Problem while recording script using Open script.

Installaled OpenScript 12.4,When I try to record a script getting the following error.
Cannot get a connection from the browser helper after 15 secounds.Do you want to continue
Using the thread available in the portal for the above issue followed the below steps
1). CLOSE OpenScript and all browser instances IE & FireFox
2). Run C:\OracleATS\OpenScript\UninstallBrowserHelpers
- Open Command Prompt, navigate to the OpenScript Install directory
(i.e.) cd C:\OracleATS\OpenScript
-Type: UninstallBrowserHelpers and hit Enter.
3). DELETEd the directory C:\OracleATS\OpenScript\Oracle IE toolBar
4). Run the script C:\OracleATS\OpenScript\InstallBrowserHelpers
Getting the following error
WebDom Browser Helper installation failed
Cannot save multiuser execution setting for Chrome plugin in registry under Key: :HKLM\software\MozillaPlugins\@oracle.com/npOPenscriptPlugin"
Environment: IE8
OATS:-12.4.0.2.129

Run the files as "Administrator" did the trick for me. Other wise you don't have the permission to write in the registry.
Kind Regards,
Van Aerschot Christel

Similar Messages

I have met problem while running script

i have met problem while running script catalog.sql in oracle 10g r2 , while running it came out from the Database and then i can't get into the database please help ..
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> @C:\oracle\product\10.2.0\db_1\RDBMS\ADMIN\catproc.sql
DOC>######################################################################
DOC>######################################################################
DOC> The following PL/SQL block will cause an ORA-20000 error and
DOC> terminate the current SQLPLUS session if the user is not SYS.
DOC> Disconnect and reconnect with AS SYSDBA.
DOC>######################################################################
DOC>######################################################################
DOC>#
DECLARE
ERROR at line 1:
ORA-01012: not logged on
Disconnected

You should post it to the Database forum.....
Greetings...
Sim

Stereo Audio Record problem (While recording video as well)

Hi,
I just just bought Sony Xperia C3 dual yesterday. I'm having problem with audio recording. I installed the Sony audio recorder from Google play store but while recording in stereo mode with it the gain suddenly drops after 1/2 second(s). Same problem while recording a video with stock camera app as well, video quality is fine but the audio with it is,just worst. Tried third party app like regorge pro but faced the same problem. Tried disabling the AGC with it, but no good. Recording in mono mode just works fine and I get clear record.
Any solution?
Thanks.

@uliwooly This one i recorded today morning. The audio starts good & clear at the begining but just after one second it drops & then you can hear the bus engine sounds like waterfall. Here is the youtube link https://www.youtube.com/watch?v=5H1jNxyYMlw Here's another video uploaded by a review site with the same problem https://www.youtube.com/watch?v=z3vKwydfN6U & more from youtube https://www.youtube.com/watch?v=-GLLj2ommP4 then i used a third party audio recorder with mic switch option https://www.youtube.com/watch?v=D6d4uAEZFRE as usual with the rear mic the gain suddenly drops after second & you can hear some weird sounds like a "movie bomb" sound at 00:04, "rattle snake" sound at 00:05 & 00:12 & with the front mic starts at 00:17 you can hear the difference. It's mono but so clear & sharp. Finally, as i dont have the mic swith option while recording video, all videos i record will have the same problem. This is definitely not the typical "sony" thing to carry on.

How to fix the delay problem while recording? Can't set the Latency to 0. Win7, CS6,Realtek,C03u Mic

I am using Win7, with CS6, Realtek soundcard and Samson C03U microphone.
There is a problem that's really been bothering me. When I record songs the recorded audio always comes 0.1 seconds after where it's supposed to be and I need to fix the problem every time. How to fix the delay problem while recording? I can't set the Latency to zero. The minimum is 30ms and I still get an obvious delay.
I saw some previous discussions saying that installing ASIO would help. Is it gonna work on my PC?
Thank you in advance guys.

