Problem while loading the data

Hi Gurus,
I am facing aproblem in PSA.Acctually the problem is that when we are  loading the data from R/3 to BI side sold to party errors were occured.I edited that error records and manual update done.But in cube manage i find that trasfore records are only 6 which are edited in PSA and added recordrs are 2651.But in that datapacket total records are 3061.
My cube was rollup also.
pls give my solution.I'll assigne points.
Regards
Roy

Hi Raj,
No need to match  datapacket total records to your target.Because depend on the design records are going to change.
Thnx,
Assign points if useful.

Similar Messages

  • Date problem while loading the data

    Hi Guys,
    When we are extraction the data from the DataSource  0CRM_SALES_ACT_1, it is giving an error for 0calday.
    If the date is greater than 2012, it is giving an error. i.e., it is taking date upto 31.12.2012. If the date is greater than that date is giving an error as "date is later than factory calendar definition".
    In that case we are modifying the date in the PSA and make date less than 2013 and loading the data.
    Even we have done Transfer Global setting at the source system and we checked the factory calendar in SCAL tcode it is setup to 2098.
    Can you please advice how to solve the problem when we are loading the date which is greater than 31.12.2012.
    Thanks in advance
    Jagan

    Hi Jagan,
    In the info package selections tab.
    for 0CALDAY field give to value as 31.12.9999 and try loading you will get all the records
    Regards,
    Venkatesh

  • Error while loading the data from PSA to Data Target

    Hi to all,
         I'm spacing some error while loading the data to data target.
    Error :  Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
    Details:
    Requests (messages): Everything OK
    Extraction (messages): Everything OK
    Transfer (IDocs and TRFC): Errors occurred
          Request IDoc : Application document posted
          Info IDoc 2 : Application document posted
          Info IDoc 1 : Application document posted
          Info IDoc 4 : Application document posted
          Info IDoc 3 : Application document posted
          Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
    Processing (data packet): Errors occurred
          Update PSA ( 2462  Records posted ) : No errors
          Transfer Rules ( 2462  -> 2462  Records ) : No errors
          Update rules ( 2462  -> 2462  Records ) : No errors
          Update ( 0 new / 0 changed ) : Errors occurred
          Processing end : Errors occurred
    I'm totally new to this issue. please help to solve this error.
    Regards,
    Saran

    Hi,
    I think you are facing an invalid character issue.
    This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
    I will add the step by step procedure to edit PSA data and update into target (request based).
    In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
    Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
    Identifying incorrect records.
    System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
    1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
    2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
    3. Then you can go to PSA and filter using the incorrect records based on the particular field.
    4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
    If you want to confirm find the PSA table and search manually."
    Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
    Steps to resolve this
    1. Force the request to red in RSMO > Status tab.
    2. Delete the request from target.
    3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
    4.Edit the record
    5. Save PSA data.
    6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
    Refer how to Modify PSA Data
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
    This should solve your problem for now.
    As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
    RSKC --> type ALL_CAPITAL --> F8 (Execute)
    OR
    Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
    Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
    Refer
    /people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
    /people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
    /people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
    http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
    For adding Other characters
    OSS note #173241 – “Allowed characters in the BW System”
    Thanks,
    JituK
    Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

  • Records was deleted at R/3 sys - getting error while loading the data

    Hi All,
    we are extracting the data from 2LIS_12_VCITM, 2LIS_11_VASCL, 2LIS_11_V_ITM, 2LIS_13_VDITM and 2LIS_11_VAITM into Cube RSD_C03. But one record (Sales Order) was deleted at R/3 system so we getting the error message that Caller 09 contains an error message while loading the data from 2LIS_12_VCITM.
    we have replicate the DataSource and activate Trans rules but no use still getting the same error.
    when we execute the data source  2LIS_12_VCITM at RSA3 with update mode as D (Transfer of the deltas since the last request)getting error message that Errors occurred during the extraction
    and we are getting the zero records at RSA3 for the 2LIS_12_VCITM as update mode as F (Transfer of all requested data)
    And getting shot dump that TSV_TNEW_PAGE_ALLOC_FAILED at BW side.
    Could you kindly suggest me any one how to rectify this error.
    Thanks in Advance,
    Shaliny. M

    hai Lilly
    I activated myself source system  and replicate the my datasource .
    Then activate the update rules for ODS , InfoCube and InfoCube .
    Then i tried to load the data into InfoCube from ODs .
    Again im getting same problem .
    why it is like that
    pls tell me
    rizwan

  • Error 8 while loading the data from the souce system

    Hi Gurus
    Every day we are loading some data from one of our souce systems through process chain
    But today all the loads failed complaining about error 8 while extacting the data
    connection to source system is fine
    we have the problem while loading master data from the same source system
    any solution?
    Thanks in advance

    Hi,
    Check with basis team regarding any patches applied in source system or not ? If yes then replicate all data sources and activate again.
    hope it helps...
    regards,
    Raju

  • Problem while exporting the data from a report to an excel file.

