Problem while sending multiple messages to JDBC

hi
I am trying to run a scenario file to jdbc(multiple).
Inserting row into table with the file details and updating the same row.
I created 2 message mapping and 2 operation mapping. One mapping to insert row and second to updated the same row.
In ID did configuration 1 Sender Agreement, 2 Receiver Agreement ,1 Receiver Determination(Using Same system for both receiver), and 1 Interface Determination (selecting multiple operation mappings in this interface determination).
The scenario is processing successfully in moni and channel, Problem here is only UPDATE message is going to the Database always. In both the channels UPDATE message is going. I have checked "Maintain Order at Runtime" option also its not working.
Please help.

HI Jabbs,
Check help.sap.com, in receiver JDBC processing tab-> Maximum Concurrency
Enter the number of messages to be processed in parallel by the receiver channel. For example, if you enter the value 2, then two messages are processed in parallel. Default value is 1 and this means only one message can be processed at a time by the receiver channel.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/22/b4d13b633f7748b4d34f3191529946/frameset.htm
also paste here the receiver structure from MONI, so as to see whether the structure is as per the required format
Regards
Suraj

Similar Messages

Problem while sending the message using RWB

Dear All,
I am facing a problem while sending a message from RWB. I sent the message using Test Message in component monitoring, it says message sent but I am not able to see any message in sxi_monitor.
When I send the same message using the http client it successfully processed by XI and I can see the success message in sxi_monitor.
Please let me know if anyone has face similar kind of issue.
Thanks,
Alok
Edited by: Alok Raoka on May 26, 2008 5:08 PM

Dear All,
I am facing a problem while sending a message from RWB. I sent the message using Test Message in component monitoring, it says message sent but I am not able to see any message in sxi_monitor.
When I send the same message using the http client it successfully processed by XI and I can see the success message in sxi_monitor.
Please let me know if anyone has face similar kind of issue.
Thanks,
Alok
Edited by: Alok Raoka on May 26, 2008 5:08 PM

Problem in Sending Multiple Message by XMLSocket

Hi, I am getting error while sending multiple XML Object by XMLSocket.
When i send message in first time by XMLSocket then server reads fine. Otherwise from second time, server always read the first response. So where i am lagging for sending the message with different types.?

Hi, I am getting error while sending multiple XML Object by XMLSocket.
When i send message in first time by XMLSocket then server reads fine. Otherwise from second time, server always read the first response. So where i am lagging for sending the message with different types.?

Unusual problem while sending a message to many pe...

hi recently i found a strange problem in my phone.Whenever i send a message through groups or if i select and send it to like 10 ppl ,suddenly a error message pops up saying messaging already in use.It happens till the message is sent for each and every person and then stops.This problem started to arise after the firmware update.Please help me to solve this problem.

If the file is not generated dynamically, i.e. if it is static in a directory, why are you using servletoutputstream to read and send it to the browser? Why not just provide a href link to the file?

Sender Proxy to send multiple messages

Hello All XI experts,
I need your help to work for my scenario which is a Proxy-File .
I need to send data picked up from certain group of tables via sender proxy to XI.
The problem is that , we will be having thousands of records at the same time , so what we plan we can send the records via multiple messages in bunch of n no of messages rather sending the entire data in a single message.
Can you please help me in order to find a way by which we can achieve this in sender proxy ( to send multiple messages with each bunch having n no of messages ) .
Waiting for your expert thoughts and invaluable help.
Thanks,
Sunil

Hi
This scenario can be handled at abap end.
Decide the number of records you want to send in one file. In abap when the number of records reached then call the abap proxy method. For the remaining records again call the abap proxy method so while going to XI it will pass only the number of records desired by you.

