Problem while loading windows 7 and dual boot

good evening am getting problems while installing windows 7 and fedora,is this laptop HP 15-R262TU supports only windows 8.1 and it is suppoting dual boot or not? please reply soon
This question was solved.
View Solution.

Hi
Here is the link required for all Windows 7 Drivers for your machine , Once you have installed Windows 7 goto the link and download all drivers that are not installed via Device manager . If you make a list of drivers not installed and then refer to the drivers page and take all the drivers you require .
http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7486447/model/7812714#Z7_30...
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Similar Messages

Problem while loading texts and authorization objects file in RAR

Hi all,
i am getting internet explorer error while loading the texts and authorization objects text files in RAR .actually we uploaded rule file before this,does this step causes any error ?if so how to resolve this error.do i need to remove all rules/risks and then load text and authorization files? is there any shortcut to renove all risks generated in one shot? please reply me soon to resolve this.
Thanks,
Joseph.

Hi Joseph,
Please make sure to convert both the files in UTF-8 encoding format and then try to upload the files again. This should resolve the issue and if not then please paste the logs here.
Regards
Harleen

[SOLVED] RTC and dual booting with Windows 8/8.1

I am planning ahead of installing Arch on a windows 8.1 laptop, and need to understand whether or not the known Windows registry hack to get windows to use UTC for the RTC is still valid for Windows 8/8.1? I have been searching via google and the usual sources of information, but it is not clear to me if there are problems doing this, specifically if arch is dual booted with Windows 8/8.1 rather than older versions of the MS OS. Certainly I have used the technique without any problem in the past when dual booting Windows XP with Arch on several different machines.
Does anyone have personal experience with doing this on a Windows 8 or 8.1 machine and can report here on whether it works successfully or not?
Thanks for any advice.
Last edited by mcloaked (2014-02-11 21:16:21)

Since there were no replies at this point I thought I would just go ahead and implement the registry hack on the Windows 8.1 O/S in the laptop and see if Windows behaves. It appears to be OK, with the displayed time being correct after reboot, and time synchronisation remaining fine with no problems seen in the displayed time, although I won't be able to read the RTC directly until I have completed the Arch install in the coming week or two. I now don't foresee any issues with the time synchronisation between booting Arch and Windows 8.1 so I will mark this as solved.
Since the RTC is now in UTC then normal clock config in Arch using chrony should perform normally once the install is done and the new system set up.
Last edited by mcloaked (2014-02-11 21:17:11)

Arch And Windows 7 Dual Boot On Separate HDD

Hi everyone.
Firstly, a big thank you to everyone for helping me out in my first thread regarding choice of partitions and filesystems.
I went on to install Arch today on my second HDD (160GB). My first HDD has Windows 7 installed on it. (The BIOS shows that the HDD with Win 7 installed is HDD1.)
Arch showed the HDDs as sda and sdb. I was installing on sdb and created my partitions accordingly.
sdb1 --> root (15GB)
sdb2 --> swap (1GB)
sdb3 --> var (10GB)
sdb4 --> home (remaining space)
I had to flag sdb1 as Bootable.
Then I was asked about mountpoints and something about selecting by dev or uuid. I didn't quite understand but selected dev. Then formatted with ext4. Did not add any parameters.
Before proceeding they gave a warning about no /boot partition but I continued anyway.
It was an FTP install and went pretty smoothly. I configured everything exactly as I had read in the guides online and Wiki. GRUB said it configured successfully (I did not make any chnges to it). I had put GRUB on sdb and not on any partition.
As I rebooted, my system did not show the GRUB but went straight on to Windows 7. I went into BIOS and changed my first drive to the 160GB Seagate where I had installed Arch and rebooted. This time GRUB came up without any option to boot Windows 7. When I selected Arch it gave an error and did not boot.
So I'm back on Windows 7 and need help. I'm a noob and did not much understand the solution that I saw on another thread. Since I intend to have the 2 OSs on separate drives and dual boot, what should I do?
Will be very grateful for any help.
Last edited by Ritwik7 (2010-06-06 12:01:31)

Here you go:
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Windows
title Windows
rootnoverify (hd1,0)
makeactive
chainloader +1
# (1) Arch Linux
title Arch Linux
root (hd0,0)
kernel /vmlinuz26 root=/dev/mapper/vghparch-lvroot ro quiet
initrd /kernel26.img
# (2) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz26 root=/dev/mapper/vghparch-lvroot ro
initrd /kernel26-fallback.img
I installed grub on the second hdd and configured the bios so this drive comes first in the boot sequence and as pyther pointed out above the drive where grub is loaded from becomes hd0.
Last edited by Ashren (2010-06-07 18:51:29)