    Hi SAP guru's,
    I have a problem while exporting the data from a report to an excel file.
    The problem is that after exporting, the excel file seems to have some irrelevant characters....I am checking this using SOST transaction..
    Required text (Russian):
    Операции по счету                                    
    № документа     Тип документа     № учетной записи     Дата документа     Валюта     Сумма, вкл. НДС     Срок оплаты     Описание документа
    Current Text :
       ? 5 @ 0 F 8 8  ? >  A G 5 B C                                   
    !   4 > : C       "" 8 ?  4 > : C      !   C G 5 B = > 9  7 0 ? 8 A 8        0 B 0  4 > : C         0 ; N B 0      ! C <       ! @ > :  > ? ; 0 B K        ? 8 A 0 = 8 5  4 > : C
    Can you help me making configuration settings if any?
    Regards,
    Avinash Raju

    Hi Avinash
    To download  such characteres you need to adjust code page to be used during export. You can review SAP note 73606 to identify which code page is required for this language
    Best regards

  • Error while loading the data from text file

    Hi,
    I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
    Can any one please suggest me the solution.

    Possible Solutions
    Make sure that the data source is valid.
    Is a member from each dimension specified correctly in the data source or rules file?
    Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
    Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
    If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
    Does the data source contain extra spaces or tabs?
    Has the updated outline been saved?

  • While loading the data in transaction RSA1 we are getting dump in SCM 5.1

    Hi,
    I am getting runtime error while loading the data in transaction RSA1.
    Runtime error is GETWA_NOT_ASSIGNED associated with program /SAPAPO/CL_PDEM_WORKDAYS.
    Please help me out with this.

    Hi Rahul,
    Check whether sap note 482494 can be applicable to you.

  • Facing a Problem while downloading the data from ALV Grid to Excel Sheet

    Hi Friends,
    Iam facing a problem while downloading the data from ALV Grid to excel sheet. This is working fine in Development server , when comes to Quality and Production servers I have this trouble.
       I have nearly 11 fields in ALV Grid and out of which one is PO number of length 10 , all the ten numbers are visible in the excel sheet if we download it from development server but when we download it from Quality or Production it is showing only 9 numbers.
    Can any one help me out in this case.

    hi...
    if this problems happens dont display the same internal as u finally got.
    just create new internal table without calling any standard data elements and domains... but the new internal table s similar like ur final internal table and move all the values to new int table.
    for eg.
    ur final internal int table for disp,
         data : begin of itab occur 0,
                        matnr like mara-matnr,
                   end of itab.
    create new like this,
               data : begin of itab occur 0,
                        matnr(12) type N,
                   end of itab.

  • TSV_TNEW_PAGE_ALLOC_FAILED error while loading the DATA using DTP

    Hi,
    While loading the data using DTP for 2  DSO's we are gettig the error
    TSV_TNEW_PAGE_ALLOC_FAILED
    can any one kindly help me out regarding the same.
    Thank You,
    Poornima.

    Hi Soundarya,
    Thanks a lot for the reply. But i found that its running fine in development, where as coming to quality its throwing an error. These happened for Two DSO's. In both the transformations i have identified that the Transformation names are different from Development and Quality..
    There are no routines written for them and no select statements have been used
    Can you please suggest me regarding the same.
    Edited by: Poornima Gayatri on Mar 22, 2010 7:00 AM

  • Problem in lsmw while loading the data

    hi,
    I am trying to load the mm data by using batch input in LSMW,when i am trying to load the data views are not populating automatically ,while recording is there any other way to select,kindly give me idea,its urgent issue.
    Thanks,
    Rammohan.

