll find a lot of other similar questions to the one you asked.
Hope this helps.

Problem while importing the wsdl into Dynpro ?

HI Guys,
I have developed a webservice within xi in the integration directory and while importing this wsdl into webdynpro i am getting the following error
!ENTRY com.sap.ide.ws.proxygenerator 4 -1 Okt 10, 2007 19:02:23.788
!MESSAGE com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. Problem with WSDL file parsing. See nested message.
!STACK 0
com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. Problem with WSDL file parsing. See nested message.
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.getDefaultSchemaMapping(ProxyGenerator.java:110)
at com.sap.ide.ws.proxygenerator.ProxyHelperFunctions.createNamespacePackageMappingFile(ProxyHelperFunctions.java:103)
at com.sap.ide.ws.proxygenerator.ProxyHelperFunctions.createNamespacePackageMappingFile(ProxyHelperFunctions.java:86)
at com.sap.ide.ws.proxygenerator.ProxyHelperFunctions.createNamespacePackageMappingFile(ProxyHelperFunctions.java:82)
at com.sap.ide.wsproxy.wizards.prx.pages.NamespacePackageMappingPage$1.run(NamespacePackageMappingPage.java:114)
at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:302)
at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:252)
at org.eclipse.jface.dialogs.ProgressMonitorDialog.run(ProgressMonitorDialog.java:357)
at com.sap.ide.wsproxy.wizards.prx.pages.NamespacePackageMappingPage.initTable(NamespacePackageMappingPage.java:170)
at com.sap.ide.wsproxy.wizards.prx.pages.NamespacePackageMappingPage.setVisible(NamespacePackageMappingPage.java:295)
at org.eclipse.jface.wizard.WizardDialog.updateForPage(WizardDialog.java:959)
at org.eclipse.jface.wizard.WizardDialog.access$1(WizardDialog.java:940)
at org.eclipse.jface.wizard.WizardDialog$3.run(WizardDialog.java:929)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at org.eclipse.jface.wizard.WizardDialog.showPage(WizardDialog.java:927)
at org.eclipse.jface.wizard.WizardDialog.nextPressed(WizardDialog.java:684)
at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog.nextPressed(ModelDialog.java:218)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:316)
at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
at org.eclipse.jface.window.Window.open(Window.java:563)
at com.sap.ide.webdynpro.modeleditor.ModelEditorCallback.createModel(ModelEditorCallback.java:52)
at com.sap.ide.webdynpro.service.modeleditor.ModelService.createModelWithUI(ModelService.java:70)
at com.sap.ide.webdynpro.service.modeleditor.ServiceWithUI.createModel(ServiceWithUI.java:49)
at com.sap.ide.webdynpro.tsmodel.application.provider.ModelNodeProvider.createUniqueName(ModelNodeProvider.java:55)
at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntityUin(EntityImpl.java:936)
at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntity(EntityImpl.java:502)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.runInternal(CreationAction.java:76)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.access$000(CreationAction.java:24)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction$1.run(CreationAction.java:51)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.run(CreationAction.java:57)
at com.sap.ide.webdynpro.projectbrowser.actions.PBCreateModelAction.run(PBCreateModelAction.java:95)
at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: com.sap.engine.lib.xml.util.NestedException: Parser exception occurred:Fatal Error: com.sap.engine.lib.xml.parser.ParserException: = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992) -> com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992)(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row=3, col=992) -> com.sap.engine.lib.xml.parser.ParserException: = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992)
at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadDOMDocument(WSDLDOMLoader.java:1032)
at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadWSDLDocument(WSDLDOMLoader.java:1125)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.getDefaultSchemaMapping(ProxyGenerator.java:107)
... 63 more
Caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992)(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row=3, col=992) -> com.sap.engine.lib.xml.parser.ParserException: = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992)
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:139)
at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadDOMDocument(WSDLDOMLoader.java:1022)
... 65 more
Caused by: com.sap.engine.lib.xml.parser.ParserException: = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992)
at com.sap.engine.lib.xml.parser.XMLParser.scanAttList(XMLParser.java:1565)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1710)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1841)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1841)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1841)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1841)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1841)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2843)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:204)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:263)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342)
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
... 67 more
any help would be appreciated
Thanks,
srini

Hi,
If the import fails with the message that certain instances of the CIM class SAP_AssociatedContext were not imported, repeat the import. These errors are caused by an incorrect sort order in the export file. When starting the import again ignore the warning that data already exists. Choose Import anyway.
Also go through this Document.
http://help.sap.com/bp_bpmv130/Documentation/Operation/SystemContentCopy.pdf
Regards,
Akshay Jamgaonkar.
Reward points if find useful.

Problem While Importing Work Repository

I am facing a problem with import and export in ODI.
I was working in ODI Designer and had to move my work repository from one host machine to another host machine.
After doing a database migration of the ODI database to the new machine, the master repository was imported.
There was no problem in importing the master repository.
While taking an export of the old work repository, I took an export into a zip file:
File---->Export----->Work Repository
And specified the zip file name there
Now the problem is, that when I import the work repository into the new environment/host/machine, it throws an error.........
java.sql.SQLException: ORA-02291: integrity constraint (SCHEMA_NAME.FK_COL_COL) violated - parent key not found
where SCHEMA_NAME is the Oracle schema being used as a work schema
Message was edited by:
CJ@DI

Yes I believe that's the problem
Thanks a lot for ur suggestion, I'm going to try that
Because my schema had been created a month ago and there was some metadat already stored in it at that time
But now I wanted to REPLACE all that through ODI
But that seems an impossible task
So will try to drop and re-create the schema and then import.
I had some invalid interfaces in my export as well.......so that could have caused it
Well, in ideal terms ODI should throw an error when you try to export and if anything is invalid in your Designer
I guess the tool still needs to evolve
That's my perception but maybe I'm not following some procedures to do things in ODI ; long way to learn!
Message was edited by:
CJ@DI

Problem While Importing.....Urgent....

Hi All,
I have one export file which is from Production Database and now I am importing the same for testing environment. I am getting error while Importing.
During the Import process it's trying to import in a Production tablespace which doesn't exists in testing environment.
What should I to overcome this problem.
Thanks in Advance
Vinod

I have one export file which is from Production Database and now I am importing the same for testing environmentI think you are importing in testing database, which is on same server as production database.
How you have taken an export? Is it full or tablespace or only schema?
Can you post command you are typing & errors.

NullPointerException problem while importing MDL file......

Hi OWB Gurus,
I am getting java.lang.NullPointerException error while importing MDL file.Please let me know the solution if any one had experience the same problem in the past
Thank in advance
Best Regards
kumar

Where there any errors during the import? If so, what were the errors?

Problem during import of 121 transport requests to productive system

Hello
We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in TRJOB as well).
In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
In SM37 I can see it as job "RDDGEN0L" with repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
For fist two indexes I know they are not present as objects "LIMU""INDX" in any transport request beeing imported.
Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
Does anyone knows workaroun to solve production

are you importing these transport requests simultaneously into production?
I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
Rohit

Invoice PDF outputs Displaying # instead of Russian Language in ECC system

Hi Folks,
In our ECC System ( EHP6 SP08) , Invoice output is being displayed in as # characters instead of Russian Language. Could any of suggest how we can proceed further
Regards,
Sharma

Hi
Did you checked for imported languages? SMLT transaction?
Also, please check if you have fixed the language at ADS configurations (RFC, JCO, etc...)

Problem while importing Chinese traditional - ZF language in ECC system

Similar Messages

Maybe you are looking for