Problem while issueing from batch

Dear Gurus
Suppose I have got a finished product x for this I have maintained a bom of suppose a, b,c all three roh.Out of these 3 I have say c batch managed. Through mb1c suppose I recieved roh c in different batches and kept them in the store.Now after creating production order in the order bom I am mentioning batch for the material c i.e I am telling from which batch it should issue.While issueing from mb1a to the order if I issue full quantity of c then the sytem is doing it without any problem from that batch that I mentioned in production order.If suppose I issue partial quantity of c then also it is taking but if I again try to issue the rest of the partial quantity the system is giving the error message 'issue quantity is greater than the reservation quantity'.For other roh which are not maintained in batch the system is allowing to issue as many number of times as required up to the reservation quantity.
Please tell me the reason why it is behaving like this
Regards
Sandip Sarkar

Hi,
As per the scenario given by you, you are not using the Automatic Batch determination Process for system to check the stock of BOM item material and assign the btach in Production order.
You are assigning manually the btach number in the production order component overview against the component. As you are not issuing the material in a single storke system is giving this message.
As suggested by Brahmankar you can either set the message as "Warning" OR "Balnk (No Information)" in Tcode : OMCQ and then try issuing the material against the production order in partial qualtities.
Hope this will help you.
Regards
Rdahka mk

Similar Messages

Optimization of raw material while issuing from the stores

Dear Techies,
I need a small information regarding,Optimization of raw materials of "arc shape "while issuing from the stores it self.
I will explain this with an example.
Say we require a flange ring.This flange ring can be manufactured using three -120 deg segments.
while calling the raw material below the flange rings material ,we have to give raw material dimensions of " 1X120 deg segment".System will accordingly multiply for the requirement of 3-segments.
In this situation is there any possibilty to " Club" the raw material to minimize the scrap,ie., we can accomdate another segment just below the other segment.With this type of arrangement I can optimize raw material required.
Is there any possibility in SAP that I can address this situation.
Thanks In advance,
With best regards,
Kiran.

Hello,
according to my knowlege it is not possible in SAP.
you have to create interface with Softwares like PRO-E sheet metal.
Regards
AM

Translation problem , While conversion from English to Poland

Hello Gurus
Pl suggest Translation problem , While conversion from English to Poland getting message
"Code page not found for Poland "
Code page 1401 exits in system
SAP version 4.6C
Best regards
Krish

Dear Vamsi,
Please check the below lonk may be it heps.
Translation to different languages. How??????
Regards
Pranay

Problem while migrating from JSF1.1 to JSF1.2

I'm facing the following issues while migrating from WAS 6.1 to WAS7.0
For this I have upgraded Jsf 1.1 to 1.2 and webmodule to 2.5, and following errors I'm having...
1. Description     The method getExceptionMessageString(String) is undefined for the type Util
2. Description The method getMyForm(UIComponent) in the type CommandLinkRenderer is not applicable for the arguments (FacesContext, UICommand)
3. Description     The method getName() is undefined for the type HtmlBasicRenderer.Param     LinkRendererWithName.java
4. Description     The method getParamList(UIComponent) in the type HtmlBasicRenderer is not applicable for the arguments (FacesContext, UICommand)
5. Description     The method getValue() is undefined for the type HtmlBasicRenderer.Param     LinkRendererWithName.java
Any alternative methods to those above methods in JSF1.2?
or am I need to upgrade any of the jaf dependencies?
Any suggestions are appreciated.
Thanks

i_oss wrote:
But you should consider implementing your Renderers only using the API and not extending the com.sun.faces.* implementation classes, or you might end up changing your code again on your next jsf updates.Hm, good thinking. I didn't think about the split between the API and the implementation.
OT question on that subject: is it really good design to have that split? JSF, JAXB, JAX-WS, even CDI has an API and an implementation part to it. But do we really need that? In the case of JSF, you have Mojarra and Myfaces (and some other obscure JSF implementation I believe). But why would you use Myfaces over Mojarra since they both solve the same problem and are both actively developed? Why do we have to deal with API/implementation conflict hell that you can often find when using JAXB, especially in a Mavenized environment? We have Weld as the implementation for CDI. What would move anyone to make a 'competing' implementation of it?
For something like JPA I can at least understand it; the persistence providers were already there before JPA saw the light of day. There was no need for Sun to create a competing implementation, so they provided the API in stead. But in all other cases... I just don't get it.

