Problem while searching contacts

hi,I just bought new Passport , If I have used the speed dial "R" for calling say "Rajani" and after disconnecting the call if I search " Sam " in the keyboard then it comes like "RSAM" .I was using Q10 for many months, this problem did not arise on that phone .I have tried restoring the factory setting , but worked for some time but later again same problem occurred .Please help me with it.Regards,Aneesh More.

Think I found a solution.Go into Contacts - Settings. In the Show Account in Contact List, move all the social media accounts to Off.This should rebuild the contact index. Noticed it started to work fine. Then I went back into Contacts - Settings and I reset all the social media accounts to ON. Still working fine. Believe we need a way to reset the Contact Index.

Similar Messages

Annoying problem when searching contacts

Ive got an N81 and this is the first time ive had a nokia in years. My previous phones never had this problem.
When searching the phonebook, lets say i press 'M' not only do the contact that start with 'M' come up but also for example a contact by the name of 'Dave M' or 'John Mob' as the second word begins with 'M'. Is there a way just for the first word that starts with 'M' to come up eg. 'Mary' and not for contacts that contain 'M' in the second or thrid word. Hope I make sense.
Can you please implement this in the next firmware for the N81?
Thanks

that error is because of: http://bugs.archlinux.org/task/20371
just use http over ftp and it would be fine

Problem while creating contact person using SD_CUSTOMER_MAINTAIN_ALL

Hi All,
I am trying to create a contact person to a customer using FM SD_CUSTOMER_MAINTAIN_ALL.Following is the simple code that I am using.FM is not giving any exception.But the contact person is not getting created.can anyone help me regarding this.
DATA: I_FKNVK TYPE TABLE OF FKNVK,
      wa      type FKNVK.
MOVE '0009011357' to wa-kunnr.
MOVE 'Bose' TO wa-namev.
MOVE 'Lalit' TO wa-name1.
MOVE '9980055557'   to wa-TELF1.
*MOVE 'City' TO wa-ort01.
*MOVE 'DE' TO wa-parla.
*MOVE '' to watelf1.
*MOVE 'U' to wa-kz.
APPEND wa to I_FKNVK.
CALL FUNCTION 'SD_CUSTOMER_MAINTAIN_ALL'
EXPORTING
I_KNA1                              =
I_KNB1                              =
I_KNVV                              =
I_BAPIADDR1                         =
I_BAPIADDR2                         =
I_MAINTAIN_ADDRESS_BY_KNA1          = ' '
I_KNB1_REFERENCE                    = ' '
I_FORCE_EXTERNAL_NUMBER_RANGE       = ' '
I_NO_BANK_MASTER_UPDATE             = ' '
I_CUSTOMER_IS_CONSUMER              = ' '
I_RAISE_NO_BTE                      = ' '
    PI_POSTFLAG                         = 'X'
PI_CAM_CHANGED                      = ' '
PI_ADD_ON_DATA                      =
I_FROM_CUSTOMERMASTER               = ' '
IMPORTING
E_KUNNR                             =
O_KNA1                              =
E_SD_CUST_1321_DONE                 =
TABLES
T_XKNAS                             =
T_XKNBK                             =
T_XKNB5                             =
T_XKNEX                             =
T_XKNVA                             =
T_XKNVD                             =
T_XKNVI                             =
    T_XKNVK                             = I_FKNVK
T_XKNVL                             =
T_XKNVP                             =
T_XKNZA                             =
T_YKNAS                             =
T_YKNBK                             =
T_YKNB5                             =
T_YKNEX                             =
T_YKNVA                             =
T_YKNVD                             =
T_YKNVI                             =
T_YKNVK                             =
T_YKNVL                             =
T_YKNVP                             =
T_YKNZA                             =
T_UPD_TXT                           =
EXCEPTIONS
   CLIENT_ERROR                        = 1
   KNA1_INCOMPLETE                     = 2
   KNB1_INCOMPLETE                     = 3
   KNB5_INCOMPLETE                     = 4
   KNVV_INCOMPLETE                     = 5
   KUNNR_NOT_UNIQUE                    = 6
   SALES_AREA_NOT_UNIQUE               = 7
   SALES_AREA_NOT_VALID                = 8
   INSERT_UPDATE_CONFLICT              = 9
   NUMBER_ASSIGNMENT_ERROR             = 10
   NUMBER_NOT_IN_RANGE                 = 11
   NUMBER_RANGE_NOT_EXTERN             = 12
   NUMBER_RANGE_NOT_INTERN             = 13
   ACCOUNT_GROUP_NOT_VALID             = 14
   PARNR_INVALID                       = 15
   BANK_ADDRESS_INVALID                = 16
   TAX_DATA_NOT_VALID                  = 17
   NO_AUTHORITY                        = 18
   COMPANY_CODE_NOT_UNIQUE             = 19
   DUNNING_DATA_NOT_VALID              = 20
   KNB1_REFERENCE_INVALID              = 21
   CAM_ERROR                           = 22
   OTHERS                              = 23
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    WAIT          = 'X'
IMPORTING
   RETURN        =
ENDIF.

