Problem while switching color under selection

I get an error when I try to bring the default colors by pressing "D" then I try to swith them pressing "X" while I select some area.

I am interpreting that you loaded the new driver, made sure of the settings using nVidia board instead of Intel for Photoshop, and that the error is gone, right?
If you do get a crash again, (that is what happens when it asks you to close the program) please copy the information from the crash and post it here along with all the information above your serial number in the system information (from the main Photoshop menu, Hellp>System Info)
Thanks
Pattie
Reply from Kareem:
well the driver is 296.10 and I've two graphics boards one is intel and the other is nvidia.
also I made sure that photoshop runs on the nvidia's one.
something strange happend that the error is no longer been appears !!!
about the error message it just included that photoshop has stopped working and asked me to close the program.

Similar Messages

I m having ipad 4 and after upgrading to ios7 I m facing continuously rebooting problem while switching between apps can any buddy help or facing same problem

I m having ipad 4 and after upgrading to ios7 I m facing continuously rebooting problem while switching between apps can any buddy help or facing same problem

Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

MDIChildren flickering problem while switching between child form with dockstyle.fill and borderstyle.none

I have an mdi applicaton in Visual studio 2010 (.Net framework 4.0). I'm having a flickering problem when user switch between an MDI Child form. I'm declaring the child form then setting the borderstyle.none at design time and dock property to fill
through programming and make them a MDIChildren before I show them so that it takes up the entire space of the MDI Parent window without being maximized (client request).
i don't want to display control box(minimize, maximize,close) of child form in mdi parent form. (client request)
The problem is that when the child form is being displayed it is briefly shown in it's default size with icon and control box before being resized to fill the available area on the MDI Parent form. When a Child Form loads, you can see it in it's original
size (the size from Design-time) then all this flickering while maximizing .
In other words, child form show up in the client area of the MDIForm, not maximized, with a caption, very shortly, before they are finally filling the client area. there is a short flicker when a new form is created and displayed. This process is most noticeable
with a not-so-powerful PC or there are lots of control inside child form.
below is my code to show child form
MyChild1 c1 = new MyChild1();
c1.MdiParent = MdiMainParent;
c1.Dock = DockStyle.Fill;
c1.Show();
how can i solved the problem of flickering issue?
I tried many options which i have described below
1.double buffering.
2.set style property to child form
this.SetStyle(ControlStyles.UserPaint, true);
this.SetStyle(ControlStyles.AllPaintingInWmPaint, true);
this.SetStyle(ControlStyles.DoubleBuffer, true);
3. override below method in each child form
protected override CreateParams CreateParams
get
CreateParams cp = base.CreateParams;
cp.ExStyle |= 0x02000000;
return cp;
4. override below method in each child form
const int WM_NCPAINT = 0x85;
const int WM_SIZE = 0x05;
protected override void WndProc(ref Message m)
if (m.Msg == WM_NCPAINT)
if (this.WindowState == FormWindowState.Maximized)
return;
if (m.Msg == WM_SIZE)
if (this.WindowState == FormWindowState.Maximized)
return;
base.WndProc(ref m);
but I didn't see any effects. please someone help me to resolve flickering issue. thanks in advance.

Hi hardikvaishnav,
This is a known issue which has been reported to Microsoft Connect. Unfortunately, this issue will not fix due to stability issues around MDI. For more details, see
https://connect.microsoft.com/VisualStudio/feedback/details/97787/border-of-mdi-child-form-flashes-up-despite-formborderstyle-none.
You might use a user control or panel instead.
Best Regards,
Bob Wu [MSFT]
MSDN Community Support | Feedback to us