Problems while retrieving from content repository

Hi,
I am facing problems while retrieving documents stored the content repository. I have some pdf files as well as text documents stored in the content repository. I need to get retrieve the contents of the text files. My problem lies with how to retrieve the data from the files.
I have used SCMS_URL_GENERATE, followed by the FM ''HTTP_GET''. Though I do get the File id , my problem is how to proceed from this point. Should i wriite an RFC ?
Thanks and Regards,
Anie

Hi,
I checked the code one again - SCMS_URL_GENERATE is used to send url to the user (to open file in web browser).
SCMS_HTTP_GET code looks like this:
CONCATENATE <ls>-vbeln space <ls>-optarcnr
INTO lv_vbeln_obj
RESPECTING BLANKS.
SELECT SINGLE *
FROM toa01
WHERE sap_object EQ 'VBRK'
    AND archiv_id EQ co_arch
    AND ar_object EQ 'SDOINVOICE'
    AND object_id EQ lv_vbeln_obj.
CALL FUNCTION 'SCMS_HTTP_GET'
EXPORTING
    crep_id   = co_arch
    doc_id    = toa01-arc_doc_id
    comp_id   = 'data'
    length    = 0
    no_cache = no_cache
IMPORTING
    length    = comp-size
    mimetype = comp-type
TABLES
    data      = comp-bin
EXCEPTIONS
    not_found = 1
    OTHERS    = 2.
IF sy-subrc IS NOT INITIAL.
    PERFORM log_create USING <ls>-vbeln.
ENDIF.
IF comp-bin IS NOT INITIAL.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      bin_filesize = comp-size
      filename     = dstpc
      filetype     = 'BIN'
    TABLES
      data_tab     = comp-bin
    EXCEPTIONS
      OTHERS       = 1.
IF sy-subrc IS NOT INITIAL.
    PERFORM log_create USING <ls>-vbeln.
ELSE.
    MESSAGE s000(38) WITH 'Success'.
ENDIF.
ENDIF.
Regards,
Przemysław

Urgent : problem while migrating from forms 6i to 9i

We are trying to upgrade forms 6i to forms 9i.
One of our forms is using the host command to call a shell script . This command worked successfully in the form when it was
in character mode in forms 6i. But we are facing problems while deploying it on web using forms9i.
Would appreciate an early response.
Regards ,
Pooja

Hi Pooja,
1. Please check out the script by running it manually in the App Server Machine.
2. If you are using any environment variables in the shell script, that are not defined in the shell script itself, then try defining in the shell script itself. Because, the environment variable that you are using might not be availble for the script while running using host.
HTH,
Regards,
Arun

Problem while migrating from Sybase to Oracle using Quick Migrate

Hi,
For SQL Developer version 2.1, while migrating from sybase to oracle, Using Quick migrate, during data move step, for the rows having ''(Blank) values in TEXT data type in SYBASE, which is convertd to CLOB in Oracle, the migration for that table terminates at that row.
However, NULL values in Sybase TEXT data type are successfully inserted in Oracle CLOB.
How can we overcome this?

reproduced and see exception in console, bug logged.
Edited by: Jade Zhong on Feb 1, 2010 6:10 PM

"Default " problem while migrating from mysql to oracle.

I'm migrating from mysql3.23 to oracle9i via the OMWB tool.While migrating i'm getting an error message "Failed to create default for the table <table>:ora00907 missing right parenthesis".This error is due to the difference in the syntax used for the keyword "default" in mysql and oracle.In mysql we have to give after the Not Null option whereas in oracle we have to give before Not Null.
The problem is i'm migrating via the OWMB tool.Is is possible to handle this error with the help of tool itself.
Thanks
Jai.M

Jai, I'm having Frank have a look at this for you to see if we can replicate it ans help solve this issue for you. are there any issues logged on the mysql site regarding saving blobs as file?
thanks
Barry

