Problem while starting the Dialog Instance

Hi all,
I've a Dialog instance on HPUX 11.23 under oracle. While starting the Dialog instance it starts and then shuts down. The contents of the /home/eepadm/startsap_D21.log are as below
Trace of system startup/check of SAP System EEP on Sat May 10 10:57:53 IST 2008
Called command: /usr/sap/EEP/SYS/exe/run/startsap
Starting SAP Instance D21
SAP-R/3-Startup Program Rel 640 V1.8 (2003/04/24)
Starting at 2008/05/10 10:57:53
Startup Profile: "/usr/sap/EEP/SYS/profile/START_D21_r3app3"
Execute Pre-Startup Commands
(5636) Local: /usr/sap/EEP/SYS/exe/run/sapmscsa -n pf=/usr/sap/EEP/SYS/profile/E
EP_D21_r3app3
/usr/sap/EEP/SYS/exe/run/sapmscsa: SCSA is attached and useable.
/usr/sap/EEP/SYS/exe/run/sapmscsa: finished.
(5639) Local: rm -f dw.sapEEP_D21
(5642) Local: ln -s -f /usr/sap/EEP/SYS/exe/run/disp+work dw.sapEEP_D21
(5645) Local: rm -f se.sapEEP_D21
(5648) Local: ln -s -f /usr/sap/EEP/SYS/exe/run/rslgsend se.sapEEP_D21
Starting Programs
10.05.2008 10:57:53
ShmDetach
FAIL: NIECONN_REFUSED (Connection refused), NiRawConnect failed in plugin_fopen(
(5654) Starting: local dw.sapEEP_D21 pf=/usr/sap/EEP/SYS/profile/EEP_D21_r3app3
(5655) Starting: local se.sapEEP_D21 -F pf=/usr/sap/EEP/SYS/profile/EEP_D21_r3ap
p3
(5635) Waiting for Child Processes to terminate.
Instance on host r3app3 started
Checking Installation
Starting IGS
[1] 5789
IGS on host r3app3 started
Not been able to understand why these errors are appearing, request help from someone in the group
Regards,
Alfred D'Souza

Hi,
We were trying to deploy HP's Port Aggregaton for 2 LAN cards, changes that were made were
1. Install the HP UX software patch fo the APA teaming LIcense.
2. Connected to a NORTEL Switch.
3. No application level changes done, except for some profile parameters that were changed, which I've reverted back and tried but to no luck
Execution of the command -  dpmon -p pf=EEP_D21_r3app3 gave the output as below
dpmon=>sapparam(2): fopenU("EEP_D21_r3app3","r"): No such file or directory
dpmon=>No Profile used.
dpmon=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sh: /usr/sap//SYS/exe/run/sapmscsa:  not found.
rslgwr1(16): I cannot get addr of SCSA.
SysLog:mQ0I20080510141317000456800000MO
      :                                                               0
      :SiPeekPendConn239                     NiPConnSiPeekPnixxi.cp8786
connection to dispatcher failed

Similar Messages

  • Problem while starting the Jdeveloper studio

    Hi,
    I have installed the Jdeveloper 11.1.2.0.0.
    But when I am starting the Jdeveloper Studio I am getting the error as "Unable to create an instance of the Java Virtual machine located at C:\Program Files\Java\jdk1.6.0_20\jre\bin\client\jvm.dll".
    I have install the JDK 6.0 Update 20 at C:\Program Files\Java Folder before installing the Jdeveoper.
    And I had mention C:\Program Files\Java\jdk1.6.0_20 path while installing Jdeveoper JDK location.
    To test whether JDK has been install properly or not I have also tested a sample java program and it worked.So I think there is no problem for JDK.
    But While starting the Jdeveloper Studio I am getting the above mentioned error.
    Can Someone is aware of this error? Or face this error at any stage?
    Please let me know the solution if knows
    Thanks,
    Shweta

    Hi,
    Changing the virtual memory option did not worked for me.
    I have found the following solution and it worked for me.
    In order to fix this type of error, go to installation_directoy\Middleware\JDeveloper\jdev\bin folder
    and edit file jdev.conf.
    Locate line "AddVMOption -XX:MaxPermSize=256M".
    Now add another line just below this line:
    AddVMOption -Xmx256M
    I found this solution at : javainnovations.blogspot.com/.../jdeveloper11g-startup-error.html
    It work for me.
    Thanks,
    Shweta

