Problem While loading Master data from R/3

Hi All,
When i am trying to load masters data from R/3 datasources to BW Info objects in Info provider menu data is coming to PSA but going to dta targets. the data is matching with the data in R/ 3 but
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
Info IDoc 1 : sent, not arrived ; IDoc ready for dispatch (ALE service)
and error message says ERROR 4 in the update.
Can you please help me in this regard . Its Urgent.

Hi,
Check for pending IDOCS in BD87 or SM58 and execute them.
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Refer this Tcodes for IDOC status.
WE02 Display IDoc
WE05 IDoc Lists
WE06 Active IDoc monitoring
WE07 IDoc statistics
WE08 Status File Interface
WE09 Search for IDoc in Database
WE10 Search for IDoc in Archive
WE23 Verification of IDoc processing
IDOC
www.erpgenie.com/sapgenie/docs/ale_whitepaper.doc
Check Note 561880 - Requests hang because IDocs are not processed.
OR
Transact RFC error
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
Thanks,
JituK

Similar Messages

Issue while loading master data from BI7 to BPC

Dear Experts,
I'm trying to load master data from BI7 to BPC NW using scenario 2 mentioned in the below document.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827
My requirement is need to load 0GL_ACCOUNT attribute and text data from BI7 system to BPC.
1.As mentioned in the How to...doc I had created a dimension called GL_ACCOUNT using BPC Admin client .
2.Able to see GL_ACCOUNT in RSA1, when I try to create a Transformation(step 17 , page-40) to load Attribute data I could not find source of transformation object as 0GL_ACCOUNT(which exist in BI7) . I could only able to see only dimensions available in BPC system when I click F4 in Name.
What could be the reason to not getting BI infoobject as source in BPC?
Thanks in advance...
regards,
Raju

Dear Gurus,
My issue got resolved. So far I'm trying to pull data from R/3>BW>BPC. In the existing land scape BW and BPC are 2 different boxes. That is the reason I couldn't able to see BW objects into BPC (since 2 are different boxes). To resolve the issue I have created a new infoobect (RSD1) in BPC and data loading is from R/3>BPC infoobject(which is created through RSD1)>BPC Dimension.
Thanks and regards,
Raju

Issue while loading master data from BI to BPC

Dear All,
I am loading master data from BI to BPC using the process chain /CPMB/IMPORT_IOBJ_MASTER. I ran the package and package status was success. But few member ID's which are available in BI are not getting loaded in BPC. Nearly I have 1300 ID's in BI. Out of 1300,only 1270 ID's are loaded in BPC.
I haven't restrict any ID's using conversion file as well.
What could be the reason? How can I overcome this and load all member's ID in BPC?
Thanks & Regards,
Ramesh.

Ramesh,
Whats the write mode you have chosen for the CPMB/IMPORT_IOBJ_MASTER chain ?
Check if you have the Update mode ..
Hope this helps...

BPC Error while loading master data from SAP BW

Hello Guru,
I have NW BPC 7.5 installed on BW server. Currently i have started to work on one application where i have to load master data first. I am loading master data for cost center.
I looked into the process chain "BPC: Import BW InfoObject master data" and i found that few processes are in GREEN color and few are in RED color (Display). is that correct or not ? then as per some of the thread i went to "BPC: Convert BW infoObject master data" --> SOURCE_TYPE = IP and added one parameter "FORMULA_FILE_NO". Then i saved this process chain and activated it.
I created transformation file in BPC and it got created successfully but while i try to load packages it throws me error.
Q. Do i need to have entire process chain with all processes in GREEN to have the master data in BPC ?
Q. Do i need to activate any BADI's for this or not ?
I appreciate your help in advance. I trie

Hello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM

While Loading Master data from BW Info Object

Hi,
What is the difference between the two options
"set filters by Attributes AND Hierarchies" and
"set filters by Attributes OR Hierarchies"
when we load master data attributes/texts from BW Info Object.
can someone please explain in detail with example.
Thanks,
Rishi

Hi Rishi,
While looking at your question -
What is the difference between the two options
"set filters by Attributes AND Hierarchies" and
"set filters by Attributes OR Hierarchies"
when we load master data attributes/texts from BW Info Object.
can someone please explain in detail with example.
This is not what you are explaining in second post.
Kindly close old threads properly if your queries are resolved , so that it will helps other.
Shrikant

Error while loading master data from R/3

Hi Friends,
            I'm just trying to load master data for the infoobject of type "0BUS_AREA", but i have got data into PSA, but not got into char, i have got an error stating that
Record 1 :No source system ID exists for source system (logical system) RD1CLNT100
In tran structure there are two objects not being populated 0LOGSYS & OSOURCESYSTEM, which might cause the problem.
Pls waiting for your replays
Thanx in advance
Balaji K.

Hi Aswin,
           Thanx for your replay, in that one column is there, "source system id" but it is empty, how to generate that two digit source system id and also there are three kind of tabs like
"Release IDs that are in use" "Suggest Source System IDs" & "Maintain Logical Systems"
         How to use and which one to use, and how to follow step by step to run loads once again by populating "OLOGSYS" & "OSOURCESYSTEM" ?
Pls clarify this problem
Regards.,
Balaji K.

