Problem while installing ECC 5.0 on RHEL

Hi
I am new to this forum .The problem is @ the end of the database instance installation .
it says a library GLIBC 2.3.4 is needs to be installed . tried installing even that but hard luck ..
Regards
Vinay.K

Vinay,
usually in such cases it is good to post some additional information or try to post some info from the logfile or state your versions, etc. Working with just this info (for others) is like looking in to a crystal ball or just plainly guessing.
So, can we please have some more info, version numbers, log file outputs, etc?
Regards,
Bas

Similar Messages

Error while installing ECC 6.0 IDES

hi experts,
I am facing an problem while installing ECC 6.0 with the following error
database connection failed with step key
*nwabap_import_dialog*_
connection failed with status error
thank u all

welcome to SDN, could you please paste the detailed installation log? we cant help you until you provide detailed log.
cheers,
-Sunil

Problem while installing ECC6.0 IDES with EP

Hi,
I have successfully installed ECC6.0 IDES with ABAP+JAVA.
Now while installing the same with ABAP+JAVA and with EP &EPC , I am getting the following error while installing.can any one tell me how the problem can be resolved?
Jan 6, 2009 9:54:45 AM   Info: End of log messages of the target system.
Jan 6, 2009 9:54:45 AM   Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Jan 6, 2009 9:54:45 AM   ***Error: Aborted: development component 'irj'/'sap.com'/'SAP AG'/'7.0014.20071112134549.0000'/'1', grouped by software component 'EPBC'/'sap.com'/'SAP AG'/'1000.7.00.14.0.20071210152326''/'1':***
***Caught exception during application deployment from SAP J2EE Engine's deploy API:***
***com.sap.engine.deploy.manager.DeployManagerException: ERROR: NOT deployed. The Deploy Service returned the following error: java.lang.NullPointerException***
***Exception is:***
***java.lang.NullPointerException***        at com.sap.engine.deploy.manager.DeployManagerImpl.deployUpdateAction(DeployManagerImpl.java:666)
        at com.sap.engine.deploy.manager.DeployManagerImpl.deploy(DeployManagerImpl.java:513)
        at com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.performDeployment(EngineJ2EE620OnlineDeployerImpl.java:332)
        at com.sap.sdm.serverext.servertype.inqmy.extern.EngineDeployerImpl.deploy(EngineDeployerImpl.java:96)
        at com.sap.sdm.serverext.servertype.inqmy.EngineProcessor.executeAction(EngineProcessor.java:224)
        at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.execute(PhysicalDeploymentActionExecutor.java:60)
        at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.execute(DeploymentActionImpl.java:186)
        at com.sap.sdm.app.proc.deployment.controllers.internal.impl.DeploymentExecutorImpl.execute(DeploymentExecutorImpl.java:48)
        at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.executeAction(ExecuteDeploymentHandler.java:83)
        at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.handleEvent(ExecuteDeploymentHandler.java:60)
        at com.sap.sdm.app.proc.deployment.states.StateBeforeNextDeployment.processEvent(StateBeforeNextDeployment.java:127)
        at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
        at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
        at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.doPhysicalDeployment(DeployerImpl.java:128)
        at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.deploy(DeployerImpl.java:97)
        at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.deploy(DeployerImpl.java:68)
        at com.sap.sdm.control.command.cmds.Deploy.execute(Deploy.java:179)
        at com.sap.sdm.control.command.decorator.AssureStandaloneMode.execute(AssureStandaloneMode.java:53)
        at com.sap.sdm.control.command.decorator.AssureOneRunningSDMOnly.execute(AssureOneRunningSDMOnly.java:61)
        at com.sap.sdm.control.command.decorator.SDMInitializer.execute(SDMInitializer.java:52)
        at com.sap.sdm.control.command.decorator.GlobalParamEvaluator.execute(GlobalParamEvaluator.java:60)
        at com.sap.sdm.control.command.decorator.AbstractLibDirSetter.execute(AbstractLibDirSetter.java:46)
        at com.sap.sdm.control.command.decorator.ExitPostProcessor.execute(ExitPostProcessor.java:48)
        at com.sap.sdm.control.command.decorator.CommandNameLogger.execute(CommandNameLogger.java:49)
        at com.sap.sdm.control.command.decorator.AdditionalLogFileSetter.execute(AdditionalLogFileSetter.java:65)
        at com.sap.sdm.control.command.decorator.AbstractLogDirSetter.execute(AbstractLogDirSetter.java:54)
        at com.sap.sdm.control.command.decorator.SyntaxChecker.execute(SyntaxChecker.java:37)
        at com.sap.sdm.control.command.Command.exec(Command.java:42)
        at SDM.main(SDM.java:21)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Jan 6, 2009 9:54:45 AM   Info: Starting to save the repository
Jan 6, 2009 9:54:46 AM   Info: Finished saving the repository
Jan 6, 2009 9:54:46 AM   Info: Starting: Initial deployment: Selected software component 'EPBC'/'sap.com'/'SAP AG'/'1000.7.00.14.0.20071210152326''/'1' will be deployed.
Jan 6, 2009 9:54:46 AM   Error: Aborted: software component 'EPBC'/'sap.com'/'SAP AG'/'1000.7.00.14.0.20071210152326''/'1':
Failed deployment of SDAs:
development component 'irj'/'sap.com'/'SAP AG'/'7.0014.20071112134549.0000'/'1' : aborted
Please, look at error logs above for more information!
Jan 6, 2009 9:54:46 AM   Info: Starting to save the repository
Jan 6, 2009 9:54:47 AM   Info: Finished saving the repository
Jan 6, 2009 9:54:47 AM   Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Jan 6, 2009 9:54:47 AM   Error: -
At least one of the Deployments failed -
Jan 6, 2009 9:54:48 AM   Info: Summarizing the deployment results:
Jan 6, 2009 9:54:48 AM   Error: Aborted: /stage/stageecc1/AS_JAVA_DVD/51033513/DATA_UNITS/JAVA_J2EE_OSINDEP_UT/EPBC14_0.SCA
Jan 6, 2009 9:54:48 AM   Error: Admitted: /stage/stageecc1/AS_JAVA_DVD/51033513/DATA_UNITS/JAVA_J2EE_OSINDEP_UT/EPBC214_0.SCA
Jan 6, 2009 9:54:48 AM   Error: Admitted: /stage/stageecc1/AS_JAVA_DVD/51033513/DATA_UNITS/JAVA_J2EE_OSINDEP_UT/EPPSERV14_0.SCA
Jan 6, 2009 9:54:48 AM   Error: Admitted: /stage/stageecc1/AS_JAVA_DVD/51033513/DATA_UNITS/JAVA_J2EE_OSINDEP_UT/EPWDC14_0.SCA
Jan 6, 2009 9:54:48 AM   Error: Admitted: /stage/stageecc1/AS_JAVA_DVD/51033513/DATA_UNITS/JAVA_J2EE_OSINDEP_UT/UWLJWF14_0.SCA
Jan 6, 2009 9:54:48 AM   Error: Admitted: /stage/stageecc1/AS_JAVA_DVD/51033513/DATA_UNITS/JAVA_J2EE_OSINDEP_UT/SAPEU14_0.SCA
Jan 6, 2009 9:54:48 AM   Error: Processing error. Return code: 4
Awaiting for early reply,
Hi ,
I would like to add some of my observations
1. I checked in jcmon that SDM status is showing stopped.
2.I tried to start the SDM by executing the command StartServer.sh and got message that it was started successfully but in jcmon it is still showing as "stopped".
I am not sure whether the above problem is due to this.
Additionally, I would like to mention that my JDK version is 1.4.2_17 and platform is HP-UX11.31
Regards,
Moulinath
Edited by: Moulinath Ray on Jan 6, 2009 8:07 AM
Edited by: Moulinath Ray on Jan 6, 2009 8:08 AM