Problem while cloning From RAC to Non RAC

Hi
Can any body help me to solve this problem occured while cloning my RAC database of EBS 12.06 to Non RAC
APPS Password : Log file located at /dump/rmsbkp/db/tech_st/10.2.0/appsutil/log/RMS_devmdb1/ApplyDBTier_03240738.log
- 50% completed Determining Source system database type ("single" or "rac").
RC-50004: Fatal: Error occurred in ApplyDatabase:
error in opening zip file
ERROR while running Apply...
Wed Mar 24 10:42:07 2010
ERROR: Failed to execute /dump/rmsbkp/rac/oracle/product/10.2.0/rac/appsutil/clone/bin/adclone.pl
Please check logfile.
oradev@devmdb1/dump/rmsbkp/rac/oracle/product/10.2.0/rac/appsutil/clone/bin$>
I Passed the following parameters :
Provide the values required for creation of the new Database Context file.
Target System Hostname (virtual or normal) [devmdb1] :
Target Instance is RAC (y/n) [y] : n
Target System Database SID : RMS
Target System Base Directory : /dump/rmsbkp/rac/oracle/product/10.2.0/rac
Target System utl_file_dir Directory List : /usr/tmp
Number of DATA_TOP's on the Target System [2] : 1
Target System DATA_TOP Directory 1 : /dump/rmsbkp/db/apps_st/data/RMS/datafile
Target System RDBMS ORACLE_HOME Directory [dump/rmsbkp/rac/oracle/product/10.2.0/rac/db/tech_st/10.2.0] : /dump/rmsbkp/db/tech_st/10.2.0
Do you want to preserve the Display [rmsmdb1:0.0] (y/n) ? : n
Target System Display [devmdb1:0.0] :
Do you want the the target system to have the same port values as the source system (y/n) [y] ? : y
RC-50220: Warning: Database Port: 1525 is not free. Unable to preserve the port settings from source system.
Target System Port Pool [0-99] : 7
and here are the errors from logfile:
/dump/rmsbkp/db/tech_st/10.2.0/appsutil/scripts/RMS_devmdb1/addlnctl.sh start RMS
You are running addlnctl.sh version 120.1
Logfile: /dump/rmsbkp/db/tech_st/10.2.0/appsutil/log/RMS_devmdb1/addlnctl.txt
Starting listener process RMS ...
Listener RMS has already been started.
addlnctl.sh: exiting with status 0
.end std out.
.end err out.
checking DB Connection...
DEBUG: checkDBConnection in()
ADX Database Utility
getConnection() -->
sDbHost : devmdb1
sDbDomain : mof.gov.kw
sDbPort : 1528
sDbSid : RMS
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@devmdb1.mof.gov.kw:1528:RMS
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=devmdb1.mof.gov.kw)(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=RMS)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=devmdb1.mof.gov.kw)(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=RMS.mof.gov.kw)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
DEBUG: checkDBConnection out()
Thanks for your help
Mohamed

Hi I passed the correct parameters and i reached the following:
/ 50% completed Determining Source system database type ("single" or "rac").
| 50% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
Wed Mar 24 12:53:05 2010
ERROR: Failed to execute /dump/rmsbkp/RMS/rac/oracle/product/10.2.0/rac/appsutil/clone/bin/adclone.pl
Please check logfile.
In the logfile:
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : devmdb1
sDbDomain : mof.gov.kw
sDbPort : 1525
sDbSid : RMS
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@devmdb1.mof.gov.kw:1525:RMS
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HPUX-ia64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=devmdb1.mof.gov.kw)(PORT=1525))(CONNECT_DATA=(SERVICE_NAME=RMS)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HPUX-ia64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=devmdb1.mof.gov.kw)(PORT=1525))(CONNECT_DATA=(SERVICE_NAME=RMS.mof.gov.kw)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=devmdb1.mof.gov.kw)(PORT=1525))(CONNECT_DATA=(SERVICE_NAME=RMS.mof.gov.kw)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
Thanks
Mohamed

Communication Channel Problem while reading from database

Hi,
I have a JDBC to IDoc scenario.
The database here is AS400 and i need to read data from AS400 tables and send it to SAP IDocs.
The communication channel picks up the data from AS400 based on the query and builds the IDocs.
Suddenly the channel stops working and it doesnt pick up the data from AS400. When we change the name of the Communication Channel, it again starts picking up the data but again for some period.
It sounds really strange as this is happening only with AS400 database and not it works perfectly when connecting to an SQL Server database.
Please help me out in resolving this issue.
Regards
Kiran.

