Problem while loading Crystal report
Hi all
I'm Harinathan. I'm developing vb.net application with crystal report.
Good for you Nathan.
Have a good day,
Ludek
Similar Messages
-
Error while loading Crystal report
Professionals'
I have encountered an error while opening a crystal report 2008, I am using VB.NET 2005 with Business One. When I am running the source code it works fine. With ARD I am getting problem "Crystal report can not open". What should be the solution for that? I made ARD with all the required reports and added all DLL required for it.. Is it required to add any crystal report reference when creating ARD?
Thanks.Hi,
Are you checking the Addon in the Client or in the Working Machine....?
if it is client Machine install the Crystal Runtime and Check it out....
With Regards,
Madhu -
Issue while loading crystal Report.
Hi ,
Crystal report is getting loaded properly in the VS Viewer for Crystal report when we preview the report but when the same report is being loaded through application then following errors are being displayed:
1) "Object reference not set to an instance of an object." - - In the debug mode
2) "Load Report failed." - In the release mode.
The issue is not getting reproduced when we are viewing report directly in the VS-2012. Also there is no exception being raised in the code.
Crystal report version : VS13_0_5You are using Service Pack 5, current SP is 9. I'd recommend updating your install to that - not that the error has anything to do with the SP, but you always want to be as up to date as possible(?).
If you Google "Object reference not set to an instance of an object.", you will get a lot of help. Usually the error is a programming issue.
Your best bet is to look at a few samples here:
Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
Developer Help files are here:
SAP Crystal Reports .NET SDK Developer Guide
SAP Crystal Reports .NET API Guide
I'd also suggest reviewing the document Crystal Reports for Visual Studio 2005 Walkthroughs. No worries about the reference to VS 2005. Pretty well everything in that document applies to all subsequent versions of .NET and CR.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
An error has occurred while loading the report
Hello all,
I'm trying to view a Crystal Report from my CRM application and I receive the follow error message, but only when trying to view it on a laptop:
An error has occurred while loading the report. Please contact technical support.
Has anyone else run into this problem?
Thanks!Hello Eddie,
please post some more information about your problem.
What is the name of your CRM app?
Who developed this app?
Did it never work or do you get this error only now?
Always or only sometimes only?
In what versions and on what patchlevel are you working ?
Thanks for some more info
Falk -
Hi
I am having problem on using Crystal Report Viewer on one of my windows application.
I am not sure how to put the Crystal Report Viewer 11 Control onto the tool box.
I could found a Crystal Report Viewer control on my computer, but it is version 8.5.
I have also found another one which is Called Crytal ActiveX Report Viewer, i don't think it is the one I can use. As when I try to load a dummy report on to the Crytal ActiveX Report Viewer, It return an error. "specified type is not valid"
Please see the Code sample below.
private sub loadReport()
Dim r as New ReportDocument
'v is the name of the Crystal ActiveX Report Viewer Control
r.Load("C:\Report1.rtp")
v.ReportSource(r) <---It throw error on this line.
End Sub
Could you give me some advice about what have I done wrong, How to check if I have set up the Crystal Report Component correctly in my Visual Studio 2005 Standard edition.
Thanks in advances.
Many thanks
ChiVS 2005 Standard and Express editions do not come with Crystal Reports; only the Professional and higher editions will have CR bundled. However, I believe you can purchase CR XI R2 Developer and it will give you the components you need to create a VS .NET 2005 application using the Standard edition.
-MJ -
Hi there,
We have a problem on loading a report.
For some users, when they try to load the report the system prompts for username/ password.
This is a Web application system, where we use Windows authentication and impersonate=true.
I suppose that this problem might occur since users do not have access to C\Windows\Temp.
Thought for security reasons we do not want to give access to the users in this directory, and we do not want to change the temporary directory of windows ( from changing Temp Environment Variable)
We have also try thr bellow solution with no results:
"To change the CR temp folder, in registry, set the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Crystal Decisions
Report Application Server\InProcServer\TempDir "
Is tehre any way to change the default loading path for reports from C:\Windows\Temp to somthing else?