You probably should look at a more 'serious' audio interface rather than the Realtek
Yes ASIO drivers are the way to go
If you want zero latency you need to monitor via your audio hardware (hence the 'serious' audio interface suggestion)
There are a heap of reasonable audio interfaces which will do the job for you that are pretty inexpensive and I'm sure that someone will jump in with a suggestion

Battery problem while recording videos.

I got my ipod touch 5 1 month ago. I got a problem while recording videos. The battery was around 40 percent, but after I recorded a video for about 1-2 minutes. The 20% was popup, then it turned off automatically. While I turn on it, the battery will be about 30 percent. It happened several times. Is this normal?
Does anyone have the same problem?
Thanks!

Hi,
Please refer the below link...
http://www.sapfans.com/forums/viewtopic.php?f=27&t=20842
Kuber

Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found

We have a SOAP to PROXY scenario Which is in Production.
We keep getting the Error:
" Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found on host XXXXXX, ProgId =AI_RUNTIME_XXX.
We are using Standard Receiver Determination with single receiver without any condition. And no mapping being used in interface determination.
What are all the possible situation where we face such as this issue in Production.

Please check the SAP note
# 1706936 - messages fails with error java.lang.RuntimeException Bean SMPP_CALL_JAVA_RUNTIME3 not found
1944248 - PI unstable due to JCO_SYSTEM_FAILURE mapping issues

I'm having a problem while recording a video

'm having a problem while recording a video
When the memory card and the highest quality ..
Stop and is working
I recorded video works normally on the memory card.

Nokia C5-00 5MP

Problem while creating script form - lang EN is not available in client 800

Hi friends,
I getting a problem while creating a script form in SE71.
if I give the name of the script (zform1) and clicked on create then its giving an information message like " Form ZFORM1 language EN is not available in client 800".
But if I use this form in the abap program its giving stop message "Form ZFORM1 language EN is not active and has no errors" and the control is coming out of the program.
What could be the problem and how to solve it friends . Please help me.
Thanks
-Hima

Hi There,,
By default all the forms will be there in client 100, if you are using the exisiting form and making a Z copy of the same,, then first you will have to copy from the client 100 to 800.
If you are creating the form right from the scratch,, you will that message,,but need now worry about that..
go head and create the Zform, don't forget to activate the form, before calling in the driver program.
In the driver program,, call the function modules to invoke the form and activate the driver program as well. then you are all set/
Thanks-
Rahul

Change of sign while extracting data using Open hub

Hello All,
We are extracting data from Info cube to a file in the application server using Open hub.
While extracting data, if there is any negative value for the key figure, negative sign is appending on the right side of the value(Eg: "123.67-"), which is the standard behaviour but I want the sign to be on the left side of the value (Eg: "-123.67") while extracting to the file at application server.
Could any one please let me know if there is any setting to do this change ?
Thanks in advance

Hi,
Changing the SIGN position from one side of the NUMBER to the other side can happen in following ways.
1) After the file is place in the application server. Deploy a OS SCRIPT file (for .csv) for obtaining the required changes to the required COLUMN [Basis team will have more idea on this]
2)This is time consuming idea. well deploy a routine at the Open hub -Infospoke level.
Regards

Pause button problem while recording audio

Someone talked about that problem on another post but I think
that problem deserve a post for it...
We have a probleme when using the pause button while
recording audio on a slide.
If we hit the pause button, it completely deletes all
previous recording in the slide.
If someone have a long text to read for a slide he cannot
take a break and think if everything is ok. Our clients are
disappointed and calls this function.
Do you have an idea when that problem will be solved ?
Thank

Hi Edji, I could not agree more. We reported this to Adobe
months ago and it has been acknowledged, but no information will be
made availlable about any fix release date. We have over 500 staff
users making recordings using Presenter and have trained the
majority on version 6. Imagine the number of supports calls we have
had to deal with when suddenly the pause button deletes all
previous slide recordings in version 7.
Depsite many attampts to get a resolution for this we have
had nothing aside from the suggestion above which certainly does
not fix the issue. It is a significant bug in the program that has
caused us endless hours of support work.
We are quite dissappointed at present with the lack of
reponse to the need for a fix and are currently evaluating a number
of other products.
Pityful but true.

