Problem while 're-posting' a cancelle Invoice with Exchange Rate Difference

Hi Gurus,
We are facing a problem while re-posting an Invoice with Exchange Rate Difference. I say re-posting because this invoice was previously posted and reversed on the same date. Here is the scenario along with the relevant postings:
1)
G/R is posted in September when the exchange rate for dollar was, say, Rs. 49 = 1 USD.
Posting:
Service A/C.....100 USD (Rs. 4900)
     To SR/IR Clearing A/C...100 USD (Rs. 4900)
2)
MIRO is done in October, when the exchange rate was, say, Rs. 48 = 1 USD. Thus, the exchange difference posting was done in the respective accounts.
Posting:
SR/IR Clearing A/C......100 USD (Rs. 4900)
     To Vendor A/C...........90 USD (Rs. 4320)
     To TDS A/C..............10 USD (Rs. 480)
     To Exch. Difference A/C. 0 USD (Rs. 100)
This was the correct entry, however we missed out some TDS codes and thus needed to reverse this entry and repost it.
3)
Now this invoice was reversed (T.Code MIRO) in october itself on exactly the same date on which invoice was created, and it resulted in the following postings:
Vendor A/C......90 USD (Rs. 4320)
TDS A/C.........10 USD (Rs. 480)
     To SR/IR Clearing A/C...100 USD (4800, i.e. 48 * 100, Rs.48 being the exchange rate in october)
4)
Now when we try to post MIRO again, it is posting the following entry:
SR/IR Clearing A/C......97.96 USD (Rs. 4800)
Exch. Difference A/C.....2.04 USD (Rs.    0)
     To Vendor A/C........... 85 USD (Rs. 4080)
     To TDS1 A/C............. 10 USD (Rs. 480)
     To TDS2 A/C............. 5 USD (Rs. 240)
This is a wrong entry. SR/IR clearing A/C should have been debited by 100 USD (Rs. 4900), and the Exch. Rate difference account should have been credited by 0 USD (Rs. 100)
Can someone please help us with this. What the system seems to be doing is, that when the Invoice was reversed, the value that got reversed for SR/IR Clearing A/C was 100 USD but with Rs. 4800 instead of Rs. 4900. Now, when we try to repost the invoice, the system divided this value by the exchange rate prevalent in September, i.e. Rs. 49, thus the resultant value 97.96 USD (i.e. 4800 / 49).
Please help.
Thanks!
Regards,
Angad Nagpal

Solved.
The final entry is correct, as the net result in the G/L balances is the same. For further information please refer to notes 116250 and 46564.
Thanks!
Regards,
Angad Nagpal

Similar Messages

Only reseting the cleared documents with exchange rate differences in FBRA

Hello,
we want only reset the cleared documents . We dont want to reverse the cleard documents. But When we try to do it we get a message Exchage difference are posted do you want to reverse it. Want we want to reset are in Doc.. currency. postings for August.
As i know when we have exchange rate difference we dont get an option only resettng but we get reseting and reversing.
May i know how to slove this situation.
Thank you
Chaithra

HiI
f you set this selection field then the settings in the ERD Setting column for this currency type are no longer relevant. The system calculates and posts exchange rate differences between order-related goods receipts and invoices not just for materials with standard price, but also for:
Materials with moving average price
Account-assigned transactions
Planned delivery costs
The valuation of the inventories or consumption is effectively done at the exchange rate for the goods receipt, and not at the exchange rate of the invoice. When you post the good receipts, the fixed exchange rate from the purchase order is not used, but the translation of the purchase order values to local currency is always done at the posting date of the goods receipt.
If you are using the material ledger with actual costing, the system does not include the posted exchange rate differences at period-end closing in the actual prices of the materials.
Regards
Antony

I am facing problem while i create a xls sheet with some Header.

