Problem while sending to production

Hi friends,
I am working on module pool program. I have four includes in the program. I have completed that object and send to production. According to the basis consultant he asked me to changed the program name accordingly(Before sending to production) to the naming standards and I changed it, but the program is stored in the local object and the includes of the program have request number. The program (Includes) has been send to production.
Now my question is how to send the program which is under development client so that it should be with the appropriate includes in the production.
Regards,
Line

Hi,
Open each include associated with the program including the module pool program & screens.
For each object, click GOTO=>Object Directory Entry.
Replace package name $TMP with appropriate Package and click on Tick mark.
A pop will come for TR details. Enter the TR no.
Do above steps for all includes which you want to transport into the TR.
Provide the TR no. to Basis consultant.
Best regards,
Prashant

Similar Messages

Problem while sending the mail from sap

Hi experts,
                 I am facing some problem while sending mail from sap to external mail.
this is th code i am using but it is not working. plz check and tell me.
REPORT ZMAIL_DEMO.
data: maildata type sodocchgi1.
data: mailtxt type table of solisti1 with header line.
data: mailrec type table of somlrec90 with header line.
start-of-selection.
break-point.
clear: maildata, mailtxt, mailrec.
refresh: mailtxt, mailrec.
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test'.
maildata-obj_langu = sy-langu.
mailtxt-line = 'This is a test'.
append mailtxt.
mailrec-receiver = 'SOME MAIL ID'.
mailrec-rec_type = 'U'.
append mailrec.
call function 'SO_NEW_DOCUMENT_SEND_API1'
exporting
document_data = maildata
document_type = 'RAW'
put_in_outbox = 'X'
tables
object_header = mailtxt
object_content = mailtxt
receivers = mailrec
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
if sy-subrc = 0.   "( did not receive any mail) *
write : 'mail sent'.
endif.

Hi,
Please check with the following code.
TABLES: KNA1.
data for send function
DATA DOC_DATA LIKE SODOCCHGI1.
DATA OBJECT_ID LIKE SOODK.
DATA OBJCONT   LIKE SOLI OCCURS 10 WITH HEADER LINE.
DATA RECEIVER LIKE SOMLRECI1 OCCURS 1 WITH HEADER LINE.
SELECT * FROM KNA1 WHERE ANRED LIKE 'C%'.
WRITE:/ KNA1-KUNNR, KNA1-ANRED.
send data internal table
CONCATENATE KNA1-KUNNR KNA1-ANRED
                         INTO OBJCONT-LINE SEPARATED BY SPACE.
APPEND OBJCONT.
ENDSELECT.
insert receiver (sap name)
REFRESH RECEIVER.
CLEAR RECEIVER.
MOVE: 'any_email'_ TO RECEIVER-RECEIVER,                " SY-UNAME
        'X'      TO RECEIVER-EXPRESS,
        'U'      TO RECEIVER-REC_TYPE.
APPEND RECEIVER.
insert mail description
WRITE 'Sending a mail through abap'
                 TO DOC_DATA-OBJ_DESCR.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
     EXPORTING
          DOCUMENT_DATA              = DOC_DATA
     IMPORTING
          NEW_OBJECT_ID              = OBJECT_ID
     TABLES
          OBJECT_CONTENT             = OBJCONT
          RECEIVERS                  = RECEIVER
     EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          DOCUMENT_TYPE_NOT_EXIST    = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR            = 5
          X_ERROR                    = 6
          ENQUEUE_ERROR              = 7
          OTHERS                     = 8.

Problem while sending the message using RWB

Dear All,
I am facing a problem while sending a message from RWB. I sent the message using Test Message in component monitoring, it says message sent but I am not able to see any message in sxi_monitor.
When I send the same message using the http client it successfully processed by XI and I can see the success message in sxi_monitor.
Please let me know if anyone has face similar kind of issue.
Thanks,
Alok
Edited by: Alok Raoka on May 26, 2008 5:08 PM

Dear All,
I am facing a problem while sending a message from RWB. I sent the message using Test Message in component monitoring, it says message sent but I am not able to see any message in sxi_monitor.
When I send the same message using the http client it successfully processed by XI and I can see the success message in sxi_monitor.
Please let me know if anyone has face similar kind of issue.
Thanks,
Alok
Edited by: Alok Raoka on May 26, 2008 5:08 PM

Problem while sending FAX through PRINT_TEXT FM

Hi All,
I have a problem while sending a fax.
we are sending fax through the FM PRINT_TEXT.
Below is the FM we are passing paramenters.
CALL FUNCTION 'PRINT_TEXT'
 EXPORTING
 APPLICATION = 'TX'
 DEVICE = 'TELEFAX'
 DIALOG = SPACE
 HEADER = fs_header
 OPTIONS = fs_popt
 IMPORTING
 RESULT = fs_pres
 TABLES
 LINES = int_fax
 EXCEPTIONS
 CANCELED = 1
 DEVICE = 2
 FORM = 3
 OPTIONS = 4
 UNCLOSED = 5
 UNKNOWN = 6
 FORMAT = 7
 TEXTFORMAT = 8
 COMMUNICATION = 9
 BAD_PAGEFORMAT_FOR_PRINT = 10
 OTHERS = 11.
if sy-subrc ne 0.
 p_flag = lit_x.
endif.
In INT_FAX internal table we have two fields one is tdformat second one is tdline
The lengh of the TDLINE is 132 char,Initially for all reocords we have only 108 char length,But according to user requirement we added one more field in taht
Now the lengh increased to 132 for each records.
When i checked in debugg mode the INT_FAX internal table have all 132 characters.
The problem is while checking in SOST trnasaction it is showing 108 characters in one line and remaining in second line,can you please help on this.
Thanks In advance
Sriman.

may it be that in those cases where it doesnt work, that you got no fax number?
Since it works soemtimes, it seems there are no errors, but rather in some cases some important info is missing, fax number may be one of thsoe important info in a FAX scenario.

