Problem while saving the query

I have created transport request from solman, and when I try to save the query under the the request it is asking whether to create a new task under a different specific user, if I cancel it the query is not getting saved, please help me.
thanks

Hey Sudeer,
This happens becoz the Query that u are changing is already locked by another transport request which is owned by diffrent user..
Ask the relevant user to release the corresponding request, so that u dont get the prompt again....
To avoid it, just create a new Query( totally new query ) and then assign your transport request to it..
Reward points for usefull answer...
Regards,
Anand Rangarajan

Similar Messages

Getting Brain Error while saving the query--Need Immediate solution

Hello Experte
I designed query like this.
G/L account structure is defined in Rows. Before explaining about columns Let me Explain u about my ORG structure.
Company codes are defined in R/3 like this.
Company Code
1000 for Local Currency(HSL01)
2000 to 7000,IEL for group Currency(KSL01).
Iu2019m extracting the data as it is from R/3 to DSO and again by writing routine I splitter the data for months(EX: HSL01 is ApriL,Hsl02 May,u2026u2026u2026u2026u2026u2026.KSL01 April, KSL02 may,u2026u2026u2026. Upto to 16 periods) this is R/3 data. This data I differentiated based upon currency types. If currency type is 10 then Local Currency 30 Means Group Currency.
Again Iu2019m receiving the data from Flat Files for subsidiaries(IEAI,IEG,IEEL,ISSCI,IHAL,TTM-US,TTM-INDIA,TTIT). This data I loaded first into DSO by writing Routine at field Level for G/L account to convert G/L Descriptions into Numbers.
After that I loaded data from first DSO to Second DSO by writing to convert respective currencies into INR and again loaded to cube by Direct mapping.
Again Iu2019m receiving the eliminations data from R/3 through Ztable. This also Iu2019m extracting from R/3 and loaded into dso and again into cube.
Now I will Explain about my Report.
In Columns I defined 3 selections for each month. U can observe that in Document. Like that for each month Iu2019m getting three selections and for subsidiaries 2 selections for each month. If we observe total Iu2019m getting 13 selections for India and 9 selections for each subsidiary. If subsidiaries increase I need to increase selections, automatically columns will increase. Now for Q4 2 new subsidiaries are added I need to added. After adding and while saving the query then only Iu2019m getting brain error.
Could any one sort out this.
Thanks,
Sony

HI Ravi,
Thanks for the reply.
While saving the query in BEX i'm getting this error.
Diagnosis
Query ZQ3_MISGRPSUMMARYREPORT_010209 contains 8192 differing selection cells. However, only 8191 selection cells can be processed in a query.
Procedure
Please simplify query definition ZQ3_MISGRPSUMMARYREPORT_010209.
This was the error i'm getting. How to simplify this....
Any answers please.
Thanks,
Sony

Problem While saving the Invoice

Dear Experts,
                  I am facing the Problem while Saving the Invoice, In invoice, We assigne the Output as RD00 and Medium as 6 (EDI).
When we are saving the Invoice, it getting as ' Updated Terminated'. When i found where the Error is coming in SM13, it showing in as Function Module "RV_MESSAGE_UPDATE' & Error Details is 'EAN11 not found for Material'.
                 But in Invoice whatever we enter the Material number, we maintain the EAN11 code. This EAN11 code is seen in MARM & VBRP Table. Unable to find the what the exact error is.
               please help me to sort this issue, Its business complicated.
Thanks in Advance,
Srini

Hi Asik,
          Thanks for your valuable Message.... I run as you suggested, but the dispatch time i kept as 1 or 2. because the program RSNAST00 is picking the values only for 1 or 2. so i run manually,, as of now the issue is, in the invoice number, for one material number, the Billed quantity is zero, so the UOM is getting as initial. From those vaues we are picking the EAN11 from maram table.
So, i modify that and run the EDI manually. As of now its working...
          Thanks for your reply,,,
Regards,
Srini