Problem while using color pattern matching

Currently we are doing projects on real time object tracking where we found one doubt that irrespective of the object size whether this color pattern match works or not . My questions are as follows:
1. Whether it is applicable for objects moving far . Because as it moves far, the size of the object decreases such that the color pattern matching is not working what will be solution since we must use color image
2. What is the difference in using scale and rotate invarient in color pattern matching
3. How we can effectively decrease the ROI depending upon the object position as per below attached screen shots .
we have removed boundary box values of X and Y coordinates at the four corner but we can't track as the object moves far away or we can't decrease the ROI as the object moves far.
4. whether it is possible to see the value of particular pixel in LABVIEW vision development module as we seen only the coordinate position . whether it is applicable to see particular pixel value. Guide us
please, see the below screen shots and provide the solution how effectively decrease or increase the ROI depending on objects position using color pattern match
Attachments:
problem in matching while object moves far.png ‏515 KB

Hello,
I have not been using the color pattern matching a lot (especially not in real-time). But since the pattern matching considers only small scale changes, you could try updating the color template every n-th iteration (depending on your setup and requirements). The major problem is the template size, since the color pattern matching tends to take quite a lot of time in learning the template. You would of course need to come up with some idea on how to change the subimage size, where the new template will be learned.
This is the part of coarse (rough) object detection as was suggested by MoviJOHN. For example, if your object is distinctly red, you can extract the green channel from your rgb image and use threshold to roughly find the object and apply the new ROI - template.
So:
1. learn the template,
2. use pattern matching with bounding rectangle (ROI) for the next couple of frames (you would need to experiment here where the detection fails -> how fast can you move the object away so that the detection fails),
3. Before the detection fails -> rough object detection with some padded bounding rectangle (new ROI),
4. Re-learn te template of new ROI and go back to 2.
Again, the biggest issue is the template learning time - if you have a high resolution camera and the template is large, this won't satisfy your real-time application.
You should set up the appropriate illumination first. The resolution is also important, since your object is moved back and forth (but the resolution will have a direct impact on the template learning time).
Best regards,
K
https://decibel.ni.com/content/blogs/kl3m3n
"Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."

Why when Apple could not find my problem while it was under warranty must I know pay for support after the warranty is up now that the problem is known it was misdiagnosed?

I brought my macbook pro into the the apple store and left if overnight around 6 weeks ago (warranty expired 3 weeks ago). They did everything that I DO at home and found nothing that was causing my infinite pinwheel. Since the pinwheel is typically hardware related, I want to know why more was not done considering my macbook pro was kept over night. It seems that there is some hardware failing. I reinstalled the OS to help and it did for about 2 weeks, but now, everything is back to pinwheel. I don't care if I have to pay for the Hard drive replacement, but I had zero resolution.
I already
- reinstalled OS
- repaired disk (there were some corrupt areas)
- repaired disk permissions (which is what the genius did)
- booted into safe mode and restarted
- turned power management off for the graphics (this did speed up the macbook a little)
besides my pinwheel, here are a few other symptoms
- when I click on the apple, it takes 5 seconds for the menu to show. in fact, it takes that long for any menu from the bar to show.
- when I try to open pages or word, it takes aroud 45 seconds
- using file open for browseing causes pinwheel
- when i try switching to an open program for editting (pages and word), the menu does not change to active application
- clicking on + to add a tab in safari causing pinwheel
- at log in screen, when attempting to type password, the first character causes pinwheel for over 1 minute.
- Once I am "logged in" when my desktop begins to show, any attempt to click on the apple logo to pull up system info or start activity monitor causs several minutes of pinwheel.
- cmd-tab does not work when pinwheel is showing
- 10 minutes after boot, nothing continues to respond
Now, the one thing I shoudl point out...the macbook was hanging during itunes update and now the persmissions cannot be fixed.
Here is the real kicker. I have bootcamp installed with windows 7. Everything works as designed in windows. No hangs, no freezes, fast apps, good video. In fact, I can listen to itunes, while havingt every MS office application open and multitask in them all with no system degredation.
So my real question that apple cannot answer and maybe a real genius can...How can I get my macbook to run as intended.
Can a Hard drive that is on the verge of breaking run the partitions and operating systems so differently? Is this what happens to the stage coach (macbook pro) at midnight (expired warranty)...it turns into a pumpkin (windows laptop).
Thanks for reading my vent and thanks in advance for any help.