Error With Ubuntu and windows 8 dual boot

I have a levovo x240 and I had Ubuntu and windows 8 dual booted I removed the Ubuntu partition in windows partition modifier and when I restarted my computer it launch "grub rescue> "
How do I boot into windows and stop this problem

Yes, instead of posting in a forum dedicated to type, post in a forum associated with Premiere.
I will move your post for you.
- Dov

Cannot backup Windows 7 (dual-boot) image to external HD (formated as Mac OS Extended)

I cannot backup my Windows 7 (dual-boot) image to my external HD (formated as Mac OS Extended). I installed MacDrive 8.0 hoping to solve the problem but Windows 7 gives me an error when I try to create a backup: "...drive is not formatted as NTFS, cannot use as backup...".
I also tried making an Image of the Windows 7 partition through Disk Utility but was not allowed to do so.
I am not sure where else to go from here. I need to keep my external hard drive formatted as Mac OS Extended but I also need to backup my Windows 7 partition. I only have the single external at the moment. Is there a way to backup my Windows 7 partition?
Thanks

Winclone will backup your Windows partition to a Mac formatted drive.
Just search for Winclone on this forum and on Goggle.

I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, etc. Anybody at Apple listening?

I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, 3. View preferences in windows don't hold, etc. Anybody at Apple listening? Anybody else out there having these kinds of problems?

10.7 was horrible unstable so I waited until 10.7.1 and tried it again. Well I have to say that it is still a defective OS. I am reverting to Snow as we speak from my carbon clone copy.. This is really the worst OSX I have ever used. It gives me random Kernel panics for no reasons, unstable airport and hundreds of small issues that are just not necessary. For instance I can't use QuickTime in Lion to trim a videoclip ( the UI goes mad and the trimslider becomes inoperable and hangs the Player window ) while in Snow it is no problem. Itunes gives me crackling sound when the equalizer is turned on, Graphical glitches in Photoshop, games crashing, Preview.app not working with some pdfs, so I need Adobes reader which I never used before.. It is definately not ripe for mass usage. Might 10.7.2 or 10.7.3 fix it, but not yet.
* and just for the records : the hardware is absoltely ok. Because in Snow it works as it should. ( So many Lion fanbois are talking : "your Ram is defect", defintely NOT. - Lion is defect! ).
Shame on you Apple.
Message was edited by: Sjazbec

Problem while loading data from ODS to infoobject

Hi guys,
I am facing problem while loading data from <b>ODS to infoobject</b>.
If I load data via PSA it works fine but
if I load data without PSA its giving error as Duplicate records.
Do u have any idea why it is so.
Thanks in advance
savio

Hi,
when you load the data via the PSA, what did you select? Serial or Paralel?
If you select serial most likely you don't have duplicates within the same datapackage and your load can go through.
Loading directly in the IObj will happen thefore if you have the same key in two different packages, the "duplicate records" will be raised; you can perhaps flag your IPack with the option "ignore duplicate records" as suggested...
hope this helps...
Olivier.

Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

Please don't double post. Look at your other thread.
If you want to get rid of Windows and the BC partition use the Boot Camp assistant program to remove the Win/BC partition. Don't do it manually with Disk Utility Use the BC A program.

Problem while loading security information (users/roles) from repository

Iview have stopped connecting to our MDM, All repositories, all IViews Very strange
Here is what I see in the logs.... Any ideas? Please if you have seen this before only
Marty
com.sap.mdm.extension.MetadataException: Problem while loading security information (users/roles) from repository 'PORTAL_CUSTOMERS'
at com.sap.mdm.extension.MetadataManager.loadRoleCache(MetadataManager.java:559)
at com.sap.mdm.extension.MetadataManager.internalGetRoleSet(MetadataManager.java:502)
at com.sap.mdm.extension.MetadataManager.getRoleSet(MetadataManager.java:471)
at com.sap.mdm.extension.MetadataManager.createMetadataKey(MetadataManager.java:464)
at com.sap.mdm.extension.MetadataManager.getRepositorySchema(MetadataManager.java:197)
at com.sap.mdm.uwl.MdmUwlConnector.createUserSessionContext(MdmUwlConnector.java:1463)
at com.sap.mdm.uwl.MdmUwlConnector.new_retrieveItems(MdmUwlConnector.java:546)
at com.sap.mdm.uwl.MdmUwlConnector.getItems(MdmUwlConnector.java:129)
Caused by: com.sap.mdm.commands.CommandException: com.sap.mdm.net.ConnectionException: java.io.IOException: Unexpected socket read. Result is -1.
at com.sap.mdm.security.commands.GetUserListCommand.execute(GetUserListCommand.java:72)
at com.sap.mdm.extension.MetadataManager.loadRoleCache(MetadataManager.java:526)
Caused by: com.sap.mdm.net.ConnectionException: java.io.IOException: Unexpected socket read. Result is -1.
at com.sap.mdm.internal.protocol.manual.AbstractProtocolCommand.execute(AbstractProtocolCommand.java:102)
at com.sap.mdm.security.commands.GetUserListCommand.execute(GetUserListCommand.java:69)
at com.sap.mdm.internal.net.DataSocket.receiveData(DataSocket.java:62)
at com.sap.mdm.internal.net.ConnectionImpl.readInt(ConnectionImpl.java:497)
at com.sap.mdm.internal.net.ConnectionImpl.readInt(ConnectionImpl.java:490)
at com.sap.mdm.internal.net.ConnectionImpl.nextMessage(ConnectionImpl.java:629)
at com.sap.mdm.internal.net.ConnectionImpl.receiveMessage(ConnectionImpl.java:572)
at com.sap.mdm.internal.net.ConnectionImpl.send(ConnectionImpl.java:233)
at com.sap.mdm.internal.protocol.manual.AbstractProtocolCommand.execute(AbstractProtocolCommand.java:99)
com.sap.mdm.commands.CommandException: com.sap.mdm.net.ConnectionException: java.net.SocketException: There is no process to read data written to a pipe.

