Problem while releasing a transport request to Quality for BADI

Hi i have implemeted a BADI for ME21N User exit.
I have transported the BADI to Quality.
It is giving an syntax error.
But iam not getting any error message in Development.

Error in ABAP application program.
The current ABAP program "CL_EXIT_MASTER================CP" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "ZCL_IM__ITMETAL_ME21N=========CP ", the following syntax error
occurred
in the Include "ZCL_IM__ITMETAL_ME21N=========CP " in line 5:
"INCLUDE report "ZCL_IM__ITMETAL_ME21N=========CL" not found."
This is what the error iam getting .
But iam not able to see this include anywhere in SAP.
I

Similar Messages

Error while Releasing a transport request - DSO 0SD_O03: Active version

Hi all,
I am getting below error when I am trying to release a transport request.
Object ODSO 0SD_O03: Active version differs from modified version.
I activated DSO again,but I was not successful to correct the error.Please help me correcting this error.
Regards,
Bob

check
match and copy while installing the business content
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.With the most important object types, the active version and the SAP delivery version can be matched.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually.
A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content.
When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Installindicator separately.
The active version is overwritten with the delivery version if
 the match indicator is not set and
 the install indicator is set.
check following thread
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/102906a4-f13d-2e10-7199-ce316ff254b8?QuickLink=index&overridelayout=true
Thanks and regards
Kiran

Error occured while importing the transport request to quality

Hi,
The driver program and form are in active status. We got the output also.
When we checked the transport log for request(TR), it says that the form is not yet imported into EQ1. The system will update the transport log if there is any error related to driver program or form. Here we donu2019t find any error. As per the system response, u2018Import post-processing is not performed for this objectu2019.
I am getting below error while importing the request.
Import post-processing is not performed for this objectu2019.
Could anyone please provide me the solution.
Regards,
Hemant.

Hello,
i think u r working on scripts ?
if u r transportung the scripts i u need tcode SCC1.....
Thank u ,
santhsoh

Problem while creating the Transport Request in BI Development.

Dear Friends,
We are trying to transport the objects from BW Development System to BW Production system. We are using the Path RSA1-> Modeling -> Transport Connection.
In Transport Connection i selected grouping "Only necessary objects" and later i selected the ODS object into right side panel (Transport Area), by default it showed as $TMP package, to change the Package into our own package we clicked on Package pushutton. It popup a screen "Select Objects for Changing Package" here we selected all and clicked on OK button and it asked for the new Package name where we specified our own package name (ZBIW) and clicked on save button and it got save after changing the package name we selected all the objects and clicked on the Transport pushbutton but it did not asked for a request id and we got the following message.
Error/Info Message:
Edit objects separately since they belong to different original systems.
Choose 'Display object' or 'Cancel'.
Please give us your valuable input for our issues.
Thanks in Advance.
Regards,
Akash.

Hi,
find the Objects for which the system is creating this error from the error messages.
And then search for those objecs in the collected objects ,in right hand side screeb of Transport connector. you can find them two times ticked.And then remove tick mark for one .So that. you are making tick mark for only one time for those objects.
with rgds,
Anil Kumar Sharma .P

Problem while releasing Request

Hello All,
In one of our client's DEV Server, we are facing problem while releasing requests.
When I release a request it is not appearing in the PRD import Queue.
When I checked the TMS Alert Viewer, it is showing as" TP REPORTED ERROR"
And more over when I checked in the OS level,only the cofile is created not the data file.
Please suggest ..
Thank You,
Regards,
Hasan

Hello,
Here is some contents from Slog.dev
Name: SLOG1126.DEV
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (10), I'm waiting 4 sec (20110627095120). My name: pid 8084 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (20), I'm waiting 1 sec (20110627095151). My name: pid 8084 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (30), I'm waiting 4 sec (20110627095215). My name: pid 8084 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (10), I'm waiting 4 sec (20110628123131). My name: pid 7500 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (10), I'm waiting 4 sec (20110630093900). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (20), I'm waiting 1 sec (20110630093925). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (30), I'm waiting 4 sec (20110630093949). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (40), I'm waiting 2 sec (20110630094020). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (50), I'm waiting 2 sec (20110630094055). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (60), I'm waiting 1 sec (20110630094132). My name: pid 8124 on stisdev (APServiceDEV)

Problem in tables of transport request !!!!