  • Getting error while starting the RAC instance through SRVCTL utility

    Hi DBA's,
    We are getting the below error while starting the Orcale 10g RAC instance on one of the node thru SRVCTL:
    oracle:/home/oracle]>srvctl start instance -d SQLTSTM2 -i SQLTSTM21
    PRKP-1001 : Error starting instance SQLTSTM21 on node r1racd
    CRS-1028: Dependency analysis failed because of:
    CRS-0223: Resource 'ora.SQLTSTM2.SQLTSTM21.inst' has placement error.
    :oracle:/home/oracle]>
    srvctl status database -d SQLTSTM2
    PRKO-2015 : Error in checking condition of instance on node: r1racd
    Instance SQLTSTM22 is running on node r2racd
    oracle:/opt/oracle/product/10.2.0/db]>
    NOTE: but i am able to start the instance thru SQLPLUS.
    After starting the instance thru SQLPLUS i checked the CRS_STAT -t . It shows the status offline... Please find the details below:
    Name Type Target State Host
    ora....21.inst application OFFLINE OFFLINE
    ora....22.inst application ONLINE ONLINE r2racd
    ora....VLM2.db application ONLINE ONLINE r2racd
    ora....21.inst application ONLINE ONLINE r1racd
    ora....22.inst application ONLINE ONLINE r2racd
    ora....STM2.db application ONLINE ONLINE r2racd
    ora....SM1.asm application ONLINE ONLINE r1racd
    ora....CD.lsnr application ONLINE ONLINE r1racd
    ora.r1racd.gsd application ONLINE ONLINE r1racd
    ora.r1racd.ons application ONLINE ONLINE r1racd
    ora.r1racd.vip application ONLINE ONLINE r1racd
    ora....SM2.asm application ONLINE ONLINE r2racd
    ora....CD.lsnr application ONLINE ONLINE r2racd
    ora.r2racd.gsd application ONLINE ONLINE r2racd
    ora.r2racd.ons application ONLINE ONLINE r2racd
    ora.r2racd.vip application ONLINE ONLINE r2racd
    Thanks in advance...
    Anil

    Use the 'srvctl config database -d ' command to check if the instance has been configured in the Oracle Cluster Registry; make sure that the GSDs are running on each node in the cluster.
    Also refere to Metalink note 295328.1

  • Problem while starting the weblogic managed server

    Hi,
    I am facing the following error while starting the managed weblogic server :
    weblogic.diagnostics.lifecycle.DiagnosticComponentLifecycleException: weblogic.store.PersistentStoreException:
    java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
    at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:66)
    at weblogic.diagnostics.lifecycle.DiagnosticFoundationService.start(DiagnosticFoundationService.java:107)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was an error while opening the
    file store file "WLS_DIAGNOSTICS000000.DAT"
    at weblogic.store.io.file.Heap.open(Heap.java:185)
    at weblogic.store.io.file.FileStoreIO.open(FileStoreIO.java:88)
    at weblogic.store.internal.PersistentStoreImpl.recoverStoreConnections(PersistentStoreImpl.java:332)
    at weblogic.store.internal.PersistentStoreImpl.open(PersistentStoreImpl.java:323)
    at weblogic.store.xa.PersistentStoreManagerXA.createFileStore(PersistentStoreManagerXA.java:104)
    at weblogic.store.xa.PersistentStoreManagerXA.createFileStore(PersistentStoreManagerXA.java:177)
    at weblogic.diagnostics.archive.DiagnosticStoreRepository.getStore(DiagnosticStoreRepository.java:85)
    at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:64)
    ... 4 more
    Caused by: java.io.IOException: [Store:280021]There was an error while opening the file store file
    "WLS_DIAGNOSTICS000000.DAT"
    at weblogic.store.io.file.StoreDir.throwIOException(StoreDir.java:214)
    at weblogic.store.io.file.StoreDir.open(StoreDir.java:104)
    at weblogic.store.io.file.Heap.open(Heap.java:183)
    ... 11 more
    Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11
    at weblogic.store.io.file.direct.DirectIONative.open(Native Method)
    at weblogic.store.io.file.direct.DirectFileChannel.<init>(DirectFileChannel.java:52)
    at weblogic.store.io.file.direct.DirectIOManager.open(DirectIOManager.java:139)
    at weblogic.store.io.file.StoreFile.openInternal(StoreFile.java:118)
    at weblogic.store.io.file.StoreFile.open(StoreFile.java:148)
    at weblogic.store.io.file.StoreDir.open(StoreDir.java:96)
    ... 12 more
    >
    The WebLogic Server encountered a critical failure
    Reason: Assertion violated
    Exception in thread "main" java.lang.NoClassDefFoundError: Could not initialize class
    weblogic.protocol.ServerIdentityManager$Initializer
    at weblogic.protocol.ServerIdentityManager.findServerIdentity(ServerIdentityManager.java:64)
    at weblogic.protocol.URLManager.findAdministrationURL(URLManager.java:172)
    at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:801)
    at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:423)
    at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:409)
    at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:187)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:458)
    at weblogic.Server.main(Server.java:67)
    Kindly suggest some solution for this.
    Best Regards,
    Varun

