Problem while opening suggested links

I Can't open the links which are suggested to me when I start typing in the address bar.. I can't even open a link by pasting the URL in the address bar and clicking Enter.. the only way of opening links is now by clicking a bookmark or by writing a URL an then clicking the arrow at the end of the address bar.. What is the problem?? I tried uninstalling and then reinstalling firefox.. I have tried several versions including 3,3.5,3.5.5,3.6 and then finally this 4.. but none of them worked!! please help!

Hi FSHW,
would it be possible for you to post the code and the application you want to open? Would be great to have a look at it.
Best Regards
Philipp N.
NIG AE

Similar Messages

Problem while opening a link of a PDF that points to a specific page to another PDF

PDF links whose URIs include backslashes are interpreted by Acrobat Reader browser plug-in as local file-system links even when they are not. This means that a link that points to a specific page number will open the file but not automatically jump to the desired page . In our browser-based viewing tool, this means that the links are perceived as not working.
for example : from IE Browser When we tried to open the link in PDF 1 which has the URL of the 5th section of PDF2 and the URL includes the backslashes then the Specific section of PDF2 is not getting opened . The link just opens the PDF2 first page. This Specific problem does not arrives if we try to open the link through Adobe Reader or if the URL mentioned in the PDF is formed using forwordslashes instead of backslashes.
Regards
Yeshwant

> not sure if i have explained this very well.
You have not.
But tables cells cannot wrap.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"cheers mate" <[email protected]> wrote in
message
news:e7obon$nim$[email protected]..
> lets say i have a table one row deep and 10 columns
wide, and while
> viewing it
> your window may allow only 3 of the first tables at the
top and three on
> the
> next and three the next and finally one on the last.
(the number of boxes
> is
> not an issue)
>
> the way the tables are shown is.
>
> lets say the window is resized to allow 4 boxes in the
top row and so on
> down
> the page till all boxes are shown.
>
> not sure if i have explained this very well.
>
> if you do not understand please ask and i'll create a
few pages to explain
> what i am trying to do.
>
> i have seen this once or twice around some sites, but
this was ages ago
> and
> have no idea what sites so i can not look to see how
they did it.
>
>
> please take a look at this link i have described what i
am trying to do.
>
>
http://pro-freelancers.com/cascadingboxes.htm
>
> Hope someone can help.
>
>
> thanks
>

Problem while opening Bex query on the web

Hello BW experts,
I have a problem while opening Bex query from my SAP Favorites.See below.
When i double click on the query, i get the following page, with the server name KBWS01QX.
But, from RSRT Tcode, select the query > query display as HTML > Click on ABAP Web , click execute as shown below, it is going to the correct URL as in the 2nd screen shot below.
My question is why is it going to the wrong URL when i open it from SAP Favorites menu?
I want it to open the same URL as it opened from RSRT(which is the right one)
What is the Config needed to make it to work from SAP favorites.
Any help would be appreciated.
Thanks alot.
SV

Hello,
Thank you all for your responses.
See below some additional info.
From RSRT, this time I clicked on JAVA WEB, and i get the below URL, which is the same URL i was getting when i executed the query from SAP favorites.
http://kbws01qx.xxxxxxx.com:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCONSUMPTION
Also, i have executed the Function module : RSBB_URL_PREFIX_GET and i get the below values.
It seems that it is trying to connect to Java portal something services may be, but i want it to open in ABAP web only.
Please help.

Problem while opening Excel through OLE

Hi Friends
I am facing a problem while opening an excel file through OLE. it is working fine in SAP ECC 5.0, but the problem is in ECC 6.0.
I am adjusting the cells for auto fit. I have written the code like below.
CALL METHOD OF e_appl 'CELLS' = e_cell.
CALL METHOD OF e_cell 'EntireColumn' = ole_columns .
CALL METHOD OF ole_columns 'AutoFit'.
set property of e_appl 'VISIBLE' = 1.
if I take out the adjustment part it is working fine for this program, rest other programs even if I have this code, they working fine.
When I am executing the statement set property of e_appl 'VISIBLE' = 1. the return code is coming as 2.
Could anybody please help me to overcome this problem.
Thanks
Praveen

In ECC 6.0, if the worksheet is portedcted SAP unable to open that sheet, now we have taken out this option so it is working.

