Problem while printing through citrix

Dear Gurus ,
We are facing the problem during printing through citrix .
When we print locally without using citrix were able to get the proper print as it displayed in the spool .
But When we try to take the printout of document having say 12 colum , only 10 colums r coming asthe print out .
Please suggest as the views on this issue are valuable
Thanks in advance .
Chirag Kohli .

Hi
I am facing same problem
Please let me know if you get any solution
Thanks
Rakesh Patel
[email protected]

Similar Messages

My iPad2 getting problem while charging through charging adaptor it's getting on off consist sly please hep me in this regard

My iPad2 getting problem while charging through charging adaptor it's getting on off consist sly please hep me in this regard

My iPad2 getting problem while charging through charging adaptor it's getting on off consist sly please hep me in this regard

Problem with printing through SAP

Hi All,
We have problem with printing, only one person through SAP can only print the documents successfully and the remaining are getting incomplete print output. This is happening only for transactions GD23 and FB03 (FI related transactions). We have tried with removing Saplpd folder and installing Sprint as suggested by SAP from note 894444. Still problem persists. Please suggest me in this regards.
Veerendra Kumar.

Hi Ardhian,
We are using Front end printing and already installed SAP GUI new version i.e. 7.10.
Only one user is able to print the document correctly from SAP, and other are getting incorrect print and getting error message "System cannot print the last 80 columns of the report" on one system.
SAP version we are using is 4.7EE.
Let me know if any more information needed for analysing the issue.
VeerendraKumar.
Edited by: Veerendra Kumar Mutyala on Feb 20, 2009 5:35 AM
Edited by: Veerendra Kumar Mutyala on Feb 20, 2009 5:37 AM

Problem while printing 132 col. report....

We have one report of width 132 columns. But when we print this report,
it prints only upto half width (Approx. upto 70 characters.)
We are using Reports 6i on Red Hat Linux server.
I tried to modify report width at developing time. But it is of no
use.
Which parameters needs to be changed to solve this problem?
Thanks...
Kiran.

Hello Abid,
I tried as you suggested. But problem is not solved.
But when I run this report in Windows environment, it prints ok. i.e. I am getting full width of report. What I notice here that while printing thru Windows, I am geeting 'US STD FANFOLD' paper size . But in Red Hat Linux (Advanced Sever 2.1) I am not getting this page size. SO I think if I have this page size in Red Hat then my problem may get solved. Have you any idea how can we get this page size in Red Hat ?
Thanks.... Kiran

Problem while printing in ukraine language using smart form

Hi All,
Am facing an issue while printing the quality certificate in Ukraine language. I have created the smartform in English,later I maintained the transalations in Ukraine. I will execute the print program by passing the delivery number in selection screen.
The problem is in print preview every thing is coming fine in Ukraine language except the ship-to party address,But when I issue the print only the ship-to party address in coming in UK rest all are coming as junk characters. Am using HELVCYR font. I have tried creating form in UK as well but same result.
Other Ukraine documents are printed correctly using the same printer.
Please tell me what could be the problem here?
Thanks in advance.
Regards
harris

Hi Harikrishna,
Which printerdevice you using .Is it supports uk language.Try to findout proper printer device for this.

REP-1849: Failed while printing : Problem while printing on network printer

I am getting this error message while printing the report on Network Printer.
"REP-1849: Failed while printing"
Reports Server is not installed on my machine.
On shared printer, it has no problems.
Platform is Win2000. Report Builder 6.0.8.11.3
Plz help !
Thanks in advance !

Try the following if your printer is a network printer
1. Add Printers - select Local Printer
2. In the Add Printer wizard, select "create a new port" option and select "TCP/IP" as type
3. Write the IP address of the network printer in the "Add standard TCP/IP Printer Port wizard". The port name becomes IP_<ip addr>. Click Next.
4. Select the printer and printer type in "Add Printer" wizard.
5. Select a driver and Write a printer name. This completes the setup. Use this printer name to print from Oracle reports.
Hope this helps..
Yogesh
I am getting this error message while printing the report on Network Printer.
"REP-1849: Failed while printing"
Reports Server is not installed on my machine.
On shared printer, it has no problems.
Platform is Win2000. Report Builder 6.0.8.11.3
Plz help !
Thanks in advance !

Documents pending does not printing while printing through network

Hi!
Every Body! i've a problem my printer does not printing copu when i tried to print a copy using network.
When i tried to print through USB Cable it work well.
I dont understand how this problem can be resolved.
Kindly Help me.
Printer Model : HP LaserJet M1120n MFP
This question was solved.
View Solution.

Hi,
Looks like the printer is not on the network or the ip address may have changed
Please download and run the HP print scan doctor, it will identify and fix the issue...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-120773-1&cc=us&dlc=en&lc=en...
or you may have to reconfigure the printer back to the network and install the printer drivers back on the computer...
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Problem while printing

I am using adobe acrobat professional 8.1. while printing the printout will be jumbled. For this if i use print as image option an advanced, i will get the correct printout, if i give print as image the file size will be heavier, and printing gets slow. i am using windows xp professional, and thosiba E studio200 printer. please help me. thank u
vijay

hi! Krishna Kumar
Check whether the Print immediately option is checked in Print properties.
else
if you have created a new print format for you Program , check whether that format has been Transported to Production.
Regards,
Nagulan

Page number problem while printing

We are unable to get the page number while printing from SAP, we are trying to print a word document from SAP and when it prints the page numbers do not appear properly. if we save the document to the desktop and print, it prints properly.
We print to a Xerox 7345 printer...we have loaded the exact driver, but still does not print. Can anything be done from UNIX side for this.
the page number appear as 0/9 0/9...where it should appear as 1/9, 2/9..etc..
Any help is highly appreciated, Hope there are some good Basis guys out here.