i see this so much on this site, users just posting solved and not giving details on how they fixed the problem, the SDN is meant to be for sharing!!
If you find a fix, share it or don't bother being a part of the SDN community.(so annoying)

Lync 2011 for MAC searching contacts

Hi,
I have problem to search contacts in lync 2011 for MAC at more than one company, however Lync 2013 for Windows can searching contacts with the first letter.
Do you know about Microsoft Lync 2011 for Mac Bug?
Diego Riera | Linkedin |
Twitter |
diegoriera.wordpress.com
Por favor, lembre-se de clicar em "Marcar como Resposta" no post que o ajuda, e clique em "Desmarcar como resposta" se um post marcado na verdade não responder a sua pergunta. Isto pode ser benéfico para outros membros da comunidade. Esta
postagem é fornecida, sem garantias e sem direitos.

Can you add the contact by searching the SIP address?
Please check if the files GalContacts.db and GalContacts.db.idx are updated in Lync users’ profile folder.
I guess these files are not updated.
If this issue happens with several Lync users, you can copy these two files form users’ profile folder to replace the ones in problem Lync users’ profile folder to confirm that.
Try to run the command Set-CsClientPolicy –Identity -AddressBookAvailability WebSearchOnly, then sign out Lync for Mac and sign in, check if you can search the contacts.
Lisa Zheng
TechNet Community Support

An error has occurred while accessing SQL database or system resources. If this is the first time you have seen this message, please try again later. If this problem persists, please contact your administrator.

I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
is the first time you have seen this message, please try again later. If this
problem persists, please contact your administrator." When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields."
The last time I checked it was working, I'm not aware of any new updates installed recently? I did a full Profile Synchronization as well, but still not working, please advise? -- Evenstarline

Hi Sara,
First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account.  I
was able to do this way after we upgraded from SP 2007 to SP 2010 as well.   I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
my novice questions below?
1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
     Error generating in red towards top of the audience page..."One or more values typed on this page are not valid. Check the text for the indicated fields."
     Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm). Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"? I checked all
3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem? What does it do? And How do I run it?
4. I'm also new to viewing the ULS log. I'd just downloaded a viewer for it. I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
Admin is installed)? There's so many of them, what should I be looking for exactly?
Evenstarline

TS1292 Hey, im facing a problem while im using the purchesing , its showing me that: contact with apple support itunes???? Please help

Hey, im facing a problem while im using the purchesing , its showing me that: contact with apple support itunes???? Please help

Use the link below to contact iTunes support.
http://www.apple.com/emea/support/itunes/contact.html

Getting error as "Error occurred during your search, contact your system administrator" while using talent search in portal (TREX)

Hello Experts,
     We are facing an issue like when our Talent specialist are trying to use talent search through their portal they are getting an error like "Error occurred during your search, contact your system administrator" as shown below.
     We have checked in our backend and for all the talent specialist search results are showing successfully.
     Anyone of you kindly help us to get this sorted out.
Thanks & regards,
Sakthi

Hi Sarabjeet,
The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
I will check if I can find out any more specific info.
Daniel

Problems with Search in Contacts (Public folder favourite)

