Problem while releasing the segment

Hi,
I have added 2 new fields to the existed segment and then i am trying to release it throwing an error message 'A released defination already exist for '46C' in release ZONMORD_FEAT'.
can anybody know why the error is coming.
Thanks in advance,
Sudheer. A

Hi,
No need ,just cancel the segment release and then add ur fields....also while attaching the segment to ur basic type,u have to first cancel the release of basic type and then add the segment and then release...Let me know if u face aby other problem
Regards,
Nagaraj

Similar Messages

Problem while releasing the request

I created a customized Z report from the existing standard SAP report and also created a new tcode into the development server, and released the request via se09 into quality server. Now when I try to execute this tcode in the quality server, its giving me a error message 'status STANDARD of the user interface ZRM06ENDR_ALV missing'. Due to which its not displaying various push buttons like 'print preview' 'messages' etc. However its working fine in the dev server

You should creat GUI status. You can copy it from another report by clicking right on the gui status from which you copy. Then specify the target report. Then in your Z report activate the gui status. Also write the code below:
form alv_menu using rt_extab type slis_t_extab.
set pf-status 'STANDARD_FULLSCREEN'. " Write here your gui status' name .
endform.
In call function reuse_alv_grid_display set i_callback_pf_status_set parameter as 'ALV_MENU'.

Problem while releasing the production order.

Hai gurus,
When i release the production order , SAP doesn't block when i have a deficit of stock for some materails.I checked all the customizing and found every thing is fine.
As the materials that has defict stock has back flush indicator, is that the reason why the system is assuming the stock when releasing.

Hi,
You need to consider the following customization settings
(1) OPJK - For the Plant/Order type/Availability check-2 for the material availability - Release material - set the indicator '3' No release if parts are missing
(2) OPJJ - For availability check & checking rule - check what all elements are considered as part of ATP check.
With these settings - in the production order if the order header has status MSPT - Missing parts (i.e. components are missing) only then system will stop the release of the order.
I hope this addresses your query
Warm regards,
Umesh

Error while releasing the Billing document

Hi Everyone,
Encountering an error with the description 'Balance in Transaction currency' while trying to release the Billing document from VF02 transaction, still didnt come across the right oss note that can remove this error, can any one give me a clue on this,
Rgds,

hi,
We are facing similar problem, when releasing the billing document to accounting.
Have you been able to find the solution to this problem. If so, kindly suggest the answer
Thanks
Dinesh

Error while releasing the Process order

while releasing the Process order i am getting the follwing error message
Message no. CO118 Release of order not possible
Cna you Please any body explain me detail of thi error ie where the error lies.
Thanks

Hi,
In Process Order Header Screen Go to ---> Log ---> On Release.Here you will find the detail error behind this problem.Go though it .Resolve it and then try to release the Process Order, and if required get back to us.
Suppose reason may be,
- Missing part
- Missing Capacity
- Batch Determination is required to perform.
- Any User Exit (Other then std. SAP)
Regards,
Dhaval

Could not start transport control program tp while releasing the TR

Hello experts,
i have a problem if any one phase this kind of problem & if u know the solution please share to me its urgent
problem in Development system ,for this i had updated kernel , TP patch level , R3trans patch level in development and quality system , but still the problem is occurring in development system . while releasing the Transport Request this error is coming that too not in frequently some times it is happening some times it not happening ( some times its working fine )
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An
error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway
Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then
execute the command again.
please suggest me what can i do for better , how can i resolve this issue
Thanks & Regards,
Narasimha

Hello experts ,
Last one and half month on-words we are phasing some problems on STMS
while releasing the Transport Request getting this error messages on
status-bar
1. "could not start transport control program tp"
2. while importing the TR into quality system getting this error message" RFC Error :timeout during allocate/CPIC-CALL "
3.while forwarding the TR from QAS to PRD : " RFC Error :timeout during
allocate/CPIC-CALL "
after continues refreshing,we are able to release the request and importthe request into quality system. But after some time again same problem
coming
for this we did the kernel upgrade , tp , & R3trans update and STMS RE-
Configuration etc...But no use with this we got the same problem after
finishing all these workaround , but don't know what happened after 2-3
days STMS starts working fine DEV-QAS-PRD ,
Now we are in the same problem after continues refreshing,we are able torelease the request and import the request into quality system. But after
some time again same problem coming
please suggest us what could be the reason behind this & what we can do
for better