I am very happy to report that my server connection tech, which I called via landline, informed me to : 1. Open Tools 2. Scan down to Clear Recent History 3. Delete All. That was it! Unbelievable! Six hours of searching through the Windows catagories. I checked the results on an internet site, and viola! It was gone! Mozilla Firefox seems to remember the usernames and passwords irregardless of the option window that asks if you if want it to remember the user and password. I finally got in touch with my friend and he said he did not answer yes to the window, even though he was aware of it. No damage. I surely do appreciate everyones' concern in this, now what seems to be, a very simple solution. Cudos to Firefox! Thank-you! P.S. I now have to enter my information at the beginning of any password protected sites...no harm done! My friend is now condemned to the 'user account' site! lol...

Problem while selecting BELNR from BSEG

Hi Experts,
I have a report performance problem while fetching BELNR from BSEG table.
I have to print latest BELNR from BSEG where BUZID = M but at the time of execution of report, It is taking too much time (More that hour and sometimes it gets hanged).
I have also gone through the comments provided by experts for previous problems asked in this forum e.g. BSEG is a cluster table that is why data retrieval takes long time etc.
Can any one has any other idea or suggestion or any other way to solve this problem
Regards,
Neeraj

Hi,
1) Try to create an index on BUZID field
2) Don't use SELECT/ENDSELECT statement. Instead of that extract all the concerned entries from BSEG into an internal table :
select belnr from bseg appending table itab where buzid = 'M'.
then do this :
sort itab by belnr.
describe itab lines n.
read table itab index n.
Please reward if helpful.
Regards,
Nicolas.

Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.

Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ...

Problem while saving an object under a dev class

hi all,
Here is a problem while saving an object under a development class.... I created a Z program (ZSORDER) through SE38 and while i was saving that Z program under a development class called SALES it shows an error message like <b>" customer object program ZSORDER can't be assigned to the package SALES"</b>..... can any one can explain what is the problem....

hi,
you should have created your package starting with the letters "Y" or "Z".
you have created it with the letter "s". SALES.
's' is reserved to be used by SAP.
so create the package with the letters 'y' or 'z' like 'ysales' and you wont be getting that problem.
try it.
warm regards,
Hari Kiran

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I hav

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I have viewed some videos and read numerous articles but haven't found the one to help me. Please point me in the best direction. Thank you Vincent TC

For the sake of clarity and to save people time, Todd is asking about the behaviour of the Patch tool when using it to repair the area next to the young lad's head. Todd gets a blurred dark tone pretty much regardless of the options he uses.
IMO that's what I would expect to happen because of the close proximity of the other image elements i.e. the lad's neck and the strong lines of his shirt. I would not choose to use the Patch tool in this situation. Content Aware Fill makes a better stab at it.

"Color Range" isn't even listed under "Select"?

"Color Range" isn't even listed under "Select"? I'm trying to isolate an image onto a white background, and the steps I'm following says
Select duplicated layer and go to Select > Color Range. Select white background with eye dropper and increase fuzziness to maximum amount.
BUT I don't even see that listed!

There's a clever trick to simulate it in PSE (credit to Douglas Nelson - third reply at http://www.clearps.com/photoshop-forum/index.php/m/283867/.
Select the color you want to select with eyedropper
Make a new solid color layer filled with the eyedropper color
Set the blending mode of that layer to Difference (everything in your original the color of your eyedropper color will now be black)
Use a Threshold adjustment layer to expand or contract the area to be selected.
Use magic wand (low tolerance, contiguous off) to select black areas
There's your color selection. You can hide or delete the layers created for this procedure as long as you don't deselect, and you'll still have your selection active.
To avoid accidental deselection, save the selection frequently.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Please help, i used to have various colors to select from when selecting FILL in Keynote such as red, now I only have a few pastel colors. I cannot seem to fix this problem to get the original colors back. Can someone please advise what I need to do.