Problem while Creating BOM using LSMW Direct Input

Hi all ,
I am trying to create the BOM Using LSMW Direct Input Method .
I am getting problem at step 9 that is Read Data.
It is able to read the values from header and item files .
but it is not able to write , so the Written is 0 always .
I put the field names first in the flat file and correcponding values below it with tab delimited.
Please let me know where the Problem would be.... I am trying this from long time ..
Regards ,
Raj

hi ,
Yes i am specify files i am attaching 2 files .
ones is header and the other is line item data .
my strucure is :
Hi ,
I am still getting problem while for writing the records after reading the data .....
my header structure :
STYPE
MATNR
WERKS
SELAL
STLAN
DATUV
ZTEXT
my item structure :
STYPE
MATNR
WERKS
SELAL
POSTP
MENGE
my header data :
STYPE     MATNR     WERKS     SELAL     STLAN     DATUV     ZTEXT
1     388     0110     20     1     06.01.2009     SAMPLE ZTEXT
my item data :
STYPE     MATNR1     WERKS     SELAL     POSTP     MENGE
1     388     0110     20     N     1234
1     382     0110     20     N     12345
Above text files are delimited by tabulator.
Please guide me . The files are reading but unable to write .....
Regards,
Raj

Problem while trying to use canon lbp 3050 help me please

Dear all,
I have a problem while using my Canon LBP 3050 printer for my Mac OS X ver 10.6.8
I already install the programme and add new printer into my system preferences , there is a connection to the printer Canon LBP 3050 and the programme installation is working, I think because there is no warning "unsuccesfully installment" .
But when I started to print , no respon at all but the printer status monitor showed that my printing job has been done. no pending works there.
so can you help me to solve this problem?
thank you in advance

Thanks for your respons.
I tried your suggestion and I relieve that it works. thanks.
but… there is another problem again …
why the result of the printing is just the up side. so the bottom side disappear. I already make sure that the ink is new.
I try to put it off and try again and again and… the result is still the same. print the up side only (just the first line from the whole document).
this is the driver version : 3.30
Here is the driver that I downloaded
http://pdisp01.c-wss.com/gdl/WWUFORedirectTarget.do?id=MDkwMDAwNzcyMjEw&cmp=ACB〈 =EN
i think this one is the new one , isn't it?
I'm waiting for your respon again...
thanks a lot

Problem building record set using Dreamweaver CS6 Cloud Product

I am having a problem building a Results Page using Dreamweaver CS6. I have followed all the steps described in Dreamweaver/Build Search and Results Page Article (multiple times). It seems that when I save the Results page it does not copy the php used to build the dynamic table. In fact when I view the source, I do not see any php code.
Additionally, when I attempt to bind the record set, it also does not accept the Default Value(s). Enstead it gives me a list of all data in the colum(s) chosen for the record set (using Where..LIKE..variable definition).
Any suggestions?
Regards,
Norv