Problem while sending IDOC to File Senario

Hi Experts
 I am having problem while sending the Idoc from SAP R/3 to File
 I have done all the setting in SAP as well in XI but while pushing IDOC
 I am getting error in the transaction sm58 in SAP R/3
" The service for the client 300(My SAP R/3 client) is not present in Integration
Directory"
I can any one explain me what to done on this....all the connections are fine
Waiting for Response
Adv points and thanx
Rakesh

Reason and Prerequisites
You send IDocs from system ABC to the exchange infrastructure (XI) of system XIZ, and error messages are issued in system ABC (Transaction SM58) for the IDOC_INBOUND_ASYNCHRONOUS function module.
This note proposes solutions for the following error messages:
a) No service for system SAPABC client 123 in the integration directory
b) Transaction IDX1: Port SAPABC, client 123, RFC destination
c) ::000
d) NO_EXEC_PERMISSION: "USER" "Business_System"
e) IDoc adapter inbound: Error error ...
Solution
a) Error message: No service for system SAPABC client 123 in the integration directory
Solution:
You send IDocs from system ABC to XI. In the control record of the IDoc, the SNDPOR field contains the value "SAPABC". The client of the sending system is determined by the MANDT field of the control record. The system ID and client are then used to determine a service without party of the type (business-system/business-service):
Business system
Activities in the System Landscape Directory (SLD)(Create technical system):
Create a technical system for system ABC in the SLD, and create the client for this. Do not forget to assign an "ALE logical system" (for example, "ABCCLNT123") to this technical system.
SLD (Business system):
You can now explicitly assign a business system to this client.
For more details, refer to the SLD documentation.
Activities in system ABC (self-registration in the SLD):
Alternatively, you can register the system in the SLD in system ABC with Transaction RZ70. You will find detailed information about the SLD registration of systems on the SAP Service Marketplace for the "Exchange Infrastructure" in the document "Exchange_Installation_Guide.pdf".
In system ABC, you can check your configuration with TransactionSLDCHECK.
Activities in Integration Directory (import business system from SLD):
You will find the business systems under Services Without Party in the Integration Services. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific identifiers".
Use the Import/Update button to copy the data from the SLD, to create business systems, or to update their identifiers.
Business service
Activities in the Integration Builder directory:
You want to create a service without party that is not part of your system infrastructure and is therefore not maintained in the SLD.
In the Integration Builder directory, you will find the "Business-Services" under Services Without Party. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific identifiers".
Activate the change list in Integration Directory.
In system ABC, you can restart the incorrect entry from Transaction SM58 .
b) Error message: Transaction IDX1: Port SAPABC, client 123, RFC destination
Solution:
The Integration Server tries to load the IDoc metadata from the sending system. The IDoc schemas from the Integration Repository cannot be used because they are release-dependent.
The sending system is determined by the value of the "SNDPOR" field from the IDoc control record (for example, "SAPABC").
Activities in the central XI system:
In Transaction IDX1, you can assign an RFC destination to the sending system (for example, "SAPABC"). This must be created beforehand in Transaction SM59.
Note that the IDoc metadata is cross-client data. In Transaction IDX1, only one entry must be maintained for each system. Only the lowest client is used by the runtime for Idoc metadata retrieval with RFC.
Ensure that only SAPABC and not "SAPABC_123" is entered in the port name.
c) Error message: "::000"
Solution:
This error occurs if the central XI system tries to load the IDoc metadata from the sending system by RFC.
There may be several different reasons for the failure of the metadata import, the error is not transferred in full by tRFC completely, and this results in the error message above.
User cannot log onto sending system
User/password/client is not correct or the user is logged due to too many failed logons.
Activities in sender system ABC:
Transaction SM21 contains entries for failed logons.
Activities in the central XI system:
Determine the sending port from the IDoc control record of the IDoc. If the ID of the sending system has the value "ABC", the value of the sending port is "SAPABC". You will find the RFC destination used for the "SAPABC" sending port with the lowest client in Transaction IDX1. In Transaction SM59, you will find the RFC destination containing the maintained logon data .
User does not have the required authorizations
Activities in the sender system ABC:
In Transaction SM21, you will find entries relating to authorization problems and more exact details.
Contact your system administrator and, if necessary, assign the user the required roles in user administration.
IDoctyp/Cimtyp cannot be loaded
Activities in sender system ABC:
In the sender system, you can check your IDoc types in Transaction WE30 (IDoc type editor) Take note not only of the errors, but also of the warnings.
The most common errors are:
- IDoc type or segments not released
- Segments that no longer exist are listed in the IDoc type
- Data elements that do not exist in the DDIC are assigned to fields
in the segment.
Contact your system administrator and correct these errors in the IDoc type.
d) Error message: NO_EXEC_PERMISSION: "User" "Business_System"
Solution:
You created a list of users in the directory who are authorized to use the "Business_System". The user in the error message is not on the list.
Alternatively, the same error is used if you have created a sender agreement with a channel of the IDoc type for the "Business_System" and the interface used. The user in the error message is not contained in the list of all authorized users defined there.
e) Error message: IDoc adapter inbound: Error error
Solution:
You send IDocs to the central XI system, where they are received by the IDoc adapter. The IDocs are converted into IDoc XML, and a corresponding XI message is generated and transferred to the XI Runtime Engine. The Engine tries to read its own business system from the "Exchange Profile". If the Exchange Profile is currently unavailable, the message is not processed and it is returned to the sending system with an error message.
Regard's
Prabhakar.....

Problem while sending unicode (utf-8) xml to IE.

Hi,
I have encoding problem while sending utf-8 xml from servlet to IE (Client), where i am parsing the xml using Ajax.
In the log I can see proper special characters that are being sent from the servlet. but when same is seen in the client end,, it is showing ? symbols instead of special charcters.
This is the code that sends the xml from servlet.
ByteArrayOutputStream stream = new ByteArrayOutputStream(2000);
transformer.transform(new DOMSource(document), new StreamResult(new OutputStreamWriter(stream, "iso-8859-1")));
_response.setContentType("text/xml; charset=UTF-8");
_response.setHeader("Cache-Control", "no-cache");
_response.getWriter().println(new String(stream.toByteArray(), "UTF-8"));
In the log i can see :
<response status="success" value="1154081722531" hasNextPage="false" hasPreviousPage="false" ><row row_id="PARTY_test_asdasd" column_0="PARTY_test_asdasd" column_1="asdasd �" mode="edit" column_en_US="asdasd �" column_de_DE="? xyz" column_fr_FR="" ></row></response>
But in the Client side I am able to see
<?xml version = '1.0' encoding = 'UTF-8'?>
<response status="success" value="1154082795061" hasNextPage="false" hasPreviousPage="false"><row row_id="PARTY_test_asdasd" column_0="PARTY_test_asdasd" column_1="asdasd ?" mode="edit" column_en_US="asdasd ?" column_de_DE="? xyz" column_fr_FR=""/></response>
I am getting ? instead of �.
It will be greatful if somebody tell how to send utf xml from servlet, for ajax purpose.
Thanks,
Siva1