    Hi,
    I killed the processes hunged up and now m facing the following error while starting the managed weblogic:
    <Oct 12, 2012 3:01:53 AM PDT> <Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: java.lang.NoClassDefFoundError: com/thortech/util/logging/Logger.
    weblogic.security.service.SecurityServiceException: java.lang.NoClassDefFoundError: com/thortech/util/logging/Logger
    at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:342)
    at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
    Truncated. see log file for complete stacktrace
    Caused By: java.lang.NoClassDefFoundError: com/thortech/util/logging/Logger
    at com.thortech.xl.security.wl.XellerateAuthenticationProviderImpl.<clinit>(XellerateAuthenticationProviderImpl.java:73)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:247)
    at com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:51)
    at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)
    Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: com.thortech.util.logging.Logger
    at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
    Truncated. see log file for complete stacktrace
    >
    <Oct 12, 2012 3:01:53 AM PDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Oct 12, 2012 3:01:53 AM PDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

  • Problem when starting the SAO instance

    Hello,
    I am trying to start the sap instance and everytime i am getting the following error:
    Startup-Log is written to /home/sd1adm/startsap_SCS01.log
    /usr/sap/SD1/SCS01/exe/sapcontrol -prot NI_HTTP -nr 01 -function Start
    Instance on host SD1ODYLSV1 started
    Starting Startup Agent sapstartsrv
    Could not open the ICU common library.
       The following files must be in the path described by
       the environment variable "LD_LIBRARY_PATH":
       libicuuc.so.34, libicudata.so.34, libicui18n.so.34 [nlsui0_mt.c 1544] pid = 17963
    LD_LIBRARY_PATH is currently set to /usr/sap/SD1/DVEBMGS00/exe:/usr/sap/SD1/DVEBMGS00/exe:/usr/sap/SD1/DVEBMGS00/exe:/usr/sap/SD1/SYS/exe/run:/usr/sap/SD1/SYS/exe/uc/linuxx86_64:/oracle/client/10x_64/instantclient  [nlsui0_mt.c 1547] pid = 17963
    Startup of Instance Service failed
    See /home/sd1adm/startsap_DVEBMGS00.log for details
    when i chjnage the variable environment o point it to the Lib in question i get another error tellig that i can not start the DB and i have to start it from a remote server with the sd1adm.
    I am stratinghe instance using the sd1adm user.
    Therror appears after i upgraded to the newe kernel but when i went back to the old version i still have the same issue. I restarted the server but it didnt help.
    thanks for ur help.

    Hi,
    We were trying to deploy HP's Port Aggregaton for 2 LAN cards, changes that were made were
    1. Install the HP UX software patch fo the APA teaming LIcense.
    2. Connected to a NORTEL Switch.
    3. No application level changes done, except for some profile parameters that were changed, which I've reverted back and tried but to no luck
    Execution of the command -  dpmon -p pf=EEP_D21_r3app3 gave the output as below
    dpmon=>sapparam(2): fopenU("EEP_D21_r3app3","r"): No such file or directory
    dpmon=>No Profile used.
    dpmon=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    sh: /usr/sap//SYS/exe/run/sapmscsa:  not found.
    rslgwr1(16): I cannot get addr of SCSA.
    SysLog:mQ0I20080510141317000456800000MO
          :                                                               0
          :SiPeekPendConn239                     NiPConnSiPeekPnixxi.cp8786
    connection to dispatcher failed

  • Problems while starting the Managed Server through Node Manager..