Yes, I will be glad to go through each step. I will also provide code.
Step 1: Built the Search Page by adding Form into exisitng htm page. Used Insert> Form>Form to insert Form area. Then added three (3) text fields using Text Icon from the Form Menu Bar (Classic View).
Step 2: Added a Submit and Reset Button to the Search Page. Again used the Form Menu Bar to create the Buttons.
Step 3: Selecte the <form> tag at bottom of Document Window to point Form to the Results Page (using the Action Box.
Saved page and then began building the Results Page using an existing htm page. Saved the Results Page as a .php document.
Results Page: Here are steps taken to build Results Page (Code will follow):
1/ On the Results Page created a Recordset using the bindings dialog box. Used the Advanced Recordset Dialog Box. In the Advanced Dialog Box I used the Select and Where features to create a Recordset that created a 3 column table (records.County, records.ListPrice, records.PropertyType). In the Variable box I created 3 variables (varCounty, varListPrice, varPropertyType). varCounty and varPropertyType parameters are text (Type) and % (for Default Value). varListPrice parameters are floating point (type) and % (for Default Value). RunTime Value is $_REQUEST["ColumnName"].
Here is the Code generated by Dreamweaver. Note, I am not including the code to access the database, because in all tests I am able to access the table. In fact first time I built the dynamic table, everything worked and I saw the Colum and default value. Have never been able to duplicate that effort. :-)
Here is code:
<?php
if (!function_exists("GetSQLValuestring")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION<6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) :
mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "". $theValue ."" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "". $theValue ."" : "NULL";
break;
case "defined"
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$varCounty_rslistings = "%";
if (isset($_GET["County"])) {
$varCounty_rslistings = $_Get["County"];
$varListPrice_rslistings = "%";
if (isset($_GET["ListPrice"])) {
$varListPrice_rslistings = $_GET["ListPrice"];
$varPropertyType_rslistings = "%";
if (isset($_GET["PropertyType"])); {
$varPropertyType_rslistings = $_GET["PropertyType"];
mysql_select_db($database_MyDB, $MyDB);
$query_reslistings = sprintf("SELECT records.County, records.ListPrice, records.PropertyType FROM records WHERE records.County LIKE %s AND records.ListPrice LIKE %s AND records.PropertyType LIKE %s", GetSQLValueString($varCounty_rslistings, "text"),GetSQLValueString($varListPrice_rslistings,"double"),
GetSQLValueString($varPropertyType_rslistings,"text"));
$rslistings = mysql_query($query_rslistings, $MyDB) or die(mysql_error());
$row_rslistings = mysql_fetch_assoc($rslistings);
$totalRows_rslistings = mysql_num_rows($rslistings);
?>
That's the code that was generated by Dreamweaver.
Thanks in advance for your assistance

Problem while creating assets using BAPI

Use table enhancement BAPI_TE_ANLU
Diagnosis :The BAPIs for creating and changing assets currently support only those customer enhancements that relate to the user fields created using SAP enhancement AIST0002.
Can anybody give the appropriate solution why this error is coming while creating assets using BAPI.

Looks like you are trying to transfer custom fields into the asset master data that were not added following the steps in enhancement AIST0002.
Using EXTENSIONIN parameter, you can transfer user fields from the asset master record. However, it is not possible to transfer fields that are updated in user-defined tables. Only user fields that were defined using SAP enhancement AIST0002 and are automatically updated in table ANLU can be udpated in this way. This means you have to use table extension BAPI_TE_ANLU.
Enhancement AIST0002 contains function module EXIT_SAPL1022_001 as a component in which user fields can be implemented.
The documentation ( BAPIPAREX) of the structure that forms the basis for this parameter contains additional information about using this parameter.
Please check how table ANLU has been enhanced and also go through the documentation of enhancement AIST0002.
Regards,
Shyam

Problem while executing script in Toad - How to use '&' in the sql script ?

I have to execute sql script in toad. Sql script has one insert query in which one insert-value is 'USA & CAN'. When I executed the script in toad by pressing F5, I got a prompt window asking for the value if 'CAN' as it is after the &.
I tried using[b] {escape '\' } .... but could not resolve the problem.
Is there any solution or workaround to overcome this problem. I have thousands of records with such values and I have to use sql script only.

There is an option in TOAD to change this behaviour.
Look in VIEW/OPTIONS/SQL Editor/
Uncheck the box for "Scan statements for bound variables before execution".
In SQL*PLUS it would be SET SCAN OFF
(desupported version is SET DEFINE OFF)
Message was edited by:
Sven Weller

Problem while recording script using Open script.

Similar Messages

Maybe you are looking for