This is the code that sends the xml from servlet.
ByteArrayOutputStream stream = new
ByteArrayOutputStream(2000);
transformer.transform(new DOMSource(document), new
StreamResult(new OutputStreamWriter(stream,
"iso-8859-1")));Here you produce XML that's encoded in ISO-8859-1. (!!!)
_response.setContentType("text/xml; charset=UTF-8");Here you tell the browser that it's encoded in UTF-8.
_response.getWriter().println(new String(stream.toByteArray(), "UTF-8"));Here you convert the XML to a String, assuming that it was encoded in UTF-8, which it wasn't.
Besides shooting yourself in the foot by choosing ISO-8859-1 for no good reason, you're also doing a lot of translating from bytes to chars and back again. Not only is that a waste of time, it introduces errors if you don't do it right. Try this instead:_response.setContentType("text/xml; charset=UTF-8");
_response.setHeader("Cache-Control", "no-cache");
_transformer.transform(new DOMSource(document_),
new StreamResult(_response.getOutputStream()));

How to rollback a traansacation if we got any problem while sending data to

how to rollback a traansacation if we got any problem while sending data to a webservice...

Is it SOA or OSB? Which version you are in..

Line Alignment Problem while sending Fax from SAP Script

Moderator message: please do not post the same question in different forums
Hi Experts,
While sending fax the horizontal lines are not displaying till the end of the page.
But in the print preview the lines are displying till the end.
If this is printed using local printer the lines are printing fine but the problem is with the fax.
Please provide me a solution for this.
Regards,
Rajesh.
Edited by: Matt on Nov 25, 2008 2:51 PM

Puzzling.
I've seen where the printed output doesn't match the print preview but not a fax not matching a print.
Do you use SAPConnect or the older SAPComm method for faxing?
How do you produce the horizontal lines? BOX commands, ULINE, '-', etc.?

Problem while sending Abap list to mail in the background

Hi all,
I am sending abap list to email in the background.
My code as folllows:
DATA: so_ali LIKE solisti1 OCCURS 100 WITH HEADER LINE.
DATA: listobject LIKE abaplist OCCURS 0 WITH HEADER LINE.
DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
DATA: lt_user TYPE soud3 OCCURS 0 WITH HEADER LINE.
*Start of modification Tix 14411 for transport request D82K929044
DATA: it_user like SODLIENTI1 occurs 0 with header line.
*End of modification for Tix 14411 for transport request D82K929044
CLEAR: listobject, so_ali, objpack, objhead, objtxt, reclist, doc_chng.
REFRESH :
 listobject, so_ali, objpack, objhead, objtxt, reclist.
creation of the document to be sent
doc_chng-obj_name = 'BOFAREPORT'.
WRITE sy-datum TO doc_chng-obj_descr.
CONCATENATE 'Bank Activity Report for :'(025)
 company_itab_tr-company_code '-' doc_chng-obj_descr INTO
 doc_chng-obj_descr. "AN052799
objtxt = 'This is the bank activity report received for'(026).
APPEND objtxt.
CONCATENATE company_itab_tr-company_code '-'
 company_itab_tr-company_name '-'
 company_itab_tr-company_city INTO
 objtxt.
APPEND objtxt.
WRITE sy-datum TO objtxt.
CONCATENATE 'Date Received : '(027) objtxt INTO objtxt.
APPEND objtxt.
WRITE sy-uzeit TO objtxt.
CONCATENATE 'Time Received : '(028) objtxt INTO objtxt.
APPEND objtxt.
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
Creation of the entry for the compressed document
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
APPEND objpack.
Creation of the document attachment
CALL FUNCTION 'SAVE_LIST'
 EXPORTING
 list_index = '0'
 TABLES
 listobject = listobject
 EXCEPTIONS
 list_index_invalid = 1
 OTHERS = 2.
CALL FUNCTION 'TABLE_COMPRESS' "Schneller Tabellencopy
 TABLES
 in = listobject
 out = so_ali.
DESCRIBE TABLE so_ali LINES tab_lines. "objbin
objhead = 'BOFA-REPORT'. APPEND objhead.
Creation of the entry for the compressed attachment
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 1.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'ALI'.
objpack-obj_name = 'BOFAREPORT'.
objpack-obj_descr = 'Bank Activity Report'.
objpack-doc_size = tab_lines * 255.
APPEND objpack.
Completing the recipient list
SELECT * FROM zwfi_yefap_paypr WHERE
 bukrs = company_itab_tr-company_code.
 IF NOT ( zwfi_yefap_paypr-list1 IS INITIAL ).
 clear it_user[].
 CALL FUNCTION 'SO_DLI_READ_API1'
 EXPORTING
 DLI_NAME = zwfi_yefap_paypr-list1
 DLI_ID = ' '
 SHARED_DLI = 'X'
 IMPORTING
 DLI_DATA =
 TABLES
 DLI_ENTRIES = it_user
 EXCEPTIONS
 DLI_NOT_EXIST = 1
 OPERATION_NO_AUTHORIZATION = 2
 PARAMETER_ERROR = 3
 X_ERROR = 4
 OTHERS = 5
 IF SY-SUBRC = 0.
 loop at it_user.
 if it_user-member_typ = 'A'.
 reclist-receiver = it_user-member_adr.
 reclist-rec_type = 'U'.
 reclist-com_type = 'INT'.
 reclist-notif_del = 'X'.
 reclist-notif_ndel = 'X'.
 append reclist.
 elseif it_user-member_typ = ''.
 reclist-receiver = it_user-member_nam.
 reclist-rec_type = 'B'.
 reclist-express = 'X'.
 append reclist.
 Endif.
 endloop.
 ENDIF.
 ENDIF.
 IF NOT ( zwfi_yefap_paypr-list2 IS INITIAL ).
 clear it_user[].
 CALL FUNCTION 'SO_DLI_READ_API1'
 EXPORTING
 DLI_NAME = zwfi_yefap_paypr-list2
 DLI_ID = ' '
 SHARED_DLI = 'X'
 IMPORTING
 DLI_DATA =
 TABLES
 DLI_ENTRIES = it_user
 EXCEPTIONS
 DLI_NOT_EXIST = 1
 OPERATION_NO_AUTHORIZATION = 2
 PARAMETER_ERROR = 3
 X_ERROR = 4
 OTHERS = 5
 IF SY-SUBRC = 0.
 loop at it_user.
 if it_user-member_typ = 'A'.
 reclist-receiver = it_user-member_adr.
 reclist-rec_type = 'U'.
 reclist-com_type = 'INT'.
 reclist-notif_del = 'X'.
 reclist-notif_ndel = 'X'.
 append reclist.
 elseif it_user-member_typ = ''.
 reclist-receiver = it_user-member_nam.
 reclist-rec_type = 'B'.
 reclist-express = 'X'.
 append reclist.
 Endif.
 endloop.
 ENDIF.
 endif.
ENDSELECT.
CLEAR error_text.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
 EXPORTING
 document_data = doc_chng
 put_in_outbox = 'X'
 COMMIT_WORK = 'X'
 TABLES
 packing_list = objpack
 object_header = objhead
 contents_bin = so_ali "objbin
 contents_txt = objtxt
 receivers = reclist
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 operation_no_authorization = 4
 OTHERS = 99.
CASE sy-subrc.
 WHEN 0.
 write: / 'Result of the send process:'.
 LOOP AT reclist.
 write: / reclist-receiver(48), ':'.
 IF reclist-retrn_code <> 0.
 write 'The document was sent'.
 else.
 CONCATENATE 'The document could not be sent to : '(029)
 reclist-receiver(48) INTO error_text.
 ENDIF.
 ENDLOOP.
 WHEN 1.
 error_text = text-030.
 WHEN 2.
 error_text = 'Document could not be sent to any recipient'(031).
 WHEN 4.
 error_text = 'No send authorization'(032).
 WHEN OTHERS.
 error_text = 'Error occurred while sending'(033).
ENDCASE.
IF NOT ( error_text IS INITIAL ).
 CONCATENATE 'Mail send Error : '(034) error_text INTO error_text.
 PERFORM WRITE_LOG(YEFAP_APERAK) USING ERROR_TEXT.
 PERFORM write_log(zwfi_yefap_bank_report) USING error_text.
ENDIF.
CALL FUNCTION 'LIST_FREE_MEMORY'
 TABLES
 listobject = listobject
 EXCEPTIONS
 OTHERS = 1.
When I excute the same program in the foreground, Attachment in the mail is showing all the pages of the report output.
But when I excute the same program in the background only last page is shown in the mail attachemnt.
I think the problem is with the function module SAVE_LIST function module.
I replaced the SAVE_LIST function module with LIST_TO_MEMORY and LIST_FROM_MEMORY function modules.
It is also giving the same result.
In the foreground excution email attachemnt showing all the pages and in the background excution only last page is shown in the attachemnt.
I want all the pages dispalyed in the background mode excution in the email attachment.
How to slove this issue.
Thanks in advance.
Raja

