Problem while printing in smartforms

Hi, My Login language is AR and i m trying to print English on the smart form. The string I am trying to print is "JOANNOU & PARASKEVAIDES  (OVERSEAS)  LTD." which is stored in company address details. But in smart form it is printing like ".OVERSEAS LTD JOANNOU & PARASKEVAIDES "
note:  It is printing first half at the left side and the second half at the right side as shown above.
please help me to solve this issue.

Hi,
Here comes that where is the problem exactly. Pls read below thread. There are some SAP note that gives you the idea abt using Arabic language in Smart form..
The sap note 823303 & 940429
[Arabic letters & RTL in Smartform;
Edited by: Lokesh Tarey on May 4, 2010 9:05 AM

Similar Messages

  • Problem while printing in ukraine language using smart form

    Hi All,
    Am facing an issue while printing the quality certificate in Ukraine language. I have created the smartform in English,later I maintained the transalations in Ukraine. I will execute the print program by passing the delivery number in selection screen.
    The problem is in print preview every thing is coming fine in Ukraine language except the ship-to party address,But when I issue the print only the ship-to party address in coming in UK rest all are coming as junk characters. Am using  HELVCYR font. I have tried creating form in UK as well but same result.
    Other Ukraine documents are printed correctly using the same printer.
    Please tell me what could be the problem here?
    Thanks in advance.
    Regards
    harris

    Hi Harikrishna,
                         Which printerdevice you using .Is it supports uk language.Try to findout proper printer device for this.

  • Problem in printing of smartform

    Hi All,
    I have designed a smartform.Everything looks perfect in print preview.But when i take a printout nothing is as per print preview.Fields get positoned anywhere and many fields get overlapped.front and backside of page gets mixed.
    I checked in FormPainter no windows are getting overlapped.Page Format used is DINA4.
    Could anyone please tell me what can be the reason for this and solution to this problem.
    Regards,
    Shital.

    Hi,
    Ya, this may be due to problem in your printer installation or problem with the parameters u r passing to the printer while printing.
    Regards,
    Sankar

  • Problem while printing 132 col. report....

    We have one report of width 132 columns. But when we print this report,
    it prints only upto half width (Approx. upto 70 characters.)
    We are using Reports 6i on Red Hat Linux server.
    I tried to modify report width at developing time. But it is of no
    use.
    Which parameters needs to be changed to solve this problem?
    Thanks...
    Kiran.

    Hello Abid,
    I tried as you suggested. But problem is not solved.
    But when I run this report in Windows environment, it prints ok. i.e. I am getting full width of report. What I notice here that while printing thru Windows, I am geeting 'US STD FANFOLD' paper size . But in Red Hat Linux (Advanced Sever 2.1) I am not getting this page size. SO I think if I have this page size in Red Hat then my problem may get solved. Have you any idea how can we get this page size in Red Hat ?
    Thanks.... Kiran

  • REP-1849: Failed while printing : Problem while printing on network printer

    I am getting this error message while printing the report on Network Printer.
    "REP-1849: Failed while printing"
    Reports Server is not installed on my machine.
    On shared printer, it has no problems.
    Platform is Win2000. Report Builder 6.0.8.11.3
    Plz help !
    Thanks in advance !

    Try the following if your printer is a network printer
    1. Add Printers - select Local Printer
    2. In the Add Printer wizard, select "create a new port" option and select "TCP/IP" as type
    3. Write the IP address of the network printer in the "Add standard TCP/IP Printer Port wizard". The port name becomes IP_<ip addr>. Click Next.
    4. Select the printer and printer type in "Add Printer" wizard.
    5. Select a driver and Write a printer name. This completes the setup. Use this printer name to print from Oracle reports.
    Hope this helps..
    Yogesh
    I am getting this error message while printing the report on Network Printer.
    "REP-1849: Failed while printing"
    Reports Server is not installed on my machine.
    On shared printer, it has no problems.
    Platform is Win2000. Report Builder 6.0.8.11.3
    Plz help !
    Thanks in advance !

  • How to Sent Printer Configurations while Printing in SMARTFORMS for PO?

    Hi,
      I took PO Print Out on LIPI Dot Matrix Printer before 10 days. At that time our Basis Consultant kept Some Configurations for that Printer. After some one changed the Configuration Settings of that Printer. Now we took a print but it is printing differently.
    Is it possible to send printer Configurations while calling PO smartforms in my driver Program so that while taking PO Print Out my Print Out Specific Configurations will set automatically if antbody can change the printer Configurations.
    can anyone suggest how to pass printer configuration through smartform or driver program .

    Thank u

  • Problem while printing through citrix

    Dear Gurus ,
    We are facing the problem during printing through citrix .
    When we print locally without using citrix  were able to get the proper print as it displayed in the spool .
    But When we try to take the printout of  document having say 12 colum , only 10 colums r coming asthe print out .
    Please suggest as the views on this issue are valuable
    Thanks in advance .
    Chirag Kohli .

    Hi
    I am facing same problem
    Please let me know if you get any solution
    Thanks
    Rakesh Patel
    [email protected]

  • Is there any way to check how many lines left while printing a smartform ?

    Hi ,
      <b> I would like to know if there is any way to find the no.of lines or space left in the page before printing more information</b>. Usually this is done be SAP to check whether there is enough space available or not to print a page protected line type in table. 
    While printing SAP checks for availability of enough space. I would like to check it manually.
    Can anyone advice me on this how to achieve please ? Thanks very much in advance.
    Regards,
    Sreethan

    Yep, thats what I mean... Normally you create,
    Table->
    Main Area/Header/Footer->
      Row1->
        Cell->
          Text
      Row2->
        Cell->
        Text
    Try creating     
    Table->
    Main Area/Header/Footer->
      Folder (page protection enabled)
        Row1->
          Cell->
            Text
        Row2->
         Cell->
          Text
    end folder
    Clear?