Problem while loading Master data load

Hi,
i am loading master data for 0PROJECT. for attributes and text we do have delta.
for text after load added records will be 0 eventhough few records there and they are transferred records. i checked in RSA3 it has records.
can any body tell me the reason for this?
Thanks,
Vijaya

for full load only no of added records are 0 where transferred are 26.
i checked in master data table and all these records already present... may be becoz of that reason if i do full load and delta ...added is 0 only.
am i right in this? plz let me know.
Thanks,
Vijaya

Problem while loading master data - Help

Hi
I am using BI-7. I have Customer & Plant compounded in ZMat_Plant. I am trying to load zmat_Plant but getting following error.
I followed the solution as in link,but didnt worked: RSDMD 194: Error Loading 0Material 7.0 using 0SOURSYSTEM as compounding
Looking for your help... Thanks...
Diagnosis
    Data record 1 & with the key '00000000033000100000009 &' is invalid in value '00000000033000100000009 &' of the attribute/characteristic ZMAT_PLNT &.
System Response
    The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.

I used 'APLHA' conversion routine in infopackage, so the problem has been solved. Thanks...

Error 8 while loading the data from the souce system

Hi Gurus
Every day we are loading some data from one of our souce systems through process chain
But today all the loads failed complaining about error 8 while extacting the data
connection to source system is fine
we have the problem while loading master data from the same source system
any solution?
Thanks in advance

Hi,
Check with basis team regarding any patches applied in source system or not ? If yes then replicate all data sources and activate again.
hope it helps...
regards,
Raju

Duplication of records while loading Master Data.

Hi All,
I am facing problem while loading master data from 0BPARTNER_ATTR. The infopackage is getting failed showing message "44 duplicate record found. 32 recordings used in table 44 duplicate record found. 32 recordings used in table /BI0/XBPARTNER"
we can rectify manually but daily the loading is getting failed showing the same message. So Cvan anybody suggest me how to rectify this problem permanently. And Can you Explain me why the error is?
If i go to PSA and check i can find only one dulplicate record. I am not able to understand the Error Message.
With Regards,
Thilak
Edited by: thilak. neelam on Mar 10, 2009 1:46 PM
Edited by: thilak. neelam on Mar 10, 2009 1:47 PM

Hi,
there was (is?) a recent problem in the SAP BI 7.0 software, so that duplicates were removed during init load, but not during delta load. Although the DTP could not set currently (also an error that has already a SAP note). We added a manual removal using ABAP code to avoid upgrading to a new SAP version. That helped. The duplicates may also result from two full request that are loaded at the same time.
Hope this help to analyse the problem in details.
Regards
Thomas

Error 0 update while loading master data

Hi,
Iam facing a problem while loading master data.Data has comes to PSA but it getting failed to load into infoobject it is showing the error " error in the 0 update".
Ihave tried for manual update, even though it is showing same problem .masterdata 0material is copy back from production to Quality.presently iam uploading data in quality.can anybody give your valuable suggestions.
Thanks & Regards,
Mahi.

I've a compounding characteristic in this characteristic.
And the master data loading was fine yesterday but today it doesn't work.
When I check with rsrv this characteristic, a dump with message:
Error in ABAP application program.
The current ABAP program "SAPLRRSI" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "GP47HH4A9VROVK98YR0TT9S7TQ5 ", the following syntax error occurred
in the Include "GP47HH4A9VROVK98YR0TT9S7TQ5 " in line 25:
"Field "/BIC/MZCATWRT" is unknown. It is neither in one of the specifie"
"d tables nor defined by a "DATA" statement. "DATA" statement."
So I think something is wrong in this Char.
But what can I do for that?
Thanks a lot for all idea.
Juan

Problem in loading transactional data from to 0MKT_DSO1(ods) to 0MKTG_C01

Hi,
I am trying to load lead transaction data to the standard Crm lead management cube from ODS.There is a problem while loading transaction data from 0MKT_DSO1(ods) to the infocube 0MKTG_C01 as the field 0STATECSYS2(CRM STATUS) is set to 10 in ods -meaning incorrect transaction. This feild is not there in the infocube.
There is a routine in the cube that deletes data records with (0statecsys2) set to 10.
THIS field is not coming in the transaction.
so, where can i see the master data in crm source system? and why is that feild getting set to 10 ?
thanks in advance!

Thanks for the reply..
I have checked the Fact table which shows
1. packet Dimension
2. Time dimension
3. Unit dimension.
I have kept the 0CALDAY as the time characteristics.
Sample data i have loaded from ODS to Cube.
Sample data in ODS.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
I have loaded this data in Cube with Full Upload.
Data in Cube.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
Again i am loading the same data to cube
Data in cube after loading.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
800001___________12/02/2009____15
The data is duplicated and it is not cumulating.
Am i missing anything on this.
Pls help..
Thanks,
Siva.

Error Caller 70" is missing while loading master data

Hi All,
I am facing a Problem while loading master data getting error like "Error Caller 70" is missing" ,there are 4 data packages and in that except one all other with status green .1 data pakage is showing with red color, its update till only PSA .
Please help me out to solving this issue .
Thanks in Advance
Sandhya

Hi,
check the below links
caller 70
Re: Caller 70 error
caller 70
Hope this helps

While loading master data into PSA, the eorror is 'Error from PSA"

Hi All,
While loading master data into PSA, the eorror is 'Error from PSA"
Could you anybody please help in this reagard.
Thanx,
Sridhar.

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

Caller-70 Error while loading master data into infoobject

hi ,
I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
ST22 dump analysis is as below:
Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in
"VALUE_TO_SID_CONVERT_DB".
The main program was "RSMO1_RSM2 ".
Please help as soon as you can..Production problem....
Regards
Rakesh

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

Problem While loading Master data from R/3

Similar Messages

Maybe you are looking for