Problem while sending IDOC to File Senario

Hi Experts
    I am having problem while sending the Idoc from SAP R/3 to File
   I have done all the setting in SAP as well in XI but while pushing IDOC
   I am getting error in the transaction sm58 in SAP R/3
" <b>The service for the client 300(My SAP R/3 client) is not present in Integration
Directory</b>"
I can any one explain me what to done on this....all the connections are fine
Waiting for Response
Adv points and thanx
Rakesh

Reason and Prerequisites
You send IDocs from system ABC to the exchange infrastructure (XI) of system XIZ, and error messages are issued in system ABC (Transaction SM58) for the IDOC_INBOUND_ASYNCHRONOUS function module.
This note proposes solutions for the following error messages:
a) No service for system SAPABC client 123 in the integration directory
b) Transaction IDX1: Port SAPABC, client 123, RFC destination
c) ::000
d) NO_EXEC_PERMISSION: "USER" "Business_System"
e) IDoc adapter inbound: Error error ...
Solution
a) Error message: No service for system SAPABC client 123 in the integration directory
Solution:
You send IDocs from system ABC to XI. In the control record of the IDoc, the SNDPOR field contains the value "SAPABC". The client of the sending system is determined by the MANDT field of the control record. The system ID and client are then used to determine a service without party of the type (business-system/business-service):
Business system
Activities in the System Landscape Directory (SLD)(Create technical system):
Create a technical system for system ABC in the SLD, and create the client for this. Do not forget to assign an "ALE logical system" (for example, "ABCCLNT123") to this technical system.
SLD (Business system):
You can now explicitly assign a business system to this client.
For more details, refer to the SLD documentation.
Activities in system ABC (self-registration in the SLD):
Alternatively, you can register the system in the SLD in system ABC with Transaction RZ70. You will find detailed information about the SLD registration of systems on the SAP Service Marketplace for the "Exchange Infrastructure" in the document "Exchange_Installation_Guide.pdf".
In system ABC, you can check your configuration with TransactionSLDCHECK.
Activities in Integration Directory (import business system from SLD):
You will find the business systems under Services Without Party in the Integration Services. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific identifiers".
Use the Import/Update button to copy the data from the SLD, to create business systems, or to update their identifiers.
Business service
Activities in the Integration Builder directory:
You want to create a service without party that is not part of your system infrastructure and is therefore not maintained in the SLD.
In the Integration Builder directory, you will find the "Business-Services" under Services Without Party. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific identifiers".
Activate the change list in Integration Directory.
In system ABC, you can restart the incorrect entry from Transaction SM58 .
b) Error message: Transaction IDX1: Port SAPABC, client 123, RFC destination
Solution:
The Integration Server tries to load the IDoc metadata from the sending system. The IDoc schemas from the Integration Repository cannot be used because they are release-dependent.
The sending system is determined by the value of the "SNDPOR" field from the IDoc control record (for example, "SAPABC").
Activities in the central XI system:
In Transaction IDX1, you can assign an RFC destination to the sending system (for example, "SAPABC"). This must be created beforehand in Transaction SM59.
Note that the IDoc metadata is cross-client data. In Transaction IDX1, only one entry must be maintained for each system. Only the lowest client is used by the runtime for Idoc metadata retrieval with RFC.
Ensure that only SAPABC and not "SAPABC_123" is entered in the port name.
c) Error message: "::000"
Solution:
This error occurs if the central XI system tries to load the IDoc metadata from the sending system by RFC.
There may be several different reasons for the failure of the metadata import, the error is not transferred in full by tRFC completely, and this results in the error message above.
User cannot log onto sending system
User/password/client is not correct or the user is logged due to too many failed logons.
Activities in sender system ABC:
Transaction SM21 contains entries for failed logons.
Activities in the central XI system:
Determine the sending port from the IDoc control record of the IDoc. If the ID of the sending system has the value "ABC", the value of the sending port is "SAPABC". You will find the RFC destination used for the "SAPABC" sending port with the lowest client in Transaction IDX1. In Transaction SM59, you will find the RFC destination containing the maintained logon data .
User does not have the required authorizations
Activities in the sender system ABC:
In Transaction SM21, you will find entries relating to authorization problems and more exact details.
Contact your system administrator and, if necessary, assign the user the required roles in user administration.
IDoctyp/Cimtyp cannot be loaded
Activities in sender system ABC:
In the sender system, you can check your IDoc types in Transaction WE30 (IDoc type editor) Take note not only of the errors, but also of the warnings.
The most common errors are:
- IDoc type or segments not released
- Segments that no longer exist are listed in the IDoc type
- Data elements that do not exist in the DDIC are assigned to fields
in the segment.
Contact your system administrator and correct these errors in the IDoc type.
d) Error message: NO_EXEC_PERMISSION: "User" "Business_System"
Solution:
You created a list of users in the directory who are authorized to use the "Business_System". The user in the error message is not on the list.
Alternatively, the same error is used if you have created a sender agreement with a channel of the IDoc type for the "Business_System" and the interface used. The user in the error message is not contained in the list of all authorized users defined there.
e) Error message: IDoc adapter inbound: Error error
Solution:
You send IDocs to the central XI system, where they are received by the IDoc adapter. The IDocs are converted into IDoc XML, and a corresponding XI message is generated and transferred to the XI Runtime Engine. The Engine tries to read its own business system from the "Exchange Profile". If the Exchange Profile is currently unavailable, the message is not processed and it is returned to the sending system with an error message.
Regard's
Prabhakar.....