Hi Kiran
Can you check the Notes 717376 ,990892 and try to implement.
Some tips:
This error is caused by some optimization in the IBM VM for AS400 which can be disabled through the JIT compiler settings. The following VM setting -Dos400.run.mode=jitc must be set, according to note 717376. Any other value for this setting, as e.g. jitc_de can cause the described problem
Also, please share the trace, so that, it would help to identify the problem.
Also try to change the property in Vis Admin
"cluster-data" -> "Global server configuration" -> "managers" -> "ApplicationThreadManager" -> "MaxThreadCount" ( like 400)
Regards
Chilla

Problem While Upgrading from ECC 5.0 to ECC 6.0

Hi Experts,
I am doing project on upgrading.
there is one program in ECC 5.0, and it is working fine in ECC 5.0
But while upgrading to ECC 6.0 it is giving syntax error.
below I am sending the code.
BEGIN OF lty_s_ekab_key,                             "1001282
         konnr TYPE ekab-konnr,
         ktpnr TYPE ekab-ktpnr,
         ebeln TYPE ekab-ebeln,
         ebelp TYPE ekab-ebelp,
       END OF lty_s_ekab_key.
CLASS lcl_entity_ekab DEFINITION INHERITING FROM lcl_entity_any.
PUBLIC SECTION.
    METHODS: constructor,
             if_any_table_mm~read_line REDEFINITION,
             if_any_table_mm~read_lines REDEFINITION.
PRIVATE SECTION.
    METHODS prefetch
               IMPORTING im_key               TYPE lty_s_ekab_key
               RETURNING value(re_t_ekab)     TYPE lty_t_sorted_ekab.
ENDCLASS.
after checking the systax error , i and getting error like lty_s_ekab_key is unknow.
Plz help me to solve in this issue.
Thanks and Regards
Ganesh Reddy

Hi
In my ECC 6 the defination is like yours:
CLASS lcl_entity_ekab DEFINITION INHERITING FROM lcl_entity_any.
PUBLIC SECTION.
    METHODS: constructor,
             if_any_table_mm~read_line REDEFINITION,
             if_any_table_mm~read_lines REDEFINITION.
PRIVATE SECTION.
    METHODS prefetch
               IMPORTING im_key               TYPE lty_s_ekab_key
               RETURNING value(re_t_ekab)     TYPE lty_t_sorted_ekab.
ENDCLASS.                    "lcl_entity_ekab DEFINITION
So try to re-generate the navigation index
Max

CLIENT_OLE2 date formatting problem while reading from Excel

I have installed webutil package and tested that everything works by running webutil_demo as well as WU_TEST_106 form. Then I had implemented reading from Excel sp. sheet using Oracle note 813535.1 (This note has OLE2 code sample on how to read an Excel file). Everything fine till now. The problem started when I have a date fiield to read from Excel. The field where the value is going to has format mask of 'DD-MM-RRRR'. When the date is displayed in the form, it shows '01-AUG-0009' instead of '01-AUG-2009'. I tried changing the date format to different formats in Excel but no go. I found one blog which stated that treat the date as number and use e.g. "cell_date_value:=to_date('01/01/1900','DD/MM/YYYY')+client_OLE2.get_num_property(cel,,'Value')+2" but it too did not change the display. Then I tried debugging and stepping through the code..the only thing I noticed that OLE2 function displayed the date with 2 digit year as 09 and when the code completed execution, the date went back to '01-AUG-0009'. Casting with 4 digit year at every step in the code is not helping to change final date display correctly. Any idea?!!!

Hi,
While reading the date column from excel, try using
m_col_val := OLE2.get_char_property(Workcell,'Text');
Instead of
m_col_val := OLE2.get_char_property(Workcell,'Value');
I think you problem will be solved...
hello...i meant client_OLE2
Regards
Dora
Edited by: Dora on Sep 16, 2009 11:05 AM