I have seen this problem before. Please have a look at this example program. This works very well when ran in background as well as foreground
* This program works in the background,
report zrich_0003 .
data: maildata like sodocchgi1.
data: mailtxt like solisti1 occurs 10 with header line.
data: mailrec like somlrec90 occurs 0 with header line.
data: list type table of abaplist with header line.
data: ascilines(1024) type c occurs 0 with header line.
data: htmllines type table of w3html with header line.
parameters: p_check.
start-of-selection.
submit zrich_0004 exporting list to memory and return.
call function 'LIST_FROM_MEMORY'
 tables
 listobject = list
 exceptions
 not_found = 1
 others = 2.
call function 'LIST_TO_ASCI'
 tables
 listobject = list
 listasci = ascilines
 exceptions
 empty_list = 1
 list_index_invalid = 2
 others = 3.
call function 'WWW_HTML_FROM_LISTOBJECT'
 tables
 html = htmllines
 listobject = list.
clear: maildata, mailtxt, mailrec.
refresh: mailtxt, mailrec.
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test Subject'.
loop at htmllines.
 mailtxt = htmllines.
 append mailtxt.
endloop.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
call function 'SO_NEW_DOCUMENT_SEND_API1'
 exporting
 document_data = maildata
 document_type = 'HTM'
 put_in_outbox = 'X'
 tables
 object_header = mailtxt
 object_content = mailtxt
 receivers = mailrec
 exceptions
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 others = 8.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
commit work.
wait up to 2 seconds.
submit rsconn01 with mode = 'INT'
 with output = 'X'
 and return.
Regards,
Rich Heilman

PROBLEM WHILE SENDING MAILS TO MUTILPLE RECIPIENTS

hi,
while sending mails to multiple recipients,if any one of the mail id is invalid the mail is not being send to other valid mailids,how can this problem be resolved , so that other than the invalid recipient mail has to be send to other valid mailids

COULD YOU PLEASE STOP SHOUTING?
CAN YOU TALK LOUDER, I CAN'T HEAR YOU!

Problem while sending/Receiving request using the HttpURLConnection obj

Hi,
We are facing the problem while passing the request in Weblogic.
Looks like there is some problem with Weblogic while sending/Receiving the request using the HttpURLConnection object.
Currently we are migrating 2 applications to WebLogic. Application1 to application2 request should pass.
Below is some example we tried:
"When we send a request to our code using the SSOAdaptor code (which handles the request/session in our application) which is on the SunOne server the request parameters are received by our code successfully. And also in Create User Functionality of application1 we are sending a request to webpass(which is on Sunone Server) using the HttpURLConnection object and the SOAP request is received successfully by the Webpass."
Looks like when we send request (using HttpURLConnection) from a server other than Weblogic to a servlet in a Weblogic the request parameters are received with out issues.
Where as when the request is sent from WebLogic to WebLogic the request parameters are missing some how.
Is there any issue in Weblogic? Please helpus on this.
Thanks,
Nagesh
Edited by: user9307541 on Mar 15, 2010 5:08 AM

