Problem while publishing the models - it is taking much time

Hi,
I am facing one issue while publishing the models.Previously when Re-publishing the models in Configurator processing pending publications usually took 3 to 5 minutes per model. Currently it is taking 15-20 minutes per model to process. Please suggest me the possiblities to identify the root cause of the issue.
Thanks in advance.
Regards,
Purushoth

You'll probably want to gather a trace for the Process a Single Publication concurrent request. You can turn this on by selecting ' enable trace' on the program definition. You'll need your dba to review the trace to identify which parts of the program are taking the longest.
If you haven't run CZ Purge for awhile, try running it. Also find out how often stats are gathered for the CZ schema.
Thanks,
Jason

Similar Messages

While saving the Ai file its taking much time

I am using windows 7 and Ai CC, when i am working on files while saving the Ai file its taking much time. I got 4 GB RAM. now i got better system too with ram of 6GB. stillthe Ai is taking much time to save 300 MB file.

Thank you Jdanek.
1. I am saving the file in my local HDD only.
2. Scratch disk is F Drive [100 GB free space], there no data is stored.
3. Even i increased the Virtual memory too.
4. Now I switched off the "Save with PDF compatability" too, No luck!

Problem while publishing the service

Hi,
I have installed the SAP netweaver Trail sP1 Preview JAVA EE server.
I have also installed the Preview _Dev Studio.
The Application server is up and running fine
http://<hostname>:50100/
I followed the
"Web Services Testing and SAP NetWeaver Application Server, Java EE 5 Edition"
arcticle written by Mamoon Yunus.
I could create the web service as mentioned in the document.
But when i try to publich it it fails it gives aerror message "Publishing failed".
One thing which i noticed is the Webservice is try to published on http://<hostname>:50000/ and thats the reason i think the publishing fails.
How can i chage the port number form 50000 to 50100.
What ahsould be steps followed form developer studio
Best Regards
Manoj

Hi Vladimir,
Thanks for the help.
I could test the webservcie with the SOAPSonar tool and it worked fine.
Only one thing i would like to address
is that the p;ublishing of the webservice on the SAP server was very slow.
For almost 3 hours the dialog was showing "publishing.......".
Then finally i cancelled it and i got a message that service was deployed sucessfully.
I had the windows 2003 server m/c with 1GB RAM on whihc both the SAP server and netweaver studio was running.
Can this be the problem of slow publishing
Best Regards
Manoj

Problem while publishing the report in web

Hi all
I need to create a report using 10g report builder and publish it in web.
I downloaded evaluation version of 10g report builder and oracle SOA suite 10.1.3.1.0 and installed in my local system.(Is the any configuration required after installation?)
report builder details are as below:
Report Builder 10.1.2.0.2
ORACLE Server Release 10.1.0.4.2
Oracle Procedure Builder 10.1.2.0.2
Oracle ORACLE PL/SQL V10.1.0.4.2 - Production
Oracle CORE 10.1.0.4.0 Production
Oracle Tools Integration Services 10.1.2.0.2
Oracle Tools Common Area 10.1.2.0.2
Oracle Toolkit 2 for Windows 32-bit platforms 10.1.2.0.2
Resource Object Store 10.1.2.0.2
Oracle Help 10.1.2.0.2
Oracle Sqlmgr 10.1.2.0.2
Oracle Query Builder 10.1.2.0.2 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle ZRC 10.1.2.0.2
Oracle XML Developers Kit 10.1.0.4.2 - Production
Oracle Virtual Graphics System 10.1.2.0.2
Oracle Image 10.1.2.0.2
Oracle Multimedia Widget 10.1.2.0.2
Oracle Tools GUI Utilities 10.1.2.0.2
Now I am able create a report but dont know where to deploy the report so that i can publish it in web.
I read some white papers in net but could not follow the steps.
Plz guide.
Regards,
Satya

Hi Satya,
for testing purposes you can start the OC4J comming with the Developer Suite and call your report in the browser like:
http://<your-machine>:8889/reports/rwservlet?report=<your_module>&destype=cache.....
You can include in <your_module> the path to your module.
Regards
Rainer

Request for the reasons of Query taking much time

Hi,
I have one SQL query.When i execute that query from TOAD it is taking some 120 sec,but the same query when i execute from Forms(Front End) it is taking nearly 5 mints.I don't understand where the problem is.Can any one please help me on this with the resons & solutions(Steps to the overcome).
Regards,
Rao.