Office Version:Office 2010Operating System:Windows 7
I am running Outlook 2010, connecting to an SBS2003 server by HTTP and running in Cached mode.
My business contacts are stored in a Public Folder, and my personal contacts in my local Contacts folder.
The Public Folder is in my Favourites, and is designated an 'Outlook Address Book'
'Download Public Folder Favourites' is enabled in the Exchange Mail Account settings
I am having problems with Search (which was never a problem in Outlook 2007).
If I select the Contacts shortcut, under 'My Contacts I have listed in order:
Suggested Contacts
Office Contacts (this is my public folder favourite)
Contacts
Search Results
If I select the Office Contacts link, and attempt to search for a contact whose contact card I can actually see on the screen, the search will fail. The scope is defaulting to 'All Contact Items' (which is fine), but if I change this to 'Current Folder'
then the contact is immediately found.
In OL2007 I could search for a contact, even when not in a contact folder, and it would find every instance of it immediately.
Any ideas here? I have been told to rebuild my index, which I will do over the weekend as it will take some time. But I have doubts it will make much difference. This is a new machine with a fresh installation of Win7 x64 and Office 2010.
thanks

Keith, I have this same issue here. I looked on the Small Business Server pages for an answer as suggested by Xiu but could not find any. I'm not sure why this would be a SBS issue as we are not running SBS and have this issue.
For some reason, "All Contact Items" doesn't include the current folder if it is a public folder.
Did you ever get an answer/solution?

Can I search contacts while talking on the phone?

Can I search contacts while talking on the iPhone?

Assuming you have a 3G connection, put them on speakerphone then tap Contacts.
Message was edited by: deggie

Problem while sync iphone: some contact disappear

Good morning at all,
i have a problem while syncing my iphone with itunes. Itunes is the last release and iphone have the 6.1.2. Last week i connect the iphone to the Mac and, with suprise, i found that some of my new contacs added to my iphone is disappeared! I'm sure i added the only and for the first time to the Iphone and i didn't remove them neither intentionally nor accidentally. Now i disabled autosync to avoid the problem, but someone can help me to solve this? There is some way to recover lost contacs?
Using icloud is not an option because i often go in areas where 3G is missing and i found that icloud messing up a little with this situation.
Thanks in advice for any support!
Regards
Luca

If you want to erase everything on the old phone, go to Settings > General > Reset. You'll see an option to erase everything off the phone.

Searching contacts problem..... Please Help

I am new in Blackberry Support Community Forums.
I have Blackberry 8800 and about 15 days ago I had added a Very Important Contact. Now I had forgotten everything only I can remember is I had added Category as Friends and I am not able to search that contact in friends as I have about 500 contacts saved as friend. So is there is any other way to search this contact as it is very urgent..
Please help me. Can I search recently added contacts as this happens most times with me..

There is no option for Searching Recently Added Contacts in Blackberry.
But this is possible only if you install Zebrost Phonebook (ZPB) Software from Blackberry App World.
It enables to search contacts in all fields, for example you had added category as friends so you can also search in Friend Category and we can also search the recently added contacts.
For example if you want to search contact saved by you recently, then go to zpb in your Blackberry and go to Options>> Show Contacts>> Recently Added or you can directly type #a15 for searching contact in last 15 days, similarly if to want to search for the contacts saved in last month then just type #a30.
Try ZPB as it is available for free of cost.
All the best.

The following error occured while searching for on-premises exchange server

I've previously posted this under the Exchange Forums - Exchange Server 2010
I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter Ralphs

Thanks for the reply Larry
I've added more detail about the error, this server is exactly how I initially installed it. This was a clean install not a migration so Exchange was a new installation. I have not applied any service packs as I did not want to confuse matters
or compound the issue. I was wondering whether to install Server 2008 Service Pack 1 & the Exchange Service Packs. I will check the event logs & report back with what I find.
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter

Spotlight stops searching contacts

Hi, this one is a 'baffler' - new state of puzzlement.
After upgrading to Mountain Lion spotlight would occasionally stop searching my contacts, the artist previously known as Address Book. The Spotlight preference box for Contacts is ticked, and the Privacy tab does not have anything listed. Occasionally it would start searching Contact again after a re boot, but this is a mac and shouldn't need that. Now even that doesn't work, I can't get spotlight to search contacts at all. I have also added my HD to privacy, then removed it off forcing it to re index everything, which takes a while. It would work after that then stop after a few days.
I am normally not alone if ever I have a problem and find helpful solutions in forums etc. But alas, I seem to be on my lonesome on this cold dark night.
Any help appreciated, thanks.