Hi all,
When i doing the Charm Process....nd during that when the developer generates the transport request....at that time that tp request appears in table /tmwflow/trordhc but it does not appear in /tmwflow/track .... nd after releasing the subtasks and then finally the whole transport request....at that point also it does not appear in /tmwflow/track ..... after this when the basis person pass that transport request to quality....then the /tmwflow/track shows 1 record for that transport request.....so finally after the whole flow /tmwflow/track will show 2 records for that transport request i.e 1 of quality and 1 of production....logically 'dev' record should also be there.....what i am noticing is after few hours like 2 or 3 hours that development record started appearing in table /tmwflow/track .... so is it a problem in configuration of solution manager or this sudden appearance of dev record is ok....coz ive to build a report in which it displays the tracking of tp requests....
Any suggestions would be helpful...
Regards,
Deadlocks

Hey deadlocks,
many ChaRM tables are updated as Fernando said when cmssyscol job finished.
I guess those 2/3 hours correspond to the time u waited before the job runned. The transaction solar_eval and a couple of others allow u updating data as well.
U have to know that this job may sometimes/quite often give unsupected/missing data; and also delayed. The best you can do is simply read the tr log using a function modul and interpretate info concerning the transport requests
    CALL FUNCTION 'TRINT_TDR_USER_COMMAND'
      EXPORTING
        iv_object = lv_object
        iv_type    = ls_sel_node-type
        iv_command = lv_command
      IMPORTING
        ev_exit    = pv_exit.
LV_OBJECT                                             SLMK900004
LS_SEL_NODE-TYPE                                     REQU
LV_COMMAND                                             TAST
for example.
You can debug log reading in SE01 and put a watchpoint on instruction 'CALL FUNCTION'. It is the second one.
This will display log on screen
Good luck
Khalil

Objects not changed after successful release of transport requests

Hi All,
We added two free characteristics to a query and collected that query in a transport request in development.The request is released and imported successfully in quality.The problem we are facing now is that the two characteristics are not reflected in the query.But the hexadecimal numbers for the two characteristics are captured under the released transport request in Quality.
Could someone please help me out in solving this issue.............
Regards,
Shravani

Hi,
Thanks for the prompt reply.We have collected it through transport connection only.As I have mentioned in the thread import is successful ,hexadecimal number is present under the transport request but the changes are not present in the query.Could it be the problem with importing?...................
Regards,
Shravani

We couldn't release any transport request!

Hi experts,
We could't release any transport request on DEV from today.
We could do it until yesterday.
We have never changed any settings.
Except release, we can use SAP system, and
we can import released transport request to QAS .
Also I could tp addtobuffer on DEV.
[Operation]
SE10 -> select transport request -> click [release] button
and, we can see the error message as below.
Error Message *****************************************************
Test call of transport control program (tp) ended with return code
[Transport Log]
We can see the log as below.
ERROR: No connect due to DbSl Load Lib Failure
ERROR: environment variable dbms_type is not set.
ERROR: Connect to RDV failed (20090220140504).
ERROR: Connect to RDV failed (20090220140740), failed to read table SVERS.
[Our Action]
1. Change Environment variable & Restart SAP (note 351586)
2. replace tp & saptrans
3. change parameter (note 175627)
4. add full control to everyone on sap/trans
5. see note 534765，98678，128126，592514，799058，879941，508140，610640
Thank you in advance.
BR,
Toshi

Hi,
Thank you for your reply.
I did r3trans -d, and the result is as belllow.
F:\usr\sap\RDV\SYS\exe\run>r3trans -d
This is r3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
unicode enabled version
2EETW000 sap_dext called with msgnr "2":
2EETW000 -
db call info -
2EETW000 function:   db_ntab
2EETW000 fcode:      NT_RDTDESCR
2EETW000 tabname:    TADIR
2EETW000 len (char): 5
2EETW000 key:        TADIR
2EETW000 retcode:    2
r3trans finished (0012).
Also I checked TP_DOMAIN.pfl, but it seems that there is no problem.
But I found doubtful point.
It is environmental variable, and now it is differnt from last friday.
Example, last friday , there was variable as bellow,
but today I couldn't find them
In the meantime , I will deal with them.
dbms_type=MSS
MSSQL_DBNAME=RDV
MSSQL_SCHEMA=rdv
MSSQL_SERVER=<hostname>\RDV
Toshi

Releasing a Transport Request ends with error code 0012.