Thanks for your help.Hello Maria,
the reg key you are describing is for inproc RAS. In my opinion this has only limited importance for your problem as you more likely have a user authentication issue.
Please try to narrow down the problem that 'some user can / others can't log in'.
What is the difference between these users ? Please check the database settings / possible roles for these accounts.
Please also see if these user can access the reports in the designer or if they get the same database issue. Is it just one report / a group of reports or all reports where you face that issue ?
Thanks a lot
Falk -
Help needed while exporting crystal reports to HTML file format using java
Help needed while exporting crystal reports to HTML file format using java api(not using crystalviewer).i want to download the
html file of the report
thanksthe ReportExportFormat class does not have HTML format, it has got to be XML. Export to HTML is available from CR Designer only.
Edited by: Aasavari Bhave on Jan 24, 2012 11:37 AM -
Invalid Key code Error while installing crystal report server 11
While installing crystal report server 11,i am facing an erro which says Invalid Key code Error.I had raised this issue to SAP customer support and attaching the conversation that we had.PLEASE HELP me to resolve the issue.
MAILS--Dear Mohit,
Thanks for the patience.
We have received the below update from the Licensing Team.
You received your permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
You did not purchase these licenses for Crystal Reports Server, but purchased it for Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but you elected to use version XI instead and received key .
You would need to enroll the licenses in maintenance if you want to upgrade them.
In case of any queries please create a ticket via the Service Market Place.
Regards,
Jessy
Customer Interaction Center
SAP Active Global Support
Hello Jessy,
The customer received their permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
They did not purchase these licenses for Crystal Reports Server, they purchased Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but they elected to use version XI instead and they received key .
They cannot decide to upgrade now - they must enrol these licenses in maintenance if they want to upgrade them.
Kind regards,
Rosemary
From: BOSAPASIA
Sent: 29 September 2009 05:49
To: Savage, Rosemary
Subject: FW: Crystal Reports Server Installation Issue
Importance: High
HI Rose ,
Need your assistance on the below issue.
Customer purchased Crystal Report Server XI R2 in 2005. When he is trying to install it now, he is getting an Invalid Key code Error.
He has provided us the Scanned copies of the Key code and the registration number.Can you please help and check if he can be provided with a Keycode.
Regards,
Jessy
CIC Team Lead
Customer Interaction Center
Global Support Centre India
SAP Labs India Pvt Ltd
Hi,
Providing you with the required details to proceed further
Registration Number-
Registration Email Address-taxmantra.support
And also please find attached the scanned copy of the Registration key we got for the Crystal report server.
Dear Mohitk,
Thank you for your information.
I checked with the concerned colleague and received the below update:
Please check from where you got this key code. If from a paper, please scan it to us. Please let them track to the original paper or email.
If you have registered the key code, please provide us the registration number or registration email address so that we will try to check for you.
If you did not register before, as the promotion is over so the key code could not be replaced.
I request you to kindly check the same at your end and revert with the details.
Moreover, there are two ways for Crystal Report customer to get support.
One is customer with bundled product such like BOE and under maintenance. These customers will have an S-user ID and password to log a case in service market place via http://service.sap.com/message
A learning map was provided, listed on left column.
The other is customer with only Crystal report product, the support is via SDN.
http://service.sap.com =>Crystal Reports and Xcelsius Support=>Crystal Reports and Xcelsius Forums
Customers can first check whether other customer has got the same issue and find the reply from our engineers.
You may also post your own thread for support.
Anything else I could help, please do not hesitate to contact again.
Hi,
I am providing you with the details required to resolve the issue related to Crystal report installation,for reference of the issue please refer the mail below.
Please find attached the Scanned Document containing the details as per the details required by you.
Hope to see a quick resolution for the issue.
Dear Mohit,
Thank you for your e-mail.
As discussed, I understand that youu2019ve procured Crystal Reports Server 11 in 2006. However youu2019re facing issues with key codes while reinstalling the same. We request you to kindly provide us with below details for further assistance.