Problem in opening a link in new page

hi all can any one help iam getting problem while clicking on the link it is opening in same window i want to open the link in new window.if it is normal content we can give target but the link is coming in the mailcontent how can i recognize the link thank in advance

i got the solution for this. it is possible with javascript iam checking all the anchar tags in a page and i gave target is "_blank"
the script is
function externalLinks() {
if (!document.getElementsByTagName) return;
var anchors = document.getElementsByTagName("a");
for (var i=0; i<anchors.length; i++) {
var anchor = anchors;
if (anchor.getAttribute("href"))
anchor.target = "_blank";
start the function by <body onload=externalLinks() >

Problem while opening ai cc

hi guys
I'm facing a problem when opening the ai cc on my laptop and the problem is that the ai shuts down immediately while opening it
for some informations : I use windows 8.1 , and my laptop requirements are good enough to open the ai cc
and thx

ifkfhf,
You may try some of the following (you are past 1) and 2).
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Issue while opening Shop Link in New Window

Hi All,
Recently We have upgraded SRM5.0 to 7.0 and now we are using Portal for Front end application. We have configure the SRM appliation in Portal EP 7.0.
Now i can fetch the data from SRM but problem is when i am opening Shop Link ( Employee Self Serviece --> Shopping Area ) in new window then it's navigating to Home Page instead of opening the Shop application.
When i am opening the Shop Link in Content area that time its opening correctly.
Can you please assist us how we can resolve this issue when i am opening Shop link in new window.
Regards,
Rahul Sanas.

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Problem while opening a file

Hi ,
Can anyone give a solution for me ?
I have a problem while using files with PDF.
writer = PdfWriter.getInstance(document,
new FileOutputStrea("c:/ filename.pdf "));
Exception occurs when specified file is already opened.
How can i rectify it?
Here what i want is ... if specified file is already opened then it is close phisically .How can i close a file by using java?
In my example a pdf file is opened . how do i close that pdf file using java program.
Please quickly give response to me .
Thanks in advance.........

Hi ,
Can anyone give a solution for me ?
I have a problem while using files with PDF.
writer = PdfWriter.getInstance(document,
new FileOutputStrea("c:/ filename.pdf "));
Exception occurs when specified file is already opened.
How can i rectify it?
Here what i want is ... if specified file is already opened then it is close phisically .How can i close a file by using java?
In my example a pdf file is opened . how do i close that pdf file using java program.
Please quickly give response to me .
Thanks in advance.........

Problem to open URL link within hx:outputLinkEx

Hello,
I have a problem to open a URL with the following code, I can see that url output string is "www.lalalala.com" , but after I click it, the new opened browser window is point to "http://localhost:9081/.../www.lalalala.com" ??
Can someone help me why?
Thanks a lot!
<odc:bfPanel
                    name="URL" showFinishCancelButton="false">
          <hx:panelBox>
              <hx:outputLinkEx styleClass="outputLinkEx"
                    value="#{pc_UrlWebsite.url}" target="_blank">
                    <h:outputText   value="#{pc_UrlWebsite.url}"></h:outputText>
              </hx:outputLinkEx>
          </hx:panelBox>
       </odc:bfPanel>

External links are links which goes outside your web container root.
Imagine you're sitting in http://example.com/webapp/page.jsf, then the webroot is http://example.com/webapp.
If you specify a link without a protocol (http, https, ftp, file, etc), then the client will always assume that you're linking to a resource in your web container. So when page.jsf links to a resource called "www.google.com", without the protocol, then the client will assume that you're referring to http://example.com/webapp/www.google.com. If you prefix it with a valid protocol, e.g. "http://www.google.com", then the client will assume that you're referring to http://www.google.com.
After all .. In your case this is not applicable. You're using commandlinks instead of outputlinks. Why are you asking this? Which problems are you occurring? Do you want to submit to an external URL or so?