Hi,
Thank you very much for your reply.
1. I checked the file system.One file system is showing full.
DevFS                   11      11       0 100% /dev/deviceFileSystem
Please let me know how can I reduce it / deletion of which files will not cause any harm?
2. There is space remaining in Database.So, no problem with it.
3. I found the following message from sdm_log
$ tail dev_sdm
[Thr 2] Mon Jan 5 20:47:02 2009
[Thr 2] JLaunchRequestFunc: receive command:17, argument:0 from pid:14451
[Thr 2] JLaunchIShutdownInvoke: set shutdown interval (stop:1231168622/end:1231168742/TO:120)
[Thr 2] JLaunchProcessCommand: Invoke VM Shutdown
[Thr 2] JHVM_FrameworkShutdownDirect: invoke direct shutdown
[Thr 2] JLaunchISetState: change state from [Running (3)] to [Stopping (5)]
[Thr 6] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 6] SigISetIgnoreAction : SIG_IGN for signal 18
[Thr 6] JLaunchCloseProgram: good bye (exitcode = 0)
4. In jcmon also, the status is showing as stopped.
5. I tried to start the SDM by executing command Startserver.sh fron /usr/sap/<SID>/DVEBMGS00/SDM/program
But it is not starting.The process is getting hanged.
$ ./StartServer.sh
running on HP-UX better use the '-XdoCloseWithReadPending' option
Starting SDM - Software Deployment Manager...
tc/SL/SDM/SDM/sap.com/SAP AG/7.0014.20071029094708.0000
JStartupFramework is active
Operation mode of SDM in JStartupFramework is "Standalone". Simply start the server.
Initializing Network Manager (50017)
Starting SDM Server listening on port 50018
SDM started successfully.
Redirecting output to the two files "/usr/sap/IN1/DVEBMGS00/SDM/program/log/sdm_server.out" and "/usr/sap/IN1/DVEBMGS00/SDM/program/log/sdm_server.err" respectively.
6. One more point to mention is that the value of one kernel parameter "nkthread" is not matching with prescribed value>=10000. But I could not change the value and so proceeded with the installation.Can this be a root cause? While installing ECC only with ABAP+JAVA , I did not find any problem but this time I am facing the problem.
Please let me know your valueable inputs.
Thanks and Regards,
Moulianth
N.B. I just now checked the file system size of my ECC6.0 installation with ABAP+JAVA which finished successfully.There also the device file system was full.So, it seems that this is not the problem.
Edited by: Moulinath Ray on Jan 7, 2009 5:21 AM