    When I was trying to start a Managed Server using the Nodemanager , I am getting the following error :
    NodeManager not configured to receive commands from host : emis-develop
    I have the "nodemanager.hosts" file under the directory "c:\bea\wlserver6.1\config" and even while invoking the script for the startnodemanager , I am indicating this in the script ! Any ideas for this problem ??

    The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.> You may configure custom Identity and Trust in weblogic. It is not recommended to use Demo Trsut and Demo Identity for environments higher to Dev. -
    http://download.oracle.com/docs/cd/E14571_01/web.1111/e13707/identity_trust.htm#i1202182
    Regards,
    Anuj

  • Problem while starting the OC4JInstance

    Hi People,
    I have installed forms 6i with oracle 9i.when i tend to run my form i couldnt start OC4JInstance.it gets started and gets closed automatically.without OC4 its throwing me the error as,
    FRM-10142 HTTP listener is not running on computer_name at port 8888.start the listener or check for the runtime preferences.what should i do?.how to make OC4 stated properly?.can u please suggest me?.thanku
    Regards
    VIDS

    Hi Vidusnat,
    There is a forum for OC4j OC4J
    You might like to post this problem there as well to get the answer.
    Regards,
    Navnit

  • Problem while starting the oracle clusterware

    Hi,
    In my envirnoment there are two rac nodes. When both systems are shutdown state but when i start the system 1 (node1) the oracle clusterware does not start it give the error while running this command crs_stat -t crs cannot communicate.
    But when I start system 2 (node 2) the oracle clusterware starts.
    Can anyone help me out regarding this issue?
    Thank you for your cooperation.
    Regards,
    Adnan Hamdus Salam.

    Hi,
    No that is not the case. My oracle rac clusterware is perfectly working fine.
    In case 1 when both nodes are shutdown when I start node 2 the oracle clusterware starts and then I start node 1 the whole oracle rac clusterware up successfull.
    in case 2 when both nodes are shutdown when I start node 1 the oracle rac clusterware does not starts and then when I start node 2 the whole oracle rac clusterware up successfully.
    Regards,
    Adnan Hamdus Salam

  • Problem while starting the managed server

    Hi
    We have following configuration :-
    We have 2 physical sesrvers :-
    Server1 and Server2 in Sun Cluster running Solaris 10.
    We also have Oracle DB server 9.2.0.8 in RAC mode, one instance each on Server1 & Server2.
    Server 1 :-
    cluster1 :- 1 Managed Server running
    Server 2 :-
    cluster2 :- 1 Managed Server running
    we are getting following error in admin server log :-
    <Error> <NodeManager> <BEA-300034> <Could not execute command "kill" for server "cluster1" using the node manager. Reason: Connection refused. Couldn't connect to NodeManager. Check that it is running at localhost:5556.>
    Recently we have enabled the Connection Filter.
    also getting following info in logs :-
    <Notice> <Socket> <BEA-000445> <Connection rejected, filter blocked Socket[addr=192.193.164.8,port=53666,localport=8001], weblogic.security.net.FilterException: [Security:090220]rule 16>
    <Notice> <Socket> <BEA-000445> <Connection rejected, filter blocked Socket[addr=163.37.174.126,port=58284,localport=8002], weblogic.security.net.FilterException: [Security:090220]rule 17>
    Is it because of any misconfiguration in Connection filter ?
    Or filter is not allowing the request for ipaddress and port of Managed Server in cluster1
    Thanks in advance .. :)

    Thanks for the information.
    Node Manager is not used.
    I found problem in Connection filter.
    169.187.186.76 - address ManagedServer1
    169.187.186.77- address Managed server2
    169.187.186.51 :- Admin Server (8001 is http and 8002 is https)
    Tunneling is enable for Managed Server
    Please help me understanding below things is there any ambiguity in this rules :-
    In the script to stop Managed server we are using t3 protocol like : t3://ip:port but its not allowing t3 protocol .whereas t3 protocol is no where denied in rules.
    If I use https to issue request still not working
    <connection-filter>weblogic.security.net.ConnectionFilterImpl</connection-filter>
    <connection-filter-rule>127.0.0.1 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>172.16.0.129 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>172.16.1.1 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>169.187.186.59 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>169.187.186.51 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>169.187.186.76 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>192.168.10.4 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>172.16.4.1 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>169.187.186.77 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>169.187.186.60 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>172.16.0.130 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>172.16.1.2 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>192.168.10.5 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>172.16.4.2 169.187.186.51 8001 allow</connection-filter-rule>
    <connection-filter-rule>ocs1.in.citicorp.com 169.187.186.51 8002 allow https</connection-filter-rule>
    <connection-filter-rule>* 169.187.186.51 8001 deny</connection-filter-rule>
    <connection-filter-rule>* 169.187.186.51 8002 deny</connection-filter-rule>
    Thanks in Advance .......

