Problem while incrementing the index

Hi Friends,
I am working on creating Credit memos and return orders through BDC. For the item level, I am incrementing the index in order to enter the MATNR, POSNR, KWMENG etc. I have seven lines open in my screen. So when I have an order greater than or equal to seven lines, the program is showing an error that that line does not exist in the screen. Please, let me know what is the solution for this.
Thanks,
Raj

Srinivas,
I am giving a new line from the very first line. It is working fine till the seventh line. But after the seventh line, the cursor is coming to the MATNR position and the proghram errors there. I am also attaching my code. If you can correct me from that, it would be helpful.
idx = 01.
LOOP AT ITABI WHERE IHREZ = ITABH-IHREZ.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                   '=POAN'.
    CONCATENATE 'VBAP-ABGRU(' IDX ')' into FNAM.
    perform bdc_field using 'BDC_CURSOR'
                             FNAM.
    CONCATENATE 'RV45A-MABNR(' IDX ')' INTO FNAM.
    perform bdc_field       using fnam
                                    ITABI-MABNR.
    CONCATENATE 'VBAP-ZMENG(' IDX ')' INTO FNAM.
    perform bdc_field       using FNAM
                                     ITABI-ZMENG.
    CONCATENATE 'VBAP-POSNR(' IDX ')' INTO FNAM.
    perform bdc_field       using fnam
                                    ITABI-POSNR.
    concatenate 'VBAP-ABGRU(' IDX ')' INTO FNAM.
    perform bdc_field       using FNAM
                                   'Z2'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                   '=PKO1'.
   CONCATENATE 'VBAP-POSNR(' IDX ')' into FNAM.
   perform bdc_field using 'BDC_CURSOR'
                             FNAM.
    perform bdc_dynpro      using 'SAPMV45A' '5003'.
    perform bdc_field       using 'BDC_OKCODE'
                                     '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                   'KOMV-KSCHL(01)'.
   perform bdc_dynpro      using 'SAPMV45A' '5003'.
     perform bdc_field       using 'BDC_OKCODE'
                                     '=V69A_KOAN'.
     perform bdc_field       using 'BDC_CURSOR'
                                   'KOMV-KSCHL(01)'.
    perform bdc_dynpro      using 'SAPMV45A' '5003'.
    perform bdc_field       using 'BDC_OKCODE'
                                     '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                    'KOMV-KWERT(07)'.
    perform bdc_field       using 'KOMV-KSCHL(02)'
                                      'ZPR0'.
      perform bdc_field       using 'KOMV-KBETR(02)'
                                     ITABI-KBETR1.
      perform bdc_field       using 'KOMV-KSCHL(03)'
                                      'ZPRS'.
      perform bdc_field       using 'KOMV-KBETR(03)'
                                     ITABI-KBETR2.
      perform bdc_field       using 'KOMV-KSCHL(04)'
                                      'ZR1'.
      perform bdc_field       using 'KOMV-KWERT(04)'
                                     ITABI-KWERT1.
      perform bdc_field       using 'KOMV-KSCHL(05)'
                                      'ZLWR'.
      perform bdc_field       using 'KOMV-KWERT(05)'
                                     ITABI-KWERT2.
      perform bdc_field       using 'KOMV-KSCHL(06)'
                                      'ZLDL'.
      perform bdc_field       using 'KOMV-KWERT(06)'
                                     ITABI-KWERT3.
      perform bdc_field       using 'KOMV-KSCHL(07)'
                                      'ZLFB'.
      perform bdc_field       using 'KOMV-KWERT(07)'
                                     ITABI-KWERT4.
     perform bdc_field       using 'KOMV-KSCHL(08)'
                                     'ZLBD'.
     perform bdc_field       using 'KOMV-KWERT(08)'
                                    '0.00'.
     perform bdc_dynpro      using 'SAPMV45A' '5003'.
     perform bdc_field       using 'BDC_OKCODE'
                                     '=T\13'.
      perform bdc_dynpro      using 'SAPMV45A' '4003'.
      perform bdc_field       using 'BDC_OKCODE'
                                     '/EBACK'.
      perform bdc_field       using 'BDC_CURSOR'
                                     'VBAP-ZZRFAR'.
      perform bdc_field       using 'VBAP-ZZRWAR'
                                      ITABI-WCD.
      perform bdc_field       using 'VBAP-ZZRFAR'
                                     ITABI-FCD.
     idx = IDX + 1.
ENDLOOP.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                    '=SICH'.
Thanks,
Raj

Similar Messages

Problems while generating the proxy definition

Hi Experts,
I am facing the error " Problems while generating the Proxy Definition! ", when creating the proxy definition, for a specific URL.
The URL to call the webservice is similar to "http://www3.XYZ.com/_vti_bin/newswebservice.asmx?WSDL" and is returning the appropriate XML code. Moreover accessing the webservice through browser, returns the expected response, too.
From the NWDS side, where we are creating the proxy, again, everything is fine, because we have already created two proxy definitions, in similar fashion, but for different WSDL links.
The only difference we are encountering is like, earlier the links were of type "www.abc.com/..." while the new URL is of type "www3.xyz.com/..." type. I hope this load balancing technique has hardly to do anything with it.
Any pointers for possible reasons and solutions will be of much help.
Regards,
Akhil Mishra

If you are consuming a web service in NWDS look below document and check if you are not missing any step:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0cf9e42-ccb0-2c10-d0a4-f5aa8a79e19a

Problem while exporting the data from a report to an excel file.