Problem while assigning multiple staffing to project role.

Dear All,
I am facing problem while assigning multiple staffing to project role.
In the project role, we are doing staffing ( assigning BP). While assigning the BP's getting below errors.
Resource assignments overlap
Message no. DPR_BUPA_LINK004
Diagnosis
The validity period '10.02.2008'-'01.03.2008' for the assignment of project role Product Manager and ' Rakesh Pradhan' overlaps with the validity period of the assignment ''.
However, the project role type does not allow several staffings to be edited at the same time in the project role.
System Response
The system does not allow this constellation of data when saving.
Procedure
Check and correct the start and finish dates of the staffings affected.
Request you to advise in fiixng the issue.
Thank you for your cooperation.
Regards,
Ranjan

Hi Biplab,
For multiple staffings in the same time frame, check the option of 'Edit in Parallel' in the Role Type settings in SPRO.
Let me know if that helps.
Regards,
Vivek Pandey

Problem while Binding multiple Parameters to View Object[Solved]

Hello,
I am facing problem while binding multiple parameters with different data types in View Object query. For example suppose I have following query in my view object.
SELECT Header.ADDED_BY
Header.BATCH_ID,
FROM BATCH_HEADER Header
WHERE :1='deptAdmin' and Header.BATCH_ID
in
select batch_id from batch_header_dept_mapping where dept_id in(SELECT * FROM TABLE(CAST(:0 AS TABLE_OF_VARCHAR)))
I am able to pass the Bind variables of Array type for : 0 , using Steve's ArrayOfStringDomain example. (ArrayOfStringDomain) .
But after passing value to second bind parameter ie.. :1 .
I am getting the error as follows.
## Detail 0 ##
java.sql.SQLSyntaxErrorException: ORA-00932: inconsistent datatypes: expected - got CHAR.
I tried to set
setWhereClauseParam(1,11); // 11 is Number
setWhereClauseParam(0,arr); // arr is arr = new Array(descriptor,conn,deptid); for in parameter.
But of no use , Please let me know if any thing missing form me or have any another solutions. Also please provide me any example if have.
Thank you,
Sandeep
Edited by: user11187811 on Oct 23, 2009 7:27 AM
Edited by: user11187811 on Oct 26, 2009 12:52 AM
Edited by: user11187811 on Oct 26, 2009 6:51 AM

hi.
but when using non-Oracle named parameter binding styles as you've done (ie. , :1), regardless of what number you give each bind variable, they are sequenced 0, 1, 2 etc. As such your bind variable :1 is the 0th parameter, and your bind variable is the 1st parameter.Your statment is correct.
:1 i used was actually on 0th position and :0 was on 1 position. Like you said in sequence 0,1,2 etc. Now i get the answer and i corrected My mistake by assigning right values to right binding variable. and problem just solve.
Thanks Chris.

I cant use imessages, it tells me that it had an error while sending a message

i cant use imessages, it tells me that it had an error while sending a message, but it can do all the other things.

I have a third generation iPod touch, newest software version, wifi is on, address in contacts, phone number in contacts. I can start to send a message, it gets close to the end and then fails to deliver. I have read the trouble shooting guide and followed all directions. I can send from my iPad just fine, but not the iPod. Any ideals?

