Problem while installing Setup package

Hi all,
A week before i installed setup package on one device it worked perfectly fine.
Today i created new setup package with parameter sets( MI_CONFIG and included parameter MobileEngine.Sync.Gateway.Service=/sap/bc/MJC/mi_host
MI.Sync.ProtocolVersion=251500
And did not added these two lines in Mobileengine.config file.
My device is looping between two screen Ie Logon screen and change password screen. Whenever i enter the username and password it enters into Change password screen and then again to logon screen.
What can be the problem?
Thanks and Regards
Neha Kapoor

Hi Neha
   This is because after after you have created a setup package, a configuration tells the user to change his password on this first login to the client. If you open the MobileEngine.config file you will find an entry called <i><b>MobileEngine.Security.PasswordChangeRequired</b></i> with a value true.  Just set the value to false and restart MI.  If the parameter is not present, add the same and restart.  This should solve your problem and the change password page will never appear again.
Best Regards
Sivakumar

Similar Messages

  • Have a problem while installing Asmlib packages

    hi all
    I have some problem while installing ASMlib packages.
    my OS=Redhat linux 5.3
    kenel version using this command uname -r=2.6.18-128.el5
    I have downloaded packages and successfully installed following 4
    oracleasm-support-2.1.7-1.el5.i386.rpm
    oracleasmlib-2.0.4-1.el5.i386.rpm
    oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
    oracleasm-2.6.18-128.el5-debuginfo-2.0.5-1.el5.i686.rpm
    but while installing following got error
    rpm -ivh oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686.rpm
    kernel-debug = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686
    rpm -ivh oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686.rpm
    kernel-PAE = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686
    rpm -ivh oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686.rpm
    kernel-xen = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686
    thanx in advance

    I think you just need below rpms to configure asmlib:
    oracleasm-support-2.1.7-1.el5.i386.rpm
    oracleasmlib-2.0.4-1.el5.i386.rpm
    oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
    Read this thread:
    Error install ASMLib on RedHat linux

  • Problem while creating setup package

    Hi all,
    A week i created a setup package With SP18 0.0 . Everything worked fine..
    I download the Sca file for NWMADMIN AND NWMCLIENT and
    Today i deployed Patch 0.2  to NWMADMIN and Patch 0.6 to NWMCLIENT .
    I am getting these errors..
    0050 tc.mobile.admin.bl  170005 20070327 Error while trying to save the download url in setup package
    0050 tc.mobile.admin.bl.setup  170005 20070327 Error while trying to create the cab archive for setup package.
    0050 tc.mobile.admin.bl.setup  170005 20070327 Error while trying to create a cab file for setup package.
    0050 CAB CREATION LOG  170004 20070327 Error: Required file "D:\cabwiz.ddf" not found.
    Thanks and Regards
    Neha Kapoor

    Hi Prashantha,
    I could download SDK for Windows Mobile 2003-based Pocket PCs  from site http://www.microsoft.com/downloads/details.aspx?FamilyID=9996b314-0364-4623-9ede-0b5fbb133652&displaylang=en&Hash=%2fiQ91xWkO3zOCMv67Sphd8Q0HdCZtTMdWz3Ec5iPNq7%2fhrGF7rmyOcGv3trXOdGA8c6Qyc%2bVOlTpsmrahqFb5A%3d%3d.
    Now should i follow the steps given in http://help.sap.com/saphelp_nw04/helpdata/en/45/1eb142a174c811e10000000a1550b0/frameset.htm
    And create a Cabwiz file . Can i do this on my pc and zip the file and send it to basis and copy it on server or this should  be done on server itself.
    Thanks and Regards
    Neha Kapoor

  • A problem while installing webdynpro

    Hi all:
          there is a problem while installing webdynpro:
    The SAP NetWeaver Developer Studio 7.0.17 Setup has not successfully installed all selected components on your computer, either because a component could not be installed or the process has been aborted.
    Click Finish to exit the wizard. For detailed error descriptions, please open file://D:\nwds\NWDS\NWDS\J2EE-R~1\IDE\setup\saplogvw.exe .
    The following program files could not be registered:
         c:\windows\system32\librfc32.dll
    The installed applications may not function correctly until all program files are successfully installed.
    Could you please tell me how to solve it ?