Hi Aakash,
Is it from report or SAP Script?
Regards,
Atish

Selection of Printer while printing through the ME9F transaction

Dear Team
While printing the Purchase Orders using the print command ME9F the system does not ask for any specific printer, instead the default printer is selected and the print is executed. But in practical several printers are available in the network and I need an option to selct a perticular printer.
Suresh

Hi,
In the condition records or in the message details of the PO we l assign the type of printer like LP01, LP02 and etc but not the printer. Under LP01 we may have more than one printer and similarly under LP02 we may have more than one printer. In such cases how to select a particular printer.
Regards
Suresh

Font problem while printing russian characters

Hello,
I have a weird problem. When I print an exported crystal report document which has been exported by Crystal Reports for Eclipse 2.0 as PDF document, the printout misses a lot of russian characters. This area with the missing characters just stays blank, not even question marks or something similar is shown. It seems that the half of all characters of the document is not shown.
(But the document does not contain any missing characters when you just open it in Adobe Acrobat. You only see this behaviour when you print it. That's why we didn't recognize this error for a long time because we didn't print it but just opened it with Acrobat Reader)
I have an original document with russian characters which is saved as docx. When I export this document with MS Word to PDF and print this document, no characters are missing. So it's no printer problem.
There is a difference in both documents:
This document, where all characters work, has the following properties set in the font information tab:
Arial
   type: TrueType
   encoding: Ansi
   original font: ArialMT
   original font type:: TrueType
The document which has been created with Crystal Reports for Eclipse 2.0 just contains the following data:
Arial
   type: TrueType
   encoding: included
(I hope the right translation for this option set is "included" because my version of Adobe Acrobat is a non english version).
What exactly happened to this document. How can I solve this that russian fonts will be print correctly?
Regards,
Markus

By the way. I create the files in this way:
   private void createFile(String outFileName) {
      try {
         ByteArrayInputStream result = clientDoc.getPrintOutputController().export(ReportExportFormat.PDF);
         File newFile = new File(outFileName);
         FileOutputStream output = new FileOutputStream(newFile);
         int bytesRead = 0;
         byte[] byteArray = new byte[10000];
         while ((bytesRead = result.read(byteArray)) != -1) {
            output.write(byteArray, 0, bytesRead);
         output.flush();
         output.close();
      } catch (Exception e) {
         e.printStackTrace();

Problem with Printing through Deskjet F4288 on Network

Need suggestion to sortout the problem with HP Deskjet F4288 All in one Printer. This printer is installed on Windows XP OS System and when we try to give print on the network through other WinXp OS system then the spooler stopes working on the main system on which this printer is connected.

This sounds like the same issue on another post.
Here is one of the responses from that thread:
"For those who still have this problem, I found the solution on this forum -thanks MP2000 (see http://h30434.www3.hp.com/psg/board/message?board.id=Networking&message.id=839#M839)
Go to the computer that the HP F4280 printer is connected to.
Click on Start --> Printer and Faxes
Right click on HP Deskjet F4280 and select Properties
Click on Advanced tab
Uncheck "Enable advanced printing features"
click OK
And it works!"
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

ACH Payment Advice problem while printing

hi,
I am using Print program rffous_t and custimized form Z_F110_US_AVIS BY COPYING F110_US_AVIS.
My problem is while debugging i am getting the values from the driver program.but in print out i am getting 'XXXXXXXXXXXXXX' for all driver program values.Can any one help me.
answers are rewarded.
thanks and reagrds,
Manik

Hi,
When the check printing prints in more than 1 page,
check should be printed at the last page, so in remaining previous pages
we print void pages with out displaying any values.

Misalignment problem while printing in MP237

I've Pixma MP237 which prints misalignment ,
while some straight line is there it prints like cut and also prints spelling and alphabet like they are broke form half.
So I need help to resolev this problem, so what should I do to make it smooth going?

Hi Harikrishna,
Which printerdevice you using .Is it supports uk language.Try to findout proper printer device for this.

Really weird problem while Print to Video

Hi.
I've tried to fix this problem by searching this forum but I couldn't find any solution so I have no choice but to ask for help.
Basically when I'm trying to Print my NTSC DV project to tape through firewire enabled camcorder, I can see video with weird gray block all over with no sound. Same thing happens when I'm trying to preview the project through my camcorder.
I even exported my project and imported it into imovie hd 6 and tried to export to tape but same result.
My camcorder is Sony HDR-HC5 (HDV) and the setting in both my camera and Final cut pro 6.0.2 is correctly set up.
Strange thing is, when I'm using HDV1080i60 preset in Final cut pro, log and capture works flawlessly, but somehow I can't even choose HDV device under video playback. I can see all the HDV settings but they are all gray and can't select any of them.
I remember being able to print DV project to my camcorder with same settings using Final Cut 5.1.4 so I really can't figure out what is wrong with all these.
Any kind of input would be appreciated.

Just curious. How do you get your computer too see the HVR. I am using I movie HD and it does not see anything. Is there a camera setup procedure? I looked at the vague manual which was no help.
Thanks in Advance
Thom

Problem while printing through citrix

Similar Messages

Maybe you are looking for