QD crash while saving the query

Hello colleagues,
I have created a query, which I doubt has some issues with the message server. I forcibly saved the query and then I'm receiving a dump - RSNSB VOID Erroneous FormVar.
I can regenerate the query. But, please advice me how to prevent such errors in future.
Regards,
Arif

Hi,
The error you have received is a resultant of an erroneous formula variable defined in your query.
In general, if you suspect an error in the query, it is better to check the query for errors before saving it.
This way you can prevent unwanted dumps.
Regards,
Bharath

Errors while saving the query

We are getting the following errors after saving the query:
1)The system tried to insert a data record, even though a data record with the same primary key already exists 0
2)An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause 0
3)Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION 0.
Not able to save the changes in Query also.
Always welcome for any ideas please...
Thanks in advance.
Bala

Hi,
Please apply the corrections from Note 1015402 using SNOTE transaction.
Regards,
Selva

Error while saving the query A299 Urgent

I had created a Query on Multi provider and when i am making changes to it while creating and saving the same it is giving me a error "[A299(BRAIN)] Terminate:System error in program Cl_RSD_MULTIPROV and the form GET_PART_iOBJNM_CMP-01 "
Please Help in resolving the same thanks.\

Hello Sreekanth,
Generally this error is due to inconsistency in Multiprovider. Could you please do a dummy change for this
multiprovider and re-activate it.
This will resolve your issue,
Regards,
Arvind

Sales report issue while saving the query

Hi,
I am working on Sales reports and that i came across a senario and facing a problem, can anyone help me over this
Senario:
I created a structure in Rows and added few keyfigures to the New structure which is in Rows.
After that i added 2 charcteristics.
Now the problem is that when i save the query i am getting the Keyfigure structure first and then characteristics
But, i need the 2 charcteristics first and then i need the Keyfigures
I changed the query as i want it like i placed 2 charcteristics first and then the keyfigure (structure) and the query saved sucessfully.
The problem is that when i open the query again i found that the Keyfigure (structure) first and then the 2 charcteristics
I did it all my possible ways still the problem perstists
Edited by: MAHESH MUMAR on Oct 6, 2008 2:22 PM
Edited by: MAHESH MUMAR on Oct 6, 2008 2:32 PM

mahesh,,,
can u xplain more what xactly is ur need.
"After that i added 2 charcteristics."
so do u want chars & keyfig in Rows only.
this way i dont think u will have report output ..
Take simple e.g. below:
$----
Quantity
Material
Channel112--
1
Channel223--
34
Is this how u want ur report to display?
that means u will need material and channel in rows and keyfigures ($ & quantity ) in Columns.
if this is not what u seek what else is your rek.
sometimes such display helps to understand.
Yes u can add chars in Rows and then add structure of keyfigure.
Yes you can change the sequence of display in Rows among different structure.
But do u still have something in columns.
It is intersection of Rows & Columns that displays result data set...
let us know in more detailed e.g.

Problem while executing the query

Hi,
I have a query when iam trying to execute the query it is giving following error
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Select a valid Date (OR) Fiscal Period (OR) Calendar Month
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Select a valid Date (OR) Fiscal Period (OR) Calendar Month
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1452)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3979)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Proxy.executeFunction(Jco640Proxy.java:267)
Iam not sure why i could not able to execute this query.I could able to execute and run other queries.
Please help me..
thanks in advance

Hi,
Please check if you have used any formulae or function modules to derive the fiscal period/month from calday. Maybe the date being assigned is not of the same format as expected due to which the error (input valid date or calmonth or fiscal period) is being generated.
Regards,
Manoj

Problem while saving the BEx qeueries

Hi,
I am facing a strange problem.
I am trying to copy the old query to a new query. Now when i just change/try to copy by using save as function in query designer the following problem occurs
1. An unexpected object variable or with block variable not setu2019 error occurred in wdrblog error(s) are logged.
I am using BEx 3.5 patch 11.
Note: I checked the relevant error message in Service marketplace but they are asking us to go thorugh the OSS note 571831,575434. But in these mentioned notes the patch level & Version are lower than what we have.
Waht might the problem. any clues would be great & appreciated
Thanks