  • Problem while printing

    I am using adobe acrobat professional 8.1. while printing the printout will be jumbled. For this if i use print as image option an advanced, i will get the correct printout, if i give print as image the file size will be heavier, and printing gets slow. i am using windows xp professional, and thosiba E studio200 printer. please help me. thank u
    vijay

    hi! Krishna Kumar
    Check whether the Print immediately option is checked in Print properties.
    else
    if you have created a new print format for you Program , check whether that format has been Transported to Production.
    Regards,
    Nagulan

  • Page number problem while printing

    We are unable to get the page number while printing from SAP, we are trying to print a word document from SAP and when it prints the page numbers do not appear properly. if we save the document to the desktop and print, it prints properly.
    We print to a Xerox 7345 printer...we have loaded the exact driver, but still does not print. Can anything be done from UNIX side for this.
    the page number appear as 0/9 0/9...where it should appear as 1/9, 2/9..etc..
    Any help is highly appreciated, Hope there are some good Basis guys out here.

    Hi Aakash,
    Is it from report or SAP Script?
    Regards,
    Atish

  • Problem in Printing the Smartform in Duplex

    Dear Experts,
                   I had an issue in printing the Smartform in Duplex Page.
    I had 4 windows in the Smartform, Which i had to print the Terms & Conditions. We have the Pages as
    Page1
    Page2
    Page3
    Page4.
    In my case i had to print the Terms and Conditions at the back side of the Page1. I put the print mode as D for the First Page. and also i change the print settings. Like
    Page1  --> D --> Terms
    Terms --> ' ' --> Page1
    Page2 --> ' ' --> Page1
    Page3 --> ' ' --> Page3
    Page4.--> ' ' --> Page4.
    But unable to print the Terms & Conditions at the back side of Page1. Will you please help me if my query is wrong.
    Thanks in Advance.
    Srini

    why don't you close unanswered, and repost as a question in the form printing forum....probably get better response...

  • Problem while printing smartform in dot matrix printer

    Hi Experts,
    When i am printing smartform using dot matrix printer only the last page prints but all the pages displays in print privew.
    For example suppose there are three pages to be print 1/3, 2/3 , 3/3 , i get all the three pages in print privew as well as when i take its printout in laser printer i get all three pages as print, but when i am using dot matrix printer i get only the last page ie 3/3 as print.
    Regards
    Varun Sharma

    Hai Varun,
    If things are coming properly then its no more ABAP issue.
    Need to check out with the BASIS team along with the IT / hardware department.
    Just try to take print out on a other dotmatrix printer, if its somewhere close to you as usually they are heavy and large in size can't be moved.
    Hope this helps,
    Cheers,
    Suvendu

  • Smartform problem while printing the employee details

    Hi,
    I am creating a smartform to display the employee pay slips as the report.
    the requirement is to display two employee's payslip on the single page.
    Suppose:
    1 ABC
    2. XYZ
    On the same page and so on...
    How do i do it through smartform.... Any hint?

    Hi
    there is an easy way to do that,
    first u need to adapt the size of ur MAIN windows just for 2 registers, inside the MAIN a loop to the table with the data of employee and a template, so write the data there.
    with that, the every 2 register the smartform will pass to another page.
    It is everything on the MAIN windows,
    Regards

  • Problem with printing in SMARTFORM

    Hello,
    I have a problem with a printout. I wrote form in SMARTFORM.
    There is a HP LJ2420 printer in our local network. This printer is my local printer (LP1) and it is defined in SAP (for example S005). When I print this form on LP1 printout is ok. If  I print this form on S005 the same printer prints black belts.
    When I save this printout in .pdf or .html file , there are no black belts.
    Regards
    Ela

    This is related to printer settings. Nothinh to doas far as coding is concerned. Just check the printer settings in SPAD transaction. You can contact your basis team  or your superior.
    Regards,
    Nageswar

  • Font problem while printing russian characters

    Hello,
    I have a weird problem. When I print an exported crystal report document which has been exported by Crystal Reports for Eclipse 2.0 as PDF document, the printout misses a lot of russian characters. This area with the missing characters just stays blank, not even question marks or something similar is shown. It seems that the half of all characters of the document is not shown.
    (But the document does not contain any missing characters when you just open it in Adobe Acrobat. You only see this behaviour when you print it. That's why we didn't recognize this error for a long time because we didn't print it but just opened it with Acrobat Reader)
    I have an original document with russian characters which is saved as docx. When I export this document with MS Word to PDF and print this document, no characters are missing. So it's no printer problem.
    There is a difference in both documents:
    This document, where all characters work, has the following properties set in the font information tab:
    Arial
       type: TrueType
       encoding: Ansi
       original font: ArialMT
       original font type:: TrueType
    The document which has been created with Crystal Reports for Eclipse 2.0 just contains the following data:
    Arial
       type: TrueType
       encoding: included
    (I hope the right translation for this option set is "included" because my version of Adobe Acrobat is a non english version).
    What exactly happened to this document. How can I solve this that russian fonts will be print correctly?
    Regards,
    Markus

    By the way. I create the files in this way:
       private void createFile(String outFileName) {
          try {
             ByteArrayInputStream result = clientDoc.getPrintOutputController().export(ReportExportFormat.PDF);
             File newFile = new File(outFileName);
             FileOutputStream output = new FileOutputStream(newFile);
             int bytesRead = 0;
             byte[] byteArray = new byte[10000];
             while ((bytesRead = result.read(byteArray)) != -1) {
                output.write(byteArray, 0, bytesRead);
             output.flush();
             output.close();
          } catch (Exception e) {
             e.printStackTrace();

Maybe you are looking for