An error occurred while sending the message

I compose a email.When I click the send link ,an error occurs. The error page said "An error occurred while sending the message". Could anybody tell me what's wrong. Thanks.

Hi,
lsnrctl is not not able to start listener running on ports < 1024. Try starting the listener with the tnslsnr tool directly. My recommendation is to start it as root directly, so you don't have to set the s-bit.
<midtier_home>/bin/tnslsnr listener_es -u <uid> -g <grpid> &
Regards
Christian

Problem while sending the mail from sap

Hi experts,
                 I am facing some problem while sending mail from sap to external mail.
this is th code i am using but it is not working. plz check and tell me.
REPORT ZMAIL_DEMO.
data: maildata type sodocchgi1.
data: mailtxt type table of solisti1 with header line.
data: mailrec type table of somlrec90 with header line.
start-of-selection.
break-point.
clear: maildata, mailtxt, mailrec.
refresh: mailtxt, mailrec.
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test'.
maildata-obj_langu = sy-langu.
mailtxt-line = 'This is a test'.
append mailtxt.
mailrec-receiver = 'SOME MAIL ID'.
mailrec-rec_type = 'U'.
append mailrec.
call function 'SO_NEW_DOCUMENT_SEND_API1'
exporting
document_data = maildata
document_type = 'RAW'
put_in_outbox = 'X'
tables
object_header = mailtxt
object_content = mailtxt
receivers = mailrec
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
if sy-subrc = 0.   "( did not receive any mail) *
write : 'mail sent'.
endif.

Hi,
Please check with the following code.
TABLES: KNA1.
data for send function
DATA DOC_DATA LIKE SODOCCHGI1.
DATA OBJECT_ID LIKE SOODK.
DATA OBJCONT   LIKE SOLI OCCURS 10 WITH HEADER LINE.
DATA RECEIVER LIKE SOMLRECI1 OCCURS 1 WITH HEADER LINE.
SELECT * FROM KNA1 WHERE ANRED LIKE 'C%'.
WRITE:/ KNA1-KUNNR, KNA1-ANRED.
send data internal table
CONCATENATE KNA1-KUNNR KNA1-ANRED
                         INTO OBJCONT-LINE SEPARATED BY SPACE.
APPEND OBJCONT.
ENDSELECT.
insert receiver (sap name)
REFRESH RECEIVER.
CLEAR RECEIVER.
MOVE: 'any_email'_ TO RECEIVER-RECEIVER,                " SY-UNAME
        'X'      TO RECEIVER-EXPRESS,
        'U'      TO RECEIVER-REC_TYPE.
APPEND RECEIVER.
insert mail description
WRITE 'Sending a mail through abap'
                 TO DOC_DATA-OBJ_DESCR.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
     EXPORTING
          DOCUMENT_DATA              = DOC_DATA
     IMPORTING
          NEW_OBJECT_ID              = OBJECT_ID
     TABLES
          OBJECT_CONTENT             = OBJCONT
          RECEIVERS                  = RECEIVER
     EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          DOCUMENT_TYPE_NOT_EXIST    = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR            = 5
          X_ERROR                    = 6
          ENQUEUE_ERROR              = 7
          OTHERS                     = 8.

Problem while sending FAX through PRINT_TEXT    FM

Hi All,
I have a problem while sending a fax.
we are sending fax through the FM PRINT_TEXT.
Below is the FM we are passing paramenters.
CALL FUNCTION 'PRINT_TEXT'
       EXPORTING
            APPLICATION              = 'TX'
            DEVICE                   = 'TELEFAX'
            DIALOG                   = SPACE
            HEADER                   = fs_header
            OPTIONS                  = fs_popt
       IMPORTING
            RESULT                   = fs_pres
       TABLES
            LINES                    = <b>int_fax</b>
       EXCEPTIONS
            CANCELED                 = 1
            DEVICE                   = 2
            FORM                     = 3
            OPTIONS                  = 4
            UNCLOSED                 = 5
            UNKNOWN                  = 6
            FORMAT                   = 7
            TEXTFORMAT               = 8
            COMMUNICATION            = 9
            BAD_PAGEFORMAT_FOR_PRINT = 10
            OTHERS                   = 11.
if sy-subrc ne 0.
    p_flag = lit_x.
endif.
In INT_FAX internal table we have two fields one is tdformat second one is tdline
The lengh of the TDLINE is 132 char,Initially for all reocords we have only 108 char length,But according to user requirement we added one more field in taht
Now the lengh increased to 132 for each records.
When i checked in debugg mode the INT_FAX internal table have all 132 characters.
The problem is while checking in SOST trnasaction it is showing 108 characters in one line and remaining in second line,can you please help on this.
Thanks In advance
Sriman.