Hi,
Please find below scenario for testing.
We have tested the SSOAdaptor code (it is the fucntion name which will send the data from source) locally by hittiing the WPS adaptor URL in a Java client program(TestRequest.java) and the request parameters were reaching the WPS Adapter successfully.
Then we have written two test servlets to test the communication between SSOAdaptor(TestServlet.java) and WPS adaptor(WPSServlet.java).
Functionality of TestSevlet: It is sending a request to WPSServelt similar to the way we are doing it in SSOAdaptor.
Functionality of WPSServlet: It will receive the request parameters and write the parameter Map to console.
We have deployed and these two servlets(in a single webapplication) on Tomcat server and the request parameters are reaching the WPSServlet successfully.
Output on Tomcat server:
before sending request
**********************Inside WPS Servlet -- the request Map is:{TypeAcc=[Ljava.lang.String;@14e3f41, ServiceName=[Ljava.lang.String;@1acd47, GMEPortalUserID=[Ljava.lang.String;@19b04e2, UserID=[Ljava.lang.String;@5dcec6, Country=[Ljava.lang.String;@b25b9d}
after sending request
After this we have deployed these two servlets (with in a single webapplication) on the Weblogic server in Dev machine(path: /apps/usmport/domains/usmport/servers/usmport_admin/upload/ssoAdaptor/WEB-INF/classes/com/gm/gmeportal/security/adaptor) and
now the request parameters are not reaching the WPSServlet.
Output on Weblogic Server:
before sending request
**********************Inside WPS Servlet -- the request Map is:{}
after sending request
Looks like there is some problem with Weblogic while sending/Receiving the request using the HttpURLConnection object.
When we send a request to WPSAdaptor using the Old SSOAdaptor code which is on the SunOne server the request parameters are received by WPS successfully. And also in Create User Functionality of Portal we are sending a request to webpass(which is on Sunone Server) using the HttpURLConnection object and the SOAP request is received successfully by the Webpass.
Looks like when we send request (using HttpURLConnection) from a server other than Weblogic to a servlet in a Weblogic the request parameters are received with out issues. Where as when the request is sent from weblogic to weblogic the request parameters are missing some how.
Please find below javs source code used to test this:
TestRequest.java
import java.io.BufferedReader;
import java.io.DataOutputStream;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.HttpURLConnection;
import java.net.MalformedURLException;
import java.net.URL;
public class TestRequest {
     * @param args
     public static void main(String[] args) throws Exception{
          // TODO Auto-generated method stub
          excutePost("http://localhost:8080/Testing/TestServlet", "GMEPortalUserID=captest.wss@it0555&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
          //System.out.println("********** Now the request is from SSO *****************");
          //excuteGet("http://10.156.0.173:7013/channel21/wpsadapter", "GMEPortalUserID=captest.wss@it0554&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
     public static String excutePost(String targetURL, String urlParameters)
     URL url;
     HttpURLConnection connection = null;
     try {
     //Create connection
     url = new URL(targetURL);
     connection = (HttpURLConnection)url.openConnection();
     connection.setRequestMethod("POST");
     connection.setRequestProperty("Content-Type",
     "application/x-www-form-urlencoded");
     connection.setRequestProperty("Content-Length", "" +
     Integer.toString(urlParameters.getBytes().length));
     connection.setRequestProperty("Content-Language", "en-US");
     connection.setUseCaches (false);
     connection.setDoInput(true);
     connection.setDoOutput(true);
     //Send request
     DataOutputStream wr = new DataOutputStream (
     connection.getOutputStream ());
     wr.writeBytes (urlParameters);
     wr.flush ();
     wr.close ();
     //Get Response
     InputStream is = connection.getInputStream();
     BufferedReader rd = new BufferedReader(new InputStreamReader(is));
     String line;
     StringBuffer response = new StringBuffer();
     while((line = rd.readLine()) != null) {
     response.append(line);
     response.append('\r');
     rd.close();
     System.out.println("Response is:" + response);
     return response.toString();
     } catch (Exception e) {
     e.printStackTrace();
     return null;
     } finally {
     if(connection != null) {
     connection.disconnect();
     public static String excuteGet(String targetURL, String urlParameters) throws Exception
          URL url = new URL(targetURL);
          HttpURLConnection httpurlconnection =
               (HttpURLConnection) url.openConnection();
          /*httpurlconnection.setRequestProperty(
               "cookie",
               constructRequestParams(httpservletrequest.getCookies()));*/
          httpurlconnection.setDoOutput(true);
          httpurlconnection.setDoInput(true);
          httpurlconnection.setRequestProperty(
               "Content-length",
               String.valueOf(urlParameters.length()));
          OutputStream outputstream = httpurlconnection.getOutputStream();
          outputstream.write(urlParameters.getBytes());
          outputstream.flush();
          //Get Response
          try{
     InputStream is = httpurlconnection.getInputStream();
     BufferedReader rd = new BufferedReader(new InputStreamReader(is));
     String line;
     StringBuffer response = new StringBuffer();
     while((line = rd.readLine()) != null) {
     response.append(line);
     response.append('\r');
     rd.close();
     System.out.println("Response from SSO is:" + response);
     return response.toString();
     } catch (Exception e) {
     e.printStackTrace();
     return null;
     } finally {
     if(httpurlconnection != null) {
          httpurlconnection.disconnect();
TestServlet.java
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.HttpURLConnection;
import java.net.URL;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
* Servlet implementation class TestServlet
public class TestServlet extends HttpServlet {
     private static final long serialVersionUID = 1L;
* Default constructor.
public TestServlet() {
// TODO Auto-generated constructor stub
     * @see HttpServlet#doGet(HttpServletRequest request, HttpServletResponse response)
     protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          // TODO Auto-generated method stub
          doPost(request,response);
     * @see HttpServlet#doPost(HttpServletRequest request, HttpServletResponse response)
     protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          // TODO Auto-generated method stub
          //System.out.println("********************** the request Map is:" + request.getParameterMap());
          try {
               System.out.println("before sending request");
               excuteGet("http://localhost:7003/ssoAdaptor/WPSServlet", "GMEPortalUserID=captest.wss@it0554&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
               System.out.println("after sending request");
          } catch (Exception e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
     public String excuteGet(String targetURL, String urlParameters) throws Exception
          URL url = new URL(targetURL);
          HttpURLConnection httpurlconnection =
               (HttpURLConnection) url.openConnection();
          /*httpurlconnection.setRequestProperty(
               "cookie",
               constructRequestParams(httpservletrequest.getCookies()));*/
          httpurlconnection.setDoOutput(true);
          httpurlconnection.setDoInput(true);
          httpurlconnection.setRequestProperty(
               "Content-length",
               String.valueOf(urlParameters.length()));
          OutputStream outputstream = httpurlconnection.getOutputStream();
          outputstream.write(urlParameters.getBytes());
          outputstream.flush();
          //Get Response
          try{
     InputStream is = httpurlconnection.getInputStream();
     BufferedReader rd = new BufferedReader(new InputStreamReader(is));
     String line;
     StringBuffer response = new StringBuffer();
     while((line = rd.readLine()) != null) {
     response.append(line);
     response.append('\r');
     rd.close();
     //System.out.println("Response from SSO is:" + response);
     return response.toString();
     } catch (Exception e) {
     e.printStackTrace();
     return null;
     } finally {
     if(httpurlconnection != null) {
          httpurlconnection.disconnect();
WPSServlet.java
import java.io.IOException;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
* Servlet implementation class WPSServlet
public class WPSServlet extends HttpServlet {
     private static final long serialVersionUID = 1L;
* @see HttpServlet#HttpServlet()
public WPSServlet() {
super();
// TODO Auto-generated constructor stub
     * @see HttpServlet#doGet(HttpServletRequest request, HttpServletResponse response)
     protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          // TODO Auto-generated method stub
          System.out.println("**********************Inside WPS Servlet -- the request Map is:" + request.getParameterMap());
     * @see HttpServlet#doPost(HttpServletRequest request, HttpServletResponse response)
     protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          // TODO Auto-generated method stub
          doGet(request,response);
Thanks,
Nagesh