Hello Venkatesh,
I didn't come across this type of problem before, just try to copy the query by using t-code 'RSZC'. Check the query whether everything is correct.
Let me know if you need more information to copy the query.
Thanks,
Umashankar

Problem while changing the query of the field in Oracle apps 11.5.10

Hello All,
Requirement:
User want to change the query of the LOV attached to Ordered item field on Line items tab on the Sales order form in Order managment
Block name = 'LINE'
Field name = 'ORDERED_ITEM_DSP'
LOV attached to this field in FMB: ITEMS
LOV attached to this field in front end: ENABLE_LIST_LAMP
Problem: Following code is firing at all points (Debug messages are appearing at all points) but Query of the LOV attached to item is still same.
How can in FMB LOV is "ITEMS" and in front end "ENABLE_LIST_LAMP"
My guess is there is some problem with the LOV name which we are passing in the code below. Because LOV name attached to item are different in front end and FMB. There is no LOV in FMB which has “SYSTEM ITEMS Description” kind of structure.
I have written following code in custom.pll (l_chr_rg_query is query taken from the record group attached to “ITEMS” named LOV with some modifications ex: rownum<6 so that it will show only 6 records in LOV if it is really firing our query for LOV)
IF ( form_name = ‘OEXOEORD’
AND block_name = ‘LINE’
AND field_name = ‘ORDERED_ITEM_DSP’
AND event_name = ‘WHEN-NEW-ITEM-INSTANCE’
THEN
MESSAGE (‘message1’);
l_chr_rg_name := ‘XXLION_UNIFORM_CODE_RG’;
l_chr_rg_query :=
‘SELECT item, item_id, item_description, inventory_item_id,item_identifier_type,null item_identifier_type_meaning, ‘
|| ‘inventory_item, address, cust_address, item_definition_level ‘
|| ‘FROM oe_return_items_v ‘
|| ‘WHERE (sold_to_org_id = :parameter.lov_num_param1 OR sold_to_org_id IS NULL)’
|| ‘ and rownum < 6 ORDER BY item’;
MESSAGE (‘message2’);
l_rg_id := FIND_GROUP (l_chr_rg_name);
MESSAGE (‘message3’);
IF ID_NULL (l_rg_id)
THEN
MESSAGE (‘Creating record group here’);
l_rg_id :=
CREATE_GROUP_FROM_QUERY (l_chr_rg_name, l_chr_rg_query);
END IF;
errcode := POPULATE_GROUP (l_rg_id);
MESSAGE (‘ERROCODE is : ‘ || errcode);
L_lov_id := FIND_LOV (‘ITEMS’); --My guess is this LOV name is the source of problem.
MESSAGE ('Error code is4');
SET_LOV_PROPERTY (l_lov_id, group_name, l_rg_id);
MESSAGE ('Error code is5');
SET_ITEM_PROPERTY ('LINE.ORDERED_ITEM_DSP', lov_name, 'ITEMS');
END IF;

I found that there is no problem with code. My problem is not technical, its a functional problem.
It is related to Inventory's "System Items" KFF.
Can anybody tell me, to this "System Items" KFF, one value set is assigned. but it is of none type of value set. so from where the values in LOV are coming?

Strange problem while executing the Query.......

Hi,
I have created a new query and I am facing the strange behaviour.
When I execute it , it works fine but when one of my colleague execute it , it does not return any value for one of the Price variable.
It works fine with most of the people I have checked except one.
Can somebody let me know the reason.....?
Thanks , Jeetu

Hello,
If it is authorization problem go to transaction st01 and mark the first check for authorization. Under filter insert the user. Click Trace On.
Execute the query with that user and just after the lack of authorization message click trace off.
Read the trace.
Do the same with your user and compare the log of the two.
You'll see what is missing.
Assign points if helpful.
Diogo.