How to resolve the encoding problem while migration from informix9.4

When I migrate the informix9.4 database, there occur a error while migrate the data from informix to oracle.
Because the source tables has a column which type is "vchar", the some row's data length more the 4000, so migration workbench convert this column type from "vchar" to "clob" automaticly. But when the worbench has created the oracle model, and then migrate the data, there occured this error:
java.io.UnsupportedEncodingException: ISO2022CN_GB
java.sql.SQLException: index miss IN or OUT param:: 9
+     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)+
+     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)+
+     at oracle.jdbc.driver.OraclePreparedStatement.processCompletedBindRow(OraclePreparedStatement.java:1536)+
+     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2900)+
+     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:2996)+
+     at oracle.mtg.migrationServer.LoadTableData._migrateTableData(LoadTableData.java:1473)+
+     at oracle.mtg.migrationServer.LoadTableData.run(LoadTableData.java:326)+
+     at oracle.mtg.migration.WorkerThread.run(Worker.java:268)+
The encode in the source informix database is "zh_CN.gbk", and the encode in the destination database is "zh_CN.gbk", why this prompt the convert error?
Another information is that excluding this table, other tables can migrated success.
So, I guess this problem must has association with the type conversation which from "vchar" to "clob", can anyone help me with this, Thanks.

Hello,
well, the limit of 4000 is clear. From the Oracle® Migration Workbench Reference Guide for Informix Dynamic Server Migrations:
VARCHAR(m,r)
The Informix Dynamic Server VARCHAR data type stores varying length single-byte and multibyte character strings of letters, numbers. and symbols. The maximum size of this column is m, that can range from 1 to 255. The minimum reserved space is r. This is optional and defaults to 0 if not specified. The minimum reserved space can range from 0 to 255.
The comparable Oracle data type is VARCHAR2(n) that also stores variable-length character strings. An Oracle VARCHAR2(n), however, can have a maximum string length of between 1 and 4000 specified for n.
Specifying a minimum reserved space is useful if the data in a row is initially small but is expected to grow at a later date. If this is the case then, when migrating Informix Dynamic Server tables that contain VARCHAR columns consider increasing the PCTFREE value in the storage clause for these tables in the Oracle database. If this column is used in an index, then the PCTFREE values for the corresponding index storage should also be considered. For indexes based on VARCHAR columns, Informix Dynamic Server allocates the maximum storage.
So it is not surprising that the workbench is converting a VARCHAR with a length of more than 4000 to a CLOB.
But that does not explain the encoding exception. This might be a problem of the Informix JDBC driver.
Is the Informix JDBC Driver Programmer's Guide helpful for you: http://publibfi.boulder.ibm.com/epubs/pdf/6435.pdf
Can you reproduce the problem with a Java program against your Informix database using your Informix JDBC driver?
Which version of Informix JDBC driver are you using?
Best regards
Wolfgang

Tabular from problems while migrated from APEX 3.0 to 4.0.2

We are planning to upgrade our existing applications from 3.0 to 4.0, but I have noticed a few things about the tabular forms.
1. The wizard generated tabular form with checkboxes (and "select all" checkbox in the heading) functionality stopped working. The form has a link to the details page as a first column, and updateable column and checkboxes as the last two columns of the form. After the upgrade to 4.0 the "select all" checkbox is moved as a first heading while the checkboxes are still being the last column of the form and the form stopped working... unless you move the checkboxes as the first column in the form. It makes the form looking a little bit awkward (checkboxes, then the image link to the details page, then other columns and the updateable column at the end) and also inconvenient to jump from the left to the right for each record...
2. The tabular for still displays the headings and the export to csv link even when no data found... in 3.0 none of these happens.
Does anyone have any solution/work around for these?
Thank you.
Zhanna.

Finally finally found the problem.
The login page 101 was using a page template called "login". This template's Footer had a #FORM_CLOSE# text substitution tag that was commented out. As soon as I uncommented the tag out it worked.
Obviously this tag wasn't so critical in pre 4.1 and 4.2 hence why the problem wasn't previously exposed.
This is what the #FORM_CLOSE# tag causes to be generated within the HTML. I'm guessing that the page submit handler is looking for the hidden MD5 checksum item in order to prevent page manipulation of sorts. Because it can't find the tag it's throwing the error message.
<input type="hidden"
       name="p_md5_checksum"
       value="" />
<input type="hidden"
       name="p_page_checksum"
       value="B1CDAA06FE82920960DC892FC092C827"
       id="pPageChecksum" />
</form>
NOTE: The original template did not have a closing </form> html tag, so not sure how it ever worked in apex 4.0 or prior. It's certainly not visible looking at the HTML. Perhaps Apex 4.0 is less sensitive about that.