    Hi
    Please have a look on these similar thread
    1.[Problem in installation SAP Netweaver 2004s |Problem in installation SAP Netweaver 2004s;
    2.[Installation error during installing SAP NetWeaver developer studio|Installation error during installing SAP NetWeaver developer studio 7.0.11;
    Best Regards
    Satish Kumar

  • I am facing problem while installing iTunes

    I am facing problem while installing iTunes with this error
    "There is problem with you installer package. A program required for this install to complete could not be run."

    Hi Owen,
    I have tried .net Package & Deployment as well as InstallShield 2008. finally i have tried B1DE also. B1DE gives us template only in vb.net but not in C#.net and i want this in c#.net.
    I was trying to understand the code that it creates. I won't be able get the code also.
    I would like to go from other way apart from B1DE.
    Need Urgent Help...

  • Problem while installing CS6, Please Help

    Hello everyone, I almost search every help available around the internet for my problem and can't figure that out. Hope you guys might had better knowledge about that. I am facing a problem while installing Photoshop CS6 version and I already deleted my previous version and I am receiving the pop of "LOW COMPATIBILITY". Please tell me what might be the problems and the way to get out of this situation so that I can continue doing work for my deals site dealaboo.

    Hi,
    Please share your system configuration on which you are trying to install Ps CS6.
    Regards,
    Ashutosh
    Ps Installer QE

  • Error 1719. The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. Getting this error while installing the package in the windows 2012.

    Getting below mentioned error while installing a package  in the windows 2012 server remotely through psexec command
    Error 1718. Windows Installer Service could not be accessed.
    The same msi is getting installed local in through when we are doing through manually
    Please help on the same

    Hi Rahulan,
    Would you please let us know current situation of this issue? If any update, please feel free to let us know.
    Just addition, please refer to following threads and check if can help you.
    The Windows Installer Service could not be accessed.
    error 1719 windows installer service could not be accessed ....
    Hope this helps.
    Best regards,
    Justin Gu

  • Problem while installing solaris 10 on HP proliant DL 380 G5.

    Hi,
    facing problem while installing solaris 10 05/09 on HP proliant DL 380G5. The array controller is E200.
    i have installed the raid controller driver CPQary3-2.1.0-solaris10-i386, it is going ahead but not detecting the whole hard disk space. My hard disk space is SAS 146GB. There are two 146GB hard disk present. It is showing only 978 MB & only one hard disk. So please help me out. my mail ID is [email protected]

    I have a similar issue trying to load Solaris 10u4 on an IBM x236.
    I had to put in a recognized SCSI card, attach an external array to the card, and install Solaris 10u4 on the array. Then I had to install the correct driver from OpenSolaris (an Adaptec one for IBM ServeRAID), and do a live upgrade onto the now-visible internal disks. Then I removed the array and cleaned up the traces from the live upgrade.
    You may have to do something similar.
    And last month the boot drive got corrupted when power was interrupted. "Oops. Wrong plugs..." This time the external array will stay connected.

  • Re: problem while installing WEB-enyterprise

    Ciao Rajeev
    It looks like you don't have the http directory under your active
    environment.
    Did you copy the http structure from '$FORTE_ROOT/appdist/webenv' to
    '$FORTE_ROOT/appdist/WhateverYourEnvironment' ?
    peace
    Claudio
    -----Original Message-----
    From: Rajiv Srivastava <[email protected]>
    To: [email protected] <[email protected]>
    Date: Tuesday, January 19, 1999 8:48 PM
    Subject: problem while installing WEB-enyterprise
    while running escript to install HTTP library on my machine(WINNT server)
    i am getting a error -
    system Error : There are no distributions available for the application
    HTTP
    can anybody help.
    rajeev
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Hi Starmgmjo,
    Thanks for posting you issue. Kindly browse the below mentioned URLs to install SharePoint 2013 Step by Step
    http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server
    http://sharepoint-community.net/profiles/blogs/configured-domain-services-controller-and-create-users-and-groups
    http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-1
    http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-2
    http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-3
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :  "mac os x snow leopard cannot be installed on this computer"  And My Mac Configuration details:  Model Name: Mac Mini Model Identifier: Macmini2,1

    Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing : 
    "mac os x snow leopard cannot be installed on this computer" 
    And My Mac Configuration details:  Model Name: Mac Mini Model Identifier: Macmini2,1
    Intel Core 2 Duo
    1.83Ghz
    l2Cache: 2mb
    Memory : 2GB
    Bus Speed: 667MHz
    Please help me......
    Thanks

    Actually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
    Please suggest me what to do???
    Thanks

  • Problem while Installing adobe pro X

    we have purchased adobe CS6 full version at biotech park, lucknow. and facing some problem while installing adobe pro X component out of all the given component. kindly help me on this..