Your customer number:
Your customer name and address:
Purchase order number:
Any other products purchased along with Crystal Reports Server 11
Any S-User Id:
Any old case ID:
Please feel free to contact us if any further queries.
Hi,
I am raising this concern on behalf on Taxmantra project (Tata Consultancy Services noida).
We have bought licensed Crystal Reports Server 11 near by 2006.We are trying to install the crystal server but while installing ,we have encountered with an error message that:-
"The product key code you have entered is incorrect"
We are facing the same issue in 2006,I am attaching with this email the conversations that was held in 2006 to get the correct key code.
Please help us to resolve the issue as early as possible.
My contact number:
If you need any further information do let me knowAjit,
By design, the product is not able to be installed under the superuser account.
1. Create a new user and specify a home directory for the user without a quota set.
2. Copy or move the installation files to a directory that the new user can read. I suggest you move the installation files directly into the new user's home directory.
3. Logon as the new user (or su - newuser)
4. run the installation shell script using that new user's account.
NOTE: Ensure the system meets the requirements from the supported platforms documents.
.Tony -
I am facing a problem in a crystal report which is based on Infoset query
Hi All,
I am facing a problem in a crystal report which is based on Infoset query.in the Cost Analysis - Planned vs. Actual Order Costs
There are two querys like Query: CO_OM_CA_20_Q1 and InfoSet: ZBPBI131_INFO_ODVR. I build infoset query based on sap best practice user guide but problem is not able to find CO_OM_CA_20_Q1
Best Regards,
SrinivasHi,
I would first of all suggest you don't open the same question twice. this looks like a duplicate to this entry:
Best Practices v3.31 - SAP InfoSet Query connection
Did you assign the queries and the infosets to an InfoSet user group and you assign the SAP account to it as well ?
Ingo -
I am facing a problem in a crystal report which is based on Infoset query.i
Hi All,
I am facing a problem in a crystal report which is based on Infoset query.in the Cost Analysis - Planned vs. Actual Order Costs
There are two querys like Query: CO_OM_CA_20_Q1 and InfoSet: ZBPBI131_INFO_ODVR. I build infoset query based on sap best practice user guide but problem is not able to find CO_OM_CA_20_Q1Please re-post if this is still an issue to the Business Objects Integration Kits - SAP Forum or purchase a case and have a dedicated support engineer work with you directly
-
Database Error While Viewing Crystal Report In Infoview
Hi,
BO and Crystal Designer version is BO XI 3.1 SP2 FP2.6.
Issue:
While viewing crystal report for a particular user id in infoview, following error is coming:
Error in File EPACertificate.rpt: Database Connector Error
However, we are able to view the report in thick client Crystal Designer using same user id. This issue is occurring only for this user and rest of the users are able to view the report in Infoview and Crystal Designer.
It would be great if any of you can provie a solution to this issue.
Thanks in advance,
Jayaclosing it.
-
Error While running crystal report
Dear All,
i have some crystal reports in SAP.while opening any crystal report its through some error like "Error While running crystal report ".
Kindly suggested me how to do this .
Thanks&Regards,
P.PratapHi All,
Thanks for your reply,
already i close this Issue.
they have one addon for crysatl report .so it show error like Error while Running crystal report
thanks&Reagrds,
P.Pratap -
Error 1305 while installing Crystal Reports 2008, JavaSDK
While installing Crystal Reports from the original media on a new Lenovo Thinkpad running Windows XP Pro SP3 I get the following error while installing:
Error 1305: Error reading from File: c:\program files\Business Objects\javasdk\jre\audio\soundbank.gm. Verify that the file exists and that you can access it.
I have the option to retry or cancel, obviously cancel exits the installer. Retry just fails again. I have tried to access the file (which does exist) and I cannot because it is in use. I used Sysinternals process explorer to find out what has the file in use and it is msiexec.exe which is the Microsoft Installer service which is running in order to install CR2008.
I have tried restarting, setting permissions on the file and folder, uninstalling and reinstalling Java VM from Sun. I even tried killing msiexec (which killed the install). I even tried taking out all reference to java in a custom install.