I am facing problem while i create a xls sheet with some Header.
If i give the hed names as FirstName , LastName its comming fine.
FirstName | LastName
--------------------------|------------------------
But when i specify a string like New"Deal , New"approach .
= "New"Deal " | =" New"approach" .
--------------------------|------------------------
Problem is:
It's adding = sign in front of the header name.
I dont want that = to be in front of the headername.
//rep.addColumn((String) itr.next());
The above code is used to add the header name to the xls sheet.
The argument will come as New"Deal
But after seeing xls it has become ="New"Deal "
Edited by: SUNJava2008NY on Jun 12, 2008 11:38 PM

What is the tree structure created for the property of the componentB?
Can you try the below code in your componentB jsp and check whether you are getting the property value
Resource resource = slingRequest.getResource();
String description = ((String) ResourceUtil.getValueMap(resource).get(
"./description", String.class));

Exchange rate difference while posting ME21N MIGO and MIRO

Hi All,
I am facing one problem with exchange rate type between M and EURX and EURX is maintanined in the SPRO>SAP Netweaver>General Settings>currencies>Check Exchange rate types
EXRT : EURX
Usage    : EMU Reg,fixed
Ref.Curr    : EUR
Buy.ra.at
Sall .Rat.At
Inv
EMU   :X
FIXED
Scenario:
Company(USD) is maintaning Exchange rate type: M and no exchange rates are maintained for USD:EUR or EUR:USD.
Eur is maintaing in Exchange rate type EURX.
1) PO (ME21N) is posting for the Vendor on posting date 01/01/2008. Transaction currency is EUR and company code currency is USD and Quantity : 25000
--> Exchange rate 'M' is not maintained for EUR and values are picking from the EURX Type. In the PO, Exchange rate is picking correctly from the EURX table entries on 01/01/2008.
2) MIGO: GR is posted on 01/25/2008 and with 15000 Quantity. Exchange rate is getting currecly from the table on 01/25/2008.
3) MIRO: IR is posted on 02/15/2008 and Vendor Account is picking correct exchange rate from the table but GR/IR account is caluculations EUR:USD is differntly .
Note: It is not GR based IR.
Ex:
PK AC                DESCRIPTION                    Tran Curr (EUR)    Local Curr USD
31 5004789     Vendor Account                       24,718.48-            38,777.12- USD
86 2525000      A/P-GR/IR NON-INV                24,718.48            38,883.73 USD
91 6584785      SERV-OTHER O/S                    0.00                 106.61- USD
Here GR/IR account is cal dirrently.
4) Credit Memo posted against IR on 03/25/2008. Exchange rate is given while posting CM same as Invoice. But system rate is different. Here also how the GR/IR is calculating is question is it not taking from Table or from any other rate types . Same problem like IR for GR/IR account.
Entry is posted like
PK ACC         Description                            Tran curr(EUR) Local curr(USD)
21 5004789     Vendor                                   24,718.48        38,777.13 USD
96 2525000     /P-GR/IR NON-INV                   24,718.48-      38,892.22- USD
81 6584785     SERV-OTHER O/S                     0.00            115.09 USD
This problem is same like GR and also SPL document is posting differenly for ZG and ZL ledger.
ZL ledger is posting same like Accounting CM document ZG is posting with the different amount . This different amount is nothing but the exchange rate as per the posting date 03/25/2008. Exchange rate on 03/25/2008 is differe from IR date 02/15/2008 .
ZL ledger is calculating based on the 02/15/2008 date and ZG ledger is calculating based on the 03/25/2008 . Difference between Exchange rate entered in the CM and 03/25/2008 table entry rate is showing exchange rate difference field in the Addtional field in the document display.
Thanks in Advance.