Problems while sending mail using java mail

hi all,
the following are the errors i get while sending a mail from my smtp local host-
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
import javax.mail.Authenticator;
import javax.mail.PasswordAuthentication;
public class SendEmail
 public static void main(String[] args)
System.out.println(args.length);
 if (args.length != 6)
 System.out.println("usage: sendmessage <to> <from> <smtphost> <true|false> <subject> <text>");
 System.exit(1);System.out.println("jj"+args.length);
 SendEmail m=new SendEmail();
 m.SendMessage(args[0],args[1], args[2], args[3], args[4], args[5]);
public static String SendMessage(String emailto, String emailfrom, String smtphost, String emailmultipart, String msgSubject, String msgText)
boolean debug = false; // change to get more information
String msgText2 = "multipart message";
boolean sendmultipart = Boolean.valueOf(emailmultipart).booleanValue();
// set the host
Properties props = new Properties();
props.put("mail.smtp.host",smtphost);
 props.put("mail.smtp.starttls.enable","true");
props.put("mail.smtp.auth", "true");
props.put("mail.smtp.sendpartial", "true");
Authenticator loAuthenticator = new SMTPAuthenticator();
System.out.println("f");
// create some properties and get the default Session
Session session = Session.getDefaultInstance(props, loAuthenticator );
session.setDebug(debug);
try
// create a message
Message msg = new MimeMessage(session);
// set the from
InternetAddress from = new InternetAddress(emailfrom);
msg.setFrom(from);
InternetAddress[] address =
new InternetAddress(emailto)
//InternetAddress ad=new InternetAddress(session);
msg.setRecipients(Message.RecipientType.TO, address);
System.out.println("fc");
msg.setSubject(msgSubject);
System.out.println("fvf");
if(!sendmultipart)
// send a plain text message
msg.setContent(msgText, "text/plain");
System.out.println("fif");
else
System.out.println("felsd");
// send a multipart message// create and fill the first message part
MimeBodyPart mbp1 = new MimeBodyPart();
mbp1.setContent(msgText, "text/plain");
// create and fill the second message part
MimeBodyPart mbp2 = new MimeBodyPart();
mbp2.setContent(msgText2, "text/plain");
// create the Multipart and its parts to it
Multipart mp = new MimeMultipart();
mp.addBodyPart(mbp1);
mp.addBodyPart(mbp2);
// add the Multipart to the message
msg.setContent(mp);
Transport transport = session.getTransport("smtp");
 transport.connect(smtphost,"[email protected]","xyz");
msg.saveChanges();
System.out.println("fconn");
 //transport.sendMessage(msg,msg.getAllRecipients());
transport.sendMessage(msg,msg.getAllRecipients());
transport.close();
//Transport.send(msg);
catch(MessagingException mex)
mex.printStackTrace();
return "Email sent to " + emailto;
class SMTPAuthenticator extends Authenticator
public PasswordAuthentication getPasswordAuthentication()
String username = "[email protected]";
String password = "xyz";
return new PasswordAuthentication(username, password);
i dont understand what the problem is..inspite of having the right code..
i guess some firewall problem..
can somebody help me please..il be highly obliged..thanks..

hi all,
the following are the errors i get while sending a mail from my smtp local host-
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
import javax.mail.Authenticator;
import javax.mail.PasswordAuthentication;
public class SendEmail
 public static void main(String[] args)
System.out.println(args.length);
 if (args.length != 6)
 System.out.println("usage: sendmessage <to> <from> <smtphost> <true|false> <subject> <text>");
 System.exit(1);System.out.println("jj"+args.length);
 SendEmail m=new SendEmail();
 m.SendMessage(args[0],args[1], args[2], args[3], args[4], args[5]);
public static String SendMessage(String emailto, String emailfrom, String smtphost, String emailmultipart, String msgSubject, String msgText)
boolean debug = false; // change to get more information
String msgText2 = "multipart message";
boolean sendmultipart = Boolean.valueOf(emailmultipart).booleanValue();
// set the host
Properties props = new Properties();
props.put("mail.smtp.host",smtphost);
 props.put("mail.smtp.starttls.enable","true");
props.put("mail.smtp.auth", "true");
props.put("mail.smtp.sendpartial", "true");
Authenticator loAuthenticator = new SMTPAuthenticator();
System.out.println("f");
// create some properties and get the default Session
Session session = Session.getDefaultInstance(props, loAuthenticator );
session.setDebug(debug);
try
// create a message
Message msg = new MimeMessage(session);
// set the from
InternetAddress from = new InternetAddress(emailfrom);
msg.setFrom(from);
InternetAddress[] address =
new InternetAddress(emailto)
//InternetAddress ad=new InternetAddress(session);
msg.setRecipients(Message.RecipientType.TO, address);
System.out.println("fc");
msg.setSubject(msgSubject);
System.out.println("fvf");
if(!sendmultipart)
// send a plain text message
msg.setContent(msgText, "text/plain");
System.out.println("fif");
else
System.out.println("felsd");
// send a multipart message// create and fill the first message part
MimeBodyPart mbp1 = new MimeBodyPart();
mbp1.setContent(msgText, "text/plain");
// create and fill the second message part
MimeBodyPart mbp2 = new MimeBodyPart();
mbp2.setContent(msgText2, "text/plain");
// create the Multipart and its parts to it
Multipart mp = new MimeMultipart();
mp.addBodyPart(mbp1);
mp.addBodyPart(mbp2);
// add the Multipart to the message
msg.setContent(mp);
Transport transport = session.getTransport("smtp");
 transport.connect(smtphost,"[email protected]","xyz");
msg.saveChanges();
System.out.println("fconn");
 //transport.sendMessage(msg,msg.getAllRecipients());
transport.sendMessage(msg,msg.getAllRecipients());
transport.close();
//Transport.send(msg);
catch(MessagingException mex)
mex.printStackTrace();
return "Email sent to " + emailto;
class SMTPAuthenticator extends Authenticator
public PasswordAuthentication getPasswordAuthentication()
String username = "[email protected]";
String password = "xyz";
return new PasswordAuthentication(username, password);
i dont understand what the problem is..inspite of having the right code..
i guess some firewall problem..
can somebody help me please..il be highly obliged..thanks..