Problem while dowloading the file from Application Server

Dear Experts,
I am facing the Problem while downloading the file from Application server.
We done the automatic function while saving the invoice, this will create an idoc, and this idoc is written in the Application Server.
I am running the Transaction AL11 and select the record, and from menu --> List, i am downloading into TXT format.
But for some segments, the length is long, and so the last 3 to 4 fields values are not appearing in the File. Even though i am unable to view the values in the file before downloading. But i can view in IDOC.
Please help me to solve this issue.
Thanks & Regards,
Srini

but our user will use the Txn. AL11 and they will download from there
Educate the user On a serious note, tell him this is not how data from app server should be downloaded. You can ask him to talk to the basis team to provide him access to the app server folder where the file is being stored.
I can set the Variant and put this in background, But always the file name will be change, Like we use Time stamp in the File name.
You can't automate this process by scheduling in BG mode. This is because the in BG mode you can't dwld the file to presentation server.
Hope i'm clear.
BR,
Suhas

Problem while releasing Request

Hello All,
In one of our client's DEV Server, we are facing problem while releasing requests.
When I release a request it is not appearing in the PRD import Queue.
When I checked the TMS Alert Viewer, it is showing as" TP REPORTED ERROR"
And more over when I checked in the OS level,only the cofile is created not the data file.
Please suggest ..
Thank You,
Regards,
Hasan

Hello,
Here is some contents from Slog.dev
Name: SLOG1126.DEV
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (10), I'm waiting 4 sec (20110627095120). My name: pid 8084 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (20), I'm waiting 1 sec (20110627095151). My name: pid 8084 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (30), I'm waiting 4 sec (20110627095215). My name: pid 8084 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (10), I'm waiting 4 sec (20110628123131). My name: pid 7500 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (10), I'm waiting 4 sec (20110630093900). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (20), I'm waiting 1 sec (20110630093925). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (30), I'm waiting 4 sec (20110630093949). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (40), I'm waiting 2 sec (20110630094020). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (50), I'm waiting 2 sec (20110630094055). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (60), I'm waiting 1 sec (20110630094132). My name: pid 8124 on stisdev (APServiceDEV)

CATS - error in workflow while releasing the time entry record

Dear Experts,
I have setup the configuration for CATS with approval along with workflow. I have maintained the Entry profile and also the Approval steps.
After entering the time sheet and while releasing the record, system is prompting to enter the user id, I have entered the user id and click OK button, system is producing the following error message:
An error occurred on starting the workflow
Message no. LR365
Diagnosis
For technical reasons, the system cannot start the SAP Business Workflow.
Procedure
Contact your system administrator.
I have activated the work flow customization using Trnx SWU3.
Can some one please help me out in solving this problem.
Thanks in advance,
Regards,
Praveen

I got the solution, we have to maintain the task TS31000004 as general task in the transaction PFTC - 31000004 -> Additional Data -> Agent Assignment -> Maintain, in the next screen GOTO -> Attributes (F8), then Change the task type to General task.
Also we have to create variant by name WORKFLOW for the program RCATSB01.
The above has solved my problem.
Thanks for support.
Praveen

'No Administrator found for the task' while releasing the task in AR31

Dear Gurus,
i am facing the issue 'No Administrator found for the task' while releasing the task in AR31 while doing Mass Asset change.
Please help to provide the solution.
Many thanks.
Kumar

Dear Kumar,
error 5W141 indicates that the configuration for workflow is not in place fully.
1. SWU3 => Automatic customizing
You find the customizing of the workflow under Basis -> Business
Management -> SAP Business Workflow. There you can check the minimum
customizing for workflow:
2, Please check in transaction OAWF if the responsible users are
    assigned to the workflow tasks
    Menu path: Basic Functions
                 Assign tasks to agent
                    Correct worklist
                    Release worklist
                    Correct and release worklist
3, In addition check if the users are assigned to the workflow-tasks      in the basis-component (transaction
     PFTC).
   Menu path: Task type: TS   - Standard task
       Task     : corresponding task (e.g.8010 - correct worklist
The relevant logic is: if the system finds that the agent or user is defined, it will go straight to T-code SO01. And the user can edit the work list there.
Following is a reference notes :
            322526 Analysis for workflow problems
Regards Bernhard

Problem while exporting the data from a report to an excel file.