Hi,
We have a Development system and a Production System (both running on separate windows machine) but they are not connected in STMS. We perform transporting of Requests at o.s level and NOT through STMS.
We are facing this new problem - We are trying to release a Transport Request in SE01 and it ends with error code 0012. The task inside the Request is released without any error. There is no Notes in SAP Marketplace for this.
Test call of transport control program (tp) ended with return code 0012
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK EFIK900025 pf=E:\usr\sap\trans\bin\TP_DOMAIN_EFI.PFL -Dtransdir=E:\usr\sa"
which checks the export requirements, returned the following information:
Return code from tp: 0012
Error text from tp: ERROR: Buffer check failed.
System Response
Further processing is terminated.
Procedure
Check the following points:
Feasibility of the transport control program tp
Parameter settings in the transport profile
Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
Write authorization for the subdirectories
Write authorization for the files of the subdirectories cofiles, data, log, sapnames
Release the request again when the error has been removed
Please help.
Regards,
Mohan.

Hi Mohan,
Nice to hear that that your problem is resolved.
For Pamater CTC, please check the below links:
Automatic transport between DEV clients ?
http://sapsolutions.searchsap.com/kw;ExtendedTransportControl/content-sap.htm
Regards,
Hari Kishan

Can give me the details how to release the transport request to the qa

can give me the details how to release the transport request to the quality server pr production server
thanks

Hi,
Use transaction SE09. Here select "modifiable" .Then click -Display.
Now you get a list of all requests which can be released.
Locate your request number and drill down. Release the sub-request first and then the main request by selecting and using the "transport" icon.
Muraleedharan.R
091 9880028904

How could I find out which user did release a transport request in the sour

How could I find out which user did release a transport request in the source system

Hi Tina,
Use SE10 t-code and type abaper user name in the user field then check released check box then display and select request number which is released, double click on said request number and click on "object list of request" Then click on "comment: released" than you can find out the released user name at the end of request number along with dated of released.
I hope you problem will be solved.
Regards,
Anil

How to release a transport request with warnings using a function module?

Hi,
I want to release a transport request(which has some warnings) using some function module .
The warnign that i get when i try to release the Transport Request manually is "not all objects could be locked..."
Which function module can I use so i can release such a transport request?
I am currently using TR_RELEASE_REQUEST but I am unable to release the TR, it throws an exception.
Also i wouls assume that the function module mentioned would take care of releasing all the unreleased task
under the request.
Regards,
Bikash.

Hello Bikash
As an alternative (to cope with the warnings) you may use TRINT_RELEASE_REQUEST.
However, since this fm offers only a single task/request as IMPORTING parameter you need to take care about unreleased tasks yourself. Looking at SE09/SE10 even there you do not have the option the release a request including all its tasks.
Regards
Uwe

Badi/Enhancement to while creating a transport request

Hi Friends,
Please let me know if there any enhancement or Badi while creating a transport request to add a additional field while creating a transport request.
I found below list of badis but are not relevant to my requirement
CTS_EXPORT_FEEDBACK
CTS_IMPORT_FEEDBACK
CTS_INT_REQUEST_CHCK
CTS_REQUEST_CHECK
CTS_TASKDOC_TEMPLATE
Thanks in advance

solution removed, not correct.
Edited by: vishal kapoor on Nov 28, 2008 2:41 PM

Workflow To restrict the release of Transport request

Hi Guys,
Can any one tell me is there any Standard workflow to restrict the User's to release the Transport Request?
Regards
Venkatesh.S
Edited by: venkatesh saravanaperumal on Jan 16, 2008 11:40 AM

Check this template
30000524
45301534
71000008
74500938
74500939
Thanks
Arghadip

Release the transport request

Hi,
I created the transport request.I want to release the transport request from developement to testing ,
Please tell me how to do that.
regards,
chinna.

Hi,
Check the below steps.
1. Go To SE09 or SE10.
2. Click 'Display' button.
3. TR will be list out in Tree view.
4. Place the cursor in the TR which is going release.
5. in menu, Request/Task->Complete check->object and
Request/Task->Complete check->Check Request Consistancy
Request/Task->Complete check->Inactive Objects.
6. in above if you get any error, you should rectify the error and repeat all the steps again. otherwise do the step7.
7. Click the 'Release Direclty'[F9] button in the toolbar.
Regards,
Boobalan S

Problem while releasing a transport request to Quality for BADI

Similar Messages

Maybe you are looking for