Dear Friends,
Thanks for your helpful answers, actually we are in big export business. So we have to clear 100s of invoice lines with payments at one go, (which obviously being booked at different dates) so it would be very difficult for the user to go one by one invoice.
My concern is, why system does not calculate exchange rate difference based on actual documents, i.e. Invoice to payments only. I think there might be some configuration needed to implement this functionality.
Please help.
Regards

Post exchange rate differences to separate account on invoice verification

Dear expert,
I'm facing a problem and need your guidance related to exchange rate differences between Goods Receipt and Invoice verification caused by time differences
My company buy an asset using purchase order with account assignment.
As an example:
Asset price on PO      : 100 USD
On Good receipt (Exchange rate 1 USD = 9,000 Rp)
Journal created
Asset                             900,000 Rp
     GR/IR Clearing                900,000 Rp
On Invoice verification (Exchange rate 1 USD = 10,000 Rp)
Journal created
GR/IR Clearing                  900,000 Rp
Asset                               100,000 Rp (Exchange rate differences)
    Vendor                             1,000,000 Rp
My Company wants to put "Exchange rate differences" into separate account (Gain/Loss realized account) instead throw it on asset because asset value would be change. How make it happend?
I already try to configure KDM (Exchange rate differences) and OB09 and still exchange rate differences posted into asset

Hi,
Check config in transaction code Oba1 and Obyc. check posting G/L account of PO (KBS), n try to change in KDR Class.
Regards
Sanjeet Kumar

"Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa K

Hi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin

Invoice verification----exchange rate problem

Dear All.
We use expense Purchase order. When PO do goods receipts, the debit account is assigned to the expense account through account assignment category. The accounting process is as follows:
But when the purchase orders currency is foreign currency ,when the exchange rate at the time of the good receipt is differ from the exchange rate at the time of the inovic receipt.there exist exchange rate difference. Currently the system process as follows:
Do good receipts:(exchange rate: usd/rmb = 7.75).
Dr: expense account   usd 100 (rmb 775)
Cr: GR/IR         usd. 100 (rmb 775)
Do invoice receipts:(exchange rate: usd/rmb =8).
DR: GR/IR            usd 96.875 (rmb 775)
   Expense account   usd 3.125 (rmb 25)
CR: AP-vendor        usd 100 (rmb 800)
Now I have a problem.:How I should configure in order to the exchange rate difference(RMB25) can be into exchange rate account not the original expense account.

Define Auto posting for exchange rate difference : OBA1.
Anyway, u should tick GR-non valuated option for expense PO then this problem will not be occurred.
Rgds.

Problem with exchange rate GBP/EUR

Hi everyone,
I have an issue regarding 2 documents that have been posted the same date (31.05.2011) but with different exchange rates.
The first doc is type ZP, posted with exchange rate GBP/EUR=0,88XXX (entry date: 26.05.2011, T.Code: F110)
The second one is type BK, posted with exchange rate GBP/EUR=0,87XXX (entry date: 01.06.2011, T.Code: FB01)
Both documents use the same exchange rate type EURX.
I checked in OBA7, there is no default value for the field "Exchange rate type for foreign currency docs" in both cases.
Do you have any idea how to solve this problem?
Thanks in advance,
Soumaya

Hi,
If the exchange rate is maintained in OB08 once a month, and in the meanwhile, if you are trying to post any transaction with foreign currency, the system would pick the last available/maintained rate in the table. For Eg: if the rate is maintained upto 30.04.2011 with 0,88XXX and if you have made a document with ZP with posting date as 31.05.11, the system would pick the rate of 30.04.2011 only as there is no rate maintained as on 31.05.11 on the date of transaction. And later, if you would have maintained the exchange rates for the entire month for the individual day of May, and when you processed a document type BK, the system would have picked the actual rate maintained in OB08 as on 31.05.11 ie 0,87XXX. Hence may be the difference.
Please check whether the above was the scenario with you (by referring to the changes option referred by the experts).
Regards
Hari

FM exchange rate differences during the invoice posting

Hello Experts,
We are working in a public project and we are facing the following:
Due to the exchange rate an invoice is bigger in local amount (EUR) than the PO. In other project, we were moving that difference to another P&L account out of budget. However, here in this project, due to the legal requirements all amount of the budget has to consume budget. Could you help me to resolve this isssue please?
Thanks in advance.
Regards.
Ahmed.