Hi SAP guru's,
I have a problem while exporting the data from a report to an excel file.
The problem is that after exporting, the excel file seems to have some irrelevant characters....I am checking this using SOST transaction..
Required text (Russian):
Операции по счету
№ документа     Тип документа     № учетной записи     Дата документа     Валюта     Сумма, вкл. НДС     Срок оплаты     Описание документа
Current Text :
   ? 5 @ 0 F 8 8 ? > A G 5 B C
!   4 > : C       "" 8 ? 4 > : C      !   C G 5 B = > 9 7 0 ? 8 A 8        0 B 0 4 > : C         0 ; N B 0      ! C <       ! @ > : > ? ; 0 B K        ? 8 A 0 = 8 5 4 > : C
Can you help me making configuration settings if any?
Regards,
Avinash Raju

Hi Avinash
To download such characteres you need to adjust code page to be used during export. You can review SAP note 73606 to identify which code page is required for this language
Best regards

Error while releasing the billing document to accounting

Dear All,
I need your favor to resolve the below issue:
(System SAP SAP ECC 6.0)
User is getting the below error message while releasing the billing document to accounting in VF02:
This is an inter-company billing document (B. type : IV) created in company code 0151. Payer is "IC0186", verified the customer has been setup in 151.
Corresponding invoice has been successfully posted in company code 0186. (Partner : P0151)
User is able to post the inter-company document in 0151 using other inter- company partner (ex. IC0183). Therefore, seems that Document type can't be an issue here.
"Consolidated companies 151 and 186 are different
Message no. F5080
Diagnosis
The number of the affiliated company must be clear for the selected document type for all the line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
Procedure
If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account."
Could anyone please suggest what can be the reason, if any configuration is missing. Any help is this regard will be highly appreciated
Thanks in advance,
Praveen

Hi Murali,
Thanks for the prompt input, however as mentioned document type can't be an issue. Since user is able to post the document (same document type) using other inter-company partner in 0151.
Thanks,
Praveen

Error while releasing the custom table

Hi Everyone,
Modified the User defined include files of a particular table for one of our requirements ( In the function group of the table maintenance generator ) and encountered an error while releasing the request to Quality server, the error disappeared after regenerating the table, this seem to be happening only when the user includes of a table maintenance is introduced/modified, why the release doesnt work when there is any change in the maintenance generator?,
Rgds,

Hi Sailatha,
After modifying, you need to re-generate everything so that, the changes come in effect.
Trying to release without re-generating will surely result in error.
Regards,
Raj

Error while releasing the TR

hi All,
We are facing an issue while releasing the Transport Request. The error is "No valid TM target found".
Request your valuable inputs on this.
thanks in advance
With Regards,
Lata

Hi,
is it possible for you to import request manualy on OS level. once request created, it will split up in two files, one is R & second is K, import that files manualy in usr/sap/trans/data and usr/sap/trans/cofiles directories respectively and tp import request no. client no. or you can login to the target system client 000 by using stms ->import queue--> clieck on request and import it.
The error actualy you have given is related to your target system, the request is not able to find out or got the target system.
Regards,
kiron.

Error While Releasing the Billing Document Msg No. KE/AD 243

I am getting error while releasing the billing document
Error No KE/AD 243
This error comes in particular billing document only others are posted correctly.
Rgds
Dhiraj

Dear Anil
We had applied EHP3 enhancement, before EHP3 is working fine with no transfer sign assignment but after EHP 3 it gives the error and not in all billing document but in particular document only. so i think there is no changes required in KE4I.
Rgds
Dhiraj

Problem while releasing the segment

Similar Messages

Maybe you are looking for