Hi SAP guru's,
I have a problem while exporting the data from a report to an excel file.
The problem is that after exporting, the excel file seems to have some irrelevant characters....I am checking this using SOST transaction..
Required text (Russian):
Операции по счету
№ документа     Тип документа     № учетной записи     Дата документа     Валюта     Сумма, вкл. НДС     Срок оплаты     Описание документа
Current Text :
   ? 5 @ 0 F 8 8 ? > A G 5 B C
!   4 > : C       "" 8 ? 4 > : C      !   C G 5 B = > 9 7 0 ? 8 A 8        0 B 0 4 > : C         0 ; N B 0      ! C <       ! @ > : > ? ; 0 B K        ? 8 A 0 = 8 5 4 > : C
Can you help me making configuration settings if any?
Regards,
Avinash Raju

Hi Avinash
To download such characteres you need to adjust code page to be used during export. You can review SAP note 73606 to identify which code page is required for this language
Best regards

Problem while updating the Support Package 17 on my SAP WAS SP9

Hi,
I'm facing problem while updating the Support Package 17 on my SAP WAS SP9
ERROR 2006-10-13 10:23:22
FSL-06002 Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).
Please help me in this regard.....
Thanks in advance...
Satya

Hello gentlemen, I am also having problem with the following running on 64 bit Windows and SQL2005/64 bit. I am erroring in Step 8 'Updating JDBC' driver. I am attempting to update from SP9 to SP18. The WEBAS Jave installed went flawless but I seem to be stuck here. Any help is appreciated...
ERROR 2006-11-22 10:13:57
FSL-06002 Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).

Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************

Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support

"Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa K

Hi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin

Problem while dowloading the file from Application Server

Dear Experts,
I am facing the Problem while downloading the file from Application server.
We done the automatic function while saving the invoice, this will create an idoc, and this idoc is written in the Application Server.
I am running the Transaction AL11 and select the record, and from menu --> List, i am downloading into TXT format.
But for some segments, the length is long, and so the last 3 to 4 fields values are not appearing in the File. Even though i am unable to view the values in the file before downloading. But i can view in IDOC.
Please help me to solve this issue.
Thanks & Regards,
Srini

but our user will use the Txn. AL11 and they will download from there
Educate the user On a serious note, tell him this is not how data from app server should be downloaded. You can ask him to talk to the basis team to provide him access to the app server folder where the file is being stored.
I can set the Variant and put this in background, But always the file name will be change, Like we use Time stamp in the File name.
You can't automate this process by scheduling in BG mode. This is because the in BG mode you can't dwld the file to presentation server.
Hope i'm clear.
BR,
Suhas

Facing a Problem while downloading the data from ALV Grid to Excel Sheet

Hi Friends,
Iam facing a problem while downloading the data from ALV Grid to excel sheet. This is working fine in Development server , when comes to Quality and Production servers I have this trouble.
   I have nearly 11 fields in ALV Grid and out of which one is PO number of length 10 , all the ten numbers are visible in the excel sheet if we download it from development server but when we download it from Quality or Production it is showing only 9 numbers.
Can any one help me out in this case.

hi...
if this problems happens dont display the same internal as u finally got.
just create new internal table without calling any standard data elements and domains... but the new internal table s similar like ur final internal table and move all the values to new int table.
for eg.
ur final internal int table for disp,
     data : begin of itab occur 0,
                    matnr like mara-matnr,
               end of itab.
create new like this,
           data : begin of itab occur 0,
                    matnr(12) type N,
               end of itab.

Errors in the OLAP storage engine: An error occurred while processing the indexes for the partition of the measure group of the cube from the database.

Errors in the OLAP storage engine: An error occurred while processing the indexes for the partition of the measure group of the cube from the database.
I have dropped and recreated a fact table to refresh the data as the table is having identity columns. So not able to directly insert data. After that cube is throwing above error.
Please suggest.

Hi Md,
It hard to analyse the issue base on the limited information, Are there any error message on the log? Under C:\Program Files\Microsoft SQL Server\MSAS11.\OLAP\Log (this could be different for your server), there are 3 log files that are generated:
msmdrrv.log
FlightRecorderCurrent.trc
FightRecorderBack.trc
The msmdrrv.log simply points to the other two logs. There might be some detail information for this error. Please provide us the detail information about it, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

Problems while generating the report........