Problem while installing CS6, Please Help

Hello everyone, I almost search every help available around the internet for my problem and can't figure that out. Hope you guys might had better knowledge about that. I am facing a problem while installing Photoshop CS6 version and I already deleted my previous version and I am receiving the pop of "LOW COMPATIBILITY". Please tell me what might be the problems and the way to get out of this situation so that I can continue doing work for my deals site dealaboo.

Hi,
Please share your system configuration on which you are trying to install Ps CS6.
Regards,
Ashutosh
Ps Installer QE

Problem while installing solaris 10 on HP proliant DL 380 G5.

Hi,
facing problem while installing solaris 10 05/09 on HP proliant DL 380G5. The array controller is E200.
i have installed the raid controller driver CPQary3-2.1.0-solaris10-i386, it is going ahead but not detecting the whole hard disk space. My hard disk space is SAS 146GB. There are two 146GB hard disk present. It is showing only 978 MB & only one hard disk. So please help me out. my mail ID is [email protected]

I have a similar issue trying to load Solaris 10u4 on an IBM x236.
I had to put in a recognized SCSI card, attach an external array to the card, and install Solaris 10u4 on the array. Then I had to install the correct driver from OpenSolaris (an Adaptec one for IBM ServeRAID), and do a live upgrade onto the now-visible internal disks. Then I removed the array and cleaned up the traces from the live upgrade.
You may have to do something similar.
And last month the boot drive got corrupted when power was interrupted. "Oops. Wrong plugs..." This time the external array will stay connected.

Re: problem while installing WEB-enyterprise

Ciao Rajeev
It looks like you don't have the http directory under your active
environment.
Did you copy the http structure from '$FORTE_ROOT/appdist/webenv' to
'$FORTE_ROOT/appdist/WhateverYourEnvironment' ?
peace
Claudio
-----Original Message-----
From: Rajiv Srivastava <[email protected]>
To: [email protected] <[email protected]>
Date: Tuesday, January 19, 1999 8:48 PM
Subject: problem while installing WEB-enyterprise
while running escript to install HTTP library on my machine(WINNT server)
i am getting a error -
system Error : There are no distributions available for the application
HTTP
can anybody help.
rajeev
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Starmgmjo,
Thanks for posting you issue. Kindly browse the below mentioned URLs to install SharePoint 2013 Step by Step
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server
http://sharepoint-community.net/profiles/blogs/configured-domain-services-controller-and-create-users-and-groups
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-1
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-2
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-3
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing : "mac os x snow leopard cannot be installed on this computer" And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :
"mac os x snow leopard cannot be installed on this computer"
And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1
Intel Core 2 Duo
1.83Ghz
l2Cache: 2mb
Memory : 2GB
Bus Speed: 667MHz
Please help me......
Thanks

Actually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
Please suggest me what to do???
Thanks