Problem while sending FAX (Error Message 802 if checked in SOST)

Hi all,
I'm using FM SO_NEW_DOCUMENT_SEND_API1 to send Email and Fax through ABAP prog.
The Email is going fine but there is a problem in sending Fax, when i chek in SOST i get the following message.
Msg No 802 No delivery to 0091802299922, as recipient unknown.
This is my Fax No. +91 91-80-2299922
My selection screen is as follows
Email ID : External Email id
Fax No: 802299922 ( Passing Fax No in this format )
Country IND
The following is the code of my program, please show up some light on any mistake made in the same.
*& This is my Source Code
report z_email.
tables : somlreci1.
data : e_document_data like sodocchgi1,
e_document_type like soodk-objtp value 'RAW',
e_put_in_outbox like sonv-flag value 'X',
e_commit_work like sonv-flag value 'X'.
data : it_object_header type table of solisti1 with header line,
it_object_content type table of solisti1 with header line,
receivers type table of somlreci1 with header line.
data : i_lines type i.
select-options : s_mailid for somlreci1-receiver no intervals.
parameters : p_faxno type somlreci1-fax,
p_contry type somlreci1-country.
start-of-selection.
e_document_data-obj_name = 'Test'.
e_document_data-obj_descr = 'Email Test'.
e_document_data-obj_langu = sy-langu.
e_document_data-proc_type = '1'.
*--Information
it_object_content-line = 'This is a report used to send starts and'.
append it_object_content.
clear it_object_content.
it_object_content-line = ' stops to foreign distri. via E-Mail or Fax'.
append it_object_content.
clear it_object_content.
*--For Doc Size
describe table it_object_content lines i_lines.
e_document_data-doc_size = ( i_lines - 1 ) * 255 +
strlen( it_object_content ).
*--Email ID
loop at s_mailid.
receivers-receiver = s_mailid-low.
receivers-rec_type = 'U'.
append receivers.
clear : receivers.
endloop.
*--Fax
if p_faxno is not initial.
receivers-rec_type = 'F'.
receivers-fax = p_faxno.
receivers-country = p_contry.
receivers-com_type = 'TELFAX'.
append receivers.
clear : receivers.
endif.
*--Call function module
call function 'SO_NEW_DOCUMENT_SEND_API1'
exporting
document_data = e_document_data
document_type = e_document_type
put_in_outbox = e_put_in_outbox
commit_work = e_commit_work
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
tables
OBJECT_HEADER =
object_content = it_object_content
CONTENTS_HEX =
OBJECT_PARA =
OBJECT_PARB =
receivers = receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8
if sy-subrc = 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
commit work.
wait up to 2 seconds.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
write :/ 'Message sent successfully..!'.
endif.
Regards,
Balavardhan.K

Hi ,
I am facing similar problem , in case you have a resolution about the FAX number , then please let me know .
Thanks,
Abhishek
([email protected])

Problem while sending mail inOIM 11g r2 after usercreation

Hi,
By default OIM sends mail to user mail id when the user created. i have tested this scenario using test mail server, it is working fine . when i am trying this scenario using exchange mail server, it is throwing errors. for Exchange just i have changed IT resource parameters.
Authentication true
Server Name ip address of the Exchange server
User Login [email protected]
User Password *************
is there anything missing. for SMTP server is ums nedded ?.
<Oct 1, 2012 7:07:51 AM EDT> <Error> <oracle.iam.notification.impl> <BEA-000000> <Provider UMSEmailServiceProvider has encountered exception : javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: Connection refused>
<Oct 1, 2012 7:07:51 AM EDT> <Error> <oracle.iam.notification.impl> <BEA-000000> <Sending notification with Provider UMSEmailServiceProvider has encountered exception : Error occured while Sending Notification through Provider UMSEmailServiceProvider : javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: Connection refused>
<Oct 1, 2012 7:07:51 AM EDT> <Error> <oracle.iam.notification.impl> <BEA-000000> <Sending notification with Provider UMSEmailServiceProvider detailed exception : javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: Connection refused>
<Oct 1, 2012 7:07:52 AM EDT> <Error> <oracle.iam.notification.provider> <BEA-000000> <300>
<Oct 1, 2012 7:07:52 AM EDT> <Error> <oracle.iam.notification.impl> <BEA-000000> <Provider SOAEmailServiceProvider has encountered exception : java.lang.IllegalArgumentException: 300>
<Oct 1, 2012 7:07:52 AM EDT> <Error> <oracle.iam.notification.impl> <BEA-000000> <Sending notification with Provider SOAEmailServiceProvider has encountered exception : Error occured while Sending Notification through Provider SOAEmailServiceProvider : java.lang.IllegalArgumentException: 300>
<Oct 1, 2012 7:07:52 AM EDT> <Error> <oracle.iam.notification.impl> <BEA-000000> <Sending notification with Provider SOAEmailServiceProvider detailed exception : java.lang.IllegalArgumentException: 300>
<Oct 1, 2012 7:07:52 AM EDT> <Error> <oracle.iam.notification.impl> <BEA-000000> <Provider EmailServiceProvider has encountered exception : null>
Thanks,