  • Problem while starting the Oracle homeProcessManager service

    Hello world
    My machine got shut down abruptly following which , the above service is not starting. The startup type is set to automatic. When I try to start it, it says Service could not be started because it dint respond to the controller in a timely fashion.
    Help me :-(
    Regards
    Shantanu Dhanuka

    ipm.log :
    07/05/08 17:25:49 [4] Create pm state directory: D:\shantanu\OHS\oracle\product\10.2.0\db\opmn\logs\states
    07/05/08 17:25:49 [4] PM state file does not exist: D:\shantanu\OHS\oracle\product\10.2.0\db\opmn\logs\states\.opmndat
    07/05/08 17:25:49 [4] OPMN server ready. Request handling enabled.
    07/05/08 17:25:52 [4] Request 2 Started. Command: start
    07/05/08 17:25:52 [4] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1699020801:0)
    07/05/08 17:25:55 [4] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (1699020801:5524)
    07/05/08 17:25:55 [4] Request 2 Completed. Command: start
    07/05/09 09:35:27 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1699020801:5524) [The connection SSL receive timed out]
    07/05/09 17:18:55 [4] Request 4 Started. Command: stop
    07/05/09 17:18:55 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1699020801:5524)
    07/05/09 17:19:30 [4] Process Stopped: HTTP_Server~HTTP_Server~HTTP_Server~1 (1699020801:5524)
    07/05/09 17:19:30 [4] Request 4 Completed. Command: stop
    07/05/09 17:20:26 [4] Request 6 Started. Command: start
    07/05/09 17:20:26 [4] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1699020802:0)
    07/05/09 17:20:29 [4] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (1699020802:7192)
    07/05/09 17:20:29 [4] Request 6 Completed. Command: start
    services.log :
    07/05/25 10:23:05 Start
    Service timeout while waiting for OPMN to start.
    07/05/25 10:33:50 Start
    Service timeout while waiting for OPMN to start.
    07/05/25 10:45:19 Start
    Service timeout while waiting for OPMN to start.
    07/05/25 10:58:03 Start
    Service timeout while waiting for OPMN to start.
    07/05/25 11:04:59 Start
    Service timeout while waiting for OPMN to start.
    07/05/25 11:16:24 Start
    Service timeout while waiting for OPMN to start.
    07/05/25 11:24:44 Start
    Service timeout while waiting for OPMN to start.
    07/05/25 11:55:52 Start
    Service timeout while waiting for OPMN to start.
    07/05/25 12:41:57 Start
    Service timeout while waiting for OPMN to start.
    07/05/25 13:00:57 Start
    Service timeout while waiting for OPMN to start.
    Any thoughts?

  • Problem while starting the Eclipse

    Whenever i am trying to open Eclipse 3.0.1 its asking me to open the log file.The log file shows one error
    !SESSION ----------------------------------------------------------------------
    !ENTRY org.eclipse.core.launcher 4 0 Oct 10, 2006 16:43:15.624
    !MESSAGE Exception launching the Eclipse Platform:
    !STACK
    java.lang.ClassCastException: org.eclipse.osgi.framework.internal.core.BundleFragment
         at org.eclipse.osgi.framework.internal.core.PackageAdmin.getExportedBundles(PackageAdmin.java:127)
         at org.eclipse.osgi.framework.internal.core.PackageAdmin.initialize(PackageAdmin.java:86)
         at org.eclipse.osgi.framework.internal.core.Framework.initialize(Framework.java:241)
         at org.eclipse.osgi.framework.internal.core.Framework.<init>(Framework.java:126)
         at org.eclipse.osgi.framework.internal.core.OSGi.createFramework(OSGi.java:98)
         at org.eclipse.osgi.framework.internal.core.OSGi.<init>(OSGi.java:33)
         at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:69)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at org.eclipse.core.launcher.Main.basicRun(Main.java:279)
         at org.eclipse.core.launcher.Main.run(Main.java:742)
         at org.eclipse.core.launcher.Main.main(Main.java:581)
    Though my Eclipse 2.x works properly.Please help me out

    Does this look like an Eclipse forum?