    What system? What is the exact error? Provide more info and the install error summary.
    Mylenium

  • Problem while installing SAP netweaver developer workplace

    hi,
    I hav a problem while installing SAP netweaver developer workplace .An error has occured while processing service ´developer workplace installation´.This error occured in phase 14 of 25 ie while unpacking SCS Client.error is as follows:-
    [Cannot connect to host uklonki1 Connection refused: connect, -813.]
    the database is online and the x-server is also started.hope anyone can help me in this problem.
    with regards,
    Jaisamma

    Hi Michael,
    I have tried that, but the result remains the same.
    Manish

  • I am experiencing a problem while installing Adobe Flash player 10

    I am experiencing a problem while installing Adobe Flash player 10

    iam e
    xperiencing aproblem while installing adobe flash player10

  • Problem while executing the package

    Hi Guys,
    I am getting the problem while executin the package for 1 of the interface named PRE_SYNC_EX_ARMY_VEH_DEL.
    The source tables are EX_ARMY_VEH_TMP and CONTROL_DEL & target table is CONTROL_DEL
    All the three tables are in the same schema named RTO_STAGE.
    I am looking in the operator as at the first session is in the process(running mode) with "DROP FLOW TABLE" as the message while all other sessions are in the waiting mode related to that interface PRE_SYNC_EX_ARMY_VEH_DEL.The previous interface before it ie PRE_SYNC_AXLE_DEL & PRE_SYNC_AXLE_DELNR is running okk(with all succesful session).
    **In one statement I can summerize that execution of package is halting/stopped at one interface & not showing error in operator(showing running)**
    what would be the problem?
    Thanx
    Edited by: user8849294 on Mar 1, 2010 10:17 PM
    Edited by: user8849294 on Mar 2, 2010 9:36 PM
    Edited by: user8849294 on Mar 2, 2010 9:43 PM

    Hi,
    You didn't mention the exact error.
    Did you check if your interface succeeds outside the Package?
    If yes, have you included any odiFileWait event which's why other tasks are kept in Wait mode?
    In any case, if there's an error, the task with the red-colored icon shows the one with problem. Double-click it & go to the Execution tab to get the exact error

  • Pages is taking annoyingly long to download and install. Any of you faced similar problems while installing it?

    ages is taking annoyingly long to download and install. Any of you faced similar problems while installing it?

    Who knows what "ages" means to you, or what speed Internet connection you have, or what else is happening on your computer or network.
    Pages/iWork are not small so it can take a while. Sometimes heavy demand at the Apple end can slow their server as well.
    Peter

Maybe you are looking for

  • Help with creating a custom table cell editor?

    hi, i was reading up on various tutorials and trying to write codes that pops up a simple calendar when clicked on text of the Date class in a table, so far, i can't seem to get my classes working.. the following is some classes i've written for this

  • How To create custom login and create user pages

    Where can I find documentation that discusses how I can create a custom login page and create new user page? Also, I cannot find how to get away from the default login page. I am using 9iAS/Portal R2. Bill G...

  • IPhone 2G creating problems.

    I'm having an iPhone 2G. I tried erasing all data from it but it got hanged (I did it from the phone itself, not using iTunes). While starting, it showed "this may take upto 1 hour" but its been doing that for past 10 hours. Only an Apple sign along

  • HT1727 How do i get itunes to recognize music imported into the file structure?

    How do I get iTunes to recognize music imported into the file structure?

  • Updates are failing on Photoshop Elements 9 and Premier 9.

    I had to replace a failing hard drive so I deactivated my Photoshop Elements and Premier 9 before replacing the hard drive.  Reinstalled successfully.  Tried to do the updates but they fail with the following messages:  I have tried to run the update