Early this month we upgraded the MDM server to:
MDM Server version: 5.5.63.57
And the portal components:
MDM 5.5 SP06 Technology Patch 3 (Build 5.5.63.57)
MDM 5.5 SP06 Application Patch 3 (Build 5.5.63.57)
MDM 5.5 SP06 Java API Patch 3 (Build 5.5.63.57)
However the issue just began 2 days ago?
We started intgrating MDM Workflow with UWL and assigned Roles and Iviews to the Universal Worklist Configuration
It seems the Iviews work for a while and then after some time everything gives up? Very confounding
And yes we are using standard Iviews (search, Result and detail)
Thanks
Edited by: Marty Monroe on Oct 31, 2008 3:07 PM

Facing problem while loading data into XI

Hi All,
I am facing a peculiar problem while loading data into XI when we load small amount of data say 5-10 records these records gets processed, but when we try to load a bit higher volume say 100-500 which comes out to be around 7 record s per second then the record processing gets stalled. That is it gives a message that "recorded for outbound processing".
So can any body throw some light on it and can tell us why we rare facing such problem and how can we resolve that problem.
Thanks in Advance.
Regards
rahul

Hi rahul,
Deregistering and Registering the Queue is a temporary solution.
The better way to this would be to Tune your Xi system as already mentioned by Vijaya as mentioned in the guide ,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7fdca26e-0601-0010-369d-b3fc87d3a2d9
Regards,
Bhavesh

I have a problem in loading programs And display my me Hazh message (Plase contact itunes support to complete this transaction)

I have a problem in loading programs
And display my me Hazh message
(Plase contact itunes support to complete this transaction)

You need to contact iTunes Support. There is a "Contact Us" link at the bottom right of every page of the forums.
Best of luck.

Problem while loading applet in opera- very urgent please

hi,
I am having problem while loading applet in opera browser. Showing "Applet loading " continuously. I am trying to use URLConnection to read information from applet's own host. I cant find the exact problem what is happening, Since there is no error message in browser Javaconsole.
If anybody have idea on this please help me. I am in great hurry.
Thanks in advance.
Rao. V

hi this is rao,
I inserted a lot of System.out statements throughout applet life cycle. But they are not displaying in java console. I think the problem is in Opera-java settings. Since i am new to the opera environment i cant get right solution.
Please help me if anybody having clear idea on this aspect.
thanks in advance

10)example of errors while loading data and how do u resolve them?

)example of errors while loading data and how do u resolve them?

hai ram reddy this is ramprasad reddy....u can get this type of most commen errors....like below
As the frequent failures and errors , there is no fixed reason for the load to be fail , if you want it for the interview perspective I would answer it in this way.
a) Loads can be failed due to the invalid characters
b) Can be because of the deadlock in the system
c) Can be becuase of previuos load failure , if the load is dependant on other loads
d) Can be because of erreneous records
e) Can be because of RFC connections.....(sol: raise the ticket to BASIS team to provide the connection)
f)can be coz of missing master data.
g)can be coz of no data found in the source system.
h)Time stamp error........(sol: activate the data source and replicate the data source and load)
i)Short dump error.........(sol: delete the request and load once again)
j)Data locking when loading in parallel.
k)ODS activation failures.
l)No SID found........(sol: should load masterdata before transaction data)

I have mic problem while making video and while on loudspeaker its reduce the mic volume alot.

i have mic problem while making video and while on loudspeaker its reduce the mic volume alot. plz help me out

iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Problem while loading windows 7 and dual boot

Similar Messages

Maybe you are looking for