Hi Experts,
I have genereated a new report on purchasing data, I am facing bellow problems while generating the report,
1) In rows one Invoice doc num is there, I am not getting result row for this object, I have given NEVER in supress result rows in properties of that object, but it's not showing.....how can i get result row for this object?
2) I am getting '#' for the blank values, How to remove these '#"s
Please help to solve my above problems,
Helpful answer will be awarded with points,
Thanks in advance,
Venkat.

Hi,
1) If you have only Invoice Num it does not shows the result Row .
2)If you display the characteristics as Key u will get as '#'. You can select as Text,then it will show 'Not Assigned'. (Hope you know that when the Values not updated from Infoprovider then # appears at output )
Hope it helps

Experiencing the problems while encoding the barcode with Code 128 font

Hi Tim,
Hope you are doing good.
We are experiencing the problems while encoding the barcode with Code 128 font.we have followed the Oracle BI Publisher Blog i.e Barcoding 102 http://blogs.oracle.com/xmlpublisher/discuss/msgReader$281.
Before applying the encoding Java class we were able to display the barcode but after applying this encoding Java class we are not able to display the barcode.
We are requesting you to help us for encoding the barcode with Code 128 font and read barcode by scanner.
We will appreciate and thankful if anybody help us in this regard
Thanks,
SubbaRao.

Hi Tim,
I am trying to create 128 Barcode, output shows little junk characters. I followed the your "Barcoding 102 instrucitons but no luck. I apprciate your help if you provide some help on this.
http://blogs.oracle.com/xmlpublisher/2006/06/06
1. Created Java class under $JAVA_TOP/oracle/apps/oracle/xdo/template/util/barcoder
2. Registeted and applied the format the barcode to the form field. I will sedn my XML, RTF and Java class, Would you pleae advice me on this
Thanks
Venu

Problem while creating the Partner Address in CRM

Hi,
   We are facing one problem while creating the new address for the Business Partner.
   When ever customer wants to change the address : we are following one process : where we are
   using 'BAPI_BUPA_ADDRESS_ADD' functin module. Becuse of this , new addrss number will be generated for the
corresponding account in BUT021_FS table.But this table contains old address number as a first record, so that when ever
we display the partner address in UI, it is displaying the old address only because first entry of the the table 'BUT021_FS'
contains the old address number.
Because of this , we are getting lots of complaints regarding this.
Can you please help on this ASAP.
Thanks & Regards
Pradeep.

Try BAPI_BUPA_ADDRESS_CHANGE for address change followed by BAPI_TRANSACTION_COMMIT . It works.

Problem While Exporting the Output

Dear All ,
I am facing a problem while exporting the ALV output to Spreadsheet.
When I click on Menu LIST->Export-->Spreadsheet, One pop is coming with title "Save XXL list object in SAPOffice" In that it is asking me to save Name of the List object and a Title.
Please guide me what needs to be done for this.
Regards,
Nikhil

Hi, Nikhil
You can USE a Short Cut Key Ctrl + Shift + F9 and than select the type in you want to download in your case you will select Spreadsheet
Regards,
Faisal

Problem while priniting the Xcelsius

Hello Experts,
I have a problem while printing the xcelsius dashboard(.SWF file),
While printing some objects not prinitng. and in the grid, the alert colors are not showing,
I am using Xcelsius 2008 SP3.
Please help me in resolving the issue.
Thanks in advance,
Radhika

Hai
Solution is to uninstall flash player, install Latest one
When users open Microsoft PowerPoint files that contain SWFs and print the slides before running the
Slide show, the printed slides are blank.
To print SWFs in PowerPoint, start Slide Show mode and open each slide before printing the file.
https://cw.sdn.sap.com/cw/ideas/1641
http://www.tek-tips.com/viewthread.cfm?qid=1548648
http://www.hackingsap.com/blog/tag/xcelsius
http://www.sap-forum.org/f22/printing-xcelsius-t2789/

Windows Media Player encountered a problem while playing the file...

I am running WMP 11.0.5721.5280. I am running XP SP3 with every update that has come out. I have 4 GB RAM and my processor is a Pentium 4, 2.6GHz.
I have a large collection of music file ripped from my CD collection. Almost every time I want to plat a music file I get a message; Windows Media Player encountered a problem while playing the file, For additional assistance, click Web Help. When this
error box is displayed, a red 'X' placed next to the file in WMP.
When I click the "Web Help" button, I am taken to a MS website (http://windows.microsoft.com/en-us/windows7/c00d11b1) which tells me that I should go to the sound device website and make certain I have the latest driver. All of the advice which
is given does not apply to me. My sound device works fine! I can play CD, DVD (movies), and MP3 files. Even when I use RealPlayer, the same thing happens, but not as frequently.
Can anyone offer a solution to this problem?

They'll help you over here.
Windows
XP forums on Microsoft Answers
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Problem while incrementing the index

Similar Messages

Maybe you are looking for