I am on OS 10.8.2, All Latest Updates, MacBook Pro 17', SSD all maxed out.
I don't remember having this issue prior to OS 10.8.2, to which I Upgraded from 10.7.4.
I did not try Deleting any Files or Folder to fix this yet!
I did recently Signed Out and back Into iCloud while on call with AppleCare.
This issue of - Spotlight Stops Searching Contacts - comes and goes!
This issue existed before and after my Sign Out and Into iCloud!!!
Below is the Log of my Latest Research:
Thursday, November 15, 2012
Re-indexed Spotlight on my MacBook Pro by Dragging my Macintosh HD in and out of Privacy Tab in Spotlight!
54 minutes remaining at halfway point. Looks like it could be a two hour project!
That took 1hr 9min on my SSD!!!
Problem still exists
Time Machine Backup ran during Re-Indexing, but I decided to let it do its thing!
Unchecked Contacts in Spotlight
Restarted
Checked Contacts in Spotlight
Problem still exists - even if it worked for the l1nu5r post on Apple Discussions below
Saturday, November 17, 2012
After 2 SuperDuper Clone Backups + Time Machine Backup - All Contacts can be Searched in Spotlight!!!! The Issue Fixed itself - All Contacts could be Searched in Spotlight, but... That "success" lasted only for a day:)!
Sunday, November 18, 2012
After my SuperDuper Clone Backup, Contacts could not be found, even after UnMounted External HDs, turned them off and Restarted, and Shut Down my Mac twice!
I Edit a Contact and that Contact showed up in Spotlight, but only that Contact
I did a Safe Boot - Nothing in Spotlight was available except Web and Wikipedia
I Shut Down for 2 min and Restarted. Spotlight did some more Indexing for about 1 minute!
That Edited Contact showed up in Spotlight, but only that Contact
My Best Guess:
This issue appears to be related to iCloud!
I hope Apple is reading this and all our posts!
Apple is welcome to call me...
I will be calling AppleCare soon!
I hope All Our Dots Will Connect, so that this Issue is fixed!!!
Stay tuned!

A web developer problem while running a web application

Hi all,
I'm novice to J2EE.
I've encountered a problem while accessing the deployed module in weblogic 8.1 server.
I'm sure that the webapplication module is deployed as i saw my module in administration console & also the status said that it is deployed.
when i access my web application by specifying the proper server and port no and context root it is showing
either 505 - resource not found error(http://localhost:7001/Suresh-2/Suresh) or 404 - not found error.( http://localhost:7001/Suresh-2/Suresh)
Now let me elaborate what i've done till now.
My webapplication folder structure is : C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\classes\Sai\ServExamp.class
My servlet is ServExamp.java
I created a folder called "Suresh". In that folder created another folder called "WEB-INF". In WEB-INF created a folder called "Classes".
Since my servlet is in package "Sai", the .class file reside in \Suresh\WEB-INF\Classes\Sai\ServExamp.class
The source code is :
package Sai;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class ServExamp extends HttpServlet
public void doPost(HttpServletRequest req,HttpServletResponse res)throws IOException
PrintWriter out=res.getWriter();
java.util.Date today=new java.util.Date();
out.println("<html>"+"<body>"+
"<h1 align=center>HF\'s Chapter1 Servlet </h1>"
+"<br>"+today+"</body>"+"</html>");
Now i'm almost done creating a web application. Next, I constructed a simple web.xml descriptor that gives a web friendly name for my servlet, and points to the servlet. I constructed web.xml descriptor file in the WEB-INF folder (C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\).
The web.xml file source is :
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>Hello World Web Application</display-name>
<description>Test Servlet</description>
<servlet>
<servlet-name>ServExamp</servlet-name>
<servlet-class>Sai.ServExamp</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>ServExamp</servlet-name>
<url-pattern>/Suresh</url-pattern>
</servlet-mapping>
</web-app>
Now I have told Weblogic that the URI /Suresh corresponds to my servlet "Sai.ServExamp".
My Web Application is ready to be deployed at this point. I logged onto Weblogic's admin console,
1) clicked on deployments, then navigated to "Web Application Modules" .
2) Clicked "Deploy new Web Application Module"
3) Navigated to the location of your web application folder (Suresh). There was a radio button next to it indicating that I can select that folder as a valid web application.
4) I Clicked that radio button and clicked "Target Module".
5) It informed that my web application "Suresh" will be deployed to myServer.It asked a name for my web application deployment. By default it was "Suresh"
I clicked Deploy.
6) After deployment, my web application "Suresh" appeared in the "Web Application Modules" tree on the left.
I Clicked on "Suresh"( my web application) then clicked the testing tab, then clicked the link shown there(http://localhost:7001/Suresh-2).
It was not showing my servlet (showed a 403 error)
Error - 403
This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
I think so it came b'coz I don't have an index.html or index.jsp page.
7)Instead,I added my servlet on to the URL it provided.
http://localhost:7001/Suresh-2/Suresh
It is showing these error code: Http: 505 resource not allowed
The page cannot be displayed
The page you are looking for cannot be displayed because the address is incorrect.
Please try the following:
If you typed the page address in the Address bar, check that it is entered correctly.
Open the localhost:7001 home page and then look for links to the information you want.
Click Search to look for information on the Internet.
when i just type : http://localhost:7001/ -> Error 404 not found error
it's showing
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I want to run my web application & any help would be appreciated.
Thanks in advance.
with regards,
S.SayeeNarayanan.
Note: I even deployed my war file, which i got by execution of (jar cv0f webapp.war . ) command from the root directory of my web application i.e. Suresh
Then executed my webapplication it is showing
error-505 resource not allowed.
--------------------------------------------------------------------------------------------