Please help, i used to have various colors to select from when selecting FILL in Keynote such as red, now I only have a few pastel colors. I cannot seem to fix this problem to get the original colors back. Can someone please advise what I need to do.

i have on my ipad2 and re-download it - but I can't afford to loose the presentation that I currently have ....??
Are you using Keynote on an iPad?
If so you posted in the wrong forum, this is the Keynote Mac discussion and it is a different application. I dont know how the iPad works at all, so I cant help you, post in the Keynote iOS discussion.
If you are using a Mac, the colours palette is accesed by clicking on the colour well (arrowed) and then selecting a colour chip or changing the color in the colour wheel.

Re: [iPlanet-JATO] Experiencing problem while executing model.

Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]

Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]

Problem while adding SAP Netweaver 7.3 As Java in Solution Manager 7.1

Hi All,
We are facing strange problem while configuring managed system- SAP Netweaver 7.3 As Java in Solution manager 7.1 SP3. We added this system in SLD of solution manager and synchronized it with LMDB. As a result this As Java system is present under Technical systems in SMSY. Now we are assigning Product system to it with Landscape verification tool. But the problem is when we try to save after assigning Product version as SAP Netweaver and Product as SAP Netweaver 7.3. It always gives below error:
Fatal error trying to update Technical System (UPDATE_TSYSTEMS). Update could not be executed.
Product instance 54 not found
Product instance number error keep on changing depend upon what usage i select like ADS 7.3, Application Server Java 7.3 etc.
Please suggest if someone has faced this issue.
Thanks
Sunny

Hi Sunny,
You can refer to my first blog on this topic:
#sapadmin:: How to assign Product System in SOLMAN 7.1 & How LMDB, SLD, SMSY and Landscape Verification work in SOLMAN7.1
Try to select only one product instance in LMDB and saved. After that, you can add more product instance in SMSY.
Hope it helps.
Cheers,
Nicholas Chang

Problem while binding variable progmatically shared variable in RT

Hi All,
I have a problem while programaticaly binding the shared variable from RT controller.
The application scenario is as follows
I have three cFP controllers and two
server PCs in my application. Servers are implemented with Redundancy. If server
1 fails, server 2 will take care and vice versa. The cFP controller program is
intelligent enough to detect this switching and identify the active server.
I am using shared variable
communication for transferring the data between cFP and Active Server. This I am
achieving by binding the cFP variable to Server variables. I can bind server
variables to cFP variables also. But I have some advantage with first one rather
than second one.
Now, cFP Variable to Server Variable
binding I can do in two ways.
Right click the variable in Project
Explorer and select the network URL.
Other method is by programmatic
binding.
Now Programatic binding should be
done in cFP controller since cFP controller should bind to second server
whenever it detects switching.
For this, I tried with
SharedVariableIO property node like in the below attached diagram 1.
But I was getting a deployment error
shown in attached diagram 2.
The second method I tried is by
transferring a shared variable library cFP Library.lvlib to cFP through FTP and
opening the Library variable reference and by using the variable property node.
This way of binding was successful when I run from windows PC. But in RT
controller, it was giving me Error 1 while opening a
library.
I am attaching the code with this post
Summary of the problem is I am not able to progmatically bind variables from
RT Controllers
Kindly help me in solving this
problem.
Regards,
Blackperl
Message Edited by blackperl on 08-18-2008 08:29 AM
Message Edited by blackperl on 08-18-2008 08:31 AM
Attachments:
Code and Library.zip ‏27 KB
Diagram 1.jpg ‏15 KB
Diagram 2.jpg ‏25 KB