Problem while migrating from Was6.1 to WAS7.1

I'm in the process of upgrading WAS v6 to WAS V7, so for that first i'm upgrading JSF 1.1 to 1.2.
I just changed faces-config.xml and org.eclipse.wst.common.project.facet.core.xml version 1.1 to 1.2.
I thought these 2 changes are good to upgrade JSF.
but I'm seeing the following error.
Error creating component com.ibm.ws.runtime.component.CompositionUnitMgrImpl@20f620f6
com.ibm.ws.exception.RuntimeWarning: com.ibm.ws.webcontainer.exception.WebAppNotLoadedException: Failed to load webapp: Failed to load webapp: Failed to process bindings for metadata
at com.ibm.ws.webcontainer.component.WebContainerImpl.install(WebContainerImpl.java:382)
Any ideas around this problem would be appreciated.
Thanks
Edited by: user5447944 on Jun 6, 2011 7:30 AM

Hi,
We are migrating WAS6.0 to WAS 7.0 - JSF1.1 to JSF1.2
We have modified faces-config file as per your suggestion. But while trying to access the application we are getting the below error,
[6/7/11 22:40:36:520 EDT] 00000037 SystemOut O 2011-06-07 22:40:36,519 [WebContainer : 0 - ClientControllerServlet - ] DEBUG - action=locales
[6/7/11 22:40:36:537 EDT] 00000037 AdfFacesFilte W oracle.adf.view.faces.webapp.AdfFacesFilterHelper verifyFilterIsInstalled The AdfFacesFilter has not been installed. ADF Faces requires this filter for proper execution.
[6/7/11 22:40:36:579 EDT] 00000037 lifecycle E JSF1054: (Phase ID: RESTORE_VIEW 1, View ID: "") Exception thrown during phase execution: javax.faces.event.PhaseEvent[source=com.sun.faces.lifecycle.LifecycleImpl@403b403b]
[6/7/11 22:40:36:590 EDT] 00000037 SystemOut O 2011-06-07 22:40:36,590 [WebContainer : 0 - SessionCheckPhaseListener - ] DEBUG - page will be shown as user[null]
[6/7/11 22:40:36:590 EDT] 00000037 SystemOut O 2011-06-07 22:40:36,590 [WebContainer : 0 - SessionCheckPhaseListener - ] DEBUG - show page[true]
[6/7/11 22:40:36:591 EDT] 00000037 SystemOut O 2011-06-07 22:40:36,591 [WebContainer : 0 - CustomFacesServlet - ] ERROR - javax.servlet.ServletException: viewId:/brazil/web/brazil/client/languages.jsp - View /brazil/web/brazil/client/languages.jsp could not be restored.
[6/7/11 22:40:36:869 EDT] 00000037 AdfFacesFilte E oracle.adfinternal.view.faces.webapp.AdfFacesFilterHelperImpl _setupJboDomainStuff
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
at java.lang.reflect.Method.invoke(Method.java:611)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterHelperImpl._setupJboDomainStuff(AdfFacesFilterHelperImpl.java:192)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterHelperImpl.init(AdfFacesFilterHelperImpl.java:64)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.init(AdfFacesFilterImpl.java:96)
at oracle.adf.view.faces.webapp.AdfFacesFilter.init(AdfFacesFilter.java:58)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.init(FilterInstanceWrapper.java:140)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager._loadFilter(WebAppFilterManager.java:548)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.loadFilter(WebAppFilterManager.java:462)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.getFilterInstanceWrapper(WebAppFilterManager.java:319)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.getFilterChain(WebAppFilterManager.java:379)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:860)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:934)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:502)
at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:179)
at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3933)
at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:276)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:931)
at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1583)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:186)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:445)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:504)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:301)
at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:83)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:204)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:775)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:905)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1604)
Caused by: java.lang.IllegalStateException: ELResolvers cannot be added after the application initialization is complete.
at com.sun.faces.application.ApplicationImpl.setPropertyResolver(ApplicationImpl.java:424)
at oracle.adfinternal.view.faces.webapp.AdfModelHelper.init(AdfModelHelper.java:37)
... 34 more
Could you please help us to resolve this issue?
Regards,
Mohanraj M

Problem while issueing from batch

Similar Messages

Maybe you are looking for