Have a problem while installing Asmlib packages

hi all
I have some problem while installing ASMlib packages.
my OS=Redhat linux 5.3
kenel version using this command uname -r=2.6.18-128.el5
I have downloaded packages and successfully installed following 4
oracleasm-support-2.1.7-1.el5.i386.rpm
oracleasmlib-2.0.4-1.el5.i386.rpm
oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
oracleasm-2.6.18-128.el5-debuginfo-2.0.5-1.el5.i686.rpm
but while installing following got error
rpm -ivh oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686.rpm
kernel-debug = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686
rpm -ivh oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686.rpm
kernel-PAE = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686
rpm -ivh oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686.rpm
kernel-xen = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686
thanx in advance

I think you just need below rpms to configure asmlib:
oracleasm-support-2.1.7-1.el5.i386.rpm
oracleasmlib-2.0.4-1.el5.i386.rpm
oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
Read this thread:
Error install ASMLib on RedHat linux

A problem while installing webdynpro

Hi all:
there is a problem while installing webdynpro:
The SAP NetWeaver Developer Studio 7.0.17 Setup has not successfully installed all selected components on your computer, either because a component could not be installed or the process has been aborted.
Click Finish to exit the wizard. For detailed error descriptions, please open file://D:\nwds\NWDS\NWDS\J2EE-R~1\IDE\setup\saplogvw.exe .
The following program files could not be registered:
c:\windows\system32\librfc32.dll
The installed applications may not function correctly until all program files are successfully installed.
Could you please tell me how to solve it ?

Hi
Please have a look on these similar thread
1.[Problem in installation SAP Netweaver 2004s |Problem in installation SAP Netweaver 2004s;
2.[Installation error during installing SAP NetWeaver developer studio|Installation error during installing SAP NetWeaver developer studio 7.0.11;
Best Regards
Satish Kumar

Problem while Installing adobe pro X

we have purchased adobe CS6 full version at biotech park, lucknow. and facing some problem while installing adobe pro X component out of all the given component. kindly help me on this..

What system? What is the exact error? Provide more info and the install error summary.
Mylenium

Problem while installing SAP netweaver developer workplace

hi,
I hav a problem while installing SAP netweaver developer workplace .An error has occured while processing service ´developer workplace installation´.This error occured in phase 14 of 25 ie while unpacking SCS Client.error is as follows:-
[Cannot connect to host uklonki1 Connection refused: connect, -813.]
the database is online and the x-server is also started.hope anyone can help me in this problem.
with regards,
Jaisamma

Hi Michael,
I have tried that, but the result remains the same.
Manish

I am experiencing a problem while installing Adobe Flash player 10

I am experiencing a problem while installing Adobe Flash player 10

iam e
xperiencing aproblem while installing adobe flash player10

Pages is taking annoyingly long to download and install. Any of you faced similar problems while installing it?

ages is taking annoyingly long to download and install. Any of you faced similar problems while installing it?

Who knows what "ages" means to you, or what speed Internet connection you have, or what else is happening on your computer or network.
Pages/iWork are not small so it can take a while. Sometimes heavy demand at the Apple end can slow their server as well.
Peter

Problem while installing NWSneakPreviewSP11

Hi All,
I am facing a problem while installing NWSneakPreviewSP11.In installation 29 phases available.
It complete 17 phases successfully but get stuck at 18 phase.
The 18 phase is "Load java DataBase Content" and At status bar it's showing Info:"EP_LOCK_APPLS loaded" message.I have seen view Log also this is not showing any error Message.
What could be the possible reason to get stuck installation ....?
Plz tell me how can i resolve this problem.
Arun Sharma

Some of the reasons could be:
1. You do not have sufficient DB Space
2. If it is SP11, you did not set your system Timezone to "Amsterdam, Berlin..." which is +1 GMT
3. You might be using JDK other than 1.4.2_08 (this problem was reported when 1.4.2_10 was used)
HTH
Venkat

I am facing problem while installing iTunes

I am facing problem while installing iTunes with this error
"There is problem with you installer package. A program required for this install to complete could not be run."

Hi Owen,
I have tried .net Package & Deployment as well as InstallShield 2008. finally i have tried B1DE also. B1DE gives us template only in vb.net but not in C#.net and i want this in c#.net.
I was trying to understand the code that it creates. I won't be able get the code also.
I would like to go from other way apart from B1DE.
Need Urgent Help...

Problem while installing ECC 5.0 on RHEL

Similar Messages

Maybe you are looking for