Problem while opening page page in Illustrator

I opened a pdf page in Illustrator to extract the image. Missing font dialog box was not shown while opening the pdf page but junk characters (box-like) appeared in the file.
The font used for these characters is Times New roman composite True type. This font could not be replaced with Times new roman true type font.
Let me know how to avoid the junk characters while opening the pdf page in Illustrator

Junk characters usually means a foreign language unicode problem. Does the file look good in acrobat?
Best advice I can offer is what I used in the past, to save as an image from acrobat. I tried look ing in export to .eps if you coudl convert to outlines, btu could not find anything (screenshto below).

Facing Problem While Opening the Form Builder 10g

Hi Experts,
I am Facing below Error while opening one of the developed forms in the form builder 10g. Operating system of my laptop is Window 7.
Oracle Forms Designer Has stopped Working
Windows can check online for a solution to the problem.
---> Check online for a solution and close the program
----> close the program
Please provide any tips or solutions to resolve above Error.
Thanks in advance

Meher Irk wrote:
Hi Experts,
I am Facing below Error while opening one of the developed forms in the form builder 10g. Operating system of my laptop is Window 7.
Oracle Forms Designer Has stopped Working
Windows can check online for a solution to the problem.
---> Check online for a solution and close the program
----> close the program
Try this..
Open form builder.
Make connection with database.
Now open the form.
Hope this works..

Problem while openning Interactive Form

Hi All,
I am facing an propblem while openning the Interactive PDF. I created an interactive PDF in Adobe LiveCycle Designer v8.0.
The Adobe Reader was 8.1. The form was working well and after quite few days i am got this below message, but the same form was openning well in other systems with adobe reader 9.1 and i updated the reader with 9.1 in my system aslo and i am still getting this message. What would be the problem and kinldy provide a solution for this.
"This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer available. Please contact the author for the original version of this document."
Thanks and Regards,
Chandran S

Hi,
1. Check your Authorization
2. Are you using some other language in adobe form
3. Ask Your Basis team to restart the Server
4. Check if any upgrade needed for your Adobe reader
5. Increase the Virtual Memory of you are System.
By
Parthasarathi

Problem while opening the PDF

Hi All,
Iam having an issue while opening the PDF-Attachment in which iam sending it as attachment to the mail.While opening the PDF iam getting the error that "Aodbe Reader could not open the document because it is either not a supported file type or because the file has been damaged(for example,it was sent as an email attachment and was'nt correctly decoded)".
The function-module "SO_NEW_DOCUMENT_ATT_SEND_API1" is getting use to send the attachment.
First iam converting the internal table data into PDF and then am sending the mail with PDF-attchment.
Thanks,
Asmitha.