Issue while saving the Query Urgent

Hi all,
I had created the query and also transport it toht QA . but due to some problem i need to change query. when i am trying to make the changes i am unable to do it bcoz the whole query is in display mode only and i am getting a message that the query request is not available as it is released in to the QA .
I am working on BI 7. plz let me know how can i make the change i also tried it by copying the query still i am unable to do it.
Whats d steps that need to follow i know i am missing some where
Regards

Hi
Go to RSA1-> Transport connection-> here click on Bex icon (Red truck icon) and in the next screen assign/create new transport request and then assign this request to your Bex package. Once you complete this, you will be able to make & save changes to Bex query.
Hope this helps.
Pradip

Unknown Error while saving the query to My Portfolio

Hi,
We have a report published on the portal and users are accesing these reports completely through portal. After running the report user is trying to save the report to My Portfolio on the portal and it is giving an error as "Unknown Error". Anybody who faced this particular error, please give your suggestion.
Regards
Vijay

Hi Mike,
Please follow the following steps to resolve the issue:
a. Identify the list of users who are getting the unknown error while saving to My Portfolio
b. Provide a role called COM.SAP.IP.BI.Business_Explorer_Showcase
c. Once the role is provided to the users, they will get a new tab called Business Explorer in the portal and ask them to click on that tab and then click on My Portfolio button in the subsequent screens
d. Once the user clicks the My Portfolio tab this will create the KM folders in the backend for the users to save the report at the run time
e. Once this is done, ask the user to log off and log in again in to the portal
f. There after users will be able to save the queries to My Portfolio
g. Once this is resolved ask the security team to remove the COM.SAP.IP.BI.Business_Explorer_Showcase role (this role need not be given for a long time).Points.
Regards
Vijay

ERROR While Saving the Query

Hi
I am trying to save a a query, as YP_XXXXXXXXXX. it is giving me an error "Namespace /BIC/ must be set to changable". would anyone be able to help me out with the same
Regards
M

Hi This has been solved.
We needed to change the Object type"Query Element" to "Changeable Original". This solved our problem. there is also a realted note 337950 that can help in similar kind of problems.
Thought of sharing it with you all.
Regards
M

Problem While Saving the editable ALV GRID

Dear Experts,
I have a scenario in which i am display the ALV(using class) with some data in the custom container of module pool screen in the non-editable mode.Also i have save and edit buttons.If i click the edit button i have written the code to edit the some columns in the ALV grid, it is working fine.After editing it,when i click the save button then ALV has to refreshed with edited data and then it should go to non editable mode but it is not working.I have written the code for changing the editable ALv to non editable mode as follows :
call method c_alvgd->set_ready_for_input
    exporting
      i_ready_for_input = 0.
*****Row and column of the alv are refreshed after changing values
stable-row = 'X'.
stable-col = 'X'.
*REfreshed ALV display with the changed values
*This ALV is non editable and contains new values
call method c_alvgd->refresh_table_display
    exporting
      is_stable = stable
    exceptions
      finished = 1
      others    = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Could you Suggest me solution for this issue ?
Thanks & Regards,
R.Dhineshraj.

Dhinesh,
I suppose that you are able to get your changes values on screen but not able to get your field in DISPLAY mode from editable mode, let me know if this is not your problem.
When you press SAVE, after the PAI, again PBO will run and hence the editable code for that field will overwrite which will keep it editable.
So, do something like this.
data: gv_edit value 'X'..... "global variable in TOP include
PBO....
loop at ...
if gv_edit = 'X'.
CALL METHOD lo_alv->set_ready_for_input
EXPORTING
    i_ready_for_input = 1.
else.
CALL METHOD lo_alv->set_ready_for_input
EXPORTING
    i_ready_for_input = 0.
endif.
endloop.
PAI.
when 'SAVE'.
gv_edit = space.
When 'EDIT'.
gv_edit = 'X'.
Regards,
Diwakar

Problem while saving the query

Similar Messages

Maybe you are looking for