Hi,
Then you need to change the exchange rate based on your LIV posting date.
Check in OB08 with exchange rate type "M" , as when ever the difference in PO and Invoice you need to ask the finance team to change exchange rate as per date on which you receive the Invoice so the posting is done as per the vendor invoice exchange rate.
Do refer the below KBA which explains you in detail how the exchange rate works during MIRO.
KBA: 1700942 - Exchange rate cannot be changed as changing the posting date during logistics invoice verification

No exchange rate difference at Invoice Receipt for PO with account assignme

Hi all,
I have a PO with account assignment "K" postinged to G/L account XYZ.
In OBYC, the MM exchange rate difference (KDM) account is set to ABC.
The exchange rate between GR and IR is different.
I expect there should be an exchange rate difference posting to ABC, but instead it's posted to the GL account in the PO, i.e. XYZ.
Do you know what is missing?
Many thanks.
Manlee

Hi
Have you checked if note 980402 is in? We found on a customer system that even though this note was in some settings were still missing which SAP support inserted as follows (per point 49 of the note):
49. Use transaction SM31 to add the following entries to the table T169A.
BUSTW CNT02 VORSL FELDN FELDN_ALT BUZID
RE02 03 KDM KRDIF P
RE10 03 KDM KRDIF P
RE11 03 KDM KRDIF P
RE13 03 KDM KRDIF P
RE21 09 KDM KRDIF P
RE22 10 KDM KRDIF P
After this correct the system is able to post to GL account defined in KDM/KDF ( I forget now which one it used). Note that this assumes the flagg CCCUR is set to activate this functionality. This will effectively override the fixed flag in the PO.

F-28 Exchange Rate Difference Account with a zero posting

Hi SAP Gurus,
When I try to post an incoming payment, even though there are no exchange rate differences, the system post to exchange rate difference account. How to configure the system to stop displaying the exchange rate difference account when the difference is zero.
Regards,
Siva

Dear Siva,
I dont think that the system will post to exchange rate difference account if there is no difference. Probably you are seeing the doucment in the foreign currency. Try to simulate the entry and on the simulated screen, click on the "Display currency" tab on the top of the entry. That will show the simulated entry in the local currency. In the local currency, there may be some difference.
Check it and if useful, assign points.
Regards
Venkatesh

Exchange Rate Difference Posting

Dear Gurus,
I am facing atypical scenario in Production and development Clients.While clearing open items for a BanlK GL (USD Currency) in production there is no exchange differences being calculated by the syste.There is difference in Exchange rates between the original document and the clearing document.
But for the same GL in Development I am getting Posting to Account maintained in KDB Key.
I would like to know what can lead to difference in scenario that in one case system is calculating difference and posting and in the other case no.
Please help.
Regards
Raju

Dear All,
Let me elaborate the scenarion in more deatil:
We post Foreign Currency Invoice LIV--MIRO say rate is 41 USD/INR
For payment F110 No Exg rate differences is selected in FBZP--So no Exchange Rate Difference is posted for payment.
Now for clearing the bank Sub account Entry posted by APP user input LIV Exg rate in past and systen allowed to clear with no Exg rate Differ.This is OK.
Now when user try to clear same account with same entry system is issue msg like No Exg Rate diss account maned.I tried to clear th GL document with both LIV and APP exchage rate its strange that is each case system expects Exchange rate diff account.
I maintained in FBKP KDB in development client but then Exg Rate diff is getting posted which is not the requirement.
Can any body please help.
Regards
Raju