Can you do an explain plan of the query in Toad?
And a sql_trace of the form when it executes the query?
If you have dba-rights you can enable sql-trace in the forms session by using:
dbms_system.set_sql_trace_in_session(..sid.., ..serial#.., true);where sid and serial# are the values of the forms session (can be found in v$session).
Toon

Taking much time when trying to Drill a characterstic in the BW Report.

Hi All,
When we are executing the BW report, it is taking nearly 1 to 2 mins then when we are trying to drill down a characterstic it is taking much time nearly 30 mins to 1 hour and througing an error message that,
"An error has occared during loading. Plese look in the upper frame for further information."
I have executed this query in RSRT and cheked the query properties,
this quey is bringing the data directly form Aggregates but some chares are not avalable in the Agrregtes.
So... after execution when we are trying to drill down the chars is taking much time for chars which are not avilable in the Aggregates. For other chars which are avilable in the Aggregates it is taking only 2 to 3 mins only.
How to do the drill down for the chars which are not avilable in the Aggregates with out taking much time and error.
Could you kindly give any solution for this.
Thanks & Regards,
Raju. E

Hi,
The only solution is to include all the char used in the report in the aggregates or this will the issue you will face.
just create a proposal for aggregates before creating any new aggregates as it will give you the idea which one is most used.
Also you should make sure that all the navigation characteristics are part of the aggregates.
Thanks
Ajeet

Discoverer report is taking much time to open

Hi
All the discoverer report are taking much time to open,even query in lov is taking 20 -25 min.s.We have restart the services but on result found.
Please suggest what can be done ,my application is on 12.0.6.
Regards

This topic was discussed many times in the forum before, please see old threads for details and for the docs you need to refer to -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Slow&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

An error occurred while loading the model for the item or data source 'EntityDataSource'.

Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan Kumar

I'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

Getting Problem while publishing Problem while publishing java.lang.IllegalArgumentExcep

getting Problem while publishing Problem while publishing java.lang.IllegalArgumentExcep while deploying persistance with ejb sample application into cloud. can any one please tell me why i am getting this?

Hi Goutham,
I am facing the same issue. Please let me know how you have resolved it.

Experiencing the problems while encoding the barcode with Code 128 font

Hi Tim,
Hope you are doing good.
We are experiencing the problems while encoding the barcode with Code 128 font.we have followed the Oracle BI Publisher Blog i.e Barcoding 102 http://blogs.oracle.com/xmlpublisher/discuss/msgReader$281.
Before applying the encoding Java class we were able to display the barcode but after applying this encoding Java class we are not able to display the barcode.
We are requesting you to help us for encoding the barcode with Code 128 font and read barcode by scanner.
We will appreciate and thankful if anybody help us in this regard
Thanks,
SubbaRao.

Hi Tim,
I am trying to create 128 Barcode, output shows little junk characters. I followed the your "Barcoding 102 instrucitons but no luck. I apprciate your help if you provide some help on this.
http://blogs.oracle.com/xmlpublisher/2006/06/06
1. Created Java class under $JAVA_TOP/oracle/apps/oracle/xdo/template/util/barcoder
2. Registeted and applied the format the barcode to the form field. I will sedn my XML, RTF and Java class, Would you pleae advice me on this
Thanks
Venu

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Problem while exporting the data from a report to an excel file.