Given below steps in oracle doc for UMS configuration. you can try the same
Configuring UMS Provider for Sending Notifications (Optional)
To configure Unified Messaging Service (UMS) provider for sending notifications:
Edit the oim-config.xml file by using MBeans. To do so:
Log in to Oracle Enterprise Manager.
Navigate to Identity and Access, oim.
Right-click oim(11.1.1.x.x), and select System MBean Browser.
In the System MBean Browser, navigate to Application Defined MBeans, oracle.iam, Server: oim_server1, Application:oim, XMLConfig, Config, XMLConfig.NotificationConfig, EmailProvider.
Click the EmailProvider attribute, and replace the value oracle.iam.notification.provider.EmailServiceProvider with oracle.iam.notification.provider.UMSEmailServiceProvider.
Click Apply.
Configure the Email Provider Instance - UMS IT resource with the UMS Web service details. To do so:
Login to Oracle Identity Manager Administrative and User Console, and navigate to Advanced Administration.
Click the Configuration tab, click Resource Management, and then click Manage IT Resource.
Click Search. The list of IT resources is displayed.
For the Email Provider Instance - UMS IT resource, click the Edit icon. The Edit IT Resource Details and Parameters page is displayed.
Specify values in the following fields:
Web service URL: The URL of the UMS web service to be invoked. For example, http://<SOA_host>:<SOA_Port>/ucs/messaging/webservice.
Policies: The OWSM policy attached to the given web service. Leave this field as blank.
Username: The username provided in the security header. If no policy is attached, then leave this field as blank.
Password: The password provided in the security header. If no policy is attached, then leave this field as blank.
Click Apply, and then close the popup window.
Configure UMS Server for using a mail server other than the local LINUX mail server, which is picked by default. For example, to setup the mail server to use stbeehive email server:
Stop the Linux Local sendmail email server running on the host, if this is a LINUX host, by running the following command:
/usr/local/redhat/packages/aime/ias/run_as_root "/sbin/service sendmail stop"
Configure Mail Server information in UMS Email Driver. To do so:
i. Login to Oracle Enterprise Manager.
ii. Expand User Messaging Service, and select usermessagingdriver-email (soa_server1).
iii. From the Driver-Specific Configuration list, select Email Driver Properties.
iv. Configure the following mandatory fields:
OutgoingMailServer: The name of the SMTP server, for example, mailserver.mycompany.com.
OutgoingMailServerPort: The port number of the SMTP server, for example, 465.
OutgoingMailServerSecurity: The security setting used by the SMTP server. Possible values can be None, TLS, or SSL.
OutgoingUsername: Any valid username similar to your mail client configuration, such as in the [email protected].
OutgoingPassword: The password used for SMTP authentication. This consists of the following fields:
Type of Password: Select Indirect Password, Create New User.
Indirect Username/Key: Enter a unique string, for example, OIMEmailConfig. This masks the password and does not expose it in clear text in the configuration file.
Password: Enter a valid password for this account.
v. Click Apply.
Right-click usermessagingdriver-email (soa_server1), and select Control, Shutdown.
Allow at least 2 minutes to pass, after which you can restart the email driver. To so so, right-click usermessagingdriver-email (soa_server1), and select Control, Restart.

Problem while sending mail inOIM 11g r2

HI,
i am getting following error while sending mail in OIM 11G r2
<Jun 13, 2012 12:53:25 AM PDT> <Warning> <oracle.adfinternal.view.faces.renderkit.rich.SelectItemUtils> <ADF_FACES-30118> <No help provider found for helpTopicId=create_user.>
java.net.MalformedURLException: For input string: "SOA_PORT"
at java.net.URL.<init>(URL.java:601)
at java.net.URL.<init>(URL.java:464)
at java.net.URL.<init>(URL.java:413)
at java.net.URI.toURL(URI.java:1081)
at oracle.j2ee.ws.common.transport.HttpTransport.transmit(HttpTransport.java:61)
at oracle.j2ee.ws.common.async.MessageSender.call(MessageSender.java:64)
at oracle.j2ee.ws.common.async.Transmitter.transmitSync(Transmitter.java:134)
at oracle.j2ee.ws.common.async.Transmitter.transmit(Transmitter.java:90)
at oracle.j2ee.ws.common.async.RequestorImpl.transmit(RequestorImpl.java:273)
at oracle.j2ee.ws.common.async.RequestorImpl.invoke(RequestorImpl.java:94)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:811)
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:235)
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:106)
at oracle.j2ee.ws.client.jaxws.WsClientProxyInvocationHandler.invoke(WsClientProxyInvocationHandler.java:254)
at $Proxy422.send(Unknown Source)
But it is known issue in OIM 11gr2 .
solution is The cause of this error is malformed URL. To resolve the issue, provide the correct values for SOA_PORT and SOA_HOST in Enterprise Manager (EM).
BUT i didn't find the SOA_PORT,SOA_HOST in EM console.
Thanks,
Edited by: 853559 on Sep 20, 2012 3:09 AM

. Follow the steps mentioned below to configure the workflow notification properties:
• Login to EM console as weblogic user.
• Expand SOA.
• Right click on <soa-infra> ANY ONE WILL BE REFLECTED. Select SOA Administration --> Workflow notification properties
• Select "Email" from “Notification Mode” list
• Provide notification service field values as:
o Email : From Address * : [email protected]
o Email : Actionable Address : [email protected]
o Email : Reply To Address: [email protected]
• Click Apply
• Click "Go to the Messaging Driver page" link
• Select configure driver: Provide Driver-Specific Configuration as:
o MailAccessProtocol : IMAP
o ReceiveFolder : INBOX
o OutgoingMailServer : smtp.sample.com
o OutgoingMailServerPort : 25
o OutgoingDefaultFromAddress : [email protected]
• Click Apply
If you are sending mail through xelsysadm account then change the value of “Email” field of that account .
Also configure Email Server ITResource .
Edited by: IAM_TECH on Sep 20, 2012 3:48 PM

Problem while sending to production

Similar Messages

Maybe you are looking for