  • Severe problem while starting Lenovo 3000 N200

    Dear friends & experts,
    I am using Lenovo 3000N200 0769BDG laptop. I have following problems while starting the system.
    Recently my system was hacked against which I installed an Anti-Malware software. It showed that the system was free from any Malware.(But believe me, it is true that the system was hacked.). But each time on starting the system, a  black and white window  is being displayed which contains the following message:
    We apologize for the inconvenience, but Windows didnot start successfully. A recent hardware or software change might have caused this.
    If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration  to revert to the most recent settings that worked.
    If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed , or if you aren't sure what caused the problem, choose Start Windows Normally.
    Safe  Mode
    Safe Mode with Networking
    Safe Mode with Command Prompt
    Last Known Good Configuration (your most recent settings that worked)
    Start Windows Normally
    Use the up and down arrow keys to move the highlight to your choice.
    Seconds until Windows starts:30.....1
    After 30 seconds, the Windows logo is displayed immediately followed by a Blue screen which lasts for 1 second and the system restarts.  I tried all the options listed above-- from Safe Mode to Start Windows Normally but the same problem recurrs. And the system doesn't shutdown until I press the power button.
    I have a licensed version of Windows Xp SP3 as OS. I tried to repair the system using WinXP CD but I found the following message:
    Setup did not find any hard disk drives installed in your computer.
    Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.
    Setup cannot continue. To quit Setup, press F3.
    A point to be noted is that earlier, I removed the Rescue & Recovery from my system  thinking that it might not be of much use and now, I lament for it.
    When I press F3 the same window appeared and the same problem recurred.
    I tried to access the files in my hard disk using Ubuntu CD and it was successful. I used Lenovo hardware quick test to check for any hardware faults, and my system passed all the tests.
    I request you to help me in solving this problem so that I can continue my studies peacefully.
    Thanking you,
    With regards,
    T.I. Kiran

    First off, being "hacked" and having viruses/malware are two different things. Someone hacking your computer doesn't really mean you have a virus/malware, it means an actual person gained access to your computer remotely and did something to it.
    More than likely you got a virus that corrupt your Windows System directory and/or registry. Anti-malware software won't necescarily detect all viruses, especially executable that run commands to simply delete files.
    The blue screen you're seeing is what us technicians call the BSOD (blue screen of death), it's an indication that there is a direct corruption with the core files that Windows requires to function properly.
    As an IT Technician, if this were one of my laptops or one of my end-users, I would simply reload it with a fresh copy of Windows XP. There's a possiblity that all data you had on the laptop is gone because if the Windows core files are corrupt/missing, then that could very well mean your system was wiped completely but the boot table is in tact, hence the fact that you even have the option to boot Windows XP.
    One other option I would suggest is try to reinstall Windows XP. Sometimes if you have the right copy of the install, it will let you reinstall the Windows XP core files, leaving your programs, files and directories in tact.
    Good luck.

  • Error while starting the Database

    Hi,
    I am getting the following error while starting the Database instance.
    ORA-03113: end-of-file on communication channel.
    How to fix this issue? i tried some of the options mentioned in docs in metalink. But still i am not able to fix.
    Anypointers on this is appreciated.
    Thanks & Regards,
    Srikanth

    Can you paste lines from alertlog file..

  • Exception while starting the weblogic10.0 server : getTransactionSupport

    We are in process of migrating the application from weblogic8 to weblogic10.0. we are facing some problem while starting the weblogic server, continously getting the exception like
    ####<31-Dec-2008 10:36:19 o'clock GMT> <Error> <<MessagingBridge> <blx25ao01> <aadev100-01><STANDBY ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)> <WLS Kernel> <1230719779233> <BEA-200044> <The following exception has occurred:
    java.lang.AbstractMethodError: getTransactionSupport
    at weblogic.jms.bridge.internal.MessagingBridge.startInternal(MessagingBridge.java:615)
    at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1030)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:464)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
    >
    Our application is using the JMS with MQ Queue to send and receive the message. but messages are not flown fron MQ Queue to JMS server..
    Please guide me on this..as we are in critical stage of implementation phase.