    Hi Rammohan,
    ya its better to use the existing bapi from the list rather than using the batch input recording for the mm data. There is one standard bapi existing, try to use that othewise its very much difficult to do it in case of views with batchinput
    Regards,
    Naveen

  • Error while loading the data

    Hi,
    We are trying to copy data from one cube to another(it's exact copy). There are more than 11 million records so we have used calendar month as filter and divided the data in to many parts.
    While loading the first request to the target cube, it failed resulting in a short dump. I checked in ST22 and it showed "Runtime Errors DBIF_RSQL_SQL_ERROR , Exception CX_SY_OPEN_SQL_DB" and I also found a message "ORA-00060: deadlock detected while waiting for resource" in the description of the Short Dump.
    I found many threads here relevant to this exact issue but the only solution that I could find is to include a delete index and create index process in the chain before and after the data load process to the target cube. In our case, the target cube has no data and this would be the first request to the cube so there is no need to delete index in the first place but still the data load is failing.
    For each load there are 50 data packages and 50k records for each packages. Only one or two packages have failed. Is there any way to recover only these two separatly instead of deleting the whole request and repeating the process.
    If you have encountered a similar issue or if you have any suggestions, Please do help.
    Thanks..

    Hi,
    Can you see which data packages have RED status? Click on the live of the RED data package, and you have to find an ICON with update manually, or go to MENU -> REQUEST -> POST MANUALLY.
    if you are lucky, it helps. Do not forget that this runs in DIALOG process, so don't leave BREAK.POINT in your transformation.
    If you need any help, please let me know.
    (The DEADLOCK problem: change the DTP BATCH setting, because it has problem with paralel loading, and there os a database deadlock. I suggest you to load in one process so: open DTP. after it, go to GOTO menu -> SETTINGS FOR BATCH MANAGER -> NUMBER OF PROCESSES, overwrite with 1. With that, deadlock may not occur.)
    Regards,
    Laszlo

  • BI7.0 Hexdecimal values problem while activating the data in DSO

    Hi Friends,
                     I've got the data upto PSA and i've run DTP also from PSA to DSO, but while activating the data in DSO from New Data Table to Active Data Table, it's giving the error given below:
    Error when assigning SID: Action VAL_SID_CONVERT table
      0DOC_HD_TXT     
    Value '1st disb' (hex. '00310073007400200064006900730062') of          characteristic 0DOC_HD_TXT contains invalid characters
    Process 000037 returned with errors.
                it isn't accepting the values like with numberels and chars together
    ex: 1st disb, 70 cr Gen Hsg.
                   I want the same to be in the report, how these are to be allowed?, i don't want to edit in PSA and there are a lot of values like that i can't edit all those, since there are thousands of records.
    Regards,
    BalajiReddy

    Hi Anil,
                       Thanx for your quick replay, i've allowed ',' in RSKC and i've checked the check box LOWER CASE LETTERS for IO 0DOC_HD_TXT, the problem was almost solved out. What does ',' mean by?
                          Why lower case letter has to be checked only for this IO (0DOC_HD_TXT), not for others? if it is checked, it allows only lower cases, doesn't allow upper cases i think. won't there be any problem? if it is done like that?
            pls tell me the reason, i'm really thankfull for your quick replay
    Regards,
    BalajiReddy

  • Error While loading the data into PSA

    Hi Experts,
           I have already loaded the data into my cube. But it doesn't have values for some fields. So again i modified the data in the flat file and tried to load them into PSA. But while starting the Info Package, I got an error saying that,
    "Check Load from InfoSource    
    Created       YOKYY  on   20.02.2008   12:44:33 
    Check Load from InfoSource , Packet IP_DS_C11
    Please execute the mail for additional information.
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    Pls help me in this......
    With Regards,
    Yokesh.

    Hi,
    After editing the file did you save the file and close it.
    This error may come if your file was open at the time of request.
    Also did you check the file path settings.
    If everything is correct try saving the infopackage once and loading again.
    Thanks,
    JituK

  • Error while loading the data from ODS to InfoCube

    hai
    Im trying to load the data from ODS to InfoCube for particular year .
    But it says that there is a source system problem .
    why it is like that .
    pls tell me
    i ll assing the points
    rizwan

    Hi Rizwan,
    you didn't mention the error message in details. there could be a few places to be checked:
    - check if BW itself source system is active and in tact and reactivate if necessary
    - check if update rule is active and reactivate if necessary
    - check if ODS is active and reactivate if necessary
    Regards,
    Lilly

Maybe you are looking for