Even i had a smilar problem. The reason is perhaps the data in internal table doesnt get converted into PDF corectly. In my case i had to convert into PDF and download on local machine. Attching below code for it.Maybe u can get pointers to your problem.
REPORT sy-repid
       NO STANDARD PAGE HEADING
       LINE-COUNT 74
       LINE-SIZE 200
       MESSAGE-ID zz.
PARAMETERS : pcfile LIKE rlgrap-filename LOWER CASE.
DATA :textlines LIKE tline OCCURS 100 WITH HEADER LINE.
DATA otf LIKE itcoo OCCURS 1000 WITH HEADER LINE.
DATA it_lines LIKE tline OCCURS 100 WITH HEADER LINE.
DATA options LIKE itcpo.
DATA header LIKE thead.
DATA result LIKE itcpp.
DATA: bin_filesize TYPE i.
DATA: filesize TYPE i,
convcount TYPE i,
cancel(1).
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pcfile.
    CALL FUNCTION 'WS_FILENAME_GET'
      EXPORTING
        mask     = ',*.*,*.*.'
      IMPORTING
        filename = pcfile
      EXCEPTIONS
        OTHERS   = 1.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
START-OF-SELECTION.
    DATA : BEGIN OF itab OCCURS 0,
            matnr TYPE mara-matnr,
            END OF itab.
    SELECT matnr FROM mara UP TO 10 ROWS INTO TABLE itab.
    LOOP AT itab.
      textlines-tdformat = '*'.
      textlines-tdline = itab-matnr.       APPEND textlines.
    ENDLOOP.
    options-tdgetotf = 'X'.
    options-tdnoprev = 'X'.
    CALL FUNCTION 'PRINT_TEXT'
      EXPORTING
        dialog                   = ' '
        header                   = header
        OPTIONS                  = options
      IMPORTING
        RESULT                   = RESULT
      tables
        lines                    = textlines
        otfdata                  = otf
      EXCEPTIONS
        canceled                 = 1
        device                   = 2
        form                     = 3
        OPTIONS                  = 4
        unclosed                 = 5
        unknown                  = 6
        format                   = 7
        textformat               = 8
        communication            = 9
        bad_pageformat_for_print = 10
        OTHERS                   = 11.
    IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
        format                = 'PDF'
      IMPORTING
        bin_filesize          = filesize
      TABLES
        otf                   = otf
        lines                 = it_lines
      EXCEPTIONS
        err_conv_not_possible = 1
        err_bad_otf           = 2.
    DATA : g_file TYPE string.
    g_file = pcfile.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        bin_filesize            = bin_filesize
        filename                = g_file
        filetype                = 'BIN'
      TABLES
        data_tab                = it_lines
      EXCEPTIONS
        file_write_error        = 1
        no_batch                = 2
        gui_refuse_filetransfer = 3
        invalid_type            = 4
        no_authority            = 5
        unknown_error           = 6.
Regards,
Mansi

Problem while opening PDF form in ABAP

Hello All,
We are getting error while opening results in trip transaction.The form we are using is standard PDF form.
I did all ADS configuartion.
But while opening the URL Http://Host name:port/AdobeDocumnetservices/config
it is asking me user name & password.I am giving user as ADSUSER.But it is not accepting.
ADSUSER is the user used in the RFC & services in JAVA.
(Java & Abap are in the same server).
Can anyone help me?
Thanks in advance

login to the server & go to
/usr/sap/<SID>/DVEBMGS01/j2ee/admin
run a file
./go
it will open the visual administrator
user id j2ee_admin
password is the master pasword which you gave while installation SAP.
and follow the path and check whether you have the entry or not.
Please make sure for your HTTP destination service configuration.
Visual Admin -> Server -> services -> Destination-> HTTP -> FP_ICF_DATA_<SID>
Do you have this entry?
URL: http://server:port
Authentication type: BASIC
User: ADS_AGENT / corresponds password
also refer to sap installation guide where they have give something for adobe document serveres - post installation steps.
Please award points if helpful.
--Sreejesh

Problem while opening xcelsius dashboard in Infoview

Hi all,
I created an Xcelsius dashboard which contains 3 tabs and in each tab i placed different components. Everything works fine.
I exported it to BO platform and while opening it in Infoview it looks very small. Not even in visible size.
My Qn is how should I enlarge it to view it properly???

Hi Vasu,
Open the xcelsius file and in designer, please click on Fit Canvas to Components which will be available 2 buttons next to Data Manager icon. Once this is done, all your components will be fit in the canvas. You can always click on "+" button next to Data Manager icon, to maximize the canvas size. Once this is done, save the XLF and then export to BOE. Hope this helps you.
Thanks!

Problem while opening suggested links

Similar Messages

Maybe you are looking for