    You need to open a support case at support.bea.com or 888.232.7878 for urgent issues.

  • Problem while starting Weblogic 7.0..please help

    Hi,
    Im facing this problem while starting the weblogic.
    Below is the error i get...
    <Nov 3, 2006 6:11:29 PM IST> <Alert> <WebLogicServer> <000297> <Inconsistent security configuration, java.lang.Exception: Certificate expired or not yet valid:
    fingerprint = a48264011b8f3aeb13f64147821dc941, not before = Sat Nov 02 01:32:23 IST 2002, not after = Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California
    L=San Francisco O=BEA WebLogic CN=weblogic.bea.com [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certi
    ficate Authority Constraints [email protected] , key = modulus length=65, exponent length=3>
    java.lang.Exception: Certificate expired or not yet valid: fingerprint = a48264011b8f3aeb13f64147821dc941, not before = Sat Nov 02 01:32:23 IST 2002, not after
    = Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California L=San Francisco O=BEA WebLogic CN=weblogic.bea.com [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certificate Authority Constraints [email protected] , key = modulus length=65, exponent length=3 at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:219)
    at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:122)
    at weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1556)
    at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:891)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:300)
    at weblogic.Server.main(Server.java:32)
    <Nov 3, 2006 6:11:29 PM IST> <Emergency> <Security> <090034> <Not listening for SSL, java.io.IOException: Inconsistent security configuration, Certificate expir
    ed or not yet valid: fingerprint = a48264011b8f3aeb13f64147821dc941, not before
    = Sat Nov 02 01:32:23 IST 2002, not after = Mon Oct 16 01:32:23 IST 2006, holder = C=US SP=California L=San Francisco O=BEA WebLogic CN=weblogic.bea.com Email=s
    [email protected] , issuer = C=US SP=California L=San Francisco O=BEA WebLogic OU=Security CN=Demo Certificate Authority Constraints [email protected] , key =
    modulus length=65, exponent length=3.>
    I have updated my license.bea file also. the date of expiration="2006-12-02" ..
    Please suggest as to how to proceed
    Thanks and Regards
    SmitaUdupa

    Your server certificate expired. You need to update your identity keystore with a new certificate.
    The expired certificate was issued by the demo BEA certificate authority (CA). These certs are not adequate for production but if you want to take this approach for your new cert you'll have to use the BEA CertGen utility. Have a look at http://edocs.bea.com/wls/docs70/secmanage/ssl.html for more details.
    Your other option is to use Java's keytool utility to create a private key. You'd then generate a certificate signing request (CSR) that you'd send to a CA such as Verisign. You might even have a CA in-house. The CA will then send you a signed certificate that you load in your keystore. Assuming you've configured WebLogic to use this keystore you should be back in business with SSL.
    Mike
    Weblogic/J2EE Security Blog: http://monduke.com

Maybe you are looking for

  • Monitoring WebLogic Timer in WL 8.1

    Can Timers be monitored and tracked using WLST or from a JMX console. Under what circumstances would a timer stop publishing notifications: under load, OutOfMemory errors, internal errors etc.? Thanks!

  • Can't Import Footage 101 Unknown error

    Hi, we are having some problems moving captured clips from one system to another. Both systems are on the same version of FCP (6.0.2) and QT (7.4.1). The clips were captured to a scratch disk on an external drive, then moved to a second external driv

  • Wrv210 intermittent wifi on mac's

    i recently purchased a wrv210 router. it's got the latest (2.0.0.11) firmware. my windows based computers seem to work off the wifi without problem but my two mac's (an imac and a macbook pro) have intermittent wifi connection. they connect for some

  • Query giving no result as well as no error

    hi...good evening all... i have a database server in a machine. the clients which are connected to those reported me that they cannot execute any queries from the schema connected to that database. i have tried and got the same result. There was no e

  • Problems deleting application

    Hi All, we are working with OSGD 5.1 and Solaris SPARC. We created an application called "Cambio de contraseña", and since it seems that the "ñ" carachter is not recognized by OSGD, we are having problems now when launching applications. We can't del