I am at a loss on what to do next. Any help would be appreciated.
-MichaelI found that if I installed it from a copied local directory instead of the CD Rom that it worked
-
Getting Error while integrating Crystal reports with Java
Hi All,
I am getting below error while integrating crystal report with java
[java] os.arch = x86
[java] java.lang.NoSuchMethodError: com.crystaldecisions.Utilities.d.<init>
(Ljava/awt/Image;I)V
[java] at com.crystaldecisions.Utilities.af.try(Unknown Source)
[java] at com.crystaldecisions.Utilities.af.a(Unknown Source)
[java] at com.crystaldecisions.Utilities.af.<init>(Unknown Source)
[java] at com.businessobjects.crystalreports.viewer.applet.g.a(Unknown
Source)
[java] at com.crystaldecisions.ReportViewer.ReportViewer.start(Unknown
Source)
[java] at ReportViewerFrame.<init>(ReportViewerFrame.java:51)
[java] at JRCViewReport.launchApplication(JRCViewReport.java:29)
[java] at JRCViewReport$1.run(JRCViewReport.java:50)
[java] at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:
178)
[java] at java.awt.EventQueue.dispatchEvent(EventQueue.java:443)
[java] at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDi
spatchThread.java:190)
[java] at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDisp
atchThread.java:144)
[java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
ava:138)
[java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
ava:130)
[java] at java.awt.EventDispatchThread.run(EventDispatchThread.java:98)
Any help can be appreciated
KalyanHi All,
For got to mention i am using crystal reports XI release 2 with JDK1.4.
Kalyan -
Problem with the crystal reports XI
Portuguese
Boa Tarde, tenho um problema com o cristal reports XI.
ele esta em producao fazendo a consulta em um servidor mas quando eu acesso passando parametro connectionInfo.ServerName = <endereco do servidor> para um servidor de teste pelo VStudio 2005, ele nao busca os dados deste e continua acessando o servidor de producao.
gostaria de saber como consertar isso
English
Good afternoon, I have a problem with the crystal reports XI. him this in production making the consultation in a servant but when I access passing parameter connectionInfo.ServerName = I address of the servant > for a test servant for VStudio 2005, he doesn't look for the data of this and it continues accessing the production servant.Fabiano, here is what I understand of the issue:
1) You are using CR XI (I am not sure if release 1 or release 2)
2) you are using .NET 2005
3) you are trying to change the server name, but the report keeps giving you data from the original server
Please answer the following:
1) Are you using CR XI release 1 or release 2?
2) Can you change to the new server, using the Crystal Reports Designer?
3) Can you duplicate the issue on your development computer?
4) What Crystal Reports service pack are you on?
5) Are you connecting to the database using OLE DB?
Ludek
Maybe you are looking for
-
Hi all, first time posting but this site has helped me several times in the past so thank you for that, Having an absolute nightmare with an external drive. I've got a Hitachi Touro Pro 4TB USB 3.0 that recently had some trouble with the power supply
-
Create data source in BI 7.0?
hi, while creating data source in BI 7.0 , ( from flat file data) under extraction tab: character set settings : default and direct entry is there if i select direct entry i am getting character set and replacement character. what scenerio we use dir
-
Non video Seekbar code in as2. Can someone convert it to as3?
Hi all, I am a newbie in Flash. Found a code from somewhere that is written to use seekbar to control the complete timeline in as2. Just need help from somone to convert it into as3. This code is placed in the slider button that is held to move forwa
-
Hi Everyone, I have a new E540 and OneLink Pro and cannot get the DisplayPort or DVI port to work with my external monitors? I have tested the monitors and the cables and all works perfectly with my old docking solution(Dell E5530) I have checked the
-
GetOrdinal of AseDataReader Class is not doing case-insensitive search
hi, I am working on 12.5.4 version of sybase ASE.I am using 'Sybase.AdoNet2.AseClient.dll' to connect with database. I am using GetOrdinal method of ASEDatareader class (that as per documentation performs a case-sensitive lookup first. If it fails ,