Hi SAP guru's,
I have a problem while exporting the data from a report to an excel file.
The problem is that after exporting, the excel file seems to have some irrelevant characters....I am checking this using SOST transaction..
Required text (Russian):
Операции по счету
№ документа     Тип документа     № учетной записи     Дата документа     Валюта     Сумма, вкл. НДС     Срок оплаты     Описание документа
Current Text :
   ? 5 @ 0 F 8 8 ? > A G 5 B C
!   4 > : C       "" 8 ? 4 > : C      !   C G 5 B = > 9 7 0 ? 8 A 8        0 B 0 4 > : C         0 ; N B 0      ! C <       ! @ > : > ? ; 0 B K        ? 8 A 0 = 8 5 4 > : C
Can you help me making configuration settings if any?
Regards,
Avinash Raju

Hi Avinash
To download such characteres you need to adjust code page to be used during export. You can review SAP note 73606 to identify which code page is required for this language
Best regards

While posting the Doc thru GM_CREATE_BUDGET taking to short dump

while posting the Doc thru GM_CREATE_BUDGET taking to short dump
giving the message:-
Runtime Errors         MESSAGE_TYPE_X
Error analysis
    Short text of error message:
    System error during characteristic derivation maintenance
    Long text of error message:
    Technical information about the message:
    Message class....... "ABADR"
    Number.............. 599
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
Trigger Location of Runtime Error
    Program                                 SAPLABADR
    Include                                 LABADRF01
    Row                                     255
    Module type                             (FORM)
    Module Name                             WORK_AREA PUT
225       EXPORTING
226         i_write_to_tabadrx = 'X'
227         i_list_access      = buttons-list_access.
228   ENDIF.
229 * test mode: spool trace results
230   IF NOT debug-print_trace IS INITIAL.
231     CALL FUNCTION 'ABADR_TRACE_WRITE'
232       EXPORTING
233         i_write_to_spool = 'X'
234         i_list_access    = buttons-list_access.
235   ENDIF.
236 ENDFORM.                    "trace--show
237
238 ----
239 *       FORM WORK_AREA_DIR--ADD                                       *
240 ----
241 *       ........                                                      *
242 ----
243 * --- I_IDENTIFIER                                                  *
244 ----
245 FORM work_area--put USING i_identifier TYPE t_identifier
246                           i_work_area TYPE any.
247   DATA: name TYPE t_name.
248   FIELD-SYMBOLS: <l_work_area> TYPE ANY.
249
250   CHECK NOT i_identifier IS INITIAL.
251 * put item to work area
252   READ TABLE <strategy>-tab_func_parameters INTO name
253                          WITH KEY identifier = i_identifier.
254   IF sy-subrc <> 0.
>>>     MESSAGE x599(abadr).256   ENDIF.
257   PERFORM namework_areaassign USING name.
258 * unicode
..........................contd...
Pls help.

Hi Victor,
this is due to the Config issues, just check the config related to the "Settings for Availability Control Ledger" in the Grantee Managment

Getting the following error while creating the model for webdynpro app.

Plugin Name: Web Dynpro Model Editor Services
Plugin ID : com.sap.ide.webdynpro.service.modeleditor
Class :ap.ide.webdynpro.modeleditor.wizards.model. creation.ModelDialog
Method : nextPressed
Exception : org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NoClassDefFoundError)
This is the error i am getting while creating the model for the webdynpro application. Can some one help ?
Thanks & Regards
Lalith

hi
This error occurs mainly due to the reason that particular plugin is not there in the NWDS.
So please try to reinstall the NWDS or try tracing out whether that particular plugin is there or not.
Thank,
kris

Problem while updating the Support Package 17 on my SAP WAS SP9

Hi,
I'm facing problem while updating the Support Package 17 on my SAP WAS SP9
ERROR 2006-10-13 10:23:22
FSL-06002 Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).
Please help me in this regard.....
Thanks in advance...
Satya

Hello gentlemen, I am also having problem with the following running on 64 bit Windows and SQL2005/64 bit. I am erroring in Step 8 'Updating JDBC' driver. I am attempting to update from SP9 to SP18. The WEBAS Jave installed went flawless but I seem to be stuck here. Any help is appreciated...
ERROR 2006-11-22 10:13:57
FSL-06002 Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).

Problem while publishing the models - it is taking much time

Similar Messages

Maybe you are looking for