may it be that in those cases where it doesnt work, that you got no fax number?
Since it works soemtimes, it seems there are no errors, but rather in some cases some important info is missing, fax number may be one of thsoe important info in a FAX scenario.

Problem while sending unicode (utf-8) xml to IE.

Hi,
I have encoding problem while sending utf-8 xml from servlet to IE (Client), where i am parsing the xml using Ajax.
In the log I can see proper special characters that are being sent from the servlet. but when same is seen in the client end,, it is showing ? symbols instead of special charcters.
This is the code that sends the xml from servlet.
ByteArrayOutputStream stream = new ByteArrayOutputStream(2000);
transformer.transform(new DOMSource(document), new StreamResult(new OutputStreamWriter(stream, "iso-8859-1")));
_response.setContentType("text/xml; charset=UTF-8");
_response.setHeader("Cache-Control", "no-cache");
_response.getWriter().println(new String(stream.toByteArray(), "UTF-8"));
In the log i can see :
<response status="success" value="1154081722531" hasNextPage="false" hasPreviousPage="false" ><row row_id="PARTY_test_asdasd" column_0="PARTY_test_asdasd" column_1="asdasd �" mode="edit" column_en_US="asdasd �" column_de_DE="? xyz" column_fr_FR="" ></row></response>
But in the Client side I am able to see
<?xml version = '1.0' encoding = 'UTF-8'?>
<response status="success" value="1154082795061" hasNextPage="false" hasPreviousPage="false"><row row_id="PARTY_test_asdasd" column_0="PARTY_test_asdasd" column_1="asdasd ?" mode="edit" column_en_US="asdasd ?" column_de_DE="? xyz" column_fr_FR=""/></response>
I am getting ? instead of �.
It will be greatful if somebody tell how to send utf xml from servlet, for ajax purpose.
Thanks,
Siva1

This is the code that sends the xml from servlet.
ByteArrayOutputStream stream = new
ByteArrayOutputStream(2000);
transformer.transform(new DOMSource(document), new
StreamResult(new OutputStreamWriter(stream,
"iso-8859-1")));Here you produce XML that's encoded in ISO-8859-1. (!!!)
_response.setContentType("text/xml; charset=UTF-8");Here you tell the browser that it's encoded in UTF-8.
_response.getWriter().println(new String(stream.toByteArray(), "UTF-8"));Here you convert the XML to a String, assuming that it was encoded in UTF-8, which it wasn't.
Besides shooting yourself in the foot by choosing ISO-8859-1 for no good reason, you're also doing a lot of translating from bytes to chars and back again. Not only is that a waste of time, it introduces errors if you don't do it right. Try this instead:_response.setContentType("text/xml; charset=UTF-8");
_response.setHeader("Cache-Control", "no-cache");
_transformer.transform(new DOMSource(document_),
new StreamResult(_response.getOutputStream()));

How to rollback a traansacation if we got any problem while sending data to

how to rollback a traansacation if we got any problem while sending data to a webservice...

Is it SOA or OSB? Which version you are in..

Cant send multiple messages like group message

when i try to send multiple message in my group consist of 19 persons, it won't send it just tells "try again"
but when i try to forward a message consisting of 130 characters and up to my groups, it will send..
can someone explain to me why can't i send my message to my group?

Hi Skype Community,I am having the same issue on OS X 10.10.4 after getting Skype updated to version 7.10 (777). Please HELP to get this fixed. Thanks

Problem while sending multiple messages to JDBC

Similar Messages

Maybe you are looking for