try a fully qualified path to the pem file

Problem while Fetching BSAD

Hi to all ,
I' ve problem while fetching bsad for a report , in t-code se30 i've seen that it takes %89,1 performance of overall.
SELECT belnr buzei dmbtr blart budat augdt augbl sgtxt
   into table odemelerg
          FROM bsad
          WHERE bukrs EQ bukrs
            AND kunnr EQ kunnr
            AND ( umsks EQ space OR umsks IS NULL )
            AND ( umskz EQ space OR umskz IS NULL )
            AND augbl EQ i_augbl
            AND augdt GE i_budat
            AND gjahr EQ gjahr
            AND belnr NE i_belnr
            AND bsadbelnr NE bsadaugbl
            AND ( blart EQ blart_bt OR blart EQ blart_hf
                  OR blart EQ blart_mi ).
here : blart_bt is declared as a constant type and its value is 'BT'. such as blart_hf, blart_mi
How can I make this Select query working in a better performance
Kind regards,
Caglar

Hi
If you know the bill number:
-1) Search FI document:
Get header data
select * from bkpf where AWTYP = 'VBRK'
                     and AWKEY = BILL NUMBER.
EXIT.
ENDSELECT.
Get items data
SELECT * FROM BSEG INTO TABLE T_BSEG
                       WHERE BUKRS = BKPF-BUKRS
                         AND BELNR = BKPF-BELNR
                         AND GJAHR = BKPF-GJAHR
                         AND KOART = 'D'.
Payment:
LOOP AT T_BSEG WHERE AUGDT <> '00000000'.
IF T_BSEG-AUGBL <> _BKPF-BELNR
    T_BSEG-AUGDT <> _BKPF-BUDAT.
SELECT * FROM BKPF INTO _BKPF
                    WHERE BUKRS = T_BSEG-BUKRS
                      AND BELNR = T_BSEG-AUGBL
                      AND BUDAT = T_BSEG-AUGDT.
   EXIT.
ENDSELECT.
SELECT * FROM BSEG APPENDING TABLE T_PAYMENT
                       WHERE BUKRS = _BKPF-BUKRS
                         AND BELNR = _BKPF-BELNR
                         AND GJAHR = _BKPF-GJAHR
                         AND KOART = 'D'.
ENDIF.
ENDLOOP.
Partial payment
SELECT * FROM BSAD INTO TABLE WHERE BUKRS = BKPF-BUKRS
                                AND KUNNR = T_BSEG-KUNNR
                                AND REBZG = BKPF-BELNR
                                AND REBZJ = BKPF-GJAHR.
Max

Problem while searching contacts

Similar Messages

Maybe you are looking for