Exchange rate differences not posted in paralel currency

Hi gurus,
I have a difficult one. I have the followign situation:
1)     We are using CLP for Local Currency (pesos chilenos)
2)     We are using USD for Local 2 Currency (group)
3)             We have implemented the Material Ledger (USD currency)
We have a problem when we post an Invoice (trx MIRO) with different date of the good recive. The currency of the purchase order is the same as the local currency (pesos chilenos CLP).
The problem is that the posting in the paralel currency does not post the Exchange Difference between the GR and the IV, instead the posting is with charge to the u201Cprice differenceu201D.
Does any body know if it is possible to post this difference as "Exchange rate difference?.
Regards,
Santiago

Hi,
Thanks Shaubhikg. This OSS notes describes about how the closing entries takes care of the both price and exchange differences of the material procured and production variances. But still my answer is unanswered.
My worry ts that since the exchange differences were captured in accounts of KDM but not seen when I see the material in CKM3. Any more inputs from you or from other fellow brethern!
Regards,

Invoice Verification - Exchage Rate Difference

Hello everyone,
We have a problem with the determination of the exchanges differences between GR - Good Receipt and IV - Invoice Verification.
We would like to post these exchange rate differences in a particular account (included in TC OBYC transaction KDM), but the system automatically posts the difference in material cost account (the same account of the material itself).
In our system we manage consumable and not stock materials (not inventories).
Are there any solution related to MIRO TCode? Can we manage:
- automatically the Account for the exchange rate differences or
- post manually the difference in G/L Account section
Please could you suggest us a solution for the problem?
Thanks.
Best regards
GFV

In SPRO check the settings in the following node :
Materials Management->Logistics Invoice verification->Incoming Invoice->Configure How exchange rate differences are treated.
Here there are 3 options :
1. The exchange rate differences will be calculated from the difference between the exchange rate at the time of the goods receipt and the exchange rate at the time of the invoice receipt.
2. The exchange rate differences will be calculated from the difference between the exchange rate at the time of the invoice receipt and an assumed exchange rate that is valid for a specific amount of time, such as a year or a season.
3.No exchange rate differences will be calculated. Instead, differences from exchange rate variations will be considered as price differences and posted to a price difference account.
If you select 1,2, then Exchange rate differences will be posted to the KDM gl account.
If you select 3, then It will be posted to Price difference

Exchange rate difference not getting posted to KDM account during MIGO/MIRO

Hello Gurus,
I have a purchase order with many line items. For some of the line items, the exchagne rate difference between the date of MIGO and the date of MIGO is taken to the KDM account. But for some other line items, it is not being taken the KDM. For such line items, the value of the GR/IR account in the local currency is different from MIGO to MIRO. Due to this, the GR/IR clearing is not happening automatically.
Do you have any idea, why the system is not taking the different to KDM for some line items and taking it correctly to KDM for others.
The only difference that I noticed between these 2 line items was
In case where the KDM account is determined, the GR was done for only one line item
In case where the KDM was not determined, the GR was done for more than one line item.
Thanks in advance for your replies
Thanks and Regards
Venkatesh

Hi Venkatesh,
I suspect that in your system may be the setting in OMRW is not activated. If the CCurr indicator is not activated for respective company code. Please refer to the information from note 980402 :
After you implement this note, you can use Customizing transaction OMRW to make settings for the new logic for each company code and each currency (the first local currency and two other material ledger currencies, if the material ledger is active). If the CCCurr indicator (V_169P_PK-KDHW) is set, this activates a new logic for calculating the exchange rate difference (KDM amount) in the company code currency (first local currency). As a result, the system also generates KDM lines for purchase orders with account assignment and for purchase orders with MAP materials in inventory management and in invoice verification if required. If the material ledger (ML) is active, you can set a corresponding indicator for additional ML currencies.Bear in mind that the system performs a 1:1 cancellation for the KDM line in the cancellation transactions.
If the indicator is not activated, then the new logic for calculating the exchange rate difference is not active.
I hope this helps.
Regards
Ravinagh Boni

Problem while 're-posting' a cancelle Invoice with Exchange Rate Difference

Similar Messages

Maybe you are looking for