Hi All,
I have a problem while programaticaly binding the shared variable from RT controller.
The application scenario is as follows
I have three cFP controllers and two
server PCs in my application. Servers are implemented with Redundancy. If server
1 fails, server 2 will take care and vice versa. The cFP controller program is
intelligent enough to detect this switching and identify the active server.
I am using shared variable
communication for transferring the data between cFP and Active Server. This I am
achieving by binding the cFP variable to Server variables. I can bind server
variables to cFP variables also. But I have some advantage with first one rather
than second one.
Now, cFP Variable to Server Variable
binding I can do in two ways.
Right click the variable in Project
Explorer and select the network URL.
Other method is by programmatic
binding.
Now Programatic binding should be
done in cFP controller since cFP controller should bind to second server
whenever it detects switching.
For this, I tried with
SharedVariableIO property node like in the below attached diagram 1.
But I was getting a deployment error
shown in attached diagram 2.
The second method I tried is by
transferring a shared variable library cFP Library.lvlib to cFP through FTP and
opening the Library variable reference and by using the variable property node.
This way of binding was successful when I run from windows PC. But in RT
controller, it was giving me Error 1 while opening a
library.
I am attaching the code with this post
Summary of the problem is I am not able to progmatically bind variables from
RT Controllers
Kindly help me in solving this
problem.
Regards,
Blackperl
Message Edited by blackperl on 08-18-2008 08:29 AM
Message Edited by blackperl on 08-18-2008 08:31 AM
Attachments:
Code and Library.zip ‏27 KB
Diagram 1.jpg ‏15 KB
Diagram 2.jpg ‏25 KB

Facing some problem while configuring Workflow Manager 1.0.

Hi,
I am facing some problem while configuring Workflow Manager 1.0. in my farm.
Scenario is,
I have installed and configured workflow manager in my farm, it was working well with no issue. But one of team member played with AD and deleted Farm administrator's entry from AD by mistake. So suddenly workflows get affected and stopped working.
Then I added administrator entry in AD, uninstalled the Workflow Manager and installed it again. But now while configuring workflow manager I am facing some issues that "Failure to adding user in BUILTIN\Administrative group. Please add it manually"
And after sometime it shows another error message that, "Starting service Service Bus Massage broken failed: Timed out has expired, the operation has not been completed"
If I go for services then "Service bus Message broker" service is not running properly (Its status is just showing "Starting") and don't starts.
I have also added the user in BUILTIN\Administrator, IIS_IUSER, WSS_WPG group of the machine from computer manager - user and groups.
Also given permission to databases, and assign role of sysadmin and dbcreator to user
I also tried following steps
1) Stop all services associated to workflows
2) Uninstalled workflow manager
3) Deleted all databases associated with workflows
4) Installed workflow manager and tried to configure.
But showing same error.
If I use another SharePoint server farm to configure workflows, there I am not getting first error of adding user to BUILTIN\Administrator group. but second error remains same.
We having SQL server and Active directory at another machine and FARM at another machine, if I use local admin for configuration of the workflows (as local admin can start any services) but entry of local admin is not Active directory so can not assign SQL's
sysadmin, and dbcreator role to local admin.
I am attaching snapshot of error for better understanding.
Your help will be very precious to me.
Thanks,
Rajesh
Rajesh Agravat

Rajesh
Check to see what the service accounts are being used for these Workflow Manager 1.0 services:
Service Bus Message Broker
Service Bus Gateway
Workflow Manager Backend
All of these should be running and your workflow service account should be running all of these. If any are still configured under the old service account, they'll need to be updated. Next, check to see what service accounts have access to the
Workflow Manager 1.0 databases:
SbGatewayDatabase
SbManagement
SbMessageContainer
WFInstanceManagement
WFManagement
WFResourceManagement
The Workflow Manager service account should be mapped as the DBO for all of these. if any are still configured under the old service account, they'll need to be updated.
Given the complete loss of the original workflow service account, and the resultant impact on security configuration throughout the workflow farm, I would recommend performing a re-installation. Do it thus:
Launch Workflow Manager Configuration Wizard
Select the Leave Workflow Manager Farm
Stop all workflow services (see above list)
Repeat steps 1-3 for each instance of Workflow Manager 1.0 Server installed.
Delete all Workflow Manager databases (see above list).
reboot.
Start new installation.

Problem while switching